voiceProfileSIPProxyServer
ZHNVOICE ·
.1.3.6.1.4.1.5504.2.5.40.1.3.3.1.1
Object
column
r/w
OctetString
Host name or IP address of the SIP proxy server. All SIP signaling traffic MUST be sent to the host indicated by this parameter and the port indicated by the ProxyServerPort parameter unless OutboundProxy is non-empty or a different route was discovered during normal operations SIP routing operation. Regardless of which host the traffic gets sent to (the ProxyServer or the OutboundProxy), the value of this parameter MUST be used to derive the URI placed into the SIP Route header field of all requests originated by this end-point unless a different proxy host was discovered dynamically during normal SIP routing operations.
Context
- MIB
- ZHNVOICE
- OID
.1.3.6.1.4.1.5504.2.5.40.1.3.3.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- voiceProfileSIPEntry
- Table
- voiceProfileSIPTable
- Siblings
- 24
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| voiceProfileSIPPlarGateway PLAR gateway address. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.10 |
| voiceProfileSIPPlarPort Plar gateway port number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.11 |
| voiceProfileSIPUserAgentDomain CPE domain string. If empty, the CPE SHOULD se its IP address as
the domain. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.12 |
| voiceProfileSIPUserAgentPort Port used for incoming call control signaling. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.13 |
| voiceProfileSIPUserAgentTransport Transport protocol to be used for incoming call control signaling.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transpor… | column | VoiceTransportValues | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.14 |
| voiceProfileSIPOutboundProxy Host name or IP address of the outbound proxy. If a non-empty value
is specified, the SIP endpoint MUST send all SIP traffic (requests
and responses) to the host indicated by th… | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.15 |
| voiceProfileSIPOutboundProxyPort Destination port to be used in connecting to the outbound proxy.
This parameter MUST be ignored unless the value of the OutboundProxy
parameter in this object is non-empty. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.16 |
| voiceProfileSIPOrganization Text string to be used in the Organization header. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.17 |
| voiceProfileSIPRegistrationPeriod Period over which the user agent must periodically register,
in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.18 |
| voiceProfileSIPRegisterExpires Register request Expires header value, in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.19 |
| voiceProfileSIPProxyServerPort Destination port to be used in connecting to the SIP server. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.2 |
| voiceProfileSIPRegisterRetryInterval Register retry interval, in seconds. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.20 |
| voiceProfileSIPDSCPMark Diffserv code point to be used for outgoing SIP signaling packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.21 |
| voiceProfileSIPVLANIDMark VLAN ID (as defined in 802.1Q) to be used for outgoing SIP signaling
packets for this profile. A value of -1 indicates the default value
is to be used. If either the VLANIDMark or… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.22 |
| voiceProfileSIPEthernetPriorityMark Ethernet priority code (as defined in 802.1D) to be used for
outgoing SIP signaling packets for this profile. A value of -1
indicates the default value is to be used. If either … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.23 |
| voiceProfileSIPInterdigitTimeout Interdigit timeout, in milliseconds. This the value that will be used
for T in the dial string. Four Seconds is the default value before the
dial string is considered complete. … | column | Unsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.24 |
| voiceProfileSIPAddressMode Configure the SIP Client Name addressing mode. An enumeration of:
ip(1)
ipBracketed(2)
domainName(3)
Ip and IpBracketed will cause the SIP Client name to be the
Bound Interface I… | column | VoiceProfileAddressModes | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.25 |
| voiceProfileSIPProxyServerTransport Transport protocol to be used in connecting to the SIP server.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transports.
En… | column | VoiceTransportValues | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.3 |
| voiceProfileSIPRegistrarServer Host name or IP address of the SIP registrar server. If this parameter
is empty, the CPE MUST obtain all of the registrar server configuration
information, including host name or… | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.4 |
| voiceProfileSIPRegistrarServerPort Destination port to be used in connecting to the SIP registrar server.
If the RegistrarServer parameter is empty, the CPE MUST obtain all
of the registrar server configuration in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.5 |
| voiceProfileSIPRegistrarServerTransport Transport protocol to be used in connecting to the registrar server.
Must be chosen from among the transports supported, as indicated by
VoiceService.{i}.Capabilities.SIP.Transpo… | column | VoiceTransportValues | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.6 |
| voiceProfileSIPToTagMatching Enable/Disable SIP to tag matching. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.7 |
| voiceProfileSIPMusicServer Music server address. | column | OctetString | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.8 |
| voiceProfileSIPMusicServerPort Music server port number. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.5504.2.5.40.1.3.3.1.9 |