ZTE-AN-OTDR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
27
Rows
27
Columns
153

zxAnOtdrTestParamPrfTable

table
.1.3.6.1.4.1.3902.1083.5.2.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrTestParamPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrTestParamPrfTable' 
This table includes OTDR test parameter Profile information.
zxAnOtdrTestParamPrfEntry row .1.3.6.1.4.1.3902.1083.5.2.1.2.1
OTDR test parameter profile entry.
Indexes
Column Syntax OID
zxAnOtdrTestParamPrfName
OTDR test parameter profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.1
zxAnOtdrTestParamPrfMode
OTDR test mode.

When the mode is pulseMethod,
zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance,
zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfPulseWidth,
zxAnOtdrTestParamPrfDuration are v…
Enumerationr/w
Enumerated Values:
1pulseMethod
2sequenceMethod
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.2
zxAnOtdrTestParamPrfWaveLength
OTDR test wave length.
NanometersInteger32r/w
Constraints:
range: 1625-1650
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.3
zxAnOtdrTestParamPrfDistance
OTDR test distance.
MetersInteger32r/w
Constraints:
range: 500-300000
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.4
zxAnOtdrTestParamPrfFiberIor
OTDR test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6).
Integer32r/w
Constraints:
range: 1400000-1600000
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.5
zxAnOtdrTestParamPrfPulseWidth
OTDR test pulse width. '0' means not configured.
A value less than 200000 is mapped to an integer pulse width
value.
A value greater than 200000 is mapped to a specific pulse width
value.
e.g., The value 5 is mapped to …
NanosecondsInteger32r/w
Constraints:
range: 0-0
range: 5-300000
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.6
zxAnOtdrTestParamPrfDuration
OTDR test duration. '0' means not configured
SecondsInteger32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.7
zxAnOtdrTestParamPrfSeqCodeLen
OTDR test sequence code length.
The valid value is the power of two, For example:16,32,64.
'0' means not configured.
Integer32r/w
Constraints:
range: 0-0
range: 16-16384
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.8
zxAnOtdrTestParamPrfSeqCodeWidth
OTDR test sequence code width. '0' means not configured.
NanosecondsInteger32r/w
Constraints:
range: 0-0
range: 5-1275
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.9
zxAnOtdrTestParamPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.1.2.1.50

zxAnOtdrIfTable

table
.1.3.6.1.4.1.3902.1083.5.2.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrIfTable' 
This table includes OTDR test interface information.
zxAnOtdrIfEntry row .1.3.6.1.4.1.3902.1083.5.2.1.3.1
OTDR interface entry.
Indexes
Column Syntax OID
zxAnOtdrIfAlias
OTDR interface alias.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.5
zxAnOtdrIfFastTestParamPrf
OTDR fast test parameter profile name list, such as
'DEFAULT_PULSE,DEFAULT_SEQUENCE'.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.6
zxAnOtdrIfRoutineTestParamPrf
OTDR routine test parameter profile name list, such as
'DEFAULT_PULSE,DEFAULT_SEQUENCE'.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.7
zxAnOtdrIfHealthTestParamPrf
OTDR health test parameter profile name list, such as
'DEFAULT_PULSE,DEFAULT_SEQUENCE'.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.8
zxAnOtdrIfReflectorTestParamPrf
OTDR reflector test parameter profile name list,
such as 'DEFAULT_REFLECTOR'.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.9
zxAnOtdrIfNetworkPropertyPrf
OTDR interface network property profile name list.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.10
zxAnOtdrIfAcceptanceTestPrf
OTDR acceptance test parameter profile name list, such as
'DEFAULT_PULSE,DEFAULT_SEQUENCE,DEFAULT_ACCEPTANCE',
which are in order of decreasing priority.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.11
zxAnOtdrIfNetworkProperty
The network property of OTDR interface.
p2mp(1): the network of point to multi-points.
p2p(2): the network of point to point.
Enumerationr/w
Enumerated Values:
1p2mp
2p2p
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.17
zxAnOtdrIfWorkingStatus
The working status of OTDR interface.
Enumeration
Enumerated Values:
1testing
2idle
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.18
zxAnOtdrIfUsageStatus
The usage status of OTDR interface.
used(1): Health test has been run successfully.
unused(2): No test parameter profile is bound to the port and the
health test never runs.
preconfigured(3): Test parameter profile is b…
Enumeration
Enumerated Values:
1used
2unused
3preconfigured
4reserved
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.19
zxAnOtdrIfUsageStatusSwitch
The usage status switch of OTDR interface.
An unused status can be switched to reserved, and reserved status
can be switched to unused.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1switchToUnused
2switchToReserved
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.20
zxAnOtdrIfWorkMode
The working mode of OTDR interface.
When the mode is faultLocating, the interface can be used for
fault locating.
When the mode is nodeMonitoring, the interface can be used for
node monitoring.
When the mode is opticalP…
Enumeration
Enumerated Values:
1faultLocating
2nodeMonitoring
3opticalPowerMonitoring
4lineDetection
5bothwayTest
255unusable
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.21
zxAnOtdrIfBothwayTestPrf
OTDR bothway test parameter profile name list, such as
'DEFAULT_P2P'. Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.3.1.22

