SUPERMICRO-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
16
Rows
16
Columns
137

fsQoSPriorityMapTable

table
.1.3.6.1.4.1.10876.101.2.6.1.2.1 · 1 row entry · 10 columns
Open in standard view 
A table to map incoming priority to a regenerated priority. 
This table is used to regenerate port/VLAN priorities for an 
incoming packet. It can be used to directly program priority 
tables in the hardware.
fsQoSPriorityMapEntry entry .1.3.6.1.4.1.10876.101.2.6.1.2.1.1
An entry to map an incoming priority, drop-precedence to a
regenerated priority value for an ingress PORT/VLAN. The PORT/VLAN
indices may take dont-care (0) values as required.
Indexes
fsQoSPriorityMapID
Column Syntax OID
fsQoSPriorityMapID
The output priority map index for the incoming packet received over
ingress PORT/VLAN with specified incoming priority. This is unique for
each entry in the priority-map table.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.1
fsQoSPriorityMapName
This indicates the Name for the Priority map entry.
It should be unique in this Table.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.2
fsQoSPriorityMapIfIndex
Incoming Port Number. The PORT may take dont-care (0) values
as required.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.3
fsQoSPriorityMapVlanId
Vlan Id for Priority regeneration.The VlanId may
take dont-care (0) values as required.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.4
fsQoSPriorityMapInPriority
The incoming Priority value determined for the received frame.
This value is equivalent to the priority( VLAN (4 bit)/DSCP( 6 bit)
priority bits) indicated in the received frame, or one of the
evaluated priorities.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.5
fsQoSPriorityMapInPriType
The Incoming Priority Type is used to Identify the
'fsQoSPriorityMapInPriority' value is a VLAN PRI or IP TOS or IP DSCP
or MPLS EXP. if the Type is vlanDEI the we can set
'fsQoSPriorityMapInPriority' and 'fsQoSPrio…
Enumerationr/w
Enumerated Values:
0vlanPri
1ipTos
2ipDscp
3mplsExp
4vlanDEI
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.6
fsQoSPriorityMapRegenPriority
The Regenerated Priority value determined for the received frame.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.7
fsQoSPriorityMapRegenInnerPriority
The Regenerated Inner-VLAN (CVLAN) Priority value determined
for the received frame. It the Values is 8 then this object is not
configured by user
Unsigned32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.8
fsQoSPriorityMapConfigStatus
The status of the prority map entry. Indicates whether
entry is configured by management or is a default entry.
Enumeration
Enumerated Values:
1sysdefault
2management
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.9
fsQoSPriorityMapStatus
The status of this conceptual row. All writable objects in this
row may be modified at any time.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise returns inconsistentValue error.
Fo…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.2.1.1.10

