ZTE-AN-GPON-SERVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
41
Rows
41
Columns
769

zxAnGponSrvBandwidthPrfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.2 · 1 row entry · 8 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvBandwidthPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvBandwidthPrfTable' 
Bandwidth allocation for one T-CONT in some ONU.
these bandwidths as following:
fixed bandwidth        ab. FBW
assured bandwidth      ab. ABW
non-assured bandwidth  ab. NABW
best effort bandwidth  ab. BEBW
additional bandwidth   ab. AddBW
guaranteed bandwidth   ab. GBW
maximum bandwidth      ab. MaxBW
minimum bandwidth      ab. MinBW
AddBW = NABW + BEBW
GBW   = FBW  + ABW
MaxBW = GBW  + AddBW
MinBW = FBW
NABW, BEBW, FBW and ABWare able to participate in DBA
zxAnGponSrvBandwidthPrfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1
An entry in the Bandwidth profile table.
Indexes
Column Syntax OID
zxAnGponSrvBwPrfName
The bandwidth profile name. It may be created/read/modified.
Writing or modifying can be done all the time.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.1
zxAnGponSrvBwPrfFixed
The Fixed Bandwidth is entirely reserved and cyclically allocated
in order to achieve a low traffic transfer delay.
The unit is kbps.
It may be created/read/modified. Modifying can be
done only when the entry is not use…
kbpsInteger32r/w
Constraints:
range: 64-9953280
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.2
zxAnGponSrvBwPrfAssured
The Assured Bandwidth is bandwidth that is always available to
the ONU/ONT if the T-CONT buffer is expected to have traffic to
transmit.
If the T-CONT buffer does not have traffic to transmit,
this bandwidth may be u…
kbpsInteger32r/w
Constraints:
range: 64-9953280
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.3
zxAnGponSrvBwPrfMaximum
The Maximum Bandwidth.The unit is kbps.
It may be created/read/modified.
Writing or modifying can be done when the entry
is not used by any other entry.
kbpsInteger32r/w
Constraints:
range: 64-9953280
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.4
zxAnGponSrvBwPrfType
There are 5 kinds of bandwidth profile mode:
Type 1 is characterized by Fixed bandwidth only;
Type 2 is characterized by Assured bandwidth only;
Type 3 has Assured bandwidth and Non-assured bandwidth;
…
Enumerationr/w
Enumerated Values:
1type1
2type2
3type3
4type4
5type5
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.5
zxAnGponSrvBwPrfPriority
The priority is used for T-CONT bandwidth allocation.
It is valid when zxAnGponSrvBwPrfType is type4(4) or type5(5).
The value 1 indicates the highest priority and the value 0
indicates disabling this function.
Integer32r/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.6
zxAnGponSrvBwPrfWeight
The weight is used for T-CONT bandwidth allocation.
It is valid when zxAnGponSrvBwPrfType is type4(4) or type5(5).
First, bandwidth is allocated according to
zxAnGponSrvBwPrfPriority. If some T-CONTs have the same prio…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.7
zxAnGponSrvBwPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
To create a row in this table, a manager must
set this object to createAndGo(4).

In particular,…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.2.1.50

zxAnGponSrvTrafficPrfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvTrafficPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvTrafficPrfTable' 
Rate configuration for one traffic as fowllowing:
sustainable information rate      ab. SIR
peak information rate             ab. PIR
zxAnGponSrvTrafficPrfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1
An entry in the traffic profile table.
Indexes
Column Syntax OID
zxAnGponSrvTrafficPrfName
The traffic profile name. It may be created/read/modified.
Modifying can be done all the time.
SNMPv2-TCDisplayString
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.1
zxAnGponSrvTrafficPrfSir
The SIR is sustainable rate of the traffic, modifying
can be done when the entry is not used by any other entry.
kbpsInteger32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.2
zxAnGponSrvTrafficPrfPir
The PIR is peak rate of the traffic, modifying
can be done when the entry is not used by any other entry.
kbpsInteger32r/w
Constraints:
range: 64-10000000
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.3
zxAnGponSvrTrafficPrfCbs
This attribute specifies committed block size.
The value 0 accepts the system default policy.
kbytesInteger32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.4
zxAnGponSvrTrafficPrfPbs
This attribute specifies peak block size.
The value 0 accepts the system default policy.
kbytesInteger32r/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.5
zxAnGponSrvTrafficPrfRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).

In particul…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.3.1.50

zxAnGponOltPerfAlmPrfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOltPerfAlmPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOltPerfAlmPrfTable' 
The performance alarm threshold profile 
list table of interfaces.
zxAnGponOltPerfAlmPrfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.2.1
The performance alarm threshold profile
applying entry of interfaces.
Indexes
Column Syntax OID
zxAnGponOltPerfAlmPrfName
The performance alarm threshold profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.2.1.1
zxAnGponOltPerfAlmPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in th…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.2.1.50

zxAnGponOltPerfAlmPrfItemTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.3 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOltPerfAlmPrfItemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOltPerfAlmPrfItemTable' 
The performance alarm threshold profile table of interfaces.
zxAnGponOltPerfAlmPrfItemEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1
An entry in zxAnGponOltPerfAlmPrfItemTable.
When a manager wants to create or modify an OLT performance
alarm threshold item,it must comply with the multi-variables
usage rule that all the mib variables related to sam…
Indexes
Column Syntax OID
zxAnGponOltPerfVariable
The object identifier of performance variables.
ObjectIdentifier .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.1
zxAnGponOltPerfRiseAlmThresh
The threshold for rising alarm.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.2
zxAnGponOltPerfRiseAlmClrThresh
The threshold for rising alarm restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.3
zxAnGponOltPerfRiseWarnThresh
The threshold for rising warning.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.4
zxAnGponOltPerfRiseWarnClrThresh
The threshold for rising warning restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.5
zxAnGponOltPerfFallWarnThresh
The threshold for falling warning.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.6
zxAnGponOltPerfFallWarnClrThresh
The threshold for falling warning restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.7
zxAnGponOltPerfFallAlmThresh
The threshold for falling alarm.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.8
zxAnGponOltPerfFallAlmClrThresh
The threshold for falling alarm restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.9
zxAnGponOltPerfThreshUsed
The threshold used flag for falling alarm restore.
Bitsr/w
Enumerated Values:
0riseAlmThresh
1riseAlmClrThresh
2riseWarnThresh
3riseWarnClrThresh
4fallWarnThresh
5fallWarnClrThresh
6fallAlmThresh
7fallAlmClrThresh
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.10
zxAnGponOltPerfAlmItemRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.3.1.50

zxAnGponOltPerfAlmPrfApplyTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOltPerfAlmPrfApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOltPerfAlmPrfApplyTable' 
The performance alarm threshold profile applying table of 
interfaces.
The 'IfType' of ifIndex supports 1(physical interface)
and 5(PON channel).
zxAnGponOltPerfAlmPrfApplyEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.4.1
An entry in zxAnGponOltPerfAlmPrfApplyTable.
When a manager wants to apply an OLT performance alarm
profile to specificed OLT interface,it must comply with
the multi-variables usage rule that all the mib variables
re…
Indexes
Column Syntax OID
zxAnGponOltPerfAlmPrf
The performance alarm threshold profile.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.4.1.1
zxAnGponOltAlmPrfApplyRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.4.1.50

zxAnGponOnuPerfAlmPrfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.5 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOnuPerfAlmPrfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOnuPerfAlmPrfTable' 
The performance alarm threshold profile 
list table of interfaces.
zxAnGponOnuPerfAlmPrfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.5.1
The performance alarm threshold profile
applying entry of interfaces.
Indexes
Column Syntax OID
zxAnGponOnuPerfAlmPrfName
The performance alarm threshold profile name.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.5.1.1
zxAnGponOnuPerfAlmPrfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.5.1.50

zxAnGponOnuPerfAlmPrfItemTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.6 · 1 row entry · 11 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOnuPerfAlmPrfItemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOnuPerfAlmPrfItemTable' 
The performance alarm threshold profile table of interfaces.
zxAnGponOnuPerfAlmPrfItemEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1
An entry in zxAnGponOnuPerfAlmPrfItemTable.
When a manager wants to create or modify an ONU performance
alarm threshold item,it must comply with the multi-variables
usage rule that all the mib variables related to sam…
Indexes
Column Syntax OID
zxAnGponOnuPerfVariable
The object identifier of performance variables.
ObjectIdentifier .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.1
zxAnGponOnuPerfRiseAlmThresh
The threshold for rising alarm.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.2
zxAnGponOnuPerfRiseAlmClrThresh
The threshold for rising alarm restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.3
zxAnGponOnuPerfRiseWarnThresh
The threshold for rising warning.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.4
zxAnGponOnuPerfRiseWarnClrThresh
The threshold for rising warning restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.5
zxAnGponOnuPerfFallWarnThresh
The threshold for falling warning.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.6
zxAnGponOnuPerfFallWarnClrThresh
The threshold for falling warning restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.7
zxAnGponOnuPerfFallAlmThresh
The threshold for falling alarm.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.8
zxAnGponOnuPerfFallAlmClrThresh
The threshold for falling alarm restore.
HC-PerfHist-TC-MIBHCPerfCurrentCountr/w .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.9
zxAnGponOnuPerfThreshUsed
The threshold used flag for falling alarm restore.
Bitsr/w
Enumerated Values:
0riseAlmThresh
1riseAlmClrThresh
2riseWarnThresh
3riseWarnClrThresh
4fallWarnThresh
5fallWarnClrThresh
6fallAlmThresh
7fallAlmClrThresh
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.10
zxAnGponOnuPerfAlmItemRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.6.1.50

zxAnGponOnuPerfAlmPrfApplyTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.1.4.7 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOnuPerfAlmPrfApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOnuPerfAlmPrfApplyTable' 
The performance alarm threshold profile 
applying table of interfaces.
zxAnGponOnuPerfAlmPrfApplyEntry row .1.3.6.1.4.1.3902.1082.500.10.2.1.4.7.1
An entry in zxAnGponOnuPerfAlmPrfApplyTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
When a manager wants to apply an ONU performance alarm
profile to specificed ONU interface,it must comply with
…
Indexes
Column Syntax OID
zxAnGponOnuPerfAlmPrf
The performance alarm threshold profile.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.7.1.1
zxAnGponOnuAlmPrfApplyRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.1.4.7.1.50

zxAnGponSrvOltCurrPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.2 · 1 row entry · 35 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltCurrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltCurrPerfTable' 
The current performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltCurrPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1
An entry in the OLT current performance data table.
Indexes
Column Syntax OID
zxAnGponUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.1
zxAnGponUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.2
zxAnGponUsErrGems
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.3
zxAnGponUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.4
zxAnGponUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.5
zxAnGponUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.6
zxAnGponUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.7
zxAnGponUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.8
zxAnGponUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.9
zxAnGponUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.10
zxAnGponUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.11
zxAnGponDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.12
zxAnGponDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.13
zxAnGponOltReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diffe…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.14
zxAnGponCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.15
zxAnGponCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.16
zxAnGponUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.17
zxAnGponTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.18
zxAnGponUsBer
Upstream Bit Error Rate, in 10^-9 granularity.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.19
zxAnGponUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.20
zxAnGponBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.21
zxAnGponDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.22
zxAnGponDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.23
zxAnGponSnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.24
zxAnGponDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM messages
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.25
zxAnGponBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.26
zxAnGponAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.27
zxAnGponRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.28
zxAnGponDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.29
zxAnGponDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.30
zxAnGponKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.31
zxAnGponSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.32
zxAnGponSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.33
zxAnGponOltPerfCapability
The attribute indicates that the supports of GPON OLT performance,
each bit from left to right represents the support of performance
statistic from top to bottom in this MIB table, value 1 represents
support and value…
Bits
Enumerated Values:
0zxAnGponUsCorrectNIdleGems
1zxAnGponUsCorrectIdleGems
2zxAnGponUsErrGems
3zxAnGponUsGemPayloadBytes
4zxAnGponUsCorrectEtherFrm
5zxAnGponUsErrEtherFrm
6zxAnGponUsPloamMsgs
7zxAnGponUsErrPloamMsgs
8zxAnGponUsErrBits
9zxAnGponUsTotalBits
10zxAnGponUsCrcErrPkts
11zxAnGponDsEtherFrm
12zxAnGponDsPloamMsgs
13zxAnGponOltReis
14zxAnGponCorrectedBytes
15zxAnGponCorrectedWords
16zxAnGponUncorrectedWords
17zxAnGponTotalRxWords
18zxAnGponUsBer
19zxAnGponUsBip32Words
20zxAnGponBip32Errors
21zxAnGponDsXgemFrames
22zxAnGponDsNIdleXgemBytes
23zxAnGponSnGrants
24zxAnGponDsOnuRxPloamMsgs
25zxAnGponBurstProfileMsgs
26zxAnGponAssignOnuIdMsgs
27zxAnGponRangingTimeMsgs
28zxAnGponDeactivateOnuIdMsgs
29zxAnGponDisableSnMsgs
30zxAnGponKeyControlMsgs
31zxAnGponSleepAllowMsgs
32zxAnGponSnOnuMsgs
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.99
zxAnGponOltCurrReset
Clear all the current performance counters.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.2.1.100

zxAnGponSrvOltCurr15MinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.4 · 1 row entry · 34 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltCurr15MinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltCurr15MinPerfTable' 
The current 15 minutes performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltCurr15MinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1
An entry in the OLT current 15 minutes performance data table.
Indexes
Column Syntax OID
zxAnGponOltC15MTimeElapsed
Number of seconds that have elapsed since the beginning
of the current 15 minutes interval.
SecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.1
zxAnGponC15MUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.2
zxAnGponC15MUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.3
zxAnGponC15MUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.4
zxAnGponC15MUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.5
zxAnGponC15MUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.6
zxAnGponC15MUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.7
zxAnGponC15MUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.8
zxAnGponC15MUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.9
zxAnGponC15MUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.10
zxAnGponC15MUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.11
zxAnGponC15MUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.12
zxAnGponC15MDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.13
zxAnGponC15MDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.14
zxAnGponC15MReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.15
zxAnGponC15MCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.16
zxAnGponC15MCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.17
zxAnGponC15MUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.18
zxAnGponC15MTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.19
zxAnGponC15MUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.20
zxAnGponC15MBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.21
zxAnGponC15MDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.22
zxAnGponC15MDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.23
zxAnGponC15MSnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.24
zxAnGponC15MDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.25
zxAnGponC15MBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.26
zxAnGponC15MAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.27
zxAnGponC15MRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.28
zxAnGponC15MDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.29
zxAnGponC15MDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.30
zxAnGponC15MKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.31
zxAnGponC15MSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.32
zxAnGponC15MSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.33
zxAnGponOltC15MReset
Clear all the current 15-minutes performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.4.1.100

zxAnGponSrvOltCurr1DayPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.5 · 1 row entry · 34 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltCurr1DayPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltCurr1DayPerfTable' 
The current 1 day performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltCurr1DayPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1
An entry in the OLT current 1 day performance data table.
Indexes
Column Syntax OID
zxAnGponOltC1DTimeElapsed
Number of seconds that have elapsed since
the beginning of the current 1 day interval.
SecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.1
zxAnGponC1DUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.2
zxAnGponC1DUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.3
zxAnGponC1DUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.4
zxAnGponC1DUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.5
zxAnGponC1DUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.6
zxAnGponC1DUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.7
zxAnGponC1DUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.8
zxAnGponC1DUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.9
zxAnGponC1DUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.10
zxAnGponC1DUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.11
zxAnGponC1DUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.12
zxAnGponC1DDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.13
zxAnGponC1DDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.14
zxAnGponC1DReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.15
zxAnGponC1DCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.16
zxAnGponC1DCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.17
zxAnGponC1DUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.18
zxAnGponC1DTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.19
zxAnGponC1DUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.20
zxAnGponC1DBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.21
zxAnGponC1DDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.22
zxAnGponC1DDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.23
zxAnGponC1SnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.24
zxAnGponC1DDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.25
zxAnGponC1DBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.26
zxAnGponC1DAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.27
zxAnGponC1DRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.28
zxAnGponC1DDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.29
zxAnGponC1DDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.30
zxAnGponC1DKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.31
zxAnGponC1DSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.32
zxAnGponC1DSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.33
zxAnGponOltC1DReset
Clear all the current 1 day performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.5.1.100

zxAnGponSrvOltHis15MinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.6 · 1 row entry · 35 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltHis15MinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltHis15MinPerfTable' 
The 15 minutes interval performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltHis15MinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1
An entry in the OLT 15 minutes interval performance data table.
Indexes
Column Syntax OID
zxAnGponOltH15MIntervalNo
Performance Data Interval.

Interval 1 is the the most recent previous interval;
Interval 96 is 24 hours ago.
Intervals from 2 to 96 are optional.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.1
zxAnGponOltH15MValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.2
zxAnGponOltH15MDateAndTime
15min performace data interval create time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.3
zxAnGponH15MUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.4
zxAnGponH15MUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.5
zxAnGponH15MUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.6
zxAnGponH15MUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.7
zxAnGponH15MUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.8
zxAnGponH15MUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.9
zxAnGponH15MUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.10
zxAnGponH15MUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.11
zxAnGponH15MUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.12
zxAnGponH15MUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.13
zxAnGponH15MUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.14
zxAnGponH15MDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.15
zxAnGponH15MDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.16
zxAnGponH15MReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.17
zxAnGponH15MCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.18
zxAnGponH15MCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.19
zxAnGponH15MUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.20
zxAnGponH15MTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.21
zxAnGponH15MUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.22
zxAnGponH15MBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.23
zxAnGponH15MDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.24
zxAnGponH15MDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.25
zxAnGponH15MSnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.26
zxAnGponH15MDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.27
zxAnGponH15MBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.28
zxAnGponH15MAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.29
zxAnGponH15MRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.30
zxAnGponH15MDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.31
zxAnGponH15MDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.32
zxAnGponH15MKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.33
zxAnGponH15MSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.34
zxAnGponH15MSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.6.1.35

zxAnGponSrvOltHis1DayPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.7 · 1 row entry · 35 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltHis1DayPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltHis1DayPerfTable' 
The 1 day interval performance data table of interfaces.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltHis1DayPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1
The 1 day interval performance data entry of interfaces.
Indexes
Column Syntax OID
zxAnGponOltH1DIntervalNo
Performance Data:
Interval 1 is the the most recent previous interval.
Interval 7 is 1 week ago.
Intervals from 2 to 7 are optional.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.1
zxAnGponOltH1DValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.2
zxAnGponOltH1DDateAndTime
1 day performace data interval create time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.3
zxAnGponH1DUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.4
zxAnGponH1DUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.5
zxAnGponH1DUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.6
zxAnGponH1DUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.7
zxAnGponH1DUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.8
zxAnGponH1DUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.9
zxAnGponH1DUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.10
zxAnGponH1DUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.11
zxAnGponH1DUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.12
zxAnGponH1DUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.13
zxAnGponH1DUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.14
zxAnGponH1DDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.15
zxAnGponH1DDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.16
zxAnGponH1DReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.17
zxAnGponH1DCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.18
zxAnGponH1DCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.19
zxAnGponH1DUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.20
zxAnGponH1DTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.21
zxAnGponH1DUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.22
zxAnGponH1DBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.23
zxAnGponH1DDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.24
zxAnGponH1DDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.25
zxAnGponH1SnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.26
zxAnGponH1DDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.27
zxAnGponH1DBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.28
zxAnGponH1DAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.29
zxAnGponH1DRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.30
zxAnGponH1DDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.31
zxAnGponH1DDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.32
zxAnGponH1DKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.33
zxAnGponH1DSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.34
zxAnGponH1DSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.7.1.35

zxAnGponSrvOltCurrMinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.8 · 1 row entry · 34 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltCurrMinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltCurrMinPerfTable' 
The minutes interval performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltCurrMinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1
An entry in the OLT minutes interval performance data table.
Indexes
Column Syntax OID
zxAnGponOltCMinTimeElapsed
Number of seconds that have elapsed since the beginning
of the current minutes interval.
SecondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.1
zxAnGponCMinUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.2
zxAnGponCMinUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.3
zxAnGponCMinUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.4
zxAnGponCMinUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.5
zxAnGponCMinUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.6
zxAnGponCMinUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.7
zxAnGponCMinUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.8
zxAnGponCMinUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.9
zxAnGponCMinUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.10
zxAnGponCMinUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.11
zxAnGponCMinUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.12
zxAnGponCMinDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.13
zxAnGponCMinDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.14
zxAnGponCMinReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.15
zxAnGponCMinCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.16
zxAnGponCMinCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.17
zxAnGponCMinUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.18
zxAnGponCMinTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.19
zxAnGponCMinUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.20
zxAnGponCMinBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.21
zxAnGponCMinDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.22
zxAnGponCMinDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.23
zxAnGponCMinSnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.24
zxAnGponCMinDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.25
zxAnGponCMinBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.26
zxAnGponCMinAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.27
zxAnGponCMinRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.28
zxAnGponCMinDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.29
zxAnGponCMinDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.30
zxAnGponCMinKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.31
zxAnGponCMinSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.32
zxAnGponCMinSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.33
zxAnGponOltCMinReset
Clear all the current minutes interval performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.8.1.100

zxAnGponSrvOltHisMinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.2.9 · 1 row entry · 35 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltHisMinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltHisMinPerfTable' 
The minutes interval history performance data table of GPON OLT.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltHisMinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1
An entry in the OLT minutes interval history performance data table.
Indexes
Column Syntax OID
zxAnGponOltHMinIntervalNo
Performance data interval number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.1
zxAnGponOltHMinValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.2
zxAnGponOltHMinDateAndTime
The minutes interval performance data generation time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.3
zxAnGponHMinUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.4
zxAnGponHMinUsCorrectIdleGems
This attribute counts the number of upstream correct idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.5
zxAnGponHMinUsErrGemFrm
This attribute counts the number of upstream errored GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.6
zxAnGponHMinUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.7
zxAnGponHMinUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.8
zxAnGponHMinUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.9
zxAnGponHMinUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.10
zxAnGponHMinUsErrPloamMsgs
This attribute counts the number of upstream errored
PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.11
zxAnGponHMinUsErrBits
This attribute counts the number of upstream errored bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.12
zxAnGponHMinUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.13
zxAnGponHMinUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.14
zxAnGponHMinDsEtherFrm
This attribute counts the number of downstream Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.15
zxAnGponHMinDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.16
zxAnGponHMinReis
This attribute counts the number of REIs(Remote Error Indication)
from ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.17
zxAnGponHMinCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.18
zxAnGponHMinCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.19
zxAnGponHMinUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.20
zxAnGponHMinTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.21
zxAnGponHMinUsBip32Words
This attribute counts the number of total received words
protected by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.22
zxAnGponHMinBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.23
zxAnGponHMinDsXgemFrames
This attribute counts the total number of XGEM frames transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.24
zxAnGponHMinDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.25
zxAnGponHMinSnGrants
This attribute counts the number of serial number grants
for ONU discovery.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.26
zxAnGponHMinDsOnuRxPloamMsgs
This attribute counts the number of downstream PLOAM message
received by ONU.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.27
zxAnGponHMinBurstProfileMsgs
This attribute counts the number of burst profile messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.28
zxAnGponHMinAssignOnuIdMsgs
This attribute counts the number of Assign_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.29
zxAnGponHMinRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.30
zxAnGponHMinDeactivateOnuIdMsgs
This attribute counts the number of Deactivate_ONU-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.31
zxAnGponHMinDisableSnMsgs
This attribute counts the number of Disable_Serial_Number messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.32
zxAnGponHMinKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.33
zxAnGponHMinSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.34
zxAnGponHMinSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.2.2.9.1.35

zxAnGponSrvOltPonIfConfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.3 · 1 row entry · 22 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltPonIfConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltPonIfConfTable' 
The configuration table of OLT PON interface.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel), only for zxAnGponSrvPonFecMode.
zxAnGponSrvOltPonIfConfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1
An entry in the OLT PON interface configuration table.
Indexes
Column Syntax OID
zxAnGponSrvPonName
The name of the OLT PON interface.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-127
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.1
zxAnGponSrvPonAutoLearning
enabled:the PON port can auto register ONU when
unconfigured ONU is found.
disabled: ONU can only be registered by CLI or MIB.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.2
zxAnGponSrvPonFecMode
none: disable FEC.
downstream: enable downstream FEC only.
upstream: enable upstream FEC only.(NOT SUPPORTED)
bidirection: enable both upstream and downstream FEC.
(NOT SUPPORTED)
default: using system def…
Enumerationr/w
Enumerated Values:
1none
2downstream
3upstream
4bidirection
5default
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.3
zxAnGponSrvPonScbPort
It indicates the multicast GEM port ID of the PON port.
Integer32r/w
Constraints:
range: 129-4095
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.4
zxAnGponSrvPonBerInterval
It indicates the BER interval of all ONUs
of the PON port.
MillisecondInteger32r/w
Constraints:
range: 1-536870911
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.5
zxAnGponSrvPonUncfgOnuAgingTime
It indicates the aging time of the unconfigured ONU for auto
learning.
SecondsInteger32r/w
Constraints:
range: 2-3600
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.6
zxAnGponSrvRangeBase
It indicates the value of the base distance of the range.
The distance of the range is
[zxAnGponSrvRangeBase,zxAnGponSrvRangeBase + zxAnGponSrvRangeDiff],
For GPON, the maximum distance is 60km,
and the differential s…
100mSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.7
zxAnGponSrvRangeDiff
It indicates the distance of the range coverage area.
100mSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.8
zxAnGponSrvDiscoverPeriodNewOnu
To provide discover period of new ONU.
SecondsInteger32r/w
Constraints:
range: 2-3600
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.9
zxAnGponSrvDiscoverPeriodMissOnu
To provide discover period of missing ONU.
SecondsInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.10
zxAnGponSrvPonMcastEncryptEnable
It indicates whether multicast encryption is enabled at this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.11
zxAnGponSrvPonLosReason
OLT LOS reason.
allOnuPoweroff: all ONUs under the PON port are power off.
fiberBroken: the fiber trunk or branch is broken.
allOnuNeverOnline: all ONUs under the PON port are never
…
Enumeration
Enumerated Values:
1allOnuPowerOff
2fiberBroken
3allOnuNeverOnline
4otherReasons
5lastOnuOffline
6lastOnuDropped
7onlyOnuDropped
8lastOnuDyingGasp
9onlyOnuDyingGasp
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.12
zxAnGponSrvResoureIdAssginMode
Resoure ID assignment mode.
Resoure ID includes the Alloc-ID of T-CONT and the Port-ID
of GEM port.
auto: OLT assigns Alloc-ID and Port-ID automatically.
manualAllocId: OLT assigns Alloc-ID manually and assigns Port-ID…
Enumerationr/w
Enumerated Values:
1auto
2manualAllocId
3fixed
4manual
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.13
zxAnGponSrvPonRegisteredOnuNum
The number of the registered ONU under the PON port
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.14
zxAnGponSrvPonOnlineOnuNum
The number of the online ONU under the PON port
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.15
zxAnGponSrvPonLosEffect
The effect description for PON LOS alarms.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.16
zxAnGponSrvPonXgponOnuEn
Enable/disable access XGPON ONU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.17
zxAnGponSrvPonXgsponOnuEn
Enable/disable access XGPON ONU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.18
zxAnGponSrvPonXgponGponOnuEn
Enable/disable access XGPON ONU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.19
zxAnGponSrvPonXgsponGponOnuEn
Enable/disable access XGPON ONU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.20
zxAnGponSrvResIdAsgnFxdTconts
The maximum T-CONT number that can be configured for each ONU,
when zxAnGponSrvResoureIdAssginMode is fixed mode.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.21
zxAnGponSrvResIdAsgnFxdGemPorts
The maximum GEM port number that can be configured for each ONU,
when zxAnGponSrvResoureIdAssginMode is fixed mode.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.3902.1082.500.10.2.2.3.1.22

zxAnGponSrvOltOperTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.4 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltOperTable' 
Table of PON port operation.
zxAnGponSrvOltOperEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.4.1
It's the entry of zxAnGponSrvOltOperTable.
Indexes
Column Syntax OID
zxAnGponSrvOltDeactiveAllOnu
The action control to deactivate all the ONUs on the PON port.
Enumerationr/w
Enumerated Values:
1deactiveAllOnu
 .1.3.6.1.4.1.3902.1082.500.10.2.2.4.1.1
zxAnGponSrvOltEnableAllDeniedOnu
The action control to enable all the ONUs denied by
'Disable_serial_number' PLOAM message on the PON port.
Enumerationr/w
Enumerated Values:
1enableAllDeniedOnu
 .1.3.6.1.4.1.3902.1082.500.10.2.2.4.1.2
zxAnGponSrvOltReset
The action control to reset the OLT PON port.
Enumerationr/w
Enumerated Values:
1reset
 .1.3.6.1.4.1.3902.1082.500.10.2.2.4.1.3
zxAnGponSrvOltDisableAllOnu
The action control to disable all the ONUs by
'Disable_serial_number' PLOAM message on the PON port.
Enumerationr/w
Enumerated Values:
1disableAllOnu
 .1.3.6.1.4.1.3902.1082.500.10.2.2.4.1.4

zxAnGponSrvUnConfOnuTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.5 · 1 row entry · 10 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvUnConfOnuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvUnConfOnuTable' 
Table of unconfigured ONU.
zxAnGponSrvUnConfOnuEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1
Entry of unconfigured ONU.
Indexes
Column Syntax OID
zxAnGponSrvUnConfOnuIndex
The index of the unconfigured ONU.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.1
zxAnGponSrvUnConfOnuSn
The SN of the unconfigured ONU.
The serial number is unique for each ONU. It is defined in
[ITU-T G.984.3] and [ITU-T G.987.3] and contains the vendor id and
vendor specific serial number.
The first four bytes are an…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.2
zxAnGponSrvUnConfOnuPwd
The password reported by the ONU.
The format could be displayed for printable characters or hex
octets.
If the number of the printable characters of the password
is less than 10, zeros(0x00) will be padded in the tail.
OctetString
Constraints:
range: 10-10
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.3
zxAnGponSrvUnConfOnuLoid
This attribute identifies the LOID of the ONU.
SNMPv2-TCDisplayString
Constraints:
range: 0-24
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.4
zxAnGponSrvUnConfOnuLoidPwd
This attribute identifies the LOID password of the ONU.
The format could be displayed for printable characters or hex
octets.
If the number of the printable characters of the password
is less than 12, zeros(0x00) will …
OctetString
Constraints:
range: 12-12
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.5
zxAnGponSrvUnConfOnuRegId
This attribute identifies the registration ID of the ONU.
SNMPv2-TCDisplayString
Constraints:
range: 0-36
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.6
zxAnGponSrvUnConfOnuType
This attribute identifies the type of the ONU.
SNMPv2-TCDisplayString
Constraints:
range: 0-20
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.7
zxAnGponSrvUnConfOnuSwVer
This attribute identifies the version of the ONU.
SNMPv2-TCDisplayString
Constraints:
range: 0-14
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.8
zxAnGponSrvUnConfOnuOnlineTime
This attribute identifies the online time of the ONU.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.9
zxAnGponSrvUnConfOnuChannelId
This attribute identifies the channel ID of the ONU.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.3902.1082.500.10.2.2.5.1.10

zxAnGponSrvOltQosConfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.6 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOltQosConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOltQosConfTable' 
Table of GPON service OLT QoS configuration.
The 'IfType' of ifIndex supports 1(physical interface) 
and 5(PON channel).
zxAnGponSrvOltQosConfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.6.1
Entry of GPON OLT QoS configuration table.
Indexes
Column Syntax OID
zxAnGponSrvOltGemportUsedUsCir
The total used upstream CIR of all the GEM ports in this PON
port.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.6.1.1
zxAnGponSrvOltGemportUsedDsCir
The total used downstream CIR of all the GEM ports in this PON
port.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.6.1.2
zxAnGponSrvOltGemportAvailUsCir
The total available upstream CIR of all the GEM ports in this
PON port.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.6.1.3
zxAnGponSrvOltGemportAvailDsCir
The total available downstream CIR of all the GEM ports in this
PON port.
kbpsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.2.6.1.4

zxAnGponSrvUnconfOnuOperTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.7 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvUnconfOnuOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvUnconfOnuOperTable' 
The unconfigured ONU operation table.
zxAnGponSrvUnconfOnuOperEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.7.1
The unconfigured ONU operation entry.
Indexes
Column Syntax OID
zxAnSrvUnconfOnuForceOffline
The action control to force unconfigured onu offline.
Enumerationr/w
Enumerated Values:
1forceUnconfiguredOnuOffline
 .1.3.6.1.4.1.3902.1082.500.10.2.2.7.1.1

zxAnGponSrvRebootOnuTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.8 · 1 row entry · 7 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvRebootOnuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvRebootOnuTable' 
The PLOAM reboot ONU operation table.
zxAnGponSrvRebootOnuEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1
The PLOAM reboot ONU operation entry.
Indexes
Column Syntax OID
zxAnGponSrvRebootType
The reboot type.
allOnus(1): reboot all the ONUs of the PON port.
specifiedOnuId(2): reboot the specified ID's ONU.
specifiedOnuSn(3): reboot the specified SN's ONU.
Enumerationr/w
Enumerated Values:
1allOnus
2specifiedOnuId
3specifiedOnuSn
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.1
zxAnGponSrvRebootOnuId
The ONU ID.
This attribute is valid when zxAnGponSrvRebootType is
specifiedOnuId(2).
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.2
zxAnGponSrvRebootOnuSn
The ONU SN.
This attribute is valid when zxAnGponSrvRebootType is
specifiedOnuSn(3).
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.3
zxAnGponSrvRebootDepth
The reboot depth.
omciReboot(1): perform equivalent of OMCI reboot.
powerCycleReboot(2): perform equivalent of power cycle reboot.
factoryReboot(3): configuration reset, then perform MIB reset and
reboot.
Enumerationr/w
Enumerated Values:
1omciReboot
2powerCycleReboot
3factoryReboot
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.4
zxAnGponSrvRebootLoadImage
The load image mode.
committed(1): load and execute the image that is currently
committed.
nonCommitted(2): load and execute the image that is not currently
committed.
Enumerationr/w
Enumerated Values:
1committed
2nonCommitted
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.5
zxAnGponSrvRebootOnuState
The ONU state.
any(1): reboot if ONU is in any state.
o1o2o3(2): reboot only if ONU in states O1 or O2 or O3.
Enumerationr/w
Enumerated Values:
1any
2o1o2o3
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.6
zxAnGponSrvRebootCallState
The call state.
regardless(1): reboot regardless of POTS/VoIP call state.
noCall(2): reboot only if no POTS/VoIP calls are in progress.
noEmergencyCall(3): reboot only if no emergency call is in
progress.
Enumerationr/w
Enumerated Values:
1regardless
2noCall
3noEmergencyCall
 .1.3.6.1.4.1.3902.1082.500.10.2.2.8.1.7

zxAnGponSrvPonIdConfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.2.21.2 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvPonIdConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvPonIdConfTable' 
The PON port identifier configuration table.
zxAnGponSrvPonIdConfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.2.21.2.1
The PON port identifier configuration entry.
Indexes
Column Syntax OID
zxAnGponSrvPonIdFormat
PON port identifier format.
This attribute is valid when zxAnGponSrvPonIdEnable is enabled(1).
Enumerationr/w
Enumerated Values:
1ascii
2hex
 .1.3.6.1.4.1.3902.1082.500.10.2.2.21.2.1.1
zxAnGponSrvPonId
PON port identifier.
This attribute is valid when zxAnGponSrvPonIdEnable is enabled(1).
If zxAnGponSrvPonIdFormat is ascii(1) then the value is ASCII
string, if zxAnGponSrvPonIdFormat is hex(2) then the value is
hex da…
OctetStringr/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.3902.1082.500.10.2.2.21.2.1.2

zxAnGponSrvOnuCurrPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.2 · 1 row entry · 49 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuCurrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuCurrPerfTable' 
The GPON ONU current performance data table
zxAnGponSrvOnuCurrPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1
The entry in the ONU current performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuUsCorrectNIdleGems
This attribute counts the number of upstream correct no-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.1
zxAnGponOnuUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.2
zxAnGponOnuUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.3
zxAnGponOnuUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.4
zxAnGponOnuUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.5
zxAnGponOnuUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.6
zxAnGponOnuUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.7
zxAnGponOnuUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.8
zxAnGponOnuUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.9
zxAnGponOnuUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.10
zxAnGponOnuDsCorrectNIdleGems
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.11
zxAnGponOnuDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.12
zxAnGponOnuDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.13
zxAnGponOnuReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.14
zxAnGponOnuCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.15
zxAnGponOnuCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.16
zxAnGponOnuUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.17
zxAnGponOnuTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.18
zxAnGponOnuUsBer
Upstream Bit Error Rate, in 10^-9 granularity.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.19
zxAnGponOnuUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.20
zxAnGponOnuLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.21
zxAnGponOnuDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.22
zxAnGponOnuUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.23
zxAnGponOnuBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.24
zxAnGponOnuXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.25
zxAnGponOnuLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.26
zxAnGponOnuXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.27
zxAnGponOnuDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in
non-idle XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.28
zxAnGponOnuRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.29
zxAnGponOnuPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.30
zxAnGponOnuRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.31
zxAnGponOnuReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.32
zxAnGponOnuAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.33
zxAnGponOnuKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.34
zxAnGponOnuSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.35
zxAnGponOnuSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.36
zxAnGponOnuRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.37
zxAnGponOnuKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.38
zxAnGponOnuAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.39
zxAnGponOnuSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.40
zxAnGponOnuOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.41
zxAnGponOnuOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.42
zxAnGponOnuOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.43
zxAnGponOnuOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.44
zxAnGponOnuDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.45
zxAnGponOnuDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.46
zxAnGponOnuUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.47
zxAnGponOnuPerfCapability
The attribute indicates that the supports of GPON ONU performance,
each bit from left to right represents the support of performance
statistic from top to bottom in this MIB table, value 1 represents
support and value…
Bits
Enumerated Values:
0zxAnGponOnuUsCorrectNIdleGems
1zxAnGponOnuUsGemPayloadBytes
2zxAnGponOnuUsCorrectEtherFrm
3zxAnGponOnuUsErrEtherFrm
4zxAnGponOnuUsPloamMsgs
5zxAnGponOnuUsOmciMsgs
6zxAnGponOnuUsErrBits
7zxAnGponOnuUsTotalBits
8zxAnGponOnuUsCrcErrPkts
9zxAnGponOnuUsLostBursts
10zxAnGponOnuDsCorrectNIdleGems
11zxAnGponOnuDsPloamMsgs
12zxAnGponOnuDsOmciMsgs
13zxAnGponOnuReiis
14zxAnGponOnuCorrectedBytes
15zxAnGponOnuCorrectedWords
16zxAnGponOnuUncorrectedWords
17zxAnGponOnuTotalRxWords
18zxAnGponOnuUsBer
19zxAnGponOnuUsHecErrs
20zxAnGponOnuLofiAlarms
21zxAnGponOnuDowiAlarms
22zxAnGponOnuUsBip32Words
23zxAnGponOnuBip32Errors
24zxAnGponOnuXgemFhHecErrs
25zxAnGponOnuLostFrameWords
26zxAnGponOnuXgemKeyErrors
27zxAnGponOnuDsNIdleXgemBytes
28zxAnGponOnuRxDgBursts
29zxAnGponOnuPloamMicErrors
30zxAnGponOnuRangingTimeMsgs
31zxAnGponOnuReqRegMsgs
32zxAnGponOnuAssignAllocIdMsgs
33zxAnGponOnuKeyControlMsgs
34zxAnGponOnuSleepAllowMsgs
35zxAnGponOnuSnOnuMsgs
36zxAnGponOnuRegistrationMsgs
37zxAnGponOnuKeyReportMsgs
38zxAnGponOnuAckMsgs
39zxAnGponOnuSleepRequestMsgs
40zxAnGponOnuOmciBaseMsgs
41zxAnGponOnuOmciExMsgs
42zxAnGponOnuOmciAutoMsgs
43zxAnGponOnuOmciMicErrors
44zxAnGponOnuDsOmciBaseMsgs
45zxAnGponOnuDsOmciExMsgs
46zxAnGponOnuUsFecSeconds
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.99
zxAnGponOnuCurrReset
Clear all the current performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.2.1.100

