ZHNVOICE Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
145

voiceServiceTable

table
.1.3.6.1.4.1.5504.2.5.40.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceServiceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceServiceTable' 
Table of voice services, including voice profiles, capabilities, and
physical interfaces
voiceServiceEntry row .1.3.6.1.4.1.5504.2.5.40.1.1.1
Table of voice services including voice profiles, capabilities, and
physical interfaces
Indexes
Column Syntax OID
voiceProfileNumberOfEntries
Voice Service Index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.1.1.1
voiceBoundIfName
Name of the network interface that the voice service should
run on. For example, brvlan300.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.1.1.2
voiceBoundIpAddr
IP address of the network interface that the bound interface is
configured for.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.5504.2.5.40.1.1.1.3
voiceServiceIndex
Voice Service Index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.1.1.4

capabilitiesTable

table
.1.3.6.1.4.1.5504.2.5.40.1.2.1 · 1 row entry · 21 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk capabilitiesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::capabilitiesTable' 
Table of voice service capabilities
capabilitiesEntry row .1.3.6.1.4.1.5504.2.5.40.1.2.1.1
Table of voice service capabilities
Indexes
Column Syntax OID
maxProfileCount
Maximum total number of distinct voice profiles supported.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.1
maxLineCount
Maximum total number of lines supported across all profiles.
This parameter is applicable only for a VoIP endpoint.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.2
maxSessionsPerLine
Maximum number of voice sessions supported for any given line
across all profiles. A value greater than one indicates support
for CPE provided conference calling. This parameter is applicable
only for a VoIP endpoint.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.3
maxSessionCount
Maximum total number of voice sessions supported across all lines
and profiles. This might differ from MaxLineCount if each line can
support more than one session for CPE provided conference calling.
This value MAY b…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.4
signalingProtocols
Comma-separated list of signaling protocols supported. Each item
is an enumeration of:

SIP
MGCP
MGCP-NCS
H.248
H.323

Each entry MAY be appended with a version indicator in the for…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.5
regions
Comma-separated list of geographic regions supported by the CPE.
Each item in the list MUST be an alpha-2 (two-character alphabetic)
country code as specified by ISO 3166. An empty list indicates that
the CPE does no…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.6
rtcp
Support for RTCP. A true value indicates support for the object
VoiceService.{i}.VoiceProfile.{i}.RTP.RTCP. This parameter is
applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.7
srtp
Support for SRTP. A true value indicates support for the object
VoiceService.{i}.VoiceProfile.{i}.RTP.SRTP. This parameter is applicable
only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.8
rtpRedundancy
Support for RTP payload redundancy as defined in RFC 2198. A true
value indicates support for VoiceService.{i}.VoiceProfile.{i}.RTP.Redundancy.
This parameter is applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.9
dscpCoupled
A true value indicates that the CPE is constrained such that transmitted
call control packets use the same DSCP marking as transmitted RTP packets.
If the value is true, the CPE MUST NOT support the DSCPMark parameter…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.10
ethernetTaggingCoupled
A true value indicates that the CPE is constrained such that transmitted
call control packets use the same Ethernet tagging (VLAN ID Ethernet Priority)
as transmitted RTP packets. If the value is true, the CPE MUST NO…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.11
pstnSoftSwitchOver
A true value indicates the CPE is capable of supporting the PSO_Activate
Facility Action, which allows a call to be switched to a PSTN FXO (Foreign
eXchange Office) line. This parameter is applicable only for a VoIP e…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.12
faxT38
Support for T.38 fax. A true value indicates support for the object
VoiceService.{i}.VoiceProfile.{i}.FaxT38. This parameter is applicable only
for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.13
faxPassThrough
Support for fax pass-through. A true value indicates support for the
parameter VoiceService.{i}.VoiceProfile.{i}.FaxPassThrough. This parameter
is applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.14
modemPassThrough
Support for modem pass-through. A true value indicates support for the
parameter VoiceService.{i}.VoiceProfile.{i}.ModemPassThrough. This parameter
is applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.15
toneGeneration
Support for tone generation. A true value indicates support for the object
VoiceService.{i}.VoiceProfile.{i}.Tone. A true value also indicates that the
ToneDescriptionsEditable, PatternBasedToneGeneration, and FileBas…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.16
ringGeneration
Support for ring generation. A true value indicates support for control of
ring generation via the VoiceService.{i}.VoiceProfile.{i}.Line.{i}.Ringer
object. A true value also indicates that the RingDescriptionsEditabl…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.17
digitMapCapabilities
Support for a configurable digit map string. A true value indicates full
support for the VoiceService.{i}.VoiceProfile.{i}.DigitMap parameter.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.18
numberingPlan
Support for a configurable numbering plan. A true value indicates support
for a configurable numbering plan via the VoiceService.{i}.VoiceProfile.{i}.
NumberingPlan object. This parameter is applicable only for a VoIP …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.19
buttonMap
Support for a configurable button map. A true value indicates support for
a configurable button map via the VoiceService.{i}.VoiceProfile.{i}.ButtonMap
NumberingPlan object. This parameter is applicable only for a VoI…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.20
voicePortTests
Support for remotely accessible voice-port tests. A true value indicates
support for the VoiceService.{i}.PhyInterface.{i}.Tests object. This parameter
is applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.1.1.21

capabilitiesSIPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk capabilitiesSIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::capabilitiesSIPTable' 
Table of SIP-specific capabilities. Applicable only if SIP is among the list of supported 
protocols.
capabilitiesSIPEntry row .1.3.6.1.4.1.5504.2.5.40.1.2.2.1
Table of SIP-specific capabilities. Applicable only if SIP is among the list of supported
protocols.
Indexes
Column Syntax OID
role
The role of this VoIP CPE. Enumeration of:

UserAgent
BackToBackUserAgents
OutboundProxy.

A single VoiceService instance MUST have only one role. If a device
includes the capabilities for …
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.1
extensionsSIP
Comma-separated list of SIP extension methods supported. SIP extension methods
MUST be in the form of the method name in upper case. The list MAY include
vendor-specific extensions, which MUST use the format defined i…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.2
transports
Comma-separated list of SIP transport protocols supported. Each entry is an
enumeration of:

UDP
TCP
TLS
SCTP

The list MAY include vendor-specific transports, which MUST use…
OctetString
Constraints:
range: 0-47
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.3
uriSchemes
Comma-separated list of URI schemes supported beyond the URI schemes
required by the SIP specification. Each URI scheme is given by the
URI prefix, without the colon separator.

Example: tel, fax
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.4
eventSubscription
Support for SIP event subscription. A true value indicates support for
the VoiceService.{i}.VoiceProfile.{i}.SIP.EventSubscribe and
VoiceService.{i}.VoiceProfile.{i}.Line.{i}.SIP.EventSubscribe.{i} objects.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.5
responseMap
Support for SIP response map. A true value indicates support for the
VoiceService.{i}.VoiceProfile.{i}.SIP.ResponseMap object. This parameter
is applicable only for a VoIP endpoint.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.6
tlsKeyExchangeProtocols
Comma-separated list of authentication protocols supported for TLS transport.
Each item listed is an enumeration of:
RSA
DSS

The list MAY include vendor-specific protocols, which MUST use the forma…
OctetString
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.2.2.1.7

capabilitiesMGCPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.2.3 · 1 row entry · 1 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk capabilitiesMGCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::capabilitiesMGCPTable' 
Table of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported 
protocols.
capabilitiesMGCPEntry row .1.3.6.1.4.1.5504.2.5.40.1.2.3.1
Table of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported
protocols.
Indexes
Column Syntax OID
extensionsMGCP
Comma-separated list of MGCP extension methods supported. MGCP extension methods
MUST be in the form of the method name in upper case. The list MAY include
vendor-specific extensions, which MUST use the format defined…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.2.3.1.1

capabilitiesCodecsTable

table
.1.3.6.1.4.1.5504.2.5.40.1.2.4 · 1 row entry · 6 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk capabilitiesCodecsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::capabilitiesCodecsTable' 
Table to describe the set of supported codecs. Each entry refers to a 
distinct combination of codec and bit rate. The table MUST include a 
distinct entry for each supported combination of these parameters. 
Applicable only for a VoIP endpoint.
capabilitiesCodecsEntry row .1.3.6.1.4.1.5504.2.5.40.1.2.4.1
The Codecs Service table MUST include a distinct entry for each
supported combination of these parameters.
Indexes
Column Syntax OID
codecIndex
Codecs table index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.1
entryID
Codecs table index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.2
codec
Identifier of the type of codec. Enumeration of:
G.711MuLaw
G.711ALaw
G.726
G.729
G.729a
G.729e
G.728
G.723.1
G.722
G.722.1
G.722.2
GSM-FR
GSM-HR
GSM-EFR
iLBC