zxAnOtdrNetPropPrfTable

table
.1.3.6.1.4.1.3902.1083.5.2.1.4 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrNetPropPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrNetPropPrfTable' 
OTDR network property profile table.
zxAnOtdrNetPropPrfEntry row .1.3.6.1.4.1.3902.1083.5.2.1.4.1
OTDR network property profile entry.
Indexes
Column Syntax OID
zxAnOtdrNetPrfName
OTDR network property profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.1
zxAnOtdrNetPrfLinkType
OTDR link type.
p2mp(1): the network of point to multi-points.
p2p(2): the network of point to point.
Enumerationr/w
Enumerated Values:
1p2mp
2p2p
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.2
zxAnOtdrNetPrfFirstSplitRatio
OTDR first-level splitting ratio.
ratio1-x(20) : first-level splitting ratio is unknown.
none(255) : first-level splitting does not exist.
Enumerationr/w
Enumerated Values:
1ratio1-2
2ratio1-4
3ratio1-8
4ratio1-16
5ratio1-32
6ratio1-64
7ratio1-128
20ratio1-x
255none
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.3
zxAnOtdrNetPrfSecondSplitRatio
OTDR second-level splitting ratio.
ratio1-x(20) : second-level splitting ratio is unknown.
none(255) : second-level splitting does not exist.
Enumerationr/w
Enumerated Values:
1ratio1-2
2ratio1-4
3ratio1-8
4ratio1-16
5ratio1-32
6ratio1-64
7ratio1-128
20ratio1-x
255none
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.4
zxAnOtdrNetPrfThirdSplitRatio
OTDR third-level splitting ratio.
ratio1-x(20) : third-level splitting ratio is unknown.
none(255) : third-level splitting does not exist.
Enumerationr/w
Enumerated Values:
1ratio1-2
2ratio1-4
3ratio1-8
4ratio1-16
5ratio1-32
6ratio1-64
7ratio1-128
20ratio1-x
255none
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.5
zxAnOtdrNetPrfLinkLength
OTDR link length. Value 0 means unconfigured.
MetersInteger32r/w
Constraints:
range: 0-300000
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.6
zxAnOtdrNetPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.1.4.1.50

zxAnOtdrFastTestIfTable

table
.1.3.6.1.4.1.3902.1083.5.2.2.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFastTestIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFastTestIfTable' 
OTDR fast test interface table.
zxAnOtdrFastTestIfEntry row .1.3.6.1.4.1.3902.1083.5.2.2.1.2.1
OTDR fast test interface entry.
The OTDR fast test consists of two steps,
creating fast test ports(zxAnOtdrFastTestIfTable), and then
starting fast test(zxAnOtdrFastTestSn, zxAnOtdrFastTestAction).
NE restores to a prev…
Indexes
Column Syntax OID
zxAnOtdrFastTestIfSn
OTDR fast test serial number.
SNMPv2-TCDisplayString
Constraints:
range: 1-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.1
zxAnOtdrAcceptanceTestIfParamPrf
OTDR acceptance test parameter profile name list
chosen from zxAnOtdrIfAcceptanceTestPrf.
e.g. 'DEFAULT-PULSE','DEFAULT-PULSE,DEFAULT-SEQUENCE',
'DEFAULT-PULSE,DEFAULT-SEQUENCE,DEFAULT-ACCEPTANCE'.
If zxAnOtdrTestType i…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.2
zxAnOtdrFastTestIfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.50

zxAnOtdrFastTestIfStatusTable

table
.1.3.6.1.4.1.3902.1083.5.2.2.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFastTestIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFastTestIfStatusTable' 
OTDR fast test port status table.
zxAnOtdrFastTestIfStatusEntry row .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1
OTDR fast test interface status entry.
Indexes
Column Syntax OID
zxAnOtdrFastTestIfStatus
The result status of OTDR fast test.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
5stopped
6waiting
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.1
zxAnOtdrFastTestIfFailedReason
The OTDR fast test failed reason.
Enumeration
Enumerated Values:
1noError
2getTestParamsFailed
3communicationError
4apdAlarm
5noBindingProfile
6opticalSwitchFailed
7outOfMemory
8chipTestFailed
9algorithmError
10saveFileFailed
11testTimeout
12fiberNotConnected
13endToEndOpticalPowerLossLow
14waitTimeout
15preempted
255otherErrors
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.2
zxAnOtdrFastTestIfResultFile
Fast test result file name.
NE returns file name such as '1-1-5-1-20120505143302.csv' when the
fast test sucess.
NE returns empty string when the fast test failed.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.3
zxAnOtdrFastTestIfParamPrfs
Number of test parameter profile.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.4
zxAnOtdrFastTestIfFinishedPrfs
Number of finished test parameter profile.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.5
zxAnOtdrFastTestIfEvalTotalTime
OTDR test estimated total time.
SecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.6
zxAnOtdrFastTestIfElapsedTime
OTDR test elapsed time.
SecondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.7

