RAD-Services-MIB Table View

This table allows user to define several
WFQ tables per output port.
          
WFQ supports flows with different bandwidth requirements 
by giving each queue a weight that assigns it 
a different percentage of output port bandwidth.
          
When Weighted Fair Queuing is used, 
it is possible to precisely attribute bandwidth 
partitioning among the queues. 
When there is congestion, each class (queue) 
is not allowed to use more bandwidth than the amount 
allocated to it.

wfqEntry row .1.3.6.1.4.1.164.6.3.1.1.1

An entry in the Weighted Fair Queueing table.

Indexes

wfqCnfgIdx wfqPrtIdx wfqTblIdx wfqQueueIdx

Column	Syntax	OID
wfqCnfgIdx This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object wil…	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.6.3.1.1.1.1
wfqPrtIdx This object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some products, the numbering can equal ifIndex. Value of 255 (not …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.1.1.1.2
wfqTblIdx This object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will select which one will be used for a virtual concatenation group.Valid values are 1,2	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.1.1.1.3
wfqQueueIdx This object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of the 3 first queues.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.1.1.1.4
wfqRowStatus This object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.1.1.1.5
wfqWeightValue This object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in order to leave some BW percentage for last queue) Note th…	%Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.164.6.3.1.1.1.6
wfqSchedulingMode This object controls which scheduling mode is used: Weighted Fair Queuing (WFQ) scheme or priority Queue (Strict Priority).	Enumerationr/w Enumerated Values: 2 disable 3 enable	.1.3.6.1.4.1.164.6.3.1.1.1.7
wfqMinRateAbsolute The minimum absolute rate, in kbps, that should be allocated to this queue. If the value is zero, then there is effectively no minimum rate guarantee. If the value is non-zero, then the servicing of this queue in at…	KbpsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.1.1.1.8
wfqMaxPacketSize The size of the largest packet which can be received on this queue, specified in octets. Packets larger than this size will be discarded.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.1.1.1.9

Mapping of DSCP value to a regenerated priority level.

dscpMappingEntry row .1.3.6.1.4.1.164.6.3.2.1.1

An entry in dscpMappingTable.

Indexes

dscpMappingCnfgIdx dscpMappingDscpIdx

Column	Syntax	OID
dscpMappingCnfgIdx This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Agents that support only one configuration, this object …	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.164.6.3.2.1.1.1
dscpMappingDscpIdx DSCP value of the incoming IP packet	Dscp Type Constraints: range: 0..63	.1.3.6.1.4.1.164.6.3.2.1.1.2
dscpMappingRegenPriority The Regenerated Priority level the incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.2.1.1.3

The TE QOS Interface Table.

ifTeQosEntry row .1.3.6.1.4.1.164.6.3.3.1.1

An entry in the TE QOS Interface table.

Indexes

ifTeQosIdx1 ifTeQosIdx2 ifTeQosIdx3

Column	Syntax	OID
ifTeQosIdx1 This object indicates the 1st Index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.3.1.1.1
ifTeQosIdx2 This object indicates the 2nd Index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.3.1.1.2
ifTeQosIdx3 This object indicates the 3rd Index of the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.3.1.1.3
ifTeQosParam This object is used for QOS attributes of the entry's entities.	OctetStringr/w	.1.3.6.1.4.1.164.6.3.3.1.1.4
ifTeQosParam2 This object is used for 2nd group QOS attributes of the entry's entities.	OctetStringr/w	.1.3.6.1.4.1.164.6.3.3.1.1.5
ifTeQosStatus This object is used to create, activate and destroy entries of this table.	Enumerationr/w Enumerated Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.164.6.3.3.1.1.6

A table - Parameters per port per Priority .

prtPriorityEntry row .1.3.6.1.4.1.164.6.3.4.1.1

An entry in table.

Indexes

prtPriorityIdx1 prtPriorityPrtIdx prtPriorityIdx

Column	Syntax	OID
prtPriorityIdx1 This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg. or any other Index.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.6.3.4.1.1.1
prtPriorityPrtIdx This object indicates a unique Port Index. Refer to device specification for port Index.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.164.6.3.4.1.1.2
prtPriorityIdx This object indicates the Traffic Priority Index.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.4.1.1.3
prtPriorityIngressRateLimit The maximum rate permitted at Ingress of this port with this Traffic Priority, in Kbps.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.4.1.1.4

Port QoS (Quality of Service) table.

prtQosEntry row .1.3.6.1.4.1.164.6.3.4.2.1

An entry in table.