The parameter MAY instead be a vendor-specif…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.3
bitRate
Bit rate, in bits per second. The value MUST be among the values
appropriate for the specified codec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.4
packetizationPeriod
Comma-separate list of supported packetization periods, in milliseconds,
or continuous ranges of packetization periods. Ranges are indicated as a
hyphen-separated pair of unsigned integers. Examples:
20 indicates…
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.5
silenceSuppression
Indicates support for silence suppression for this codec.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.2.4.1.6

voiceProfileTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.1 · 1 row entry · 21 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileTable' 
Table of voice profile objects
voiceProfileEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.1.1
Object associated with a collection of voice lines with common characteristics.
By default, a single VoiceProfile object SHOULD be present in a VoiceService, initially
in the disabled state.
Indexes
Column Syntax OID
voiceProfileIndex
Voice Profile Index
Unsigned32
Constraints:
range: 0-20
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.1
voiceProfileEnable
Enables or disables all lines in this profile, or places it into
a quiescent state. Enumeration of:
Disabled
Quiescent
Enabled
On creation, a profile MUST be in the Disabled state. In the Quiescent
state, in-prog…
VoiceProfileLineStateTyper/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.2
voiceProfileReset
When written as true, forces the all lines in this profile to be reset,
causing it to re-initialize and perform all start-up actions such as
registration. Always False when read.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.3
voiceProfileNumberOfLines
Number of instances of Line within this VoiceProfile. Applicable only
for a VoIP endpoint.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.4
voiceProfileName
Human-readable string to identify the profile instance.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.5
voiceProfileSignalingProtocol
The protocol to be used for this profile. A single protocol selected
from among the available protocols indicated in
VoiceService.{i}.Capabilities.SignalingProtocols.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.6
voiceProfileMaxSessions
Limit on the number of simultaneous voice sessions across all lines in this
profile. Must be less than or equal to VoiceService.{i}.Capabilities.MaxSessionCount.
(This MAY be greater than the number of lines if each li…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.7
voiceProfileDtmfMethod
Method by which DTMF digits MUST be passed. Enumeration of:
InBand
RFC2833
SIPInfo
If the parameter dtmfMethodG711 is non-empty, then this parameter applies
only when the current codec is not G.711. The value SIPInfo …
DTMFMethodValuesr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.8
voiceProfileDtmfMethodG711
Method by which DTMF digits MUST be passed if the current codec is G.711.
Enumeration of:
InBand
RFC2833
SIPInfo
An empty value for this parameter indicates that the value of the dtmfMethod
parameter is to appl…
DTMFMethodValuesr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.9
voiceProfileHookFlashMethod
This object specifies which hookflash relay method to use. A value of None
implies hook flash will be handled locally. A value of SIPInfo implies the
hook flash will be sent via the SIP info.
HookFlashMethodValuesr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.10
voiceProfileRegion
The geographic region associated with this profile. This MAY be used by
the CPE to customize localization settings. The value MUST be either one
value selected from among the available regions indicated in
VoiceServi…
RegionValuesr/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.11
voiceProfileDigitMap
Digit map controlling the transmission of dialed digit information. The
string defines the criteria to be met as digits are collected before an
outgoing request (e.g., a SIP INVITE) can be initiated. The syntax of thi…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.12
voiceProfileDigitMapEnable
Enables the use of the DigitMap parameter in this object. When enabled,
the content of the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object,
if present, MUST be ignored.

