TIMETRA-DOT3-OAM-MIB Table View

The tmnxDot3OamTable is used to store proprietary configuration
information on a particular Ethernet like interface (OAM entity) in
the system that supports the OAM functions defined in [802.3ah].

tmnxDot3OamEntry row .1.3.6.1.4.1.6527.3.1.2.42.1.1.1

An entry in the tmnxDot3OamTable containing configuration information
applicable to an OAM entity.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDot3OamLastChanged The value of tmnxDot3OamLastChanged indicates the sysUpTime value when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.1
tmnxDot3OamInterval The value of tmnxDot3OamInterval specifies the number of 100ms time intervals between each periodic OAMPDU transmit and receive. A lower value implies that OAMPDUs will be transmitted more frequently to the peer, and OA…	decisecondsUnsigned32r/w Constraints: range: 1-600	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.2
tmnxDot3OamMultiplier The value of tmnxDot3OamMultiplier specifies how many receive intervals may expire with no OAMPDU receive. After the configured number of intervals with OAMPDU receive have passed, the OAM negotiation process will rest…	Unsigned32r/w Constraints: range: 2-5	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.3
tmnxDot3OamTunneling The value of tmnxDot3OamTunneling specifies if OAMPDUs should be passed transparently through the OAM entity for processing by another OAM entity across the network, or if OAMPDUs should be terminated and processed at t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.4
tmnxDot3OamLooped The value of tmnxDot3OamLooped indicates if the OAM entity is receiving OAMPDUs that it transmitted. A value of 'true' indicates that the OAM entity is receiving it's own OAMPDUs while a value of 'false' indicates it i…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.5
tmnxDot3OamHoldTime The value of tmnxDot3OamHoldTime specifies the number of seconds the efm-oam protocol should wait after dot3OamOperStatus transitions from 'operational (9)' to a non-operational state before going back to the 'operation…	secondsUnsigned32r/w Constraints: range: 0-50	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.6
tmnxDot3OamIgnoreEfmState The value of tmnxDot3OamIgnoreEfmState specifies whether the efm-oam status (dot3OamOperStatus) on a port will affect the operational state of the port it is running on when efm-oam is enabled. If tmnxDot3OamIgnoreEfmS…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.7
tmnxDot3OamGraceTxEnabled The value of tmnxDot3OamGraceTxEnabled specifies whether the efm-oam entity on a port will transmit grace-period messages. When the value of tmnxDot3OamGraceTxEnabled is 'true (1)', and tmnxDot3OamDyingGa…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.8
tmnxDot3OamGraceTxState The value of tmnxDot3OamGraceTxState indicates whether or not the node is locally executing a grace period. A value of 'true' indicates that all peer timeouts are extended locally and an eligible EFM-OAM entity is trans…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.9
tmnxDot3OamPrRdiRxDyingGasp The value of tmnxDot3OamPrRdiRxDyingGasp specifies how the local port will be impacted when it receives an Information OAMPDU from the peer with the dying gasp flag set.	TmnxLocalPortActionr/w Type Values: 1 logOnly 2 outOfService	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.10
tmnxDot3OamPrRdiRxCriticalEvent The value of tmnxDot3OamPrRdiRxCriticalEvent specifies how the local port will be impacted when it receives an Information OAMPDU from the peer with the critical event flag set.	TmnxLocalPortActionr/w Type Values: 1 logOnly 2 outOfService	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.11
tmnxDot3OamPrRdiRxLinkFault The value of tmnxDot3OamPrRdiRxLinkFault specifies how the local port will be impacted when it receives an Information OAMPDU from the peer with the link fault flag set.	TmnxLocalPortActionr/w Type Values: 1 logOnly 2 outOfService	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.12
tmnxDot3OamPrRdiRxEventNotif The value of tmnxDot3OamPrRdiRxEventNotif specifies how the local port will be impacted when it receives an Event Notification OAMPDU from the peer. The Event TLVs contained in the Event Notification OAMPDU will be anal…	TmnxLocalPortActionr/w Type Values: 1 logOnly 2 outOfService	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.13
tmnxDot3OamDiscAdCapLinkMon The value of tmnxDot3OamDiscAdCapLinkMon specifies whether or not the link monitoring capabilities will be advertised to the OAM peer when tmnxDot3OamLinkMonEnabled is set to 'enabled (1)'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.14
tmnxDot3OamVendorOui The value of tmnxDot3OamVendorOui indicates the Organizationally Unique Identifier (OUI) which can be used to identify the vendor of the local EFM-OAM entity. This OUI is included in the Local Information TLV of every I…	DOT3-OAM-MIBEightOTwoOui Type Constraints: range: 3	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.15
tmnxDot3OamVendorInfo The value of tmnxDot3OamVendorInfo indicates the information that is included in the Vendor Information field of the Local Information TLV of every Information OAMPDU transmitted by the local EFM-OAM entity. The semanti…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.16
tmnxDot3OamGraceVendorOui The value of tmnxDot3OamGraceVendorOui specifies an additional vendor OUI which indicates support for the vendor specific EFM-OAM grace functionality which is invoked during soft reset activities. When th…	DOT3-OAM-MIBEightOTwoOuir/w Type Constraints: range: 3	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.17
tmnxDot3OamDyingGaspOnReset The value of tmnxDot3OamDyingGaspOnReset specifies whether the EFM-OAM entity will transmit dying gasp messages on the port when a reset condition occurs. Dying gasp messages are only transmitted if the v…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.18
tmnxDot3OamDyingGaspOnResetState The value of tmnxDot3OamDyingGaspOnResetState indicates whether or not the node is transmitting Information OAMPDUs to the peer with the dying-gasp flag set. Dying gasp messages are only transmitted if th…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.19
tmnxDot3OamTriggerFault The value of tmnxDot3OamTriggerFault specifies the type of fault which is triggered. If the value of tmnxDot3OamTriggerFault is set to a value other than 'none (1)', EFM-OAM will bring the port operationa…	Enumerationr/w Enumerated Values: 1 none 2 dyingGasp 3 criticalEvent	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.20
tmnxDot3OamSoftResetAction The value of tmnxDot3OamSoftResetAction indicates which functionality is executed when a soft reset is invoked. Values: none (1) - no messages are sent grace (2) - grace messages are sent…	Enumeration Enumerated Values: 1 none 2 grace 3 dyingGasp	.1.3.6.1.4.1.6527.3.1.2.42.1.1.1.21