zxAnGponSrvOnuCurr15MinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.4 · 1 row entry · 48 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuCurr15MinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuCurr15MinPerfTable' 
The current 15 minutes performance 
data table of GPON ONU.
zxAnGponSrvOnuCurr15MinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1
An entry in the ONU current 15 minutes performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuC15MTimeElapsed
Number of seconds that have elapsed since the
beginning of the current 15 minutes interval.
SecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.1
zxAnGponOnuC15MUsCorrectNIdleGem
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.2
zxAnGponOnuC15MUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.3
zxAnGponOnuC15MUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.4
zxAnGponOnuC15MUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.5
zxAnGponOnuC15MUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.6
zxAnGponOnuC15MUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.7
zxAnGponOnuC15MUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.8
zxAnGponOnuC15MUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.9
zxAnGponOnuC15MUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.10
zxAnGponOnuC15MUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.11
zxAnGponOnuC15MDsCorrectNIdleGem
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.12
zxAnGponOnuC15MDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.13
zxAnGponOnuC15MDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.14
zxAnGponOnuC15MReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.15
zxAnGponOnuC15MCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.16
zxAnGponOnuC15MCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.17
zxAnGponOnuC15MUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.18
zxAnGponOnuC15MTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.19
zxAnGponOnuC15MUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.20
zxAnGponOnuC15MLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.21
zxAnGponOnuC15MDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.22
zxAnGponOnuC15MUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.23
zxAnGponOnuC15MBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.24
zxAnGponOnuC15MXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.25
zxAnGponOnuC15MLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.26
zxAnGponOnuC15MXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.27
zxAnGponOnuC15MDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.28
zxAnGponOnuC15MRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.29
zxAnGponOnuC15MPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.30
zxAnGponOnuC15MRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.31
zxAnGponOnuC15MReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.32
zxAnGponOnuC15MAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.33
zxAnGponOnuC15MKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.34
zxAnGponOnuC15MSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.35
zxAnGponOnuC15MSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.36
zxAnGponOnuC15MRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.37
zxAnGponOnuC15MKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.38
zxAnGponOnuC15MAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.39
zxAnGponOnuC15MSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.40
zxAnGponOnuC15MOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.41
zxAnGponOnuC15MOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.42
zxAnGponOnuC15MOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.43
zxAnGponOnuC15MOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.44
zxAnGponOnuC15MDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.45
zxAnGponOnuC15MDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.46
zxAnGponOnuC15MUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.47
zxAnGponOnuC15MReset
Clear all the current 15-minutes performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.4.1.100

zxAnGponSrvOnuCurr1DayPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.5 · 1 row entry · 48 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuCurr1DayPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuCurr1DayPerfTable' 
The current 1 day performance data table of GPON ONU.
zxAnGponSrvOnuCurr1DayPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1
The entry in the ONU current 1 day performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuC1DTimeElapsed
Number of seconds that have elapsed since the
beginning of the current 1 day interval.
SecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.1
zxAnGponOnuC1DUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.2
zxAnGponOnuC1DUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.3
zxAnGponOnuC1DUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.4
zxAnGponOnuC1DUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.5
zxAnGponOnuC1DUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.6
zxAnGponOnuC1DUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.7
zxAnGponOnuC1DUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.8
zxAnGponOnuC1DUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.9
zxAnGponOnuC1DUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.10
zxAnGponOnuC1DUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.11
zxAnGponOnuC1DDsCorrectNIdleGems
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.12
zxAnGponOnuC1DDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.13
zxAnGponOnuC1DDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.14
zxAnGponOnuC1DReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.15
zxAnGponOnuC1DCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.16
zxAnGponOnuC1DCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.17
zxAnGponOnuC1DUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.18
zxAnGponOnuC1DTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.19
zxAnGponOnuC1DUsHecErrs
This attribute counts the total number of the upstream HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.20
zxAnGponOnuC1DLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.21
zxAnGponOnuC1DDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.22
zxAnGponOnuC1DUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.23
zxAnGponOnuC1DBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.24
zxAnGponOnuC1DXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.25
zxAnGponOnuC1DLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.26
zxAnGponOnuC1DXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.27
zxAnGponOnuC1DDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.28
zxAnGponOnuC1DRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.29
zxAnGponOnuC1DPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.30
zxAnGponOnuC1DRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.31
zxAnGponOnuC1DReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.32
zxAnGponOnuC1DAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.33
zxAnGponOnuC1DKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.34
zxAnGponOnuC1DSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.35
zxAnGponOnuC1DSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.36
zxAnGponOnuC1DRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.37
zxAnGponOnuC1DKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.38
zxAnGponOnuC1DAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.39
zxAnGponOnuC1DSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.40
zxAnGponOnuC1DOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.41
zxAnGponOnuC1DOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.42
zxAnGponOnuC1DOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.43
zxAnGponOnuC1DOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.44
zxAnGponOnuC1DDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.45
zxAnGponOnuC1DDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.46
zxAnGponOnuC1DUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.47
zxAnGponOnuC1DReset
Clear all the current 1 day performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.5.1.100

zxAnGponSrvOnuHis15MinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.6 · 1 row entry · 49 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuHis15MinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuHis15MinPerfTable' 
The 15 minutes interval performance data table of GPON ONU.
zxAnGponSrvOnuHis15MinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1
The entry in the ONU 15 minutes interval performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuH15MIntervalNo
Performance Data.

Interval 1 is the the most recent previous interval.
Interval 96 is 24 hours ago.
Intervals from 2 to 96 are optional.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.1
zxAnGponOnuH15MValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.2
zxAnGponOnuH15MDateAndTime
15min performance data interval create time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.3
zxAnGponOnuH15MUsCorrectNIdleGem
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.4
zxAnGponOnuH15MUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.5
zxAnGponOnuH15MUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.6
zxAnGponOnuH15MUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.7
zxAnGponOnuH15MUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.8
zxAnGponOnuH15MUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.9
zxAnGponOnuH15MUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.10
zxAnGponOnuH15MUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.11
zxAnGponOnuH15MUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.12
zxAnGponOnuH15MUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.13
zxAnGponOnuH15MDsCorrectNIdleGem
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.14
zxAnGponOnuH15MDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.15
zxAnGponOnuH15MDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.16
zxAnGponOnuH15MReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.17
zxAnGponOnuH15MCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.18
zxAnGponOnuH15MCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.19
zxAnGponOnuH15MUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.20
zxAnGponOnuH15MTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.21
zxAnGponOnuH15MUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.22
zxAnGponOnuH15MLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.23
zxAnGponOnuH15MDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.24
zxAnGponOnuH15MUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.25
zxAnGponOnuH15MBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.26
zxAnGponOnuH15MXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.27
zxAnGponOnuH15MLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.28
zxAnGponOnuH15MXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.29
zxAnGponOnuH15MDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.30
zxAnGponOnuH15MRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.31
zxAnGponOnuH15MPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.32
zxAnGponOnuH15MRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.33
zxAnGponOnuH15MReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.34
zxAnGponOnuH15MAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.35
zxAnGponOnuH15MKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.36
zxAnGponOnuH15MSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.37
zxAnGponOnuH15MSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.38
zxAnGponOnuH15MRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.39
zxAnGponOnuH15MKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.40
zxAnGponOnuH15MAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.41
zxAnGponOnuH15MSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.42
zxAnGponOnuH15MOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.43
zxAnGponOnuH15MOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.44
zxAnGponOnuH15MOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.45
zxAnGponOnuH15MOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.46
zxAnGponOnuH15MDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.47
zxAnGponOnuH15MDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.48
zxAnGponOnuH15MUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.6.1.49

zxAnGponSrvOnuHis1DayPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.7 · 1 row entry · 49 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuHis1DayPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuHis1DayPerfTable' 
The 1 day interval performance data table of GPON ONU.
zxAnGponSrvOnuHis1DayPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1
The entry in the ONU 1 day interval performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuH1DIntervalNo
Performance Data.

Interval 1 is the the most recent previous interval.
Interval 7 is 1 week ago.
Intervals from 2 to 7 are optional.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.1
zxAnGponOnuH1DValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.2
zxAnGponOnuH1DDateAndTime
The 1 day performace data interval create time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.3
zxAnGponOnuH1DUsCorrectNIdleGems
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.4
zxAnGponOnuH1DUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.5
zxAnGponOnuH1DUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.6
zxAnGponOnuH1DUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.7
zxAnGponOnuH1DUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.8
zxAnGponOnuH1DUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.9
zxAnGponOnuH1DUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.10
zxAnGponOnuH1DUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.11
zxAnGponOnuH1DUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.12
zxAnGponOnuH1DUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.13
zxAnGponOnuH1DDsCorrectNIdleGems
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.14
zxAnGponOnuH1DDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.15
zxAnGponOnuH1DDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.16
zxAnGponOnuH1DReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.17
zxAnGponOnuH1DCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.18
zxAnGponOnuH1DCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.19
zxAnGponOnuH1DUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.20
zxAnGponOnuH1DTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.21
zxAnGponOnuH1DUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.22
zxAnGponOnuH1DLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.23
zxAnGponOnuH1DDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.24
zxAnGponOnuH1DUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.25
zxAnGponOnuH1DBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.26
zxAnGponOnuH1DXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.27
zxAnGponOnuH1DLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.28
zxAnGponOnuH1DXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.29
zxAnGponOnuH1DDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.30
zxAnGponOnuH1DRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.31
zxAnGponOnuH1DPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.32
zxAnGponOnuH1DRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.33
zxAnGponOnuH1DReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.34
zxAnGponOnuH1DAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.35
zxAnGponOnuH1DKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.36
zxAnGponOnuH1DSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.37
zxAnGponOnuH1DSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.38
zxAnGponOnuH1DRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.39
zxAnGponOnuH1DKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.40
zxAnGponOnuH1DAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.41
zxAnGponOnuH1DSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.42
zxAnGponOnuH1DOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.43
zxAnGponOnuH1DOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.44
zxAnGponOnuH1DOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.45
zxAnGponOnuH1DOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.46
zxAnGponOnuH1DDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.47
zxAnGponOnuH1DDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.48
zxAnGponOnuH1DUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.7.1.49

zxAnGponSrvOnuCurrMinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.8 · 1 row entry · 48 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuCurrMinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuCurrMinPerfTable' 
The minutes interval performance data table of GPON ONU.
zxAnGponSrvOnuCurrMinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1
An entry in the ONU minutes interval performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuCMinTimeElapsed
Number of seconds that have elapsed since the
beginning of the current minutes interval.
SecondsHC-PerfHist-TC-MIBHCPerfTimeElapsed
Type Constraints:
range: 0..86399
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.1
zxAnGponOnuCMinUsCorrectNIdleGem
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.2
zxAnGponOnuCMinUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.3
zxAnGponOnuCMinUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.4
zxAnGponOnuCMinUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.5
zxAnGponOnuCMinUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.6
zxAnGponOnuCMinUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.7
zxAnGponOnuCMinUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.8
zxAnGponOnuCMinUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.9
zxAnGponOnuCMinUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.10
zxAnGponOnuCMinUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.11
zxAnGponOnuCMinDsCorrectNIdleGem
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.12
zxAnGponOnuCMinDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.13
zxAnGponOnuCMinDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.14
zxAnGponOnuCMinReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.15
zxAnGponOnuCMinCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.16
zxAnGponOnuCMinCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.17
zxAnGponOnuCMinUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.18
zxAnGponOnuCMinTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.19
zxAnGponOnuCMinUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.20
zxAnGponOnuCMinLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.21
zxAnGponOnuCMinDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.22
zxAnGponOnuCMinUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.23
zxAnGponOnuCMinBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.24
zxAnGponOnuCMinXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.25
zxAnGponOnuCMinLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.26
zxAnGponOnuCMinXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.27
zxAnGponOnuCMinDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.28
zxAnGponOnuCMinRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.29
zxAnGponOnuCMinPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.30
zxAnGponOnuCMinRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.31
zxAnGponOnuCMinReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.32
zxAnGponOnuCMinAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.33
zxAnGponOnuCMinKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.34
zxAnGponOnuCMinSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.35
zxAnGponOnuCMinSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.36
zxAnGponOnuCMinRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.37
zxAnGponOnuCMinKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.38
zxAnGponOnuCMinAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.39
zxAnGponOnuCMinSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.40
zxAnGponOnuCMinOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.41
zxAnGponOnuCMinOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.42
zxAnGponOnuCMinOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.43
zxAnGponOnuCMinOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.44
zxAnGponOnuCMinDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.45
zxAnGponOnuCMinDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.46
zxAnGponOnuCMinUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.47
zxAnGponOnuCMinReset
Clear all the current minutes interval performance variables.
When get this variable, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.8.1.100

zxAnGponSrvOnuHisMinPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.2.9 · 1 row entry · 49 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuHisMinPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuHisMinPerfTable' 
The minutes interval history performance data table of GPON ONU.
zxAnGponSrvOnuHisMinPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1
An entry in the ONU minutes interval history performance data table.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponOnuHMinIntervalNo
Performance data interval number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.1
zxAnGponOnuHMinValidData
Performance data valid flag.
true(1) means valid.
false(2) means invalid and the performace data is useless.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.2
zxAnGponOnuHMinDateAndTime
The minutes interval performance data generation time.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.3
zxAnGponOnuHMinUsCorrectNIdleGem
This attribute counts the number of upstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.4
zxAnGponOnuHMinUsGemPayloadBytes
This attribute counts the number of upstream GEM payload bytes.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.5
zxAnGponOnuHMinUsCorrectEtherFrm
This attribute counts the number of upstream correct
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.6
zxAnGponOnuHMinUsErrEtherFrm
This attribute counts the number of upstream errored
Ethernet frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.7
zxAnGponOnuHMinUsPloamMsgs
This attribute counts the number of upstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.8
zxAnGponOnuHMinUsOmciMsgs
This attribute counts the number of upstream OMCI messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.9
zxAnGponOnuHMinUsErrBits
This attribute counts the number of upstream errored bits.
The received BIP-8 is compared with the calculated BIP-8 on the
received stream. In case of a difference, ERRi counter is
incremented. The number of differing…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.10
zxAnGponOnuHMinUsTotalBits
This attribute counts the number of upstream total bits.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.11
zxAnGponOnuHMinUsCrcErrPkts
This attribute counts the number of upstream CRC errored packets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.12
zxAnGponOnuHMinUsLostBursts
This attribute counts the number of upstream lost bursts.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.13
zxAnGponOnuHMinDsCorrectNIdleGem
This attribute counts the number of downstream correct non-idle
GEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.14
zxAnGponOnuHMinDsPloamMsgs
This attribute counts the number of downstream PLOAM messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.15
zxAnGponOnuHMinDsOmciMsgs
The total number of not corrected words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.16
zxAnGponOnuHMinReiis
This attribute counts the number of REIs(Remote Error Indication)
from ONUi.
Once the ONU detects BIP errors, it sends upstream the number of
errors inside the REI PLOAM message. When the received REIi message
is diff…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.17
zxAnGponOnuHMinCorrectedBytes
This attribute counts the number of bytes which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.18
zxAnGponOnuHMinCorrectedWords
This attribute counts the number of code words which were
corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.19
zxAnGponOnuHMinUncorrectedWords
This attribute counts the number of code words which could not
be corrected by FEC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.20
zxAnGponOnuHMinTotalRxWords
This attribute counts the number of total received code words.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.21
zxAnGponOnuHMinUsHecErrs
This attribute counts the total number of the upstream HEC errors.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.22
zxAnGponOnuHMinLofiAlarms
This attribute counts the total number of the ONU's LOFi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.23
zxAnGponOnuHMinDowiAlarms
This attribute counts the total number of the ONU's DOWi alarms.
It is only supported by C600 serial.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.24
zxAnGponOnuHMinUsBip32Words
This attribute counts the number of total received words protected
by BIP-32.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.25
zxAnGponOnuHMinBip32Errors
This attribute counts the number of BIP-32 errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.26
zxAnGponOnuHMinXgemFhHecErrs
This attribute counts the number of XGEM frame header HEC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.27
zxAnGponOnuHMinLostFrameWords
This attribute counts the number of FS or XGTC frame words lost
due to XGEM or GEM frame HEC error.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.28
zxAnGponOnuHMinXgemKeyErrors
This attribute counts the number of XGEM key errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.29
zxAnGponOnuHMinDsNIdleXgemBytes
This attribute counts the number of transmitted bytes in non-idle
XGEM frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.30
zxAnGponOnuHMinRxDgBursts
This attribute counts the number of dying gasp bursts received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.31
zxAnGponOnuHMinPloamMicErrors
This attribute counts the number of PLOAM MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.32
zxAnGponOnuHMinRangingTimeMsgs
This attribute counts the number of Ranging_Time messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.33
zxAnGponOnuHMinReqRegMsgs
This attribute counts the number of Request_Registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.34
zxAnGponOnuHMinAssignAllocIdMsgs
This attribute counts the number of Assign_Alloc-ID messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.35
zxAnGponOnuHMinKeyControlMsgs
This attribute counts the number of Key_Control messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.36
zxAnGponOnuHMinSleepAllowMsgs
This attribute counts the number of Sleep_Allow messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.37
zxAnGponOnuHMinSnOnuMsgs
This attribute counts the number of Serial_Number_ONU messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.38
zxAnGponOnuHMinRegistrationMsgs
This attribute counts the number of registration messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.39
zxAnGponOnuHMinKeyReportMsgs
This attribute counts the number of Key_Report messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.40
zxAnGponOnuHMinAckMsgs
This attribute counts the number of acknowledgement messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.41
zxAnGponOnuHMinSleepRequestMsgs
This attribute counts the number of Sleep_Request messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.42
zxAnGponOnuHMinOmciBaseMsgs
This attribute counts the number of OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.43
zxAnGponOnuHMinOmciExMsgs
This attribute counts the number of OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.44
zxAnGponOnuHMinOmciAutoMsgs
This attribute counts the number of OMCI autonomous messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.45
zxAnGponOnuHMinOmciMicErrors
This attribute counts the number of OMCI MIC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.46
zxAnGponOnuHMinDsOmciBaseMsgs
This attribute counts the number of downstream OMCI baseline messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.47
zxAnGponOnuHMinDsOmciExMsgs
This attribute counts the number of downstream OMCI extended messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.48
zxAnGponOnuHMinUsFecSeconds
This attribute counts the number of seconds during which an
uncorrectable codeword was received in the upstream direction.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.2.9.1.49

zxAnGponSrvOnuMgmtTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.3 · 1 row entry · 26 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuMgmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuMgmtTable' 
The Table of ONU managment.
zxAnGponSrvOnuMgmtEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1
The Entry of ONU managment. The index 'zxAnPonOnuIndex' represents
the normal ONU index or the virtual ONU index for profile.
Indexes
Column Syntax OID
zxAnGponOnuMgmtTypeName
The ONU type name which should refer to the entry of
zxAnPonOnuTypeTable.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.1
zxAnGponOnuMgmtName
The name of the ONU.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-158
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.2
zxAnGponOnuMgmtDesc
The description of the ONU.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-200
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.3
zxAnGponOnuMgmtOpticalLineSn
The SN of the optical line.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.4
zxAnGponOnuMgmtRegMode
This attribute indicates the ONU registration mode.
regModeSn: GPON/XGPON - G.984 G.987 - 8bytes
regModePwd: GPON - G.984 - 10Bytes
regModeSnPlusPwd: GPON - G.984 - 8+10Bytes
regModeRegisterId: GPON/XGPON - G.984 G.987 …
Enumerationr/w
Enumerated Values:
1regModeSn
2regModePwd
3regModeSnPlusPwd
4regModeRegisterId
5regModeRegisterIdPlus8021x
6regModeRegisterIdPlusMutual
7regModeHexPwd
8regModeSnPlusHexPwd
9regModeLoid
10regModeLoidPlusPwd
11regModeSnPlusRegisterId
12regModePsk
13regModeHexRegisterId
14regModeSnPlusHexRegisterId
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.5
zxAnGponOnuMgmtSn
SN configured by OLT for the purpose of register.
The serial number is unique for each ONU. It is defined in
[ITU-T G.984.3] and [ITU-T G.987.3] and contains the vendor id and
vendor specific serial number.
The first…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.6
zxAnGponOnuMgmtPwd
Password configured by OLT for the purpose of register.
This attribute is valid when 'zxAnGponOnuMgmtRegMode' is following
value:
regModePwd(2) - 10 Bytes,
regModeSnPlusPwd(3) - 10 Bytes,
regModeHexPwd(7) - 10 Bytes(he…
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.7
zxAnGponOnuMgmtLoid
LOID configured by OLT for the purpose of register.
This attribute is valid when 'zxAnGponOnuMgmtRegMode' is following
value:
regModeLoid(9)
regModeLoidPlusPwd(10)
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-24
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.8
zxAnGponOnuMgmtRegistrationId
Registration ID configured by OLT for the purpose of register.
This attribute is valid when 'zxAnGponOnuMgmtRegMode' is following
value:
regModeRegisterId(4) - 36 Bytes,
regModeRegisterIdPlus8021x(5) - 36 Bytes,
regMod…
OctetStringr/w
Constraints:
range: 0-36
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.9
zxAnGponOnuMgmtTargetStatus
deactive(1): disable ONU control channel.
omccReady(2): enable ONU control channel.
Enumerationr/w
Enumerated Values:
1deactive
2omccReady
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.10
zxAnGponOnuMgmtVportMode
gemport:A related VPort will be auto created once GEM port created.
onu:ONU only has one VPort.
manul:VPort should be created manually, and the map between
GEM port and VPort should be specified.
Enumerationr/w
Enumerated Values:
1gemport
2onu
3manul
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.11
zxAnGponOnuMgmtDbaMode
sr:SR (Status Reporting)-DBA
nsr:NSR (Non-Status Reporting)-DBA
hybrid:hybrid with SR and NSR
Enumerationr/w
Enumerated Values:
1sr
2nsr
3hybrid
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.12
zxAnGponOnuMgmtOmccBwPrfName
This object indicates the OMCI channel bandwidth profile according
to 'zxAnGponSrvBwPrfName' in 'zxAnGponSrvBandwidthPrfTable'.
Name with NULL string indicates using the
system default bandwidth.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.13
zxAnGponOnuMgmtEnableWithSn
To disable/enable an ONU with this serial number.:
False moves the ONU to the emergency stop state.
Therefore the ONU cannot respond to upstream bandwidth allocations.
True moves the ONU to the standby state.
Then the…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.14
zxAnGponOnuMgmtAuthPassCtrl
This variable indicates the ONU authentication successful
forwarding actions.The 'zxAnGponOnuMgmtAuthPassCtrl' is a bitmap
represented as a sum, therefore, it can represent multiple
forwarding action.