This parameter is require…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.13
voiceProfileStunEnable
Enable or disable use of STUN to allow operation through NAT. Note:
enabling STUN is to be interpreted as enabling the use of STUN for
discovery, not use as a keep-alive mechanism.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.14
voiceProfileStunServer
Domain name or IP address of the STUN server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.15
voiceProfileStunServerPort
STUN server port number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.16
voiceProfileLogServer
Domain name or IP address of the Log server.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.17
voiceProfileLogServerPort
Log server port number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.18
voiceProfileSpNum
Service Provider number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.19
voiceProfileV18Support
Enable or disable v18 support.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.20
voiceProfileSwitchType
Configure the VoIP Switch Type. Enumeration of:
broadSoft(1),
cirpack(2),
genband(3),
metaSwitch(4),
nortel(5),
networkOnly(6),
taqua(7),
softX3000(8),
axtelCS2K(9),
copperCom(10),
openSer(11),
utStarCom(12),
ericsson(1…
VoiceProfileSwitchTypesr/w
Type Values:
1broadSoft
2cirpack
3genband
4metaSwitch
5nortel
6networkOnly
7taqua
8softX3000
9axtelCS2K
10copperCom
11openSer
12utStarCom
13ericsson
99unknown
 .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.21

voiceProfileServiceProviderTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.2 · 1 row entry · 1 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileServiceProviderTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileServiceProviderTable' 
Table of voice profile service provider objects
voiceProfileServiceProviderEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.2.1
Service provider objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileServiceProviderName
Human-readable string identifying the service provider.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.2.1.1

voiceProfileSIPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.3 · 1 row entry · 25 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileSIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileSIPTable' 
Table of SIP objects for a specific voice profile
voiceProfileSIPEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.3.1
SIP objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileSIPProxyServer
Host name or IP address of the SIP proxy server. All SIP signaling
traffic MUST be sent to the host indicated by this parameter and the
port indicated by the ProxyServerPort parameter unless OutboundProxy
is non-empt…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.1
voiceProfileSIPProxyServerPort
Destination port to be used in connecting to the SIP server.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.2
voiceProfileSIPProxyServerTransport
Transport protocol to be used in connecting to the SIP server.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transports.
Enumeration of:
UDP
TCP
TLS
…
VoiceTransportValuesr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.3
voiceProfileSIPRegistrarServer
Host name or IP address of the SIP registrar server. If this parameter
is empty, the CPE MUST obtain all of the registrar server configuration
information, including host name or IP address, port, and transport
protoco…
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.4
voiceProfileSIPRegistrarServerPort
Destination port to be used in connecting to the SIP registrar server.
If the RegistrarServer parameter is empty, the CPE MUST obtain all
of the registrar server configuration information, including host name
or IP ad…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.5
voiceProfileSIPRegistrarServerTransport
Transport protocol to be used in connecting to the registrar server.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transports.
Enumeration of:
UDP
TCP
TLS…
VoiceTransportValuesr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.6
voiceProfileSIPToTagMatching
Enable/Disable SIP to tag matching.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.7
voiceProfileSIPMusicServer
Music server address.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.8
voiceProfileSIPMusicServerPort
Music server port number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.9
voiceProfileSIPPlarGateway
PLAR gateway address.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.10
voiceProfileSIPPlarPort
Plar gateway port number.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.11
voiceProfileSIPUserAgentDomain
CPE domain string. If empty, the CPE SHOULD se its IP address as
the domain.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.12
voiceProfileSIPUserAgentPort
Port used for incoming call control signaling.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.13
voiceProfileSIPUserAgentTransport
Transport protocol to be used for incoming call control signaling.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transports.
Enumeration of:
UDP
TCP
TLS
S…
VoiceTransportValuesr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.14
voiceProfileSIPOutboundProxy
Host name or IP address of the outbound proxy. If a non-empty value
is specified, the SIP endpoint MUST send all SIP traffic (requests
and responses) to the host indicated by this parameter and the port
indicated by …
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.15
voiceProfileSIPOutboundProxyPort
Destination port to be used in connecting to the outbound proxy.
This parameter MUST be ignored unless the value of the OutboundProxy
parameter in this object is non-empty.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.16
voiceProfileSIPOrganization
Text string to be used in the Organization header.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.17
voiceProfileSIPRegistrationPeriod
Period over which the user agent must periodically register,
in seconds.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.18
voiceProfileSIPRegisterExpires
Register request Expires header value, in seconds.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.19
voiceProfileSIPRegisterRetryInterval
Register retry interval, in seconds.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.20
voiceProfileSIPDSCPMark
Diffserv code point to be used for outgoing SIP signaling packets.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.21
voiceProfileSIPVLANIDMark
VLAN ID (as defined in 802.1Q) to be used for outgoing SIP signaling
packets for this profile. A value of -1 indicates the default value
is to be used. If either the VLANIDMark or EthernetPriorityMark are
greater than z…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.22
voiceProfileSIPEthernetPriorityMark
Ethernet priority code (as defined in 802.1D) to be used for
outgoing SIP signaling packets for this profile. A value of -1
indicates the default value is to be used. If either the VLANIDMark
or EthernetPriorityMark a…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.23
voiceProfileSIPInterdigitTimeout
Interdigit timeout, in milliseconds. This the value that will be used
for T in the dial string. Four Seconds is the default value before the
dial string is considered complete. Fifteen seconds is the maximum.
Unsigned32r/w
Constraints:
range: 0-15000
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.24
voiceProfileSIPAddressMode
Configure the SIP Client Name addressing mode. An enumeration of:
ip(1)
ipBracketed(2)
domainName(3)
Ip and IpBracketed will cause the SIP Client name to be the
Bound Interface IP address. Name will allow the user to i…
VoiceProfileAddressModesr/w
Type Values:
1ip
2ipBracketed
3domainName
 .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.25

voiceProfileSIPEventSubscribeTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.4 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileSIPEventSubscribeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileSIPEventSubscribeTable' 
Table of SIP subscriber event objects for a specific voice profile
voiceProfileSIPEventSubscribeEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.4.1
SIP subscriber events objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileSIPEventSubscribeEvent
SIP event name to appear in the EVENT header of the SIP SUBSCRIBE
request.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.1
voiceProfileSIPEventSubscribeNotifier
Host name or IP address of the event notify server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.2
voiceProfileSIPEventSubscribeNotifierPort
Destination port to be used in connecting to the event notifier.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.3
voiceProfileSIPEventSubscribeNotifierTransport
Transport protocol to be used in connecting to the registrar server.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transports.
Enumeration of:
UDP
TCP
TLS…
VoiceTransportValuesr/w
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.4.1.4

voiceProfileMGCPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.5 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileMGCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileMGCPTable' 
Table of MGCP objects for a specific voice profile
voiceProfileMGCPEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.5.1
MGCP objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileMGCPCallAgent1
Host name or IP address of the main MGCP call agent.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.1
voiceProfileMGCPUser
User string used in accessing the call agent.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.2
voiceProfilePersistentNotify
This field directs the MGCP stack to notify the switch for every
hd or hu event when in the RQNT is Q:LOOP.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.3
voiceProfileMGCPAddressMode
Configure the MGCP Client Name addressing mode. An enumeration of:
ip(1)
ipBracketed(2)
domainName(3)
Ip and IpBracketed will cause the MGCP Client name to be the
Bound Interface IP address. Name will allow the user to…
VoiceProfileAddressModesr/w
Type Values:
1ip
2ipBracketed
3domainName
 .1.3.6.1.4.1.5504.2.5.40.1.3.5.1.4

voiceProfileRTPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.6 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileRTPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileRTPTable' 
Table of RTP objects for a specific voice profile
voiceProfileRTPEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.6.1
RTP objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileRTPLocalPortMin
Base of port range to be used for incoming RTP streams for this profile.
Unsigned32r/w
Constraints:
range: 0-65525
 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.1
voiceProfileRTPLocalPortMax
Top of port range to be used for incoming RTP streams for this profile.
Unsigned32r/w
Constraints:
range: 0-65525
 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.2
voiceProfileRTPDSCPMark
Diffserv code point to be used for outgoing RTP &#10;packets for this
profile. It is RECOMMENDED that by default the DSCP for RTP traffic be
set to the value to indicate EF traffic.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.3
voiceProfileRTPTelephoneEventPayloadType
Payload type to be used for RTP telephone events. This parameter
indicates the payload type to be used for DTMF events if RFC 2833
transmission of DTMF information is in use.
Unsigned32r/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.5504.2.5.40.1.3.6.1.4

voiceProfileFaxT38Table

table
.1.3.6.1.4.1.5504.2.5.40.1.3.7 · 1 row entry · 3 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileFaxT38Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileFaxT38Table' 
Table of Fax T.38 objects for a specific voice profile
voiceProfileFaxT38Entry row .1.3.6.1.4.1.5504.2.5.40.1.3.7.1
Fax T38 objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileFaxT38Enable
Enable or disable the use of T.38.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.1
voiceProfileFaxT38BitRate
Maximum data rate for fax. Enumeration of the following values:
2400
4800
7200
9600
12000
14400
33600
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.2
voiceProfileFaxT38HighSpeedPacketRate
The rate at which high speed data will be sent across the network
in milliseconds. Enumeration of the following values:
10
20
30
40
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.7.1.3

voiceProfileLineTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.1 · 1 row entry · 9 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineTable' 
Table of voice profile line objects
voiceProfileLineEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1
Object associated with a distinct voice line. Support for adding and removing
lines is conditional on whether the CPE supports more than one line in total
as indicated by VoiceService.{i}.Capabilities.MaxLineCount. By…
Indexes
Column Syntax OID
voiceProfileLineIndex
Voice Profile Line Index
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.1
voiceProfileLineEnable
Enables or disables this line, or places it into a quiescent
state. Enumeration of:
Disabled
Quiescent
Enabled

On creation, a line MUST be in the Disabled state. In …
VoiceProfileLineStateTyper/w
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.2
voiceProfileLineDirectoryNumber
Directory number associated with this line. May be used to identify
the line to the user. In case of H.323 signaling, this MUST be an
E.164 number.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.3
voiceProfileLineStatus
Indicates the status of this line. Enumeration of:
Up
Initializing
Registering
Unregistering
Error
Testing
Quiescent
Disabled
VoiceLineStatusValues
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.4
voiceProfileLineCallState
Indicates the call state for this line. Enumeration of:
Idle
Calling
Ringing
Connecting
InCall
Hold
Disconnecting
VoiceLineCallStateValues
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.5
voiceProfileLinePhyReferenceList
A comma separated list of Physical Interface Identifiers that
this Line is associated with. Each item corresponds to the value
of the InterfaceID paraeter in a particular instance of the
VoiceService.{i}.PhyInterface.{…
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.6
voiceProfileLineCMAcntNum
Indicates the call manager account number associated with
this line instance.
Unsigned32r/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.7
voiceProfileLineOnhook
State of phones Receiver. On Hook if True, OffHook if False.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.8
voiceProfileLineRowStatus
The SNMP RowStatus of the current row.
Zhone-TCZhoneRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.9

voiceProfileLineSIPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.2 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineSIPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineSIPTable' 
Table of voice profile line SIP objects
voiceProfileLineSIPEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1
Line SIP objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileLineSIPAuthUserName
Username used to authenticate the connection to the server.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.1
voiceProfileLineSIPAuthPassword
Password used to authenticate the connection to the server. When read,
this parameter returns an empty string, regardless of the actual value.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.2
voiceProfileLineSIPURI
URI by which the user agent will identify itself for this line. If
empty, the actual URI used in the SIP signaling SHOULD be automatically
formed by the CPE as sip:UserName
OctetStringr/w
Constraints:
range: 0-389
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.3
voiceProfileLineSIPPlarUserName
PLAR gateway username.
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.4

voiceProfileLineMGCPTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.3 · 1 row entry · 1 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineMGCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineMGCPTable' 
Table of voice profile line MGCP objects
voiceProfileLineMGCPEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1
Line MGCP objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileLineMGCPLineName
Used to identify the line when using MGCP signaling. If empty, the CPE SHOULD
use the default names aaln/1, etc.
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1.1

voiceProfileLineProcessingTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.4 · 1 row entry · 4 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineProcessingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineProcessingTable' 
Table of voice profile line processing objects
voiceProfileLineProcessingEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1
Line Processing objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileLineTransmitGain
Gain in units of 0.1 dB to apply to the transmitted voice signal
prior to encoding. This gain is a modifier of the default transmit-gain,
which is unspecified.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.1
voiceProfileLineReceiveGain
Gain in units of 0.1 dB to apply to the received voice signal
after decoding. This gain is a modifier of the default receive-gain,
which is unspecified.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.2
voiceProfileLineEchoCancellationEnable
Enable or disable echo cancellation for this line.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.3
voiceProfileLineEchoCancellationInUse
Indication of whether or not echo cancellation is currently in use for
this line.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.4

voiceProfileLineCodecTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.5 · 1 row entry · 8 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineCodecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineCodecTable' 
Table of voice profile CODEC objects, per line
voiceProfileLineCodecEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1
The Voice Line CODEC list MUST include a distinct entry for each
supported combination of these parameters.
Indexes
Column Syntax OID
voiceProfileLineCodecIndex
Unique identifier for each entry in this table. The value MUST
match that of the corresponding entry in the
VoiceService.{i}.Capabilities.Codecs table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.1
voiceProfileLineCodecEntryID
Unique identifier for each entry in this table. The value MUST
match that of the corresponding entry in the
VoiceService.{i}.Capabilities.Codecs table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.2
voiceProfileLineCodec
Identifier of the codec type. The value MUST match that of the
corresponding entry in the VoiceService.{i}.Capabilities.Codecs
table.
OctetString
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.3
voiceProfileLineCodecBitRate
Bit rate, in bits per second. The value MUST match that of the
corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.4
voiceProfileLineCodecPacketizationPeriod
Comma-separate list of supported packetization periods, in milliseconds,
or continuous ranges of packetization periods as defined in
VoiceService.{i}.Capabilities.Codecs.PacketizationPeriod. The set of
packetization …
OctetStringr/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.5
voiceProfileLineCodecSilenceSuppression
Indicates support for silence suppression for this codec. If silence
suppression is supported, it can be disabled for this codec/bit-rate
by setting this parameter to false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.6
voiceProfileLineCodecEnable
Enable or disable the use of this combination of codec parameters.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.7
voiceProfileLineCodecPriority
Indicates the priority for this combination of codec parameters, where
1 is the highest priority. Where the priority differs between entries in
this table, the CPE SHOULD use the highest priority (lowest numbered)
en…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.8

voiceProfileLineCallingFeaturesTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.6 · 1 row entry · 5 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineCallingFeaturesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineCallingFeaturesTable' 
Table of voice calling features, per line
voiceProfileLineCallingFeaturesEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1
The list of voice line calling features supported.
Indexes
Column Syntax OID
voiceProfileLineCallingFeatureCallerIDEnable
Enable or disable the transmission of caller ID information on
outgoing calls.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.1
voiceProfileLineCallingFeatureCallerIDName
String used to identify the caller.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.2
voiceProfileLineCallingFeatureCallWaitingEnable
Enable or disable call waiting in the endpoint.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.3
voiceProfileLineCallingFeatureMaxSessions
Indicates the maximum number of simultaneous sessions that may
be conferenced together by the endpoint. For example, to enable
three way conferencing, set the value of this object to 2. This
value SHOULD be less than …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.4
voiceProfileLineCallingFeatureMWIEnable
Enable or disable call waiting in the endpoint.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.5

voiceProfileLineStatsTable

table
.1.3.6.1.4.1.5504.2.5.40.1.3.8.7 · 1 row entry · 13 columns
Open in standard view
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk voiceProfileLineStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHNVOICE' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHNVOICE::voiceProfileLineStatsTable' 
Table of voice profile line statistics objects
voiceProfileLineStatsEntry row .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1
Line statistics objects associated with a specific voice profile.
Indexes
Column Syntax OID
voiceProfileLineStatsPacketsSent
Total number of RTP Packets sent for this voice line.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.1
voiceProfileLineStatsPacketsReceived
Total number of RTP Packets received for this voice line.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.2
voiceProfileLineStatsBytesSent
Total number of RTP Bytes sent for this voice line.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.3
voiceProfileLineStatsBytesReceived
Total number of RTP Bytes received for this voice line.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.4
voiceProfileLineStatsPacketsLost
Total number of RTP Packets lost for this voice line.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.5
voiceProfileLineStatsIncomingCallsReceived
Total incoming calls received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.6
voiceProfileLineStatsIncomingCallsAnswered
Total incoming calls answered.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.7
voiceProfileLineStatsIncomingCallsConnected
Total incoming calls connected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.8
voiceProfileLineStatsIncomingCallsFailed
Total incoming calls failed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.9
voiceProfileLineStatsOutgoingCallsAttempted
Total outgoing calls attempted.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.10
voiceProfileLineStatsOutgoingCallsAnswered
Total outgoing calls answered.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.11
voiceProfileLineStatsOutgoingCallsConnected
Total outgoing calls connected.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.12
voiceProfileLineStatsOutgoingCallsFailed
Total outgoing calls failed.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.13