fsQoSClassMapTable

table
.1.3.6.1.4.1.10876.101.2.6.1.2.2 · 1 row entry · 9 columns
Open in standard view 
This table contains the Multifield Classifier details. It takes input
from the ACL or priority-map table and outputs a CLASS for the 
traffic-class pattern/match.
fsQoSClassMapEntry entry .1.3.6.1.4.1.10876.101.2.6.1.2.2.1
A Multi-field Classifier entry maps an ACL entry or a priority-map
to a CLASS of Service.
Indexes
fsQoSClassMapId
Column Syntax OID
fsQoSClassMapId
An index that enumerates the MultiField Classifier table.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.1
fsQoSClassMapName
This indicates the Name for the Entry.Multiple ACL/priority-map
entries can map to the same CLASS. They need to be configured with
the same ClassMapName.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.2
fsQoSClassMapL2FilterId
This Object specifies the ID of the MAC filter, the details of which
should be matched against the incoming packet. A valid value of this
object is not mandatory for the creation of the conceptual row. However,
L2/L3 F…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.3
fsQoSClassMapL3FilterId
This Object specifies the ID of the IP filter, the details of which
should be matched against the incoming packet. A valid value of this
object is not mandatory for the creation of the conceptual row. However,
L2/L3 Fi…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.4
fsQoSClassMapPriorityMapId
This Object specifies the priority map ID for mapping incoming priority
against received packet.A valid value of this
object is not mandatory for the creation of the conceptual row. However,
L2/L3 FilterId is mutually e…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.5
fsQoSClassMapCLASS
This represents the Traffic CLASS to which an incoming frame pattern
is classified. The administrator needs to define the logical groups
that represent this CLASS. Multiple ACL/priority-map entries can
map to the same C…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.6
fsQoSClassMapClfrId
This represents the Classifier Id of teh Classifier in the Standard Qos Entry.
This used to get the datapath entry pointing to teh CLass-Map with respect to the
Standard MIB
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.7
fsQoSClassMapPreColor
This represents the color of the packet prior to metering.
The default Drop-Precedence for the packet can be evaluated
using this object. This value is overridden by the meter.
Enumerationr/w
Enumerated Values:
0none
1green
2yellow
3red
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.8
fsQoSClassMapStatus
The status of this conceptual row. All writable objects in this
row may be modified only when the row status is not active.
CreateAndGo not allowed ,it can be deleted 'destroy',
only if it is not referenced
by other …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.2.2.1.9

fsQoSClassToPriorityTable

table
.1.3.6.1.4.1.10876.101.2.6.1.2.3 · 1 row entry · 4 columns
Open in standard view 
This table assigns local priority values for a input CLASS. This table
is optional and can be configured as per user requirement. This table
is provided for easy mapping of CLASS to priority values. 
A set of non-contiguous CLASS values belong to a 
unique Group ( identified by a group name).
fsQoSClassToPriorityEntry entry .1.3.6.1.4.1.10876.101.2.6.1.2.3.1
An entry to specify a regenerated priority value for a input CLASS.
Indexes
fsQoSClassToPriorityCLASS
Column Syntax OID
fsQoSClassToPriorityCLASS
This represents the Traffic CLASS to which an incoming frame pattern
is classified. The administrator needs to define the traffic
class patterns that represent this CLASS. Multiple
ACL/priority-map entries can map to …
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.2.3.1.1
fsQoSClassToPriorityRegenPri
The Regenerated Priority value determined for the input CLASS.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.2.3.1.2
fsQoSClassToPriorityGroupName
This is for unique identification of the group to which a input
CLASS belongs.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.2.3.1.3
fsQoSClassToPriorityStatus
The status of this conceptual row. All writable objects in this
row may be modified only when the row status is not active.
it can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inc…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.2.3.1.4

fsQoSMeterTable

table
.1.3.6.1.4.1.10876.101.2.6.1.3.1 · 1 row entry · 11 columns
Open in standard view 
This table enumerates specific meters that a system may use to
police a stream of traffic. This may include all traffic on an
interface.
fsQoSMeterEntry entry .1.3.6.1.4.1.10876.101.2.6.1.3.1.1
An entry in the meter table describes a single conformance level
of a meter.
Indexes
fsQoSMeterId
Column Syntax OID
fsQoSMeterId
An index that enumerates the Meter entries.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.1
fsQoSMeterName
This indicates the Name for the meter entry.
It should be unique in this Table.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.2
fsQoSMeterType
The Metering algorithm associated with the Token Bucket meter.
MeterTyper/w
Textual Convention: MeterType Enumeration
Type Values:
1simpleTokenBucket
2avgRate
3srTCM
4trTCM
5tswTCM
6mefDecoupledMeter
7mefCoupledMeter
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.3
fsQoSMeterInterval
The time interval used with the token bucket. For:
1. Average Rate Meter, the Informal Differentiated Services Model
section 5.2.1, - Delta.
2. Simple Token Bucket Meter, the Informal Differentiated
Services Mode…
microsecondsUnsigned32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.4
fsQoSMeterColorMode
The user defined Meter Color Mode.
MeterColorModer/w
Textual Convention: MeterColorMode Enumeration
Type Values:
1colorAware
2colorBlind
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.5
fsQoSMeterCIR
The committed information rate as per MEF.
Must be >= 0. CIR must be less than or equal to EIR, if EIR > 0
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.6
fsQoSMeterCBS
The committed burst size as per MEF. Must be > 0 if CIR > 0.
Maximum allowable size will be jumbo frame size.
BytesUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.7
fsQoSMeterEIR
The excess information rate as per MEF.
Must be >= 0. EIR must be greater than or equal to CIR,
if EIR > 0. This is not applicable when MeterType is srtcm.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.8
fsQoSMeterEBS
The excess burst size as per MEF. Must be > 0 if EIR > 0.
BytesUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.9
fsQoSMeterNext
This specifies the meter entry ID to be used for applying the
second/next level of conformance on the incoming packet. A valid
value of this object is not mandatory for the creation of an
entry in the conceptual row.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.10
fsQoSMeterStatus
The status of this conceptual row. All writable objects in this
row may be modified only of the Entry is not ACTIVE.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsiste…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.3.1.1.11