Indexes

prtQosIdx prtQosPrtIdx prtQosDirection

Column	Syntax	OID
prtQosIdx The first index of the table. This attribute might indicate the Idx of the Cnfg (1..255) being accessed ; Idx of 255 relates to the TmpCnfg or any other Index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.1
prtQosPrtIdx This object indicates a unique Port Index. Refer to device specification for port Index.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.2
prtQosDirection This object indicates the port's QoS Direction.	Enumeration Enumerated Values: 1 all 2 ingress 3 egress	.1.3.6.1.4.1.164.6.3.4.2.1.3
prtQosRateLimitPacketType This object indicates the Type of Packets on which Rate Limitation is applied.	Enumerationr/w Enumerated Values: 1 all 2 bcastAndMcastAndFloodedUcast 3 bcastAndMcast 4 bcast	.1.3.6.1.4.1.164.6.3.4.2.1.4
prtQosRateLimitCIR This object indicates the port's CIR (Committed Information Rate) in Kbps. Value=0 represents best effort.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.5
prtQosRateLimitCBS This object indicates the port's CBS (Committed Burst Size) in KB. Value=0 represents best effort.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.6
prtQosRateLimitEIR This object indicates the port's EIR (Excess Information Rate) in Kbps.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.7
prtQosRateLimitEBS This object indicates the port's EBS (Excess Burst Size) in KB.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.4.2.1.8

Mapping of port to Traffic Class level.

portTrafficClassEntry row .1.3.6.1.4.1.164.6.3.5.1.1

An entry in portTrafficClassTable.

Indexes

portTrafficClassIdx1 portTrafficClassPortIdx

Column	Syntax	OID
portTrafficClassIdx1 This attribute indicates the 1st index of the table. This may be the Idx of the Cnfg(1..255) being accessed; Idx of 255 relates to the TmpCnfg, or any other Index.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.164.6.3.5.1.1.1
portTrafficClassPortIdx This object indicates a unique Port Index. Refer to device specification for port Index.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.164.6.3.5.1.1.2
portTrafficClass This object indicates the Traffic Class level of this port.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.5.1.1.3

Table of services.

serviceEntry row .1.3.6.1.4.1.164.6.3.6.1

An entry in the Service Table.

Indexes

IF-MIBifIndex flowIndex serviceIndex

Column	Syntax	OID
flowIndex Defines the Flow ID the service is associated to.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.6.1.1
serviceIndex Defines the Service ID - according to the CoS.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.6.1.2
serviceRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.6.1.3
serviceName This attribute defines the service name.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.6.1.4
serviceBwProfileId This variable holds the index of the Ingress BW profile assigned to that service.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.6.1.5

This table defines  mapping of Ethernet Virtual Connection 
(EVC) ID to Class of Service (CoS) ID

evcCosEntry row .1.3.6.1.4.1.164.6.3.7.1

An entry in table.

Indexes

evcCosCnfgIdx evcCosEvcIdx

Column	Syntax	OID
evcCosCnfgIdx This attribute indicates the Idx of the Cnfg(1..255) being accessed ; Idx of 255 relates to the TmpCnfg.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.164.6.3.7.1.1
evcCosEvcIdx This attribute indicates EVC Id.	Unsigned32 Constraints: range: 1-4095	.1.3.6.1.4.1.164.6.3.7.1.2
evcCosRowStatus This attribute allows to create/delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.7.1.3
evcCosEvcName A string that identifies the EVC. It should be unique in the Maintenance Domain (i.e., in the managed network) Used as MEG ID field in OAM messages.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.7.1.5
evcCosSpVlanId This object indicates the SP (Service Provider) VLAN used when sending an OAM message for the specified EVC.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.7.1.6

Service statistics table.

serviceStatEntry row .1.3.6.1.4.1.164.6.3.8.1

An entry in the Service Statistics Table.