T…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.15
zxAnGponOnuMgmtUsFecEnable
Enables or disables the ONU upstream FEC function.
enabled(1): enable the ONU upstream FEC function.
disabled(2): disable the ONU upstream FEC function.
auto(3): system will enable or disable the ONU upstream FEC
…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3auto
4default
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.16
zxAnGponOnuMgmtReonlineAuthInfo
The variable indicates the authentication information need to
authenticate when ONU re-online. Only authentication parameters
authenticated when ONU online at the first time. There are three
authentication cases bebl…
Enumerationr/w
Enumerated Values:
1snAndAuthValue
2sn
3authValue
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.17
zxAnGponOnuMgmtRegistrationInfo
ONU registration information.
This attribute is made up of registration mode and registration
values. Commas are used to separate registration mode
and registration values. A number is used to represent
registration mod…
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.18
zxAnGponOnuMgmtOmccEncryptEnable
The status of the encryption of OMCC.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.19
zxAnGponOnuMgmtBerInterval
It indicates the BER interval of the ONU.
MillisecondsInteger32r/w
Constraints:
range: 1-536870911
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.20
zxAnGponOnuMgmtToDEnable
It indicates the ONU ToD message status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.21
zxAnGponOnuMcastEncryptEnable
It indicates whether the ONU can receive encrypted multicast data.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.22
zxAnGponOnuMgmtPsk
PSK value configured by OLT for the purpose of register.
This attribute is valid when 'zxAnGponOnuMgmtRegMode' is
regModePsk(12) and this attribute value is hex data.
Value 0 indicates this attribute is invalid.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.23
zxAnGponOnuMgmtChannelId
It indicates the ONU channel ID.
The value 0 indicates the channel ID is not configured.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.24
zxAnGponOnuMgmtChanSwitchFailRsn
ONU channel switching failed reason.
outOfResources(1): out of resources.
others(10): other failed reasons.
Enumeration
Enumerated Values:
1outOfResources
10others
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.25
zxAnGponOnuMgmtRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.3.1.50

zxAnGponSrvTcontTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.4 · 1 row entry · 6 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvTcontTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvTcontTable' 
This table represents ONU's information of T-CONT.
zxAnGponSrvTcontEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1
The index 'zxAnPonOnuIndex' represents the normal ONU index or the
virtual ONU index for profile. When creating a T-CONT, only
zxAnGponSrvTcontRowStatus is mandatory variable.
Indexes
Column Syntax OID
zxAnGponSrvTcontIndex
An arbitrary(unique) integer for identifying an entry
in the table, from 1 to upper limit supported T-CONT count of
ONU type.
ZTE-AN-PON-TC-MIBZxAnGponOnuTcontIndex
Description:
ZxAnGponOnuTcontIndex reprensents the index of T-CONT in ONU,
from 1 to upper limit supported T-CONT count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.1
zxAnGponSrvTcontName
Name of the T-CONT.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.2
zxAnGponSrvTcontBwPrfName
This attribute is the name of profile
used by T-CONT bandwidth configuration.
According to 'zxAnGponSrvBwPrfName' in
'zxAnGponSrvBandwidthPrfTable'.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.3
zxAnGponSrvTcontAllocId
This attribute is the Alloc-ID of T-CONT.
Only when zxAnGponSrvResoureIdAssginMode is 'manual' or
'manualAllocId' that this attribute can be configured.
If this attribute is not configured, it will be auto assigned by …
Integer32r/w
Constraints:
range: 256-4095
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.4
zxAnGponSrvTcontDbaGapMode
This attribute specifies the DBA gap mode.
For GPON ONU,the explanations of these modes are as follows:
mode0 is one frame,
mode1 is two frames,
mode2 is four frames,
mode3 is eight frames,
default is the …
Enumerationr/w
Enumerated Values:
1mode0
2mode1
3mode2
4mode3
11default
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.5
zxAnGponSrvTcontRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.4.1.50

zxAnGponSrvGemPortTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.5 · 1 row entry · 12 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvGemPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvGemPortTable' 
This table represents the GEM port configuration.
zxAnGponSrvGemPortEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1
The index 'zxAnPonOnuIndex' represents the normal ONU index or the
virtual ONU index for profile.
Mandatory variables must be in the one snmp create operation :
zxAnGponSrvGemPortTcontIndex,
zxAnGponSrvGemPortRowStatus
Indexes
Column Syntax OID
zxAnGponSrvGemPortIndex
An arbitrary(unique) integer for identifying an entry
in the table, from 1 to upper limit supported GEM port count of
ONU type.
ZTE-AN-PON-TC-MIBZxAnGponOnuGemPortIndex
Description:
ZxAnGponOnuGemPortIndex reprensents the index of GEM port in ONU,
from 1 to upper limit supported GEM port count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.1
zxAnGponSrvGemPortName
This attribute specifies the name of the GEM port.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.2
zxAnGponSrvGemPortTcontIndex
It is equal to the 'zxAnGponSrvOnuTcontIndex'
of 'zxAnGponSrvOnuTcontTable'.
ZTE-AN-PON-TC-MIBZxAnGponOnuTcontIndexr/w
Description:
ZxAnGponOnuTcontIndex reprensents the index of T-CONT in ONU,
from 1 to upper limit supported T-CONT count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.3
zxAnGponSrvGemPortPortId
Port-ID of GEM port.
Only when zxAnGponSrvResoureIdAssginMode is 'manual' that
this attribute can be configured.
If this attribute is not configured, it will be auto assigned by
OLT.
When zxAnGponSrvCapabilities bit 5…
Integer32r/w
Constraints:
range: 129-4095
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.4
zxAnGponSrvGemPortQueueOfTcont
The queue(index from 0 to 7) of T-CONT for this GEM port.
Queue 7 is the highest priority queue.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.5
zxAnGponSrvGemPortEnable
Active/deactive GEM port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.6
zxAnGponSrvGemPortDsQueueMapId
The downstream queue map ID for GEM port at OLT side.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.7
zxAnGponSrvGemPortUsQueueMapId
The upstream queue map ID for GEM port at OLT side.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.8
zxAnGponSrvGemPortEncrypt
The encrypt state of this GEM port
Enumerationr/w
Enumerated Values:
1downstreamEncrypt
2noEncrypt
3bothDirectEncrypt
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.9
zxAnGponSrvGemPortUsTrafficPrf
Refers to 'zxAnGponSrvTrafficPrfName', upstream traffic
limit of GEM port at OLT side.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.10
zxAnGponSrvGemPortDsTrafficPrf
Refers to 'zxAnGponSrvTrafficPrfName', downstream traffic
limit of GEM port at OLT side.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.11
zxAnGponSrvGemPortRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

In particular, a newly created row cannot be created
until the correspond…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.5.1.50

zxAnGponSrvBpConfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.6 · 1 row entry · 5 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvBpConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvBpConfTable' 
Table of the VPort.
zxAnGponSrvBpConfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1
Entry of the VPort. The index 'zxAnPonOnuIndex' represents
the normal ONU index or the virtual ONU index for profile.
Indexes
Column Syntax OID
zxAnGponSrvBpVportId
VPort ID.
ZTE-AN-PON-TC-MIBZxAnGponOnuVportIndex
Description:
ZxAnGponOnuVportIndex reprensents the index of vport in ONU,
from 1 to 256.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1.1
zxAnGponSrvBpName
Name of the VPort.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1.2
zxAnGponSrvBpMapType
Map type of GEM port and VPort,
cos(1): mapping by CoS value
'zxAnGponSrvBpMapConfVid' will be ignored when creating
bp-map.

vlan(2): mapping by VLAN value
'zxAnGponSrvBpMapConfCos' will be ignored when …
Enumerationr/w
Enumerated Values:
1cos
2vlan
3cosPlusVlan
4oneToOne
 .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1.3
zxAnGponSrvBpAssignStatus
VPort assignment status.
Enumeration
Enumerated Values:
1unassigned
2assigned
 .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1.4
zxAnGponSrvBpRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.6.1.50

zxAnGponSrvBpMapConfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvBpMapConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvBpMapConfTable' 
Table of the VPort map, it is used valid the 
'zxAnGponSrvBpMapType' is not 'oneToOne'.
zxAnGponSrvBpMapConfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.7.1
Entry of the VPort map. The index 'zxAnPonOnuIndex' represents
the normal ONU index or the virtual ONU index for profile.
Indexes
Column Syntax OID
zxAnGponSrvBpMapConfCos
A CoS value(0..7) referenced by a GEM port mapped to a VPort.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.3902.1082.500.10.2.3.7.1.1
zxAnGponSrvBpMapConfVid
A VLAN ID (1..4094|65535) referenced by a GEM port mapped to a
VPort. The value 65535 indicates the untagged frames.
When VPort maptype is oneToOne or cos, this index is 0.
Integer32
Constraints:
range: 65535-65535
range: 0-4094
 .1.3.6.1.4.1.3902.1082.500.10.2.3.7.1.2
zxAnGponSrvBpMapConfRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:

To create a row in this table, a manager must
set this object to createAndGo(4).
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.7.1.50

zxAnGponSrvOnuStatusTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.8 · 1 row entry · 12 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuStatusTable' 
Table of ONU status.
zxAnGponSrvOnuStatusEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1
Entry of ONU status.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponSrvOnuAdminStatus
When status is disabled, no configuration is allowed on this ONU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.1
zxAnGponSrvOnuOmccStatus
omccReady : The OMCC will be ready after ONU is registered on OLT.
deactive : The OMCC will be deactivated after ONU is registered
on OLT.
Enumeration
Enumerated Values:
1omccReady
2deactive
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.2
zxAnGponSrvOnuO1O7Status
The O1-O7 status of the ONU.
unknown: The state is unknown.

initial: The ONU powers up in this state.

