voiceProfileDtmfMethod
ZHNVOICE ·
.1.3.6.1.4.1.5504.2.5.40.1.3.1.1.8
Object
column
r/w
DTMFMethodValues
Method by which DTMF digits MUST be passed. Enumeration of: InBand RFC2833 SIPInfo If the parameter dtmfMethodG711 is non-empty, then this parameter applies only when the current codec is not G.711. The value SIPInfo is applicable only if the SignalingProtocol is SIP. This parameter is applicable only for a VoIP endpoint.
Context
- MIB
- ZHNVOICE
- OID
.1.3.6.1.4.1.5504.2.5.40.1.3.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- voiceProfileEntry
- Table
- voiceProfileTable
- Siblings
- 20
Syntax
DTMFMethodValues
- Source
- DTMFMethodValues
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| voiceProfileIndex Voice Profile Index | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.1 |
| voiceProfileHookFlashMethod This object specifies which hookflash relay method to use. A value of None
implies hook flash will be handled locally. A value of SIPInfo implies the
hook flash will be sent via … | column | HookFlashMethodValues | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.10 |
| voiceProfileRegion The geographic region associated with this profile. This MAY be used by
the CPE to customize localization settings. The value MUST be either one
value selected from among the av… | column | RegionValues | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.11 |
| voiceProfileDigitMap Digit map controlling the transmission of dialed digit information. The
string defines the criteria to be met as digits are collected before an
outgoing request (e.g., a SIP INV… | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.12 |
| voiceProfileDigitMapEnable Enables the use of the DigitMap parameter in this object. When enabled,
the content of the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object,
if present, MUST be ignored.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.13 |
| voiceProfileStunEnable Enable or disable use of STUN to allow operation through NAT. Note:
enabling STUN is to be interpreted as enabling the use of STUN for
discovery, not use as a keep-alive mechani… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.14 |
| voiceProfileStunServer Domain name or IP address of the STUN server. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.15 |
| voiceProfileStunServerPort STUN server port number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.16 |
| voiceProfileLogServer Domain name or IP address of the Log server. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.17 |
| voiceProfileLogServerPort Log server port number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.18 |
| voiceProfileSpNum Service Provider number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.19 |
| voiceProfileEnable Enables or disables all lines in this profile, or places it into
a quiescent state. Enumeration of:
Disabled
Quiescent
Enabled
On creation, a profile MUST be in the Disabled… | column | VoiceProfileLineStateType | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.2 |
| voiceProfileV18Support Enable or disable v18 support. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.20 |
| voiceProfileSwitchType Configure the VoIP Switch Type. Enumeration of:
broadSoft(1),
cirpack(2),
genband(3),
metaSwitch(4),
nortel(5),
networkOnly(6),
taqua(7),
softX3000(8),
axtelCS2K(9),
copperCom(10)… | column | VoiceProfileSwitchTypes | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.21 |
| voiceProfileReset When written as true, forces the all lines in this profile to be reset,
causing it to re-initialize and perform all start-up actions such as
registration. Always False when read. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.3 |
| voiceProfileNumberOfLines Number of instances of Line within this VoiceProfile. Applicable only
for a VoIP endpoint. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.4 |
| voiceProfileName Human-readable string to identify the profile instance. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.5 |
| voiceProfileSignalingProtocol The protocol to be used for this profile. A single protocol selected
from among the available protocols indicated in
VoiceService.{i}.Capabilities.SignalingProtocols. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.6 |
| voiceProfileMaxSessions Limit on the number of simultaneous voice sessions across all lines in this
profile. Must be less than or equal to VoiceService.{i}.Capabilities.MaxSessionCount.
(This MAY be gre… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.7 |
| voiceProfileDtmfMethodG711 Method by which DTMF digits MUST be passed if the current codec is G.711.
Enumeration of:
InBand
RFC2833
SIPInfo
An empty value for this parameter indicates that the value … | column | DTMFMethodValues | .1.3.6.1.4.1.5504.2.5.40.1.3.1.1.9 |