Indexes

IF-MIBifIndex flowIndex serviceIndex serviceStatDirection

Column	Syntax	OID
serviceStatDirection The direction in which the measurement is taken.	Enumeration Enumerated Values: 1 upstream 2 downstream 255 notApplicable	.1.3.6.1.4.1.164.6.3.8.1.1
srvForwardGreenPackets This attribute displays the counted number of forwarded packets that where marked Green.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.2
srvForwardGreenPacketsOverflow This attribute displays the number of times that the forwardGreenPackets counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.3
srvForwardYellowPackets This attribute displays the counted number of forwarded packets that where marked Yellow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.4
srvForwardYellowPacketsOverflow This attribute displays the number of times that the forwardYellowPackets counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.5
srvDiscardGreenPackets This attribute displays the counted number of discarded packets that where marked Green.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.6
srvDiscardGreenPacketsOverflow This attribute displays the number of times that the discardGreenPacket counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.7
srvDiscardYellowRedPackets This attribute displays the counted number of discarded packets that where marked Yellow or Red.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.8
srvDiscardYellowRedPacketsOverflow This attribute displays the number of times that the discardYellowRedPackets counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.9
srvForwardGreenBytes This attribute displays the counted number of forwarded bytes that where marked Green.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.10
srvForwardGreenBytesOverflow This attribute displays the number of times that the forwardGreenBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.11
srvForwardYellowBytes This attribute displays the counted number of forwarded bytes that where marked Yellow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.12
srvForwardYellowBytesOverflow This attribute displays the number of times that the forwardYellowBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.13
srvDiscardGreenBytes This attribute displays the counted number of discarded bytes that where marked Green.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.14
srvDiscardGreenBytesOverflow This attribute displays the number of times that the discardGreenBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.15
srvDiscardYellowRedBytes This attribute displays the counted number of discarded bytes that where marked Yellow or Red.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.16
srvDiscardYellowRedBytesOverflow This attribute displays the number of times that the discardYellowRedBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.17
srvResetStatsCmd Reset statistic counters of the service.	Enumerationr/w Enumerated Values: 2 off 3 on	.1.3.6.1.4.1.164.6.3.8.1.18
srvDiscardYellowPackets This attribute displays the counted number of discarded packets that where marked Yellow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.19
srvDiscardYellowPacketsOverflow This attribute displays the number of times that the discardYellowPackets counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.20
srvDiscardYellowBytes This attribute displays the counted number of discarded bytes that where marked Yellow.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.21
srvDiscardYellowBytesOverflow This attribute displays the number of times that the discardYellowBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.22
srvDiscardRedPackets This attribute displays the counted number of discarded packets that where marked Red.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.23
srvDiscardRedPacketsOverflow This attribute displays the number of times that the discardRedPackets counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.24
srvDiscardRedBytes This attribute displays the counted number of discarded bytes that where marked Red.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.25
srvDiscardRedBytesOverflow This attribute displays the number of times that the discardRedBytes counter has overflowed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.8.1.26

This table holds flow mapping profiles.

flowMappingProfileEntry row .1.3.6.1.4.1.164.6.3.9.1.1

Each entry in this table describes one Flow mapping profile with
one of its Flow Mapping supported, according to the Priority order.
The information includes a reference to a Flow Mapping index.

Indexes

flowMappingProfileIndex flowMappingProfilePriority

Column	Syntax	OID
flowMappingProfileIndex A running index for the Flow Mapping Profile table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.1.1.1
flowMappingProfilePriority The priority of the selected Mapping.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.9.1.1.2
flowMappingProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.9.1.1.3
flowMappingProfileNumOfMaps This attribute determines the number of the mappings associated to the Flow Mapping Profile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.1.1.4
flowMappingProfileMapIndexdeprecated This attribute holds a reference to the mapping index. It specifies the mapping selected for the Mapping Profile for the selected Priority. When flowMappingProfileNumOfMaps=0, this attribute is not relevant.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.1.1.5
flowMappingProfileName This attribute defines the name assigned to flowMappingIndex profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.9.1.1.6
flowMappingProfileCondition This attribute defines the condition between the mappings/rules associated to this Flow Mapping Profile.	Enumerationr/w Enumerated Values: 2 or 3 and	.1.3.6.1.4.1.164.6.3.9.1.1.7

A table of Flow Mapping.

qosFlowMappingEntry row .1.3.6.1.4.1.164.6.3.9.2.1

Each entry in this table describes one Flow Mapping.
The information includes combination (AND function) of all the
classifications, as defined in the qosFlowMappingCriteria field.
Classifiers are: TOS, DSCP, VLAN ID, M…