zxAnOtdrFileFtpUploadStatusTable

table
.1.3.6.1.4.1.3902.1083.5.2.2.3.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFileFtpUploadStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFileFtpUploadStatusTable' 
OTDR file FTP status table.
zxAnOtdrFileFtpUploadStatusEntry row .1.3.6.1.4.1.3902.1083.5.2.2.3.2.1
File FTP status entry.
Indexes
Column Syntax OID
zxAnOtdrFileFtpUploadFileName
OTDR test file name.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.1
zxAnOtdrFileFtpUploadStatus
OTDR FTP status.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
 .1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.2
zxAnOtdrFileFtpUploadFailReason
OTDR FTP failed reason.
Enumeration
Enumerated Values:
1noError
2fileNotExists
3connectionFailed
255otherErrors
 .1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.3

zxAnOtdrRoutineTaskIfTable

table
.1.3.6.1.4.1.3902.1083.5.2.3.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrRoutineTaskIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrRoutineTaskIfTable' 
OTDR routine task interface table.
zxAnOtdrRoutineTaskIfEntry row .1.3.6.1.4.1.3902.1083.5.2.3.2.1
OTDR routine task interface entry.
The OTDR routine test consists of two steps,
creating routine test ports (zxAnOtdrRoutineTaskIfTable), and then
configuring routine task (zxAnOtdrRoutineTaskTable).
NE restores to a pr…
Indexes
Column Syntax OID
zxAnOtdrRoutineTaskIfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.3.2.1.50

zxAnOtdrRoutineTaskTable

table
.1.3.6.1.4.1.3902.1083.5.2.3.3 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrRoutineTaskTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrRoutineTaskTable' 
Routine test task table.
zxAnOtdrRoutineTaskEntry row .1.3.6.1.4.1.3902.1083.5.2.3.3.1
Routine test task entry.
Indexes
Column Syntax OID
zxAnOtdrRoutineTaskName
OTDR routine test task name.
SNMPv2-TCDisplayString
Constraints:
range: 1-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.1
zxAnOtdrRoutineTaskStartTime
The start time of OTDR routine test.
For example:yyyy-mm-dd HH:MM:SS.(2013-01-01 00:00:00).
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.2
zxAnOtdrRoutineTaskInterval
The interval of OTDR routine test.
The NE returns 0, when zxAnOtdrRoutineTaskTestMode is
sequential test.
MinutesInteger32r/w
Constraints:
range: 0-525600
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.3
zxAnOtdrRoutineTaskActiveStatus
OTDR routine test task active status.
Enumerationr/w
Enumerated Values:
1activated
2stopped
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.4
zxAnOtdrRoutineTaskCurrStartTime
The current routine test task start time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.5
zxAnOtdrRoutineTaskOperStatus
OTDR routine test task operational status.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
5suspended
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.6
zxAnOtdrRoutineTaskFailedReason
The OTDR routine test task failed reason.
Enumeration
Enumerated Values:
1noError
2getTestParamsFailed
3communicationError
4apdAlarm
5allPortsTestFailed
6packFileFailed
7ftpFailed
8ftpServiceUnconfigured
255otherErrors
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.7
zxAnOtdrRoutineTaskResultFile
Routine test result file name.
NE returns file name such as 'taskname-20120505143302.zip' when
the routine test sucess.
NE returns empty string when the routine test failed.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.8
zxAnOtdrRoutineTaskTestMode
Routine task test mode.
Enumerationr/w
Enumerated Values:
1periodicalTest
2sequentialTest
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.9
zxAnOtdrRoutineTaskRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.3.3.1.50

zxAnOtdrRoutineTaskIfStatusTable

table
.1.3.6.1.4.1.3902.1083.5.2.3.4 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrRoutineTaskIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrRoutineTaskIfStatusTable' 
OTDR routine task interface status table
zxAnOtdrRoutineTaskIfStatusEntry row .1.3.6.1.4.1.3902.1083.5.2.3.4.1
OTDR routine task interface status entry.
Indexes
Column Syntax OID
zxAnOtdrRoutineTaskIfStatus
The result status of OTDR routine test.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
 .1.3.6.1.4.1.3902.1083.5.2.3.4.1.1
zxAnOtdrRoutineTaskIfFailReason
The OTDR routine test failed reason.
Enumeration
Enumerated Values:
1noError
255otherErrors
 .1.3.6.1.4.1.3902.1083.5.2.3.4.1.2