The tmnxDot3OamLoopbackTable is used to store proprietary loopback
configuration information on a particular Ethernet like interface (OAM
entity) in the system that supports the OAM functions defined in
[802.3ah].

tmnxDot3OamLoopbackEntry row .1.3.6.1.4.1.6527.3.1.2.42.2.1.1

An entry in the tmnxDot3OamLoopbackTable containing configuration
information applicable to an OAM entity.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDot3OamLoopbackLastChanged The value of tmnxDot3OamLoopbackLastChanged indicates the sysUpTime value when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.42.2.1.1.1
tmnxDot3OamLoopbackLocalStatus The value of tmnxDot3OamLoopbackLocalStatus specifies the local loopback status of the OAM entity. This attribute allows the user to manually set the local OAM entity loopback mode overriding the 802.3ah protocol for l…	Enumerationr/w Enumerated Values: 1 noLoopback 2 localLoopback	.1.3.6.1.4.1.6527.3.1.2.42.2.1.1.2

The tmnxDot3OamPeerTable is used to store proprietary configuration
information on a particular Ethernet like interface (OAM entity) in
the system that supports the OAM functions defined in [802.3ah].

tmnxDot3OamPeerEntry row .1.3.6.1.4.1.6527.3.1.2.42.4.1

An entry in the tmnxDot3OamPeerTable containing configuration
information applicable to an OAM entity.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDot3OamPeerGraceRx The value of tmnxDot3OamPeerGraceRx indicates that the OAM entity is receiving 'grace-period' notifications through this peer.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.4.1.1

The tmnxDot3OamEventConfigTable contains the proprietary objects to
configure the Event Notifications for Ethernet OAM events. There is
one entry in the table for every entry in dot3OamTable that supports
OAM events (where dot3OamFunctionsSupported includes the eventSupport
bit set). The values in the table are maintained across changes to
dot3OamOperStatus.

tmnxDot3OamEventConfigEntry row .1.3.6.1.4.1.6527.3.1.2.42.5.2.1

A tmnxDot3OamEventConfigEntry is automatically created/deleted
whenever an entry in dot3OamEventConfigTable is created/deleted.