Indexes

qosFlowMappingIdx1 qosFlowMappingIdx2 qosFlowMappingIdx3

Column	Syntax	OID
qosFlowMappingIdx1 - In case the table is accessed via flowMappingProfileTable this is a running index for the QoS Flow Mapping table. - In case the table is not accessed via flowMappingProfileTable, this will be the ifIndex of the XNI (b…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.1
qosFlowMappingIdx2 An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not accessed via flowMappingProfileTable, this will be the index o…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.2
qosFlowMappingIdx3 An index for the QoS Flow Mapping table. - In case the table is accessed via flowMappingProfileTable the index will be fixed = 1. - In case the table is not accessed via flowMappingProfileTable, this will be the Priorit…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.3
qosFlowMappingRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.9.2.1.4
qosFlowMappingCriteria This attribute determines upon which criterion the flow will be mapped.	Bitsr/w Enumerated Values: 0 ieee802dot1p 1 tos 2 dscp 3 vlanId 4 macSrcAddr 5 macDestAddr 6 ipSrcAddr 7 ipDestAddr 8 tcpSrcPort 9 tcpDestPort 10 udpSrcPort 11 udpDestPort 12 ipPrecedence 13 innerIeee802dot1p 14 innerVlanId 15 untagged 16 nonIP 17 etherType 18 myMac 19 myIp	.1.3.6.1.4.1.164.6.3.9.2.1.5
qosFlowMappingIeee802dot1p This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different 802.1 P-bit value. Setting '1' to the bit means that the corresponding 802.1 P-bit value is applicable. It …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.6
qosFlowMappingTos This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different TOS value. Setting '1' to the bit means that the corresponding TOS value is applicable. It is relevant only…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.7
qosFlowMappingFromDscp This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.8
qosFlowMappingToDscp This attribute determines the first DSCP value to compare with in a range. It is relevant only in case the dscp bit (2) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.9
qosFlowMappingFromVlanId This attribute determines the first VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.10
qosFlowMappingToVlanId This attribute determines the last VLAN ID value to compare with in a range. It is relevant only in case the vlanId bit (3) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.11
qosFlowMappingFromSrcMacAddr This attribute determines the first source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria equals 1.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.9.2.1.12
qosFlowMappingToSrcMacAddr This attribute determines the last source MAC address to compare with in a range. It is relevant only in case the macSrcAddr bit (4) in qosFlowMappingCriteria equals 1.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.9.2.1.13
qosFlowMappingFromDestMacAddr This attribute determines the first destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCriteria equals 1.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.9.2.1.14
qosFlowMappingToDestMacAddr This attribute determines the last destination MAC address to compare with in a range. It is relevant only in case the macDestAddr (5) bit in qosFlowMappingCriteria equals 1.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.9.2.1.15
qosFlowMappingFromSrcIpAddrdeprecated This attribute determines the first source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria equals 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.3.9.2.1.16
qosFlowMappingToSrcIpAddrdeprecated This attribute determines the last source IP address to compare with in a range. It is relevant only in case the ipSrcAddr (6) bit in qosFlowMappingCriteria equals 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.3.9.2.1.17
qosFlowMappingFromDestIpAddrdeprecated This attribute determines the first destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCriteria equals 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.3.9.2.1.18
qosFlowMappingToDestIpAddrdeprecated This attribute determines the last destination IP address to compare with in a range. It is relevant only in case the ipDestAddr (7) bit in qosFlowMappingCriteria equals 1.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.164.6.3.9.2.1.19
qosFlowMappingFromTcpSrcPort This attribute determines the first TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.20
qosFlowMappingToTcpSrcPort This attribute determines the last TCP source port to compare with in a range. It is relevant only in case the tcpSrcPort bit (8) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.21
qosFlowMappingFromTcpDestPort This attribute determines the first TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.22
qosFlowMappingToTcpDestPort This attribute determines the last TCP destination port to compare with in a range. It is relevant only in case the tcpDestPort bit (9) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.23
qosFlowMappingFromUdpSrcPort This attribute determines the first UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.24
qosFlowMappingToUdpSrcPort This attribute determines the last UDP source port to compare with in a range. It is relevant only in case the udpSrcPort bit (10) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.25
qosFlowMappingFromUdpDestPort This attribute determines the first UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.26
qosFlowMappingToUdpDestPort This attribute determines the last UDP destination port to compare with in a range. It is relevant only in case the udpDestPort bit (11) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.27
qosFlowMappingFromIpPrecedence This attribute determines the first IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.28
qosFlowMappingToIpPrecedence This attribute determines the last IpPrecedence value to compare with in a range. It is relevant only in case the IpPrecedence bit (12) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.29
qosFlowMappingInnerIeee802dot1p This attribute determines which TOS values are applicable for that flow. Each bit (0..7) represents a different inner 802.1 P-bit value. Setting '1' to the bit means that the corresponding inner 802.1 P-bit value is app…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.30
qosFlowMappingFromInnerVlanId This attribute determines the first inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.31
qosFlowMappingToInnerVlanId This attribute determines the last inner VLAN ID value to compare with in a range. It is relevant only in case the innerVlanId bit(14) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.32
qosFlowMappingEtherType Determines the Tag Protocol Identifier (in Hex). For example: 0x8100 (C-TAG) 0x88A8 (S-TAG) It is relevant only in case the etherType bit (17) in qosFlowMappingCriteria equals 1.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.9.2.1.33

Class of Service Profile table.
Each profile holds a priority method, and a mapping function
that maps the priority values (range according to the method)
into CoS values.

cosProfileEntry row .1.3.6.1.4.1.164.6.3.10.1

A conceptual row where each row contains one CoS attributes.