fsQoSPolicyMapTable

table
.1.3.6.1.4.1.10876.101.2.6.1.3.2 · 1 row entry · 37 columns
Open in standard view 
This table contains the class-map to policy-map details.
fsQoSPolicyMapEntry entry .1.3.6.1.4.1.10876.101.2.6.1.3.2.1
An entry to map a policy for a class-map.
Indexes
fsQoSPolicyMapId
Column Syntax OID
fsQoSPolicyMapId
An index that enumerates the policy-map table entries.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.1
fsQoSPolicyMapName
This the Name for a policy entry. It should be unique in this Table.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.2
fsQoSPolicyMapIfIndex
This indicates the incoming interface identifier for which the policy
map is applied. A Valid value of this object is not mandatory for the
creation of an entry in this table.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.3
fsQoSPolicyMapCLASS
This indicates the Traffic CLASS for which the policy-map
needs to be applied. A valid value is not necessary for
creation of an entry in this table. When this object is configured as
dont-care(0), it is mandatory that…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.4
fsQoSPolicyMapPHBType
It indicates the PHB type to be used for filling the Default PHB
for the policy-map entry.
Enumerationr/w
Enumerated Values:
0none
1vlanPri
2ipTos
3ipDscp
4mplsExp
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.5
fsQoSPolicyMapDefaultPHB
It indicate the default out going PHB Values for the
Policy-Map. It may be overriden by the Meter used for the policy-map.
This value is interpreted by fsQoSPolicyMapPHBType.
Unsigned32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.6
fsQoSPolicyMapMeterTableId
The Object refers to a Meter table Id which is the index
for the Meter table. A Valid value of this object is
not mandatory for the creation of an entry in this table.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.7
fsQoSPolicyMapFailMeterTableId
The Object refers to a Meter table Id which is the index
of the Meter pointed to by diffServMeterFailNext.
A Valid value of this object is not mandatory for the
creation of an entry in this table.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.8
fsQoSPolicyMapInProfileConformActionFlag
This Object defines the action to be performed on the packet,
when the packets are found to be In profile.
Bitsr/w
Enumerated Values:
0none
1setFlagPort
2setFlagConfTos
3setFlagConfDscp
4setFlagConfVlanPrio
5setFlagConfVlanDE
6setFlagConfInnerVlanPrio
7setFlagConfMplsExp
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.9
fsQoSPolicyMapInProfileConformActionId
The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each action.
A Valid value of this object is
not…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.10
fsQoSPolicyMapInProfileActionSetPort
This Object sets the new port value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
out port value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.11
fsQoSPolicyMapConformActionSetIpTOS
This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
IP TOS value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.12
fsQoSPolicyMapConformActionSetDscp
This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
DSCP value.
Dscpr/w
Textual Convention: Dscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.13
fsQoSPolicyMapConformActionSetVlanPrio
Setting the Vlan Priority of the outgoing packet.
Setting of Vlan Priority is mutually exclusive to setting of Mpls EXP bits.
So setting the Vlan Priority to a non-zero value is only allowed when MplsExp is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.14
fsQoSPolicyMapConformActionSetVlanDE
Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsExp is 0
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.15
fsQoSPolicyMapConformActionSetInnerVlanPrio
Setting the Inner Vlan Priority of the outgoing packet.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.16
fsQoSPolicyMapConformActionSetMplsExp
Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non 0
value is only allowed when Vlan Prio is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.17
fsQoSPolicyMapConformActionSetNewCLASS
This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned prior to metering.
The administrator n…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.18
fsQoSPolicyMapInProfileExceedActionFlag
This Object defines the action to be performed on the packet,
when the packets are found to be In profile.
Bitsr/w
Enumerated Values:
0setFlagExcDrop
1setFlagExcTos
2setFlagExcDscp
3setFlagExcVlanPrio
4setFlagExcVlanDE
5setFlagExcInnerVlanPrio
6setFlagExcMplsExp
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.19
fsQoSPolicyMapInProfileExceedActionId
The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each action.
A Valid value of this object is
not…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.20
fsQoSPolicyMapExceedActionSetIpTOS
This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
IP TOS value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.21
fsQoSPolicyMapExceedActionSetDscp
This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
DSCP value.
Dscpr/w
Textual Convention: Dscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.22
fsQoSPolicyMapExceedActionSetInnerVlanPrio
Setting the Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allowed when MplsExp is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.23
fsQoSPolicyMapExceedActionSetVlanPrio
Setting the Inner-Vlan Priority of the outgoing packet.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.24
fsQoSPolicyMapExceedActionSetVlanDE
Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsEXP is 0.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.25
fsQoSPolicyMapExceedActionSetMplsExp
Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non-zero
value is only allowed when Vlan Prio is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.26
fsQoSPolicyMapExceedActionSetNewCLASS
This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned prior to metering.
The administrator n…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.27
fsQoSPolicyMapOutProfileActionFlag
This Object defines the action to be performed on the packet
when the packets are found to be out of profile.
Bitsr/w
Enumerated Values:
0setFlagDrop
1setFlagTos
2setFlagDscp
3setFlagVlanPrio
4setFlagVlanDE
5setFlagConfInnerVlanPrio
6setFlagMplsExp
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.28
fsQoSPolicyMapOutProfileActionId
The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each action.
A Valid value of this object is
not…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.29
fsQoSPolicyMapOutProfileActionSetIPTOS
This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new
Ip TOS value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.30
fsQoSPolicyMapOutProfileActionSetDscp
This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapOutProfileActionFlag is to assign
a new DSCP value.
Dscpr/w
Textual Convention: Dscp Integer32
Type Constraints:
range: 0..63
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.31
fsQoSPolicyMapOutProfileActionSetInnerVlanPrio
Setting the Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allowed when is MplsExp is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.32
fsQoSPolicyMapOutProfileActionSetVlanPrio
Setting the Inner Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allowed when is MplsExp is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.33
fsQoSPolicyMapOutProfileActionSetVlanDE
Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsEXP is 0.
Unsigned32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.34
fsQoSPolicyMapOutProfileActionSetMplsExp
Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non-zero
value is only allowed when is Vlan Prio is 0.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.35
fsQoSPolicyMapOutProfileActionSetNewCLASS
This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned prior to metering.
The administrator n…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.36
fsQoSPolicyMapStatus
The status of this conceptual row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.37

fsQoSQTemplateTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.1 · 1 row entry · 6 columns
Open in standard view 
The queue template table configures the queue attributes.
The template is re-used for configuring multiple queues.
fsQoSQTemplateEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.1.1
Each entry in the table is a Queue Template Configuration.
Indexes
fsQoSQTemplateId
Column Syntax OID
fsQoSQTemplateId
Queue Template Table Index.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.1
fsQoSQTemplateName
This the Name for a Entry. It should be unique in this Table.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.2
fsQoSQTemplateDropType
The type of drop algorithm used by this queue template. The value
other(1)requires further specification in some other MIB module.