Event configuration controls when the local management entity sends
Event Noti…

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDot3OamEventCfgLastChanged The value of tmnxDot3OamEventCfgLastChanged indicates the sysUpTime value when this row was last modified.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.1
tmnxDot3OamLinkMonEnabled The value of tmnxDot3OamLinkMonEnabled specifies whether or not link monitoring is enabled on the port. When this object's value is set to 'enabled (1)', the eventSupport bit in dot3OamFunctionsSupported is set, otherwi…	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.2
tmnxDot3OamLocalSfActEventBurst The value of tmnxDot3OamLocalSfActEventBurst specifies the number of Event Notification OAMPDUs to send the OAM peer to notify when a local Signal Failure (SF) threshold crossing event occurs. This occurs when a locally…	Unsigned32r/w Constraints: range: 1-5	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.3
tmnxDot3OamLocalSfActPortAction The value of tmnxDot3OamLocalSfActPortAction specifies how the local port will be affected when a local Signal Failure (SF) threshold crossing event occurs. This occurs when a locally monitored error count is equal to o…	TmnxLocalPortActionr/w Type Values: 1 logOnly 2 outOfService	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.4
tmnxDot3OamErrFrmEnabled The value of tmnxDot3OamErrFrmEnabled specifies whether or not Errored Frame events are monitored on the port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.5
tmnxDot3OamErrFrmSdThreshold The value of tmnxDot3OamErrFrmSdThreshold specifies the Signal Degrade (SD) threshold for frame errors over a period of time. This object's value must be lower than the Signal Failure (SF) threshold, dot3OamErrFrameThre…	framesUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.6
tmnxDot3OamErrFrmPrdEnabled The value of tmnxDot3OamErrFrmPrdEnabled specifies whether or not Errored Frame Period events are monitored on the port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.7
tmnxDot3OamErrFrmPrdSdThreshold The value of tmnxDot3OamErrFrmPrdSdThreshold specifies the Signal Degrade (SD) threshold for errored frame period (frame errors over a number of received frames). This object's value must be lower than the Signal Failur…	framesUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.8
tmnxDot3OamErrFrmSecEnabled The value of tmnxDot3OamErrFrmSecEnabled specifies whether or not Errored Frame Seconds Summary events are monitored on the port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.9
tmnxDot3OamErrFrmSecSdThreshold The value of tmnxDot3OamErrFrmSecSdThreshold specifies the Signal Degrade (SD) threshold for errored frame seconds. This object's value must be lower than the Signal Failure (SF) threshold, dot3OamErrFramePeriodThreshol…	errored frame secondsUnsigned32r/w Constraints: range: 0-900	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.10
tmnxDot3OamErrSymPrdEnabled The value of tmnxDot3OamErrSymPrdEnabled specifies whether or not Errored Symbol Period events are monitored on the port.	TIMETRA-TC-MIBTmnxEnabledDisabledr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.11
tmnxDot3OamErrSymPrdSdThreshold The value of tmnxDot3OamErrSymPrdSdThreshold specifies the Signal Degrade (SD) threshold for symbol period errors. This object's value must be lower than the Signal Failure (SF) threshold, dot3OamErrFramePeriodThreshold…	symbolsUnsigned32r/w Constraints: range: 0-1000000	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.12
tmnxDot3OamErrSymPrdWindowTime The value of tmnxDot3OamErrSymPrdWindowTime specifies the window of time over which the threshold for symbol period errors is defined. This object's value must be specified in increments of 10.	decisecondsUnsigned32r/w Constraints: range: 10-600	.1.3.6.1.4.1.6527.3.1.2.42.5.2.1.13

The tmnxDot3OamEventLogTable contains additional information for the
entries in dot3OamEventLogTable.

tmnxDot3OamEventLogEntry row .1.3.6.1.4.1.6527.3.1.2.42.5.3.1

A tmnxDot3OamEventLogEntry is automatically created/deleted whenever
an entry in dot3OamEventLogTable is created/deleted.