Indexes

cosProfileIndex

Column	Syntax	OID
cosProfileIndex Defines the CoS Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.10.1.1
cosProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.10.1.2
cosProfileCosMethod Defines the priority method upon CoS mapping is done.	ProfileMethodr/w Type Values: 2 ieee802dot1p 3 tos 4 dscp 5 ipPrecedence 6 userPorts 7 internalCos 8 dei	.1.3.6.1.4.1.164.6.3.10.1.3
cosProfileName This attribute defines the name assigned to CoS profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.10.1.4
cosProfileCosMapping This attribute defines the value of the CoS that is assigned for each priority. The number of the valid octets depends upon the priority method selected: Octet 0 corresponds to priority = 0 Octet 1 corresponds to priori…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.164.6.3.10.1.5

This table defines the profiles for a cluster of queues.

qProfileEntry row .1.3.6.1.4.1.164.6.3.11.1.1

A conceptual row where each row contains one Queue Cluster attribute.

Indexes

qProfileIndex

Column	Syntax	OID
qProfileIndex Defines the Queue Cluster Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.1.1.1
qProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.11.1.1.2
qProfileName This attribute holds the name of the Queue cluster profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.11.1.1.3
qProfileNumberOfInternalQ This attribute holds the number of the internal queue profiles that are pointed by qProfileInternalQProfile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.1.1.4
qProfileInternalQProfile This attribute is a vector that holds the indices to the queue profiles in the qInternalProfileTable. The index length depends on specific product realization and may equal two or four octets.	OctetStringr/w	.1.3.6.1.4.1.164.6.3.11.1.1.5

This table holds queue profiles.

qInternalProfileEntry row .1.3.6.1.4.1.164.6.3.11.2.1

A conceptual row where each row contains one Queue attribute.

Indexes

qInternalProfileIndex

Column	Syntax	OID
qInternalProfileIndex Defines the Queue Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.1
qInternalProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.11.2.1.2
qInternalProfileScheduling This attribute determines the queue scheduling method.	Enumerationr/w Enumerated Values: 1 wfq 2 strict 3 bestEffort	.1.3.6.1.4.1.164.6.3.11.2.1.3
qInternalProfileWFQWeight This attribute determines the weight that each WFQ (Weighted Fair Queue) participant gets. It is applicable only when scheduling is configured to WFQ.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.4
qInternalProfileQueueLength This attribute determines the length of the queue.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.5
qInternalProfileWredStartDropThreshdeprecated This attribute determines the length that the queue (Start Value) must reach before the packets colored yellow will start being dropped by the WRED (Weighted Random Early Detection/Discard) mechanism. WRED is one the mo…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.6
qInternalProfileWredDropAllThreshdeprecated This attribute determines the length that the queue (Stop Value) must reach before the WRED (Weighted Random Early Detection) shaper mechanism stops dropping randomly, and just drops all further packets marked as yellow.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.7
qInternalProfileWredDropProbabilitydeprecated This attribute determines the percentage of packets that are being dropped at the point when the length of the queue reaches the Stop value. So, effectively, this defines how quickly the rate of dropping packet must inc…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.8
qInternalProfileRateLimit This attribute determines the Rate Limit of the queue in Kbps. Value=0 represents best effort.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.9
qInternalProfileShaperProfile This attribute defines the Shaper Profile (bwProfileIndex from bwProfileTable) assigned to this qInternalProfile. Valid range of bwProfileIndex for Shaper Profiles index starts from 0x8000001. If set to '0', no profile…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.10
qInternalProfileWredProfile This attribute defines the WRED Profile (wredProfileIndex from wredProfileTable) assigned to this qInternalProfile. If set to '0', no profile is assigned to this qInternalProfile.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.2.1.11
qInternalProfileFrameBuffers This attribute determines the number of frame buffers assigned to a queue.	Unsigned32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.164.6.3.11.2.1.13

This table defines the queue groups/blocks,their level and connections
between them.

queueGroupEntry row .1.3.6.1.4.1.164.6.3.11.3.1

A conceptual row where each row contains one Queue group.