zxAnOtdrFtpServerTable

table
.1.3.6.1.4.1.3902.1083.5.2.4.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFtpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFtpServerTable' 
FTP server configuration table.
zxAnOtdrFtpServerEntry row .1.3.6.1.4.1.3902.1083.5.2.4.2.1
FTP server configuration entry.
Indexes
Column Syntax OID
zxAnOtdrFtpServerId
FTP server ID.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.1
zxAnOtdrFtpServerIpAddressType
IP address type of the FTP server.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.2
zxAnOtdrFtpServerIpAddress
IP address of the FTP server.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.3
zxAnOtdrFtpServerProtocolType
Protocol type of the FTP server.
ftp(1): File Transfer Protocol
sftp(2): Ssh File Transfer Protocol
Enumerationr/w
Enumerated Values:
1ftp
2sftp
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.4
zxAnOtdrFtpServerUserName
User name of the FTP server.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.5
zxAnOtdrFtpServerUserPwd
User password of the FTP server.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.6
zxAnOtdrFtpServerPath
File path which starts from the root directory.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.7
zxAnOtdrFtpServerRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.4.2.1.50

zxAnOtdrAlgorithmTable

table
.1.3.6.1.4.1.3902.1083.5.2.5.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrAlgorithmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrAlgorithmTable' 
OTDR algorithm table.
zxAnOtdrAlgorithmEntry row .1.3.6.1.4.1.3902.1083.5.2.5.2.1
OTDR algorithm entry.
Indexes
Column Syntax OID
zxAnOtdrAlgorithmRack
The rack No. of device to be used with OTDR.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.5.2.1.1
zxAnOtdrAlgorithmShelf
The shelf No. of device to be used with OTDR.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.5.2.1.2
zxAnOtdrAlgorithmSlot
The slot No. of device to be used with OTDR.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.5.2.1.3
zxAnOtdrAlgorithmVersion
The OTDR algorithm version of current card.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.5.2.1.4

zxAnOtdrTestCapPwDistanceTable

table
.1.3.6.1.4.1.3902.1083.5.2.6.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrTestCapPwDistanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrTestCapPwDistanceTable' 
OTDR test capacity pulse width distance table.
zxAnOtdrTestCapPwDistanceEntry row .1.3.6.1.4.1.3902.1083.5.2.6.1.2.1
OTDR test capacity pulse width distance entry.
Indexes
Column Syntax OID
zxAnOtdrTestCapPwDistancePw
The pulse width supported by OTDR.
A value less than 200000 is mapped to an integer pulse width
value.
A value greater than 200000 is mapped to a specific pulse width
value.
e.g., 5 is mapped to 5ns, 200001 is mapped to…
Integer32
Constraints:
range: 5-300000
 .1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.1
zxAnOtdrTestCapPwMaxDistance
The maximum of the test capacity distance supported by the current
pulse width.
MetersInteger32
Constraints:
range: 500-300000
 .1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.2
zxAnOtdrTestCapPwMinDistance
The minimum of the test capacity distance supported by the current
pulse width.
MetersInteger32
Constraints:
range: 500-300000
 .1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.3

zxAnOtdrTestCapCwDistanceTable

table
.1.3.6.1.4.1.3902.1083.5.2.6.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrTestCapCwDistanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrTestCapCwDistanceTable' 
OTDR test capacity code width distance table.
zxAnOtdrTestCapCwDistanceEntry row .1.3.6.1.4.1.3902.1083.5.2.6.1.3.1
OTDR test capacity code width distance entry.
Indexes
Column Syntax OID
zxAnOtdrTestCapCwDistanceCw
The code width supported by OTDR.
NanosecondsInteger32
Constraints:
range: 5-1275
 .1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.1
zxAnOtdrTestCapCwMaxDistance
The maximum of the test capacity distance supported by
the current code width.
MetersInteger32
Constraints:
range: 500-300000
 .1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.2
zxAnOtdrTestCapCwMinDistance
The minimum of the test capacity distance supported by
the current code width.
MetersInteger32
Constraints:
range: 500-300000
 .1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.3

