eoACPwrAttributesWyePhaseIndex
POWER-ATTRIBUTES-MIB ·
.1.3.6.1.2.1.230.1.3.1.1
Object
column
Integer32
A phase angle typically corresponding to 0, 120, 240.
Context
- MIB
- POWER-ATTRIBUTES-MIB
- OID
.1.3.6.1.2.1.230.1.3.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- eoACPwrAttributesWyePhaseEntry
- Table
- eoACPwrAttributesWyePhaseTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-359
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eoACPwrAttributesWyePhaseToNeutralVoltage A measured value of phase to neutral voltage. IEC
61850-7-4 attribute 'PNV'. | column | 0.1 Volt AC SNMPv2-SMIInteger32 | .1.3.6.1.2.1.230.1.3.1.2 |
| eoACPwrAttributesWyeCurrent A measured value of phase currents. IEC 61850-7-4
attribute 'A'. | column | 0.1 amperes AC SNMPv2-SMIInteger32 | .1.3.6.1.2.1.230.1.3.1.3 |
| eoACPwrAttributesWyeActivePower A measured value of the actual power delivered to or
consumed by the load with the magnitude indicated
separately in eoPowerUnitMultiplier. IEC 61850-7-4
attribute 'W'. | column | watts SNMPv2-SMIInteger32 | .1.3.6.1.2.1.230.1.3.1.4 |
| eoACPwrAttributesWyeReactivePower A measured value of the reactive portion of the apparent
power with the magnitude of indicated separately in
eoPowerUnitMultiplier. IEC 61850-7-4 attribute 'VAr'. | column | volt-amperes reactive SNMPv2-SMIInteger32 | .1.3.6.1.2.1.230.1.3.1.5 |
| eoACPwrAttributesWyeApparentPower A measured value of the voltage and current determines
the apparent power with the indicated separately in
eoPowerUnitMultiplier. Active plus reactive power equals
the total appa… | column | volt-amperes SNMPv2-SMIInteger32 | .1.3.6.1.2.1.230.1.3.1.6 |
| eoACPwrAttributesWyePowerFactor A measured value ratio of the real power flowing to the
load versus the apparent power for this phase. IEC
61850-7-4 attribute 'PF'. Power Factor can be positive or
negative whe… | column | hundredths Integer32 | .1.3.6.1.2.1.230.1.3.1.7 |
| eoACPwrAttributesWyeThdCurrent A calculated value for the voltage total harmonic
distortion (THD) for phase to phase. Method of
calculation is not specified.
IEC 61850-7-4 attribute 'ThdA'. | column | hundredths of percent Integer32 | .1.3.6.1.2.1.230.1.3.1.8 |
| eoACPwrAttributesWyeThdPhaseToNeutralVoltage A calculated value of the voltage total harmonic
distortion (THD) for phase to neutral. IEC 61850-7-4
attribute 'ThdPhV'. | column | hundredths of percent Integer32 | .1.3.6.1.2.1.230.1.3.1.9 |