In the tailDrop(2) algorithm, fsQoSQTemplateSize
represents the maximum…
Enumerationr/w
Enumerated Values:
1other
2tailDrop
3headDrop
4red
5alwaysDrop
6wred
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.3
fsQoSQTemplateDropAlgoEnableFlag
Enable/disable Drop Algorithm for Congestion Management
EnableStatusr/w
Textual Convention: EnableStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.4
fsQoSQTemplateSize
The Queue Size. This must be greater than or equal to the
fsQoSRandomDetectCfgMinAvgThresh and less-than/equal to
fsQoSRandomDetectCfgMaxAvgThresh if Random Detection is enabled.
This is depth in bytes of the queue bein…
bytesUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.5
fsQoSQTemplateStatus
The status of this conceptual row. All writable objects in this
row may be modified at any time.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.1.1.6

fsQoSRandomDetectCfgTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.2 · 1 row entry · 7 columns
Open in standard view 
A table to configure parameters for Random Detect Algorithm.
The table is Indexed by fsQoSQTemplateId  and
Drop Precedence (DP) (0 - 2).
Each entry represent random detect configurations
per QueueTemplate per Drop Precedence.
fsQoSRandomDetectCfgEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.2.1
Each entry in the table is a random drop Configuration.
Indexes
fsQoSQTemplateId fsQoSRandomDetectCfgDP
Column Syntax OID
fsQoSRandomDetectCfgDP
The Drop Precedence
0 - low drop precedence
1 - medium drop precedence
2 - high drop precedence
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.1
fsQoSRandomDetectCfgMinAvgThresh
The minimum average threshold for the random detect algorithm.
Below this threshold, packets are admitted into the queue.
The units are bits in accordance with Traffic Manager.
This must be less than or equal to the
…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.2
fsQoSRandomDetectCfgMaxAvgThresh
The maximum average threshold for the random detect algorithm.
Above this threshold, packets are discarded before entering
the queue. The units is bits in accordance with Traffic Manager.
This must be greater than or eq…
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.3
fsQoSRandomDetectCfgMaxPktSize
Maximum allowed Packet Size. The units is bytes.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.4
fsQoSRandomDetectCfgMaxProb
Maximum probability of discarding a packet in units of percentage.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.5
fsQoSRandomDetectCfgExpWeight
The exponential Weight for determining the average queue size.
Unsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.6
fsQoSRandomDetectCfgStatus
The status of this conceptual row. All writable objects in this
row may be modified at any time.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.2.1.7

fsQoSShapeTemplateTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.3 · 1 row entry · 7 columns
Open in standard view 
The shape template table configures the shaper attributes.
fsQoSShapeTemplateEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.3.1
Each entry in the table is a Shape Template Configuration.
Indexes
fsQoSShapeTemplateId
Column Syntax OID
fsQoSShapeTemplateId
Shape Template Table Index.
IndexInteger
Textual Convention: IndexInteger Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.1
fsQoSShapeTemplateName
This the Name for a Shape template Entry.
It should be unique in this Table.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.2
fsQoSShapeTemplateCIR
The committed information rate for packets through this queue.
Must be > 0.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.3
fsQoSShapeTemplateCBS
The committed burst size for packets through this queue.
Must be > 0 when CIR > 0.
BytesUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.4
fsQoSShapeTemplateEIR
The Excess information rate for packets through this hierarchy.
Must be >= 0. EIR must be greater than or equal to CIR, if EIR > 0.
Currently not used, for future use.
Agent returns EIR = 0 to represent that this row is…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.5
fsQoSShapeTemplateEBS
The excess burst size for packets through this hierarchy.
Must be > 0 when EIR > 0. Currently not used, for future use.
Agent returns EBS = 0 to represent that this row is not configured by
the manager.
BytesUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.6
fsQoSShapeTemplateStatus
The status of this conceptual row. All writable objects in this
row may be modified at any time.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.3.1.7

fsQoSQMapTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.4 · 1 row entry · 5 columns
Open in standard view 
Queue MAP table mapping an egress port, 
CLASS of service to a queue.
fsQoSQMapEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.4.1
Q MAP Entry mapping a CLASS of service or
RegenPriority from the fsQoSPolicyMapTable to a queue.
Indexes
IF-MIBifIndex fsQoSQMapCLASS fsQoSQMapRegenPriType fsQoSQMapRegenPriority
Column Syntax OID
fsQoSQMapCLASS
The input CLASS ( associated with an incoming packet) that needs
to be mapped to an outbound queue. This is mutually exclusive to
the RegenPriority object. CLASS should be 0 while configuring
RegenPriority specific Q.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.4.1.1
fsQoSQMapRegenPriType
The regenerated-priority type to interpret the value of
'fsQoSQMapRegenPriority' object. This object should be none
while configuring CLASS specific Queue.

If fsQoSQMapRegenPriType is internalPrio, then …
Enumeration
Enumerated Values:
0none
1vlanPri
2ipTos
3ipDscp
4mplsExp
5vlanDEI
6internalPrio
 .1.3.6.1.4.1.10876.101.2.6.1.4.4.1.2
fsQoSQMapRegenPriority
The regenerated-priority ( for an incoming packet) that needs
to be mapped to an outbound queue. This is mutually exclusive to
the CLASS configuration. This object should be 0 while configuring
CLASS specific Queue.
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.10876.101.2.6.1.4.4.1.3
fsQoSQMapQId
The Queue Identifier that uniquely identifies a queue relative to an
interface. It could be configured with a unique value in the system.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.4.1.4
fsQoSQMapStatus
The status of this conceptual row. All writable objects in this
row may be modified only when the row status is not active.
It can be deleted/destroyed independent of other Traffic class tables;
For any mib table that …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.4.1.5

fsQoSQTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.5 · 1 row entry · 8 columns
Open in standard view 
Table describing the queue parameters
fsQoSQEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.5.1
Q table entry
Indexes
IF-MIBifIndex fsQoSQId
Column Syntax OID
fsQoSQId
The Queue Identifier that uniquely identifies the queue
in the system/port.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.1
fsQoSQCfgTemplateId
The Queue template Id applied for configuring queue attributes.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.2
fsQoSQSchedulerId
The scheduler identifier that manages the specified queue.
This identifier is unique relative to an egress interface.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.3
fsQoSQWeight
User assigned weight to the CoS queue.
The assigned weights are used only when scheduling
algorithm is a weighted scheduling algorithm.
Unsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.4
fsQoSQPriority
User assigned priority for the CoS queue.
The assigned priority is used only when the scheduler uses a
priority based scheduling algorithm.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.5
fsQoSQShapeId
The shaper identifier that specifies the bandwidth requirements
for the queue. This object is not mandatory for the
creation of the row.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.6
fsQoSQStatus
Row Status to Create/Destroy the entry.
It can be deleted 'destroy', only if it is not referenced
by other dependent tables; otherwise it returns inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.7
fsQoSQType
The object indicates the type of the queue.
1- Unicast queue
2- Multicast queue
Unsigned32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.10876.101.2.6.1.4.5.1.8

fsQoSSchedulerTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.6 · 1 row entry · 6 columns
Open in standard view 
Scheduler table
fsQoSSchedulerEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.6.1
Scheduler table Entry.
Indexes
IF-MIBifIndex fsQoSSchedulerId
Column Syntax OID
fsQoSSchedulerId
The Scheduler Identifier that uniquely identifies the
scheduler in the system/egress interface.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.1
fsQoSSchedulerSchedAlgorithm
Sets the packet scheduling algorithm for the port
The default is strictPriority(1).
Enumerationr/w
Enumerated Values:
1strictPriority
2roundRobin
3weightedRoundRobin
4weightedFairQueing
5strictRoundRobin
6strictWeightedRoundRobin
7strictWeightedFairQueing
8deficitRoundRobin
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.2
fsQoSSchedulerShapeId
The shaper identifier that specifies the bandwidth requirements
for the scheduler. This object is not mandatory for the
creation of the conceptual row.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.3
fsQoSSchedulerHierarchyLevel
This indicates the depth of the queue/scheduler hierarchy.
A value of 0 indicates that there is no hierarchy and that all
queues/schedulers are port-bound.
0 - No hierarchy
1 - S1 schedulers (attached to the egress p…
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.4
fsQoSSchedulerGlobalId
The Scheduler Identifier that uniquely identifies the
scheduler in the system/egress interface.This object is
used only for creating Scheduler entry from the
standard QOS Scheduler table diffServSchedulerTable
as defi…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.5
fsQoSSchedulerStatus
Row Status to Create/Destroy the entry.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.6.1.6

fsQoSHierarchyTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.7 · 1 row entry · 6 columns
Open in standard view 
Hierarchy table for specifying the hierarchy details.
fsQoSHierarchyEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.7.1
Each entry specifies the queue/scheduler details to be used
for the next level hierarchy. The interface index associated with
the NextQ or Next Scheduler is obtained from this table index
- 'ifIndex'.
Indexes
IF-MIBifIndex fsQoSHierarchyLevel fsQoSSchedulerId
Column Syntax OID
fsQoSHierarchyLevel
This indicates the depth of the queue/scheduler hierarchy.
A value of 0 indicates that there is no hierarchy and that all
queues/schedulers are port-bound.
Unsigned32
Constraints:
range: 0-10
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.1
fsQoSHierarchyQNext
The output of this COSQ is sent to the scheduler attached to the queue.
For eg.,
A packet may flow from a cosq to the schedulers in the following way:
COSQ => S3 => S2 => S1 => Egress port.
The value of this object …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.2
fsQoSHierarchySchedNext
The next-level scheduler to which the scheduler output needs to
be sent. The value of this object could be unique in the system/port.
A valid value is not mandatory for the creation of the
conceptual row. This object…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.3
fsQoSHierarchyWeight
The Weight is specified if the Scheduler is connecting to a WFQ of
another Scheduler. Agent returns Weight = 0 to represent that this
object is not configured by the manager.
PercentageUnsigned32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.4
fsQoSHierarchyPriority
The Scheduler can connect to any of the Priority of the next-level
Scheduler. The priority is specified when the scheduler is
connecting to any of the priorities ( EF, AF, BE) of the
next level strict-priority schedu…
SchedulerPriorityr/w
Textual Convention: SchedulerPriority Integer32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.5
fsQoSHierarchyStatus
Row Status to Create/Destroy the entry.
It can be deleted 'destroy', only if it is not referenced
by other table; otherwise return inconsistentValue error.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.4.7.1.6

fsQoSDefUserPriorityTable

table
.1.3.6.1.4.1.10876.101.2.6.1.4.8 · 1 row entry · 2 columns
Open in standard view 
A table that contains default user priority for an interfae.
fsQoSDefUserPriorityEntry entry .1.3.6.1.4.1.10876.101.2.6.1.4.8.1
Table for configuring default user priority for each port. This is
used for assigning priority to the untagged packets received on the
interface.
Indexes
IF-MIBifIndex
Column Syntax OID
fsQoSPortDefaultUserPriority
The default ingress user priority for this port.
It will be used to set priority for an untagged Packets.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.10876.101.2.6.1.4.8.1.1
fsQoSPortPbitPrefOverDscp
The default pbit precedence for a port over DSCP is enabled.
It will be used to set preferece as P-Bit over DSCP
for the given tagged port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.10876.101.2.6.1.4.8.1.2