standby: Downstream traffic is received by the ONU.
The ONU waits for global …
Enumeration
Enumerated Values:
1unknown
2initial
3standby
4powerSetup
5serialNumber
6ranging
7operation
8popup
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.3
zxAnGponSrvOnuPhaseStatus
logging : ONU is registering on the OLT.
los : Loss of Signal.
syncMib : ONU is on MIB Synchronization process.
working : ONU is working.
dyinGasp : ONU is dying gasp.
authFailed : ONU is authenticate failed.
offline : …
Enumeration
Enumerated Values:
1logging
2los
3syncMib
4working
5dyingGasp
6authFailed
7offline
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.4
zxAnGponSrvOnuLastOnlineTime
ONU last online time. The format is yyyy-mm-dd HH:MM:SS.
For example,2010-12-30 13:06:30.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.5
zxAnGponSrvOnuLastOfflineTime
ONU last offline time. The format is yyyy-mm-dd HH:MM:SS.
For example,2010-12-30 13:06:30.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.6
zxAnGponSrvOnuLastOfflineReason
ONU last offine reason.
1 : unknown reason
2 : OLT LOS
3 : ONU LOS
4 : ONU LOF
5 : ONU SF
6 : ONU LOA
7 : ONU LOAM
8 : ONU authorization failed
9 : ONU power off
10 : ONU deactivation succeed
11 : ONU deactivation…
Enumeration
Enumerated Values:
1unknown
2los
3losi
4lofi
5sfi
6loai
7loami
8authFail
9dyingGasp
10deactiveSucc
11deactiveFail
12reboot
13shutdown
14unauthorized
15snDisabledOrLaserTxOff
16rogueDyingGasp
17ploamPacketsFrequently
18omciPacketsFrequently
19oltTroubleshooting
20onuTroubleshooting
21rxOpticalPowerAbnormal
22adminDisabled
23factoryReset
24onuHardReset
25onuSoftReset
26oltPonMacReset
27authInfoChanged
28invalidLicense
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.7
zxAnGponSrvOnuMcastEncryptStatus
It indicates the configuration of encryption key is
successful or failed.
success(1) : configuration of encryption key is successful
failure(2) : configuration of encryption key is failed
Enumeration
Enumerated Values:
1success
2failure
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.8
zxAnGponSrvOnuConfStatus
It indicates the configured status of ONU is
succeeded or failed.
succeeded(1) : no configured error occured during configuring ONU
failed(2) : configured error occured during configuring ONU.
Enumeration
Enumerated Values:
1succeeded
2failed
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.9
zxAnGponSrvOnuFecEnableStatus
It indicates the ONU FEC function enabling status.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.10
zxAnGponSrvOnuChannelId
It indicates the ONU channel ID.
The value 0 indicates the ONU channel ID is unknown.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.11
zxAnGponSrvOnuSpeedMode
It indicates the ONU speed mode.
gpon(1): GPON,
xgpon(2): XG-PON,
xgspon(3): XGS-PON,
unknown(255): unknown.
Enumeration
Enumerated Values:
1gpon
2xgpon
3xgspon
255unknown
 .1.3.6.1.4.1.3902.1082.500.10.2.3.8.1.12

zxAnGponSrvOnuOperTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.9 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuOperTable' 
Table of ONU command operation.
zxAnGponSrvOnuOperEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.9.1
Entry of ONU command operation.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponSrvOnuActivateAction
The activation of the ONU.
Enumerationr/w
Enumerated Values:
1deactivate
2activate
 .1.3.6.1.4.1.3902.1082.500.10.2.3.9.1.1
zxAnGponSrvOnuUpdateSnAction
Update(Release) the binding of ONU's password and SN when the
registration mode is 'regModePwd' with SN bound.
Enumerationr/w
Enumerated Values:
1updateSn
 .1.3.6.1.4.1.3902.1082.500.10.2.3.9.1.2

zxAnGponSrvOnuDistanceTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.10 · 1 row entry · 2 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvOnuDistanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvOnuDistanceTable' 
This table represents ONU distance.
zxAnGponSrvOnuDistanceEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.10.1
It is entry in the zxAnGponSrvOnuDistanceTable.
The index 'zxAnPonOnuIndex' represents the normal ONU index.
Indexes
Column Syntax OID
zxAnGponSrvOnuEqd
The Equalization delay is an internal delay in the ONU,
set and controlled by the OLT. The purpose of this parameter
is to delay the upstream transmission so it arrives at the OLT
at the correct phase.
bitSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.10.1.1
zxAnGponSrvOnuFiberLen
Length of the fiber between OLT and ONU.
MeterSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.10.1.2

zxAnGponSrvGemPortCurrPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.11.2 · 1 row entry · 17 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvGemPortCurrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvGemPortCurrPerfTable' 
The GPON GEM port current performance data table
zxAnGponSrvGemPortCurrPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1
An entry in the GEM port current performance data table.
Indexes
Column Syntax OID
zxAnGponGemPortRxOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.1
zxAnGponGemPortRxUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast
or broadcast address at this sub-layer. This object is a
64-bit version of ifInUcastPkts
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.2
zxAnGponGemPortRxBcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast
address at this sub-layer.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.3
zxAnGponGemPortRxMcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast
address at this sub-layer. For a MAC layer protocol, this
includes both Group and Functional addresses.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.4
zxAnGponGemPortRxDiscardPkts
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet co…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.5
zxAnGponGemPortTxOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.6
zxAnGponGemPortTxUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a
multicast or broadcast address at this sub-layer, including
those that were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.7
zxAnGponGemPortTxBcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that
were discarded or not sent.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.8
zxAnGponGemPortTxMcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that
were discarded or not sent. For a MAC layer prot…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.9
zxAnGponGemPortTxDiscardPkts
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer s…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.10
zxAnGponGemPortRxOctetRate
Received bytes per second.
BpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.11
zxAnGponGemPortRxOctetPeakRate
Peak rate of received octets.
BpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.12
zxAnGponGemPortTxOctetRate
Transmitted rate of octets.
BpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.13
zxAnGponGemPortTxOctetPeakRate
Peak rate of transmitted octets.
BpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.14
zxAnGponGemPortPerfCapability
The attribute indicates that the supports of GPON GEM port
performance, each bit from left to right represents the support
of performance statistic from top to bottom in this MIB table,
value 1 represents support and …
Bits
Enumerated Values:
0zxAnGponGemPortRxOctets
1zxAnGponGemPortRxUcastPkts
2zxAnGponGemPortRxBcastPkts
3zxAnGponGemPortRxMcastPkts
4zxAnGponGemPortRxDiscardPkts
5zxAnGponGemPortTxOctets
6zxAnGponGemPortTxUcastPkts
7zxAnGponGemPortTxBcastPkts
8zxAnGponGemPortTxMcastPkts
9zxAnGponGemPortTxDiscardPkts
10zxAnGponGemPortRxOctetRate
11zxAnGponGemPortRxOctetPeakRate
12zxAnGponGemPortTxOctetRate
13zxAnGponGemPortTxOctetPeakRate
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.99
zxAnGponGemPortCurrReset
Clear all the current performance variables.
To query this object, always return 1.
Enumerationr/w
Enumerated Values:
1perfReset
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.100
zxAnGponGemPortCurrRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.11.2.1.101

zxAnGponSrvVportCurrPerfTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.12.2 · 1 row entry · 1 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvVportCurrPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvVportCurrPerfTable' 
Enable/disable the GPON VPort interface statistics.
zxAnGponSrvVportCurrPerfEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.12.2.1
An entry in the GPON VPort interface statistics table.
Indexes
Column Syntax OID
zxAnGponVportCurrRowStatus
The status of this conceptual row.

The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.

To create a row in this table, a manager must
set this object to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.12.2.1.101

zxAnGponSrvCardOnuAuthModeTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.21.2 · 1 row entry · 4 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponSrvCardOnuAuthModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponSrvCardOnuAuthModeTable' 
GPON card ONU authentication mode table.
zxAnGponSrvCardOnuAuthModeEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.21.2.1
GPON card ONU authentication mode entry.
Indexes
Column Syntax OID
zxAnGponSrvRack
The rack number of GPON card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.21.2.1.1
zxAnGponSrvShelf
The shelf number of GPON card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.21.2.1.2
zxAnGponSrvSlot
The slot number of GPON card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1082.500.10.2.3.21.2.1.3
zxAnGponSrvCardOnuAuthMode
GPON card ONU authentication mode.
When the value is hybrid(1) then each ONU authentication mode
under this GPON card will be permitted for any ONU authentication
mode. When the value is sn(2) then each ONU authenticati…
Enumerationr/w
Enumerated Values:
1hybrid
2sn
 .1.3.6.1.4.1.3902.1082.500.10.2.3.21.2.1.4

zxAnGponOnuPrfTcontBwTable

table
.1.3.6.1.4.1.3902.1082.500.10.2.3.22 · 1 row entry · 3 columns
Open in standard view
Uses the zte-ng variant from /opt/observium/mibs/zte-ng.
Command help
Walk zxAnGponOnuPrfTcontBwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-GPON-SERVICE-MIB' -M '/opt/observium/mibs/zte-ng:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-GPON-SERVICE-MIB::zxAnGponOnuPrfTcontBwTable' 
The ONU profile T-CONT bandwidth table.
The object zxAnGponOnuPrfTcontBwPrfName takes effect only when the
ONU is configured with a line profile and the
zxAnGponOPTcontBwPrfName in the line profile is configured as
'none'. 'none' is a special default profile in the
zxAnGponSrvBandwidthPrfTable, which means the T-CONT
bandwidth profile isn't provided.
zxAnGponOnuPrfTcontBwEntry row .1.3.6.1.4.1.3902.1082.500.10.2.3.22.1
The ONU profile T-CONT bandwidth entry.
Indexes
Column Syntax OID
zxAnGponOnuPrfTcontIndex
An arbitrary(unique) integer for identifying an entry
in the table, from 1 to upper limit supported T-CONT count of
ONU type.
ZTE-AN-PON-TC-MIBZxAnGponOnuTcontIndex
Description:
ZxAnGponOnuTcontIndex reprensents the index of T-CONT in ONU,
from 1 to upper limit supported T-CONT count of ONU type.
 .1.3.6.1.4.1.3902.1082.500.10.2.3.22.1.1
zxAnGponOnuPrfTcontBwPrfName
The T-CONT bandwidth profile name.
This object takes effect only when the ONU is bound with a line
profile and the T-CONT is not configured with a bandwidth profile
in the line profile.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 1-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.3902.1082.500.10.2.3.22.1.2
zxAnGponOnuPrfTcontBwRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to createAndGo(4).

To delete a row in this table, a manager must
set this object to destroy(…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1082.500.10.2.3.22.1.50