Indexes

queueGroupName queueGroupQBlockLevel queueGroupQBlockIdx

Column	Syntax	OID
queueGroupName Defines the Queue Group unique name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.164.6.3.11.3.1.1
queueGroupQBlockLevel This attribute holds the Level of the Queue Block. First level is 1. NA=2^32-1.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.3.1.2
queueGroupQBlockIdx This attribute holds the ID of the Queue Block. NA=2^32-1.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.3.1.3
queueGroupRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.11.3.1.4
queueGroupQBlockProfile This attribute defines the Queue profile assigned to this Queue Block. This object points to qProfileIndex in qProfileTable.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.3.1.5
queueGroupQBlockShaperProfile This attribute defines the Shaper profile assigned to this Queue Block.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.3.1.6
queueGroupPointToQBlock This attribute defines the Queue Block name of the next Queue Block level that is pointed by this Queue Block.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.3.11.3.1.7
queueGroupPointToInternalQueue This attribute defines the internal queue within queueGroupPointToQBlock that is pointed by this Queue Block.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.11.3.1.8
queueGroupQBlockName This attribute holds the name of the Queue Block.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.164.6.3.11.3.1.9

Marking profile table. Each profile holds a marking function
which converts CoS values to Service Provider priority values.

markingProfileEntry row .1.3.6.1.4.1.164.6.3.12.1

A conceptual row where each row contains one Marking attribute.

Indexes

markingProfileIndex

Column	Syntax	OID
markingProfileIndex Defines the Marking Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.12.1.1
markingProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.12.1.2
markingProfileName This attribute defines the unique name assigned to the marking profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.12.1.3
markingSpVlanPBit This attribute defines the value of the SP VLAN P-bit that is assigned for each frame according to the value of markingProfileMethod parameter : Octet 0 corresponds to value 0 of P-bit/DSCP/TOS/IP Preced…	OctetStringr/w Constraints: range: 192-192	.1.3.6.1.4.1.164.6.3.12.1.4
markingProfileMethod This attribute defines the method that marking is done with.	ProfileMethodr/w Type Values: 2 ieee802dot1p 3 tos 4 dscp 5 ipPrecedence 6 userPorts 7 internalCos 8 dei	.1.3.6.1.4.1.164.6.3.12.1.5
markingProfileColorAware This parameter will be supported only for products that support priority marking according to the policer color (e.g ETX-202A FROM R1.67): This attribute defines the supported colors for devices that support priority m…	Bitsr/w Enumerated Values: 0 green 1 yellow 2 red	.1.3.6.1.4.1.164.6.3.12.1.6
markingProfileDeiAware This attribute defines the DEI usage. aware - Profile include DEI mapping - setting the DEI according to its color, map each priority to specific DEI notAware - Profile doesn't include DEI mapping. alwaysGree…	Enumerationr/w Enumerated Values: 1 aware 2 notAware 3 alwaysGreen 4 alwaysYellow 5 byPolicer	.1.3.6.1.4.1.164.6.3.12.1.7
markingProfileDeiColor This attribute defines the DEI bit value that is assigned for each frame according to the markingProfileMethod value: Octet 0 corresponds to value 0 of P-bit/DSCP/TOS/IP Precedence. Octet 1 corresponds to…	OctetStringr/w Constraints: range: 192-192	.1.3.6.1.4.1.164.6.3.12.1.8
markingProfileDscpColor The input DSCP value marked according to the policer color. The first 64 octets are for frames that their policer color is Green (octets 0-63 correspond to input DSCP values 0-63). The next 64 octets are …	OctetStringr/w Constraints: range: 128-128	.1.3.6.1.4.1.164.6.3.12.1.9
markingProfileMarkedField This attribute indicates which field in the outgoing frame is modified by this profile. The values userPorts(6) and internalCos(7) are not applicable for this object.	ProfileMethodr/w Type Values: 2 ieee802dot1p 3 tos 4 dscp 5 ipPrecedence 6 userPorts 7 internalCos 8 dei	.1.3.6.1.4.1.164.6.3.12.1.10

This table holds WRED(Weighted Random Early Detection/Discard)
profiles.

wredProfileEntry row .1.3.6.1.4.1.164.6.3.13.1

An entry in the WRED profile Table.

Indexes

wredProfileIndex wredProfileColor

Column	Syntax	OID
wredProfileIndex Defines the WRED Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.13.1.1
wredProfileColor Defines the color of the packets that their WRED thresholds are defined in this profile.	Enumeration Enumerated Values: 2 green 3 yellow 4 red	.1.3.6.1.4.1.164.6.3.13.1.2
wredProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.13.1.3
wredProfileName This attribute defines the unique name assigned to the WRED profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.13.1.4
wredProfileMinThreshold This attribute determines the queue usage minimum threshold in percent. Above it the packets colored yellow will start being dropped by the WRED (Weighted Random Early Detection/Discard) mechanism.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.13.1.5
wredProfileMaxThreshold This attribute determines the queue usage maximum threshold in percent. Above it shaper mechanism stops dropping randomly, and just drops all further packets marked as yellow.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.13.1.6
wredProfileMaxProbability This attribute determines the percentage of packets to be dropped at the point when the queue usage reaches wredProfileMaxThreshold. The behavior is linear, so that up to wredProfileMinThreshold no packets are dropped (…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.13.1.7

Service Virtual Interface (SVI) Table.
          