Indexes

No indexes recorded

Column	Syntax	OID
tmnxDot3OamEventLogCleared The value of tmnxDot3OamEventLogCleared indicates whether or not this event has been cleared. If this object's value is set to 'true (1)', this is considered a historic event and is no longer a potential cause for the p…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.5.3.1.1

The tmnxDot3OamSdEventLogTable records a history of the Signal
Degraded (SD) threshold crossing events that have occurred at the
Ethernet OAM level. These events can include locally detected events
(which may result in locally generated OAMPDUs) and remotely detected
events (which are detected by the OAM peer entity and signaled to the
local entity via Ethernet OAM). Ethernet OAM events can be signaled by
Event Notification OAMPDUs or by the flags field in any OAMPDU.

tmnxDot3OamSdEventLogEntry row .1.3.6.1.4.1.6527.3.1.2.42.5.4.1

A tmnxDot3OamSdEventLogEntry is automatically created whenever SD
threshold crossing events occur at the local OAM entity, and when
Event Notification OAMPDUs are received at the local OAM entity
(indicating that events…

Indexes

IF-MIBifIndex tmnxDot3OamSdEventLogIndex

Column	Syntax	OID
tmnxDot3OamSdEventLogIndex The value of tmnxDot3OamSdEventLogIndex specifies an arbitrary integer for identifying individual SD threshold crossing events within the event log.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.1
tmnxDot3OamSdEventLogTimestamp The value of tmnxDot3OamSdEventLogTimestamp indicates the sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.2
tmnxDot3OamSdEventLogOui The value of tmnxDot3OamSdEventLogOui indicates the Organizationally Unique Identifier (OUI) of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizational…	DOT3-OAM-MIBEightOTwoOui Type Constraints: range: 3	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.3
tmnxDot3OamSdEventLogType The value of tmnxDot3OamSdEventLogType indicates the type of SD threshold crossing event. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFram…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.4
tmnxDot3OamSdEventLogLocation The value of tmnxDot3OamSdEventLogLocation indicates the location where the SD event occurred. Code point descriptions: local (1) - event occurred locally remote (2) - event received from the OAM…	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.5
tmnxDot3OamSdEventLogWindowHi The value of tmnxDot3OamSdEventLogWindowHi indicates the most significant four bytes of the unsigned 64-bit window over which the value was measured for the SD threshold crossing event. The window (in dec…	2^32 decisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.6
tmnxDot3OamSdEventLogWindowLo The value of tmnxDot3OamSdEventLogWindowLo indicates the least significant four bytes of the unsigned 64-bit window over which the value was measured for the SD threshold crossing event. The window (in de…	decisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.7
tmnxDot3OamSdEventLogThresholdHi The value of tmnxDot3OamSdEventLogThresholdHi indicates the most significant four bytes of the unsigned 64-bit threshold over which the value was measured for the SD threshold crossing event. The threshol…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.8
tmnxDot3OamSdEventLogThresholdLo The value of tmnxDot3OamSdEventLogThresholdLo indicates the least significant four bytes of the unsigned 64-bit threshold over which the value was measured for the SD threshold crossing event. The thresho…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.9
tmnxDot3OamSdEventLogValue The value of tmnxDot3OamSdEventLogValue indicates the value of the parameter within the given window that generated this event.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.10
tmnxDot3OamSdEventLogRunTotal The value of tmnxDot3OamSdEventLogRunTotal indicates the running total of the number of times this SD threshold crossing event has occurred since the last reset.	HCNUM-TCCounterBasedGauge64	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.11
tmnxDot3OamSdEventLogEventTotal The value of tmnxDot3OamSdEventLogEventTotal indicates the total number of times an Event Notification for this SD threshold crossing event has been transmitted.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.12
tmnxDot3OamSdEventLogCleared The value of tmnxDot3OamSdEventLogCleared indicates whether or not this SD threshold crossing event has been cleared. If this object's value is 'true (1)', this event is no longer a potential cause for the port to restr…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6527.3.1.2.42.5.4.1.13