zxAnOtdrTestTaskStatusTable

table
.1.3.6.1.4.1.3902.1083.5.2.7.1 · 1 row entry · 9 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrTestTaskStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrTestTaskStatusTable' 
OTDR test task status table.
zxAnOtdrTestTaskStatusEntry row .1.3.6.1.4.1.3902.1083.5.2.7.1.1
OTDR test task status entry.
Indexes
Column Syntax OID
zxAnOtdrTestTaskId
OTDR test task ID. The task name is zxAnOtdrRoutineTaskName
when the zxAnOtdrTestTaskType is routine,
other tests relate to zxAnOtdrFastTestSn.
SNMPv2-TCDisplayString
Constraints:
range: 1-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.1
zxAnOtdrTestTaskStatus
The OTDR test task status.
Enumeration
Enumerated Values:
1notStarted
2waiting
3inProgress
4suspended
5success
6failed
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.2
zxAnOtdrTestTaskUnexecutedReason
The OTDR test task unexecuted reason.
Enumeration
Enumerated Values:
1none
2preempted
3waitingPortTestFinished
4queuing
255others
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.3
zxAnOtdrTestTaskPriority
The OTDR test task priority.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.4
zxAnOtdrTestTaskWaitingTime
The OTDR test task waiting time. When the task is
in progress, the waiting time is 0.
MinutesInteger32
Constraints:
range: 0-1440
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.5
zxAnOtdrTestTaskRequestSource
The OTDR test task request source.
Enumeration
Enumerated Values:
1ems
2tl1
3app
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.6
zxAnOtdrTestTaskType
The task type.
fast(1): - Fast test.
health(2): - Health database test.
adHoc(3): - Ad hoc test.
reflector(4): - Reflector test.
alarmTrigg…
Enumeration
Enumerated Values:
1fast
2health
3adHoc
4reflector
5alarmTrigger
6adaptive
7acceptance
8labefaction
9lineDetectionHealth
10lineDetectionFast
11bothway
50periodicalRoutineTest
51sequentialRoutineTest
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.7
zxAnOtdrTestTaskStartTime
The test task starting time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.8
zxAnOtdrTestTaskRemainTimeout
The OTDR test task remaining timeout.
A negative indicates the task should never be timeout.
A zero indicates the task has been timeout.
MinutesInteger32
Constraints:
range: -1-1440
 .1.3.6.1.4.1.3902.1083.5.2.7.1.1.9

zxAnOtdrFastTestTaskConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.7.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFastTestTaskConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFastTestTaskConfTable' 
OTDR fast test task configuration table.
zxAnOtdrFastTestTaskConfEntry row .1.3.6.1.4.1.3902.1083.5.2.7.2.1
OTDR fast test task configuration entry.
Indexes
Column Syntax OID
zxAnOtdrFastTaskConfWaitTimeout
Fast test waiting timeout.
The test will be cancelled when timeout.
MinutesInteger32r/w
Constraints:
range: 0-1440
 .1.3.6.1.4.1.3902.1083.5.2.7.2.1.1
zxAnOtdrFastTaskConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.7.2.1.50

zxAnOtdrMonNodeConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.8.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrMonNodeConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrMonNodeConfTable' 
OTDR monitoring node configuration table.
zxAnOtdrMonNodeConfEntry row .1.3.6.1.4.1.3902.1083.5.2.8.2.1
OTDR monitoring node configuration entry.
Indexes
Column Syntax OID
zxAnOtdrMonNodeSn
OTDR monitoring node serial number.
SNMPv2-TCDisplayString
Constraints:
range: 1-128
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.8.2.1.1
zxAnOtdrMonNodePosition
OTDR monitoring node position.
Value 0 means the monitoring node open/close test is
not executed or the test is failed.
MetersInteger32
Constraints:
range: 0-200000
 .1.3.6.1.4.1.3902.1083.5.2.8.2.1.2
zxAnOtdrMonNodeStatus
OTDR monitoring node status.
A zxAnOtdrMonNodeOpenedAlm trap will be sent when
the zxAnOtdrMonNodeStatus is opened.
A zxAnOtdrMonNodeOpenedClr trap will be sent when
the zxAnOtdrMonNodeStatus is closed.
Enumeration
Enumerated Values:
1opened
2closed
255unknown
 .1.3.6.1.4.1.3902.1083.5.2.8.2.1.3
zxAnOtdrNodeConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.8.2.1.50

zxAnOtdrMonPortStatusTable

table
.1.3.6.1.4.1.3902.1083.5.2.8.3 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrMonPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrMonPortStatusTable' 
OTDR monitoring port status table.
zxAnOtdrMonPortStatusEntry row .1.3.6.1.4.1.3902.1083.5.2.8.3.1
OTDR monitoring port status entry.
Indexes
Column Syntax OID
zxAnOtdrMonPortLinkStatus
OTDR monitoring port link status.
A zxAnOtdrMonPortLinkAbnormalAlm trap will be sent when
the zxAnOtdrMonPortLinkStatus is abnormal.
A zxAnOtdrMonPortLinkAbnormalClr trap will be sent when
the zxAnOtdrMonPortLinkStatus …
Enumeration
Enumerated Values:
1normal
2abnormal
255unknown
 .1.3.6.1.4.1.3902.1083.5.2.8.3.1.1