This table holds SVI specific parameters and is augmenting the
generic attributes of the IF-MIB.

sviEntry row .1.3.6.1.4.1.164.6.3.14.1

An entry in the SVI Table.

An entry is automatically created by the agent when a new SVI is
defined in the ifCreateTable.

Indexes

sviIndex

Column	Syntax	OID
sviIndex This object indicates the SVI index. Its value is equal to the ifIndex of the associated entry in the ifTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.164.6.3.14.1.1
sviBoundToType Holds the type of the SVI according to the service it is bounded to.	Enumerationr/w Enumerated Values: 1 none 2 bridge 3 pw 4 router 5 twamp	.1.3.6.1.4.1.164.6.3.14.1.5

Internal Class of Service Profile table.
Each profile holds a priority method, and a mapping function
that maps the priority values (range according to the method)
into internal CoS values.

cosInternalProfileEntry row .1.3.6.1.4.1.164.6.3.15.1

A conceptual row where each row contains one Internal CoS attributes.

Indexes

cosInternalProfileIndex

Column	Syntax	OID
cosInternalProfileIndex Defines the internal CoS Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.15.1.1
cosInternalProfileRowStatus This attribute is used to create a new row or to delete an existing row in the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.15.1.2
cosInternalProfileCosMethod Defines the priority method upon Internal CoS mapping is done.	ProfileMethodr/w Type Values: 2 ieee802dot1p 3 tos 4 dscp 5 ipPrecedence 6 userPorts 7 internalCos 8 dei	.1.3.6.1.4.1.164.6.3.15.1.3
cosInternalProfileName This attribute defines the name assigned to Internal CoS profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.15.1.4
cosInternalProfileCosMapping This attribute defines the value of the Internal CoS that is assigned for each priority. The number of the valid octets depends upon the priority method selected: Octet 0 corresponds to priority = 0 Octet 1 corresponds …	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.164.6.3.15.1.5
cosInternalProfileUntaggedMapping This attribute defines the CoS mapping of untagged frames. This object is relevant only when cosInternalProfileCosMethod is set to ieee802dot1p(2).	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.15.1.6
cosInternalProfileNonIpMapping This attribute defines the CoS mapping of non-IP packets. This object is relevant only when cosInternalProfileCosMethod is set to dscp(4).	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.15.1.7

Color Mapping Profile table.
Each profile holds a priority method and a mapping function
that maps the priority values (range according to the method)
into color code values.

colorMappingProfileEntry row .1.3.6.1.4.1.164.6.3.16.1

The table entry.

Indexes

colorMappingProfileIndex

Column	Syntax	OID
colorMappingProfileIndex Defines the Color Mapping Profile ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.16.1.1
colorMappingProfileRowStatus Table row status. It is based on the standard RowStatus definition of RFC2579.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.16.1.2
colorMappingProfileMethod Defines the priority method upon Color Mapping is done.	ProfileMethodr/w Type Values: 2 ieee802dot1p 3 tos 4 dscp 5 ipPrecedence 6 userPorts 7 internalCos 8 dei	.1.3.6.1.4.1.164.6.3.16.1.3
colorMappingProfileName This attribute defines the name assigned to Color Mapping profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.16.1.4
colorMappingProfileMapping This attribute defines the value of the color that is assigned for each priority: - green (0) - yellow (1) The number of the valid octets depends on the priority method selected: Octet 0 corresponds to priority = 0 Oct…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.164.6.3.16.1.5

This table contains a list of classifiers used at the port level.
          
The port classifiers are also called Advanced ACLs (A2CL).

portClassifierEntry row .1.3.6.1.4.1.164.6.3.17.2.1

An entry in port classifier table.

A row can be deleted unconditionally.

When a row is deleted all the corresponding rows in the
portClassifierActionTable, portClassifierCommentTable and
portCl…

Indexes

IF-MIBifIndex

Column	Syntax	OID
portClassifierRowStatus This object enables creation and deletion of port classifiers.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.17.2.1.1
portClassifierNumberOfActions The number of actions (entries) for this interface in the portClassifierActionTable. The initial value is zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.2.1.2
portClassifierHighSequenceNumber The highest used sequence number for this interface in the portClassifierActionTable and portClassifierCommentTable. This number is updated upon row activation/deletion at the portClassifierActionTable an…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.2.1.3
portClassifierResequenceCmd Resequence command, specifying step between sequence numbers. For example, when resequence command with value of 100 is given, new sequence numbers shall be 100 200 300 400 etc. Possible Set values - 1..10000. …	Unsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.164.6.3.17.2.1.4

This table contains a list of port classifier rules (ACL rules).
A rule has a match or drop action.

portClassifierActionEntry row .1.3.6.1.4.1.164.6.3.17.3.1

An entry in the port classifier rules table.