fsQoSPolicerStatsTable

table
.1.3.6.1.4.1.10876.101.2.6.1.5.1 · 1 row entry · 6 columns
Open in standard view 
A list of Policer Statistics.
fsQoSPolicerStatsEntry entry .1.3.6.1.4.1.10876.101.2.6.1.5.1.1
A collection of statistics kept for a particular Policer.
Indexes
fsQoSMeterId
Column Syntax OID
fsQoSPolicerStatsConformPkts
Number of Packets marked down as conforming(Green) traffic
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.1
fsQoSPolicerStatsConformOctets
Number of Octets of traffic marked down as conforming(Green)
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.2
fsQoSPolicerStatsExceedPkts
Number of Packets marked down as exceeding(Yellow) traffic
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.3
fsQoSPolicerStatsExceedOctets
Number of Octets of traffic marked down as exceeding(Yellow)
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.4
fsQoSPolicerStatsViolatePkts
Number of Packets marked down as violating(Red) traffic
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.5
fsQoSPolicerStatsViolateOctets
Number of Octets of traffic marked down as violating(Red)
by this policer.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.1.1.6

fsQoSCoSQStatsTable

table
.1.3.6.1.4.1.10876.101.2.6.1.5.2 · 1 row entry · 9 columns
Open in standard view 
A list of  class-of-service based Queue Statistics for a COS Queue.
fsQoSCoSQStatsEntry entry .1.3.6.1.4.1.10876.101.2.6.1.5.2.1
A collection of CoS Queue statistics for a particular COS queue.
Indexes
IF-MIBifIndex fsQoSCoSQId
Column Syntax OID
fsQoSCoSQId
The COSQ for which the statistics is being collected.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.1
fsQoSCoSQStatsEnQPkts
Number of packets enqueued in this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.2
fsQoSCoSQStatsEnQBytes
Number of bytes enqueued in this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.3
fsQoSCoSQStatsDeQPkts
Number of packets de-queued from this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.4
fsQoSCoSQStatsDeQBytes
Number of bytes de-queued from this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.5
fsQoSCoSQStatsDiscardPkts
Number of packets discarded from this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.6
fsQoSCoSQStatsDiscardBytes
Number of bytes discarded from this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.7
fsQoSCoSQStatsOccupancy
Number of bytes currently occupied in the CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.8
fsQoSCoSQStatsCongMgntAlgoDrop
Number of bytes discarded due to congestion management
algorithm (RED/WRED) in this CoS Queue.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.10876.101.2.6.1.5.2.1.9

fsQosHwCpuRateLimitTable

table
.1.3.6.1.4.1.10876.101.2.6.1.6.1 · 1 row entry · 4 columns
Open in standard view 
Table describing the queue parameters for CPU port
fsQosHwCpuRateLimitEntry entry .1.3.6.1.4.1.10876.101.2.6.1.6.1.1
CPU Rate Limit table entry
Indexes
fsQosHwCpuQId
Column Syntax OID
fsQosHwCpuQId
The Queue Identifier that uniquely identifies the queue
in the system/port.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.6.1.1.1
fsQosHwCpuMinRate
This object controls the minimum transmission rate
on a cpu port. Min Rate must be less than or equal
to Max Rate.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.6.1.1.2
fsQosHwCpuMaxRate
This object controls the maximum transmission rate on
a cpu port. Max Rate must be greater than or equal to
Min Rate.
Unsigned32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.10876.101.2.6.1.6.1.1.3
fsQosHwCpuRowStatus
This object indicates the status of this entry.
The entry in this table is used when the status of this object
is SET 'active'. The entry in this table is not used when this
object is SET 'notInService'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.10876.101.2.6.1.6.1.1.4