zxAnOtdrMonReflectLabelTable

table
.1.3.6.1.4.1.3902.1083.5.2.8.4 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrMonReflectLabelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrMonReflectLabelTable' 
OTDR reflector labelling table.
zxAnOtdrMonReflectLabelEntry row .1.3.6.1.4.1.3902.1083.5.2.8.4.1
OTDR reflector labelling entry.
Indexes
Column Syntax OID
zxAnOtdrMonReflectLabelAction
OTDR reflector labelling action.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.3902.1083.5.2.8.4.1.1
zxAnOtdrMonReflectLabelStatus
OTDR reflector labelling status.
Enumeration
Enumerated Values:
1notStarted
2inProgress
3success
4failed
5stopped
6waiting
 .1.3.6.1.4.1.3902.1083.5.2.8.4.1.2
zxAnOtdrMonReflectLabelLastTime
OTDR reflector last labelling time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1083.5.2.8.4.1.3

zxAnOtdrOptModuleIfTable

table
.1.3.6.1.4.1.3902.1083.5.2.9.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrOptModuleIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrOptModuleIfTable' 
OTDR optical module interface table.
zxAnOtdrOptModuleIfEntry row .1.3.6.1.4.1.3902.1083.5.2.9.2.1
OTDR optical module interface entry.
Indexes
Column Syntax OID
zxAnOtdrOptModuleIfBasicPwr
OTDR interface basic optical power.
'65535' means the basic optical power is invalid.
0.01dBInteger32
Constraints:
range: -10000-10000
range: 65535-65535
 .1.3.6.1.4.1.3902.1083.5.2.9.2.1.1
zxAnOtdrOptModuleIfCurrentPwr
OTDR interface current optical power.
'65535' means the current optical power is invalid.
0.01dBInteger32
Constraints:
range: -10000-10000
range: 65535-65535
 .1.3.6.1.4.1.3902.1083.5.2.9.2.1.2
zxAnOtdrOptModuleIfPwrVaryThresh
OTDR interface optical power variaton threshold.
A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference
value of zxAnOtdrOptModuleIfBasicPwr and
zxAnOtdrOptModuleIfCurrentPwr is higher than this threshold.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.9.2.1.3
zxAnOtdrOptModuleIfPwrAdjust
To adjust the OTDR basic optical power.
Enumerationr/w
Enumerated Values:
1start
 .1.3.6.1.4.1.3902.1083.5.2.9.2.1.4

zxAnOtdrP2mpFaultLocatePrfTable

table
.1.3.6.1.4.1.3902.1083.5.2.10.2 · 1 row entry · 14 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrP2mpFaultLocatePrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrP2mpFaultLocatePrfTable' 
OTDR P2MP fault locating threshold profile table.
zxAnOtdrP2mpFaultLocatePrfEntry row .1.3.6.1.4.1.3902.1083.5.2.10.2.1
OTDR P2MP fault locating threshold profile entry.
Indexes
Column Syntax OID
zxAnOtdrP2mpFaultLocatePrfName
OTDR P2MP fault locating threshold profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.1
zxAnOtdrP2mpPositionDiff
OTDR P2MP position difference threshold.
MetersInteger32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.2
zxAnOtdrP2mpTrunkBrokenLossDiff
OTDR P2MP trunk broken insertion loss difference threshold.
This threshold is used to locate trunk broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.3
zxAnOtdrP2mpTrunkBrokenLoss
OTDR P2MP trunk broken insertion loss threshold.
This threshold is used to locate trunk broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.4
zxAnOtdrP2mpTrunkAttenLossDiff
OTDR P2MP trunk attenuation insertion loss difference threshold.
This threshold is used to locate trunk attenuation fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.5
zxAnOtdrP2mpTrunkAttenLoss
OTDR P2MP trunk attenuation insertion loss threshold.
This threshold is used to locate trunk attenuation fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.6
zxAnOtdrP2mpTrunkAbnPeakDiff
OTDR P2MP trunk abnormal reflective peak difference threshold.
This threshold is used to locate trunk abnormal fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.7
zxAnOtdrP2mpTrunkAbnRtnLoss
OTDR P2MP trunk abnormal return loss threshold.
This threshold is used to locate trunk abnormal fault.
0.01Integer32r/w
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.8
zxAnOtdrP2mpTrunkAbnLoss
OTDR P2MP trunk abnormal insertion loss threshold.
This threshold is used to locate trunk abnormal fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.9
zxAnOtdrP2mpBranchBrokenRtnLoss
OTDR P2MP branch broken return loss threshold.
This threshold is used to locate branch broken fault.
0.01Integer32r/w
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.10
zxAnOtdrP2mpBranchBrokenLoss
OTDR P2MP branch broken insertion loss threshold.
This threshold is used to locate branch broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.11
zxAnOtdrP2mpBranchBrokenPeakDiff
OTDR P2MP branch broken reflective peak difference threshold.
This threshold is used to locate branch broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.12
zxAnOtdrP2mpBranchAbnPeakDiff
OTDR P2MP branch abnormal reflective peak difference threshold.
This threshold is used to locate branch abnormal fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.13
zxAnOtdrP2mpFaultLocPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.10.2.1.50

