fsQoSPolicyMapFailMeterTableId
SUPERMICRO-QOS-MIB ·
.1.3.6.1.4.1.10876.101.2.6.1.3.2.1.8
Object
The Object refers to a Meter table Id which is the index of the Meter pointed to by diffServMeterFailNext. A Valid value of this object is not mandatory for the creation of an entry in this table.
Context
- MIB
- SUPERMICRO-QOS-MIB
- OID
.1.3.6.1.4.1.10876.101.2.6.1.3.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsQoSPolicyMapEntry
- Table
- fsQoSPolicyMapTable
- Siblings
- 36
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsQoSPolicyMapId An index that enumerates the policy-map table entries. | column | IndexInteger | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.1 |
| fsQoSPolicyMapInProfileConformActionId The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each act… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.10 |
| fsQoSPolicyMapInProfileActionSetPort This Object sets the new port value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
out port value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.11 |
| fsQoSPolicyMapConformActionSetIpTOS This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
IP TOS value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.12 |
| fsQoSPolicyMapConformActionSetDscp This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
DSCP value. | column | Dscp | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.13 |
| fsQoSPolicyMapConformActionSetVlanPrio Setting the Vlan Priority of the outgoing packet.
Setting of Vlan Priority is mutually exclusive to setting of Mpls EXP bits.
So setting the Vlan Priority to a non-zero value is o… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.14 |
| fsQoSPolicyMapConformActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsExp is 0 | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.15 |
| fsQoSPolicyMapConformActionSetInnerVlanPrio Setting the Inner Vlan Priority of the outgoing packet. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.16 |
| fsQoSPolicyMapConformActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non 0
value is only allowed wh… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.17 |
| fsQoSPolicyMapConformActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.18 |
| fsQoSPolicyMapInProfileExceedActionFlag This Object defines the action to be performed on the packet,
when the packets are found to be In profile. | column | Bits | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.19 |
| fsQoSPolicyMapName This the Name for a policy entry. It should be unique in this Table. | column | OctetString | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.2 |
| fsQoSPolicyMapInProfileExceedActionId The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each act… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.20 |
| fsQoSPolicyMapExceedActionSetIpTOS This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
IP TOS value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.21 |
| fsQoSPolicyMapExceedActionSetDscp This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapInProfileActionFlag is to assign a new
DSCP value. | column | Dscp | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.22 |
| fsQoSPolicyMapExceedActionSetInnerVlanPrio Setting the Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allowed wh… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.23 |
| fsQoSPolicyMapExceedActionSetVlanPrio Setting the Inner-Vlan Priority of the outgoing packet. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.24 |
| fsQoSPolicyMapExceedActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsEXP is 0. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.25 |
| fsQoSPolicyMapExceedActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non-zero
value is only allowed… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.26 |
| fsQoSPolicyMapExceedActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.27 |
| fsQoSPolicyMapOutProfileActionFlag This Object defines the action to be performed on the packet
when the packets are found to be out of profile. | column | Bits | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.28 |
| fsQoSPolicyMapOutProfileActionId The Object refers to an Action table Id which is the index
for the Action table. This is for the reference of the StdQos mib.
where we have to mention an action table for each act… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.29 |
| fsQoSPolicyMapIfIndex This indicates the incoming interface identifier for which the policy
map is applied. A Valid value of this object is not mandatory for the
creation of an entry in this table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.3 |
| fsQoSPolicyMapOutProfileActionSetIPTOS This Object sets the new IP TOS value in case the action
selected by fsQoSPolicyMapOutProfileActionFlag is to assign a new
Ip TOS value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.30 |
| fsQoSPolicyMapOutProfileActionSetDscp This Object sets the new DSCP value in case the action
selected by fsQoSPolicyMapOutProfileActionFlag is to assign
a new DSCP value. | column | Dscp | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.31 |
| fsQoSPolicyMapOutProfileActionSetInnerVlanPrio Setting the Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allowed whe… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.32 |
| fsQoSPolicyMapOutProfileActionSetVlanPrio Setting the Inner Vlan Priority of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Vlan Priority to a non-zero
value is only allow… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.33 |
| fsQoSPolicyMapOutProfileActionSetVlanDE Setting the VLAN Drop Eligible Indicator of the outgoing packet.
This is applicable ONLY when MplsEXP is 0. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.34 |
| fsQoSPolicyMapOutProfileActionSetMplsExp Setting the Mpls Experimental bits of the outgoing packet.
Either Vlan Priority can be set OR Mpls EXP bits
can be set. So setting the Mpls EXP to a non-zero
value is only allowed… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.35 |
| fsQoSPolicyMapOutProfileActionSetNewCLASS This represents the Traffic CLASS to which an incoming frame pattern
is classified after metering. The priority of the New CLASS should
be lower as compared to the CLASS assigned… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.36 |
| fsQoSPolicyMapStatus The status of this conceptual row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.37 |
| fsQoSPolicyMapCLASS This indicates the Traffic CLASS for which the policy-map
needs to be applied. A valid value is not necessary for
creation of an entry in this table. When this object is configur… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.4 |
| fsQoSPolicyMapPHBType It indicates the PHB type to be used for filling the Default PHB
for the policy-map entry. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.5 |
| fsQoSPolicyMapDefaultPHB It indicate the default out going PHB Values for the
Policy-Map. It may be overriden by the Meter used for the policy-map.
This value is interpreted by fsQoSPolicyMapPHBType. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.6 |
| fsQoSPolicyMapMeterTableId The Object refers to a Meter table Id which is the index
for the Meter table. A Valid value of this object is
not mandatory for the creation of an entry in this table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.7 |
| fsQoSPolicyMapInProfileConformActionFlag This Object defines the action to be performed on the packet,
when the packets are found to be In profile. | column | Bits | .1.3.6.1.4.1.10876.101.2.6.1.3.2.1.9 |