When a row is created/deleted , a corresponding row (where
portClassifierInvSequenceNumber equals portClassifierActionSequenceNumber)
is automatically created/de…

Indexes

IF-MIBifIndex portClassifierActionIndex

Column	Syntax	OID
portClassifierActionIndex A running number for the port classifier rules.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.3.1.1
portClassifierActionRowStatus This object enables creation and deletion of port classifiers rules.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.17.3.1.2
portClassifierActionSequenceNumber The sequence number (priority) of the rule. It must be unique across all rows of this table and of portClassifierCommentTable. The default value is portClassifierHighSequenceNumber plus 10.	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.164.6.3.17.3.1.3
portClassifierActionType The type of the action.	Enumerationr/w Enumerated Values: 1 match 2 drop	.1.3.6.1.4.1.164.6.3.17.3.1.4
portClassifierActionFlowName The name of the associated flow. When the portClassifierActionType is match(1), the name cannot be a null string. When the portClassifierActionType is drop(2), the name can only be a null string.	OctetStringr/w Constraints: range: 0-252	.1.3.6.1.4.1.164.6.3.17.3.1.5
portClassifierActionFlowIndex1 The value of rad.flowIdx1 of the associated flow. If the associated flow does not exist, zero is returned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.3.1.6
portClassifierActionFlowIndex2 The value of rad.flowIdx2 of the associated flow. If the associated flow does not exist, zero is returned.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.3.1.7
portClassifierActionCos The CoS assigned to the rule. A value of 255 means the CoS mapping profile of portClassifierActionCosMapProfile is used instead of this object. No CoS is assigned to the rule when {portClas…	Unsigned32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.164.6.3.17.3.1.8
portClassifierActionCosMapProfile The profile used to map frames that match the rule to CoS value. The configured value is the index of the corresponding entry in cosInternalProfileTable. A value of zero means a fixed CoS p…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.3.1.9
portClassifierActionHits The number of incoming frames that matched the rule. This counter counts forwarded or dropped frames i.e. regardless of the value of portClassifierActionType.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.164.6.3.17.3.1.10
portClassifierActionCriteria The criteria for matching incoming frames. Several fields may be selected at once. However, no more than one of the fields tos(9), dscp(10) and ipPrecedence(11) can be selected at a time (mutual exclusion…	Bitsr/w Enumerated Values: 0 dstMacAddress 1 srcMacAddress 2 outerEtherType 3 outerVlanId 4 outerPbit 5 outerDei 6 innerEtherType 7 innerVlanId 8 innerPbit 9 tos 10 dscp 11 ipPrecedence 12 protocol 13 srcIPAddress 14 dstIPAddress 15 tcpSrcPort 16 tcpDstPort 17 udpSrcPort 18 udpDstPort 19 untagged	.1.3.6.1.4.1.164.6.3.17.3.1.11
portClassifierActionDstMacAddressLow The lowest destination MAC address to compare with in a range. The value should be lower than or equal to portClassifierActionDstMacAddressHigh. This object is relevant only when the dstMac…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.17.3.1.12
portClassifierActionDstMacAddressHigh The highest destination MAC address to compare with in a range. The value should be higher than or equal to portClassifierActionDstMacAddressLow. This object is relevant only when the dstMa…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.17.3.1.13
portClassifierActionSrcMacAddressLow The lowest source MAC address to compare with in a range. The value should be lower than or equal to portClassifierActionSrcMacAddressHigh. This object is relevant only when the srcMacAddre…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.17.3.1.14
portClassifierActionSrcMacAddressHigh The highest source MAC address to compare with in a range. The value should be higher than or equal to portClassifierActionSrcMacAddressLow. This object is relevant only when the srcMacAddr…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.164.6.3.17.3.1.15
portClassifierActionOuterEtherType The value of the EtherType of the outer VLAN to compare with. This object is relevant only when the outerEtherType(2) bit in portClassifierActionCriteria is set.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.164.6.3.17.3.1.16
portClassifierActionOuterVlanIdLow The lowest outer VLAN ID to compare with in a range. The value should be lower than or equal to portClassifierActionOuterVlanIdHigh. This object is relevant only when the outerVlanId(3) bit…	Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.164.6.3.17.3.1.17
portClassifierActionOuterVlanIdHigh The highest outer VLAN ID to compare with in