zxAnOtdrP2pFaultLocatePrfTable

table
.1.3.6.1.4.1.3902.1083.5.2.10.3 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrP2pFaultLocatePrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrP2pFaultLocatePrfTable' 
OTDR P2P fault locating threshold profile table.
zxAnOtdrP2pFaultLocatePrfEntry row .1.3.6.1.4.1.3902.1083.5.2.10.3.1
OTDR P2P fault locating threshold profile entry.
Indexes
Column Syntax OID
zxAnOtdrP2pFaultLocatePrfName
OTDR P2P fault locating threshold profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.1
zxAnOtdrP2pPositionDiff
OTDR P2P position difference threshold.
MetersInteger32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.2
zxAnOtdrP2pBrokenLossDiff
OTDR P2P link broken insertion loss difference threshold.
This threshold is used to locate link broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.3
zxAnOtdrP2pBrokenLoss
OTDR P2P link broken insertion loss threshold.
This threshold is used to locate link broken fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.4
zxAnOtdrP2pAttenuationLossDiff
OTDR P2P link attenuation insertion loss difference threshold.
This threshold is used to locate link attenuation fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.5
zxAnOtdrP2pAttenuationLoss
OTDR P2P link attenuation insertion loss threshold.
This threshold is used to locate link attenuation fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.6
zxAnOtdrP2pAbnormalPeakDiff
OTDR P2P link abnormal reflective peak difference threshold.
This threshold is used to locate link abnormal fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.7
zxAnOtdrP2pAbnormalReturnLoss
OTDR P2P link abnormal return loss threshold.
This threshold is used to locate link abnormal fault.
0.01Integer32r/w
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.8
zxAnOtdrP2pAbnormalLoss
OTDR P2P link abnormal insertion loss threshold.
This threshold is used to locate link abnormal fault.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.9
zxAnOtdrP2pFaultLocPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.10.3.1.50

zxAnOtdrFaultLocateIfConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.10.4 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrFaultLocateIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrFaultLocateIfConfTable' 
OTDR interface fault locating threshold profile table.
zxAnOtdrFaultLocateIfConfEntry row .1.3.6.1.4.1.3902.1083.5.2.10.4.1
OTDR interface fault locating threshold profile entry.
Indexes
Column Syntax OID
zxAnOtdrFaultLocateIfP2mpPrf
OTDR fault locating P2MP threshold profile name.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.10.4.1.1
zxAnOtdrFaultLocateIfP2pPrf
OTDR fault locating P2P threshold profile name.
Empty string means unconfigured.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.10.4.1.2
zxAnOtdrFaultLocateIfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must set this object to
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1083.5.2.10.4.1.50

zxAnOtdrIfEventBatchConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.11.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrIfEventBatchConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrIfEventBatchConfTable' 
OTDR interface event batch configuration table.
zxAnOtdrIfEventBatchConfEntry row .1.3.6.1.4.1.3902.1083.5.2.11.2.1
OTDR interface event batch configuration entry.
Indexes
Column Syntax OID
zxAnOtdrIfEventBatchConfDevTypes
OTDR interface event device type list. The format of the value is
as follows: '1:3-6,10;2:2,8'.
It means that the device type value of the event ID including
3,4,5,6,10 is 1 and the device type value of the event ID
inc…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.11.2.1.1

zxAnOtdrIfEventConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.11.3 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrIfEventConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrIfEventConfTable' 
OTDR interface event configuration table.
zxAnOtdrIfEventConfEntry row .1.3.6.1.4.1.3902.1083.5.2.11.3.1
OTDR interface event configuration entry.
Indexes
Column Syntax OID
zxAnOtdrIfEventConfEventId
OTDR interface event ID.
Integer32
Constraints:
range: 1-500
 .1.3.6.1.4.1.3902.1083.5.2.11.3.1.1
zxAnOtdrIfEventConfDevType
OTDR interface event device type.
Value 0 means the event device type is empty.
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1083.5.2.11.3.1.2
zxAnOtdrIfEventConfDevDesc
OTDR interface event device description.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.11.3.1.3

zxAnOtdrAdaptTestLinkIfConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.12.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrAdaptTestLinkIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrAdaptTestLinkIfConfTable' 
OTDR adaptive test link threshold interface configuration table.
zxAnOtdrAdaptTestLinkIfConfEntry row .1.3.6.1.4.1.3902.1083.5.2.12.2.2.1
OTDR adaptive test link threshold interface configuration entry.
Indexes
Column Syntax OID
zxAnOtdrATLinkIfParamType
The link parameters type of the OTDR adaptive test.
Enumerationr/w
Enumerated Values:
1global
2userDefined
 .1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.1
zxAnOtdrATLinkIfLossThresh
The link loss threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATLinkIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 1-100000
 .1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.2
zxAnOtdrATLinkIfRtnLossThresh
The link return loss threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATLinkIfParamType is userDefined(2).
0.1dBInteger32r/w
Constraints:
range: 150-700
 .1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.3

zxAnOtdrAdaptTestDevIfConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.12.3.2 · 1 row entry · 16 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrAdaptTestDevIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrAdaptTestDevIfConfTable' 
OTDR adaptive test device threshold interface configuration table.
zxAnOtdrAdaptTestDevIfConfEntry row .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1
OTDR adaptive test device threshold interface configuration evntry.
Indexes
Column Syntax OID
zxAnOtdrATDevIfParamType
The device parameters type of the OTDR adaptive test.
Enumerationr/w
Enumerated Values:
1global
2userDefined
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.1
zxAnOtdrATDevIfFiberAttenThresh
The device fiber attenuation threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.001dB/kmInteger32r/w
Constraints:
range: 100-5000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.2
zxAnOtdrATDevIfLossThresh
The device loss threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: -5000-5000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.3
zxAnOtdrATDevIfReflThresh
The device reflectivity threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.1dBInteger32r/w
Constraints:
range: -800--1
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.4
zxAnOtdrATDevIfConnLossThresh
The device connector loss threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: -5000-5000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.5
zxAnOtdrATDevIfConnReflThresh
The device connector reflectivity threshold of the OTDR adaptive
test. This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.1dBInteger32r/w
Constraints:
range: -800--1
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.6
zxAnOtdrATDevIfSpliceLossThresh
The device splice loss threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: -5000-5000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.7
zxAnOtdrATDevIfSpReflThresh
The device splitter reflectivity threshold of the OTDR adaptive
test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.1dBInteger32r/w
Constraints:
range: -800--1
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.8
zxAnOtdrATDevIfSp2LossThresh
The device splitter (the splitting ratio is 1:2 or 2:2) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is
userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 2500-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.9
zxAnOtdrATDevIfSp4LossThresh
The device splitter (the splitting ratio is 1:4 or 2:4) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 6000-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.10
zxAnOtdrATDevIfSp8LossThresh
The device splitter (the splitting ratio is 1:8 or 2:8) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 9000-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.11
zxAnOtdrATDevIfSp16LossThresh
The device splitter (the splitting ratio is 1:16 or 2:16) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 12500-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.12
zxAnOtdrATDevIfSp32LossThresh
The device splitter (the splitting ratio is 1:32 or 2:32) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 15500-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.13
zxAnOtdrATDevIfSp64LossThresh
The device splitter (the splitting ratio is 1:64 or 2:64) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 19000-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.14
zxAnOtdrATDevIfSp128LossThresh
The device splitter (the splitting ratio is 1:128 or 2:128) loss
threshold of the OTDR adaptive test. This threshold is applied to
the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
0.001dBInteger32r/w
Constraints:
range: 22500-26000
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.15
zxAnOtdrATDevIfOnuReflThresh
The device ONU reflectivity threshold of the OTDR adaptive test.
This threshold is applied to the interface when the
zxAnOtdrATDevIfParamType is userDefined(2).
0.1dBInteger32r/w
Constraints:
range: -800--1
 .1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.16

zxAnOtdrDetectionLineConfTable

table
.1.3.6.1.4.1.3902.1083.5.2.13.2 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnOtdrDetectionLineConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-OTDR-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-OTDR-MIB::zxAnOtdrDetectionLineConfTable' 
OTDR detection line configuration table.
zxAnOtdrDetectionLineConfEntry row .1.3.6.1.4.1.3902.1083.5.2.13.2.1
OTDR detection line configuration entry.
Indexes
Column Syntax OID
zxAnOtdrDetectLineId
OTDR detection line ID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.1
zxAnOtdrDetectLineLength
OTDR detection line length.
0.1MetersInteger32
Constraints:
range: 0-3000000
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.2
zxAnOtdrDetectLineAlias
OTDR detection line alias.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.3
zxAnOtdrDetectLinePositionDiff
OTDR detection line position difference threshold.
MetersInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.4
zxAnOtdrDetectLineAbnPeakDiff
OTDR detection line abnormal reflective peak
difference threshold.
0.01dBInteger32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.5
zxAnOtdrDetectLineStatus
OTDR detection line status.
A zxAnOtdrDetectionLineAbnAlm trap will be sent when
the zxAnOtdrDetectionLineStatus is peakAbnormal or fiberBroken.
A zxAnOtdrDetectionLineAbnClr trap will be sent when
the zxAnOtdrDetection…
Enumeration
Enumerated Values:
1normal
2peakAbnormal
3fiberBroken
255unknown
 .1.3.6.1.4.1.3902.1083.5.2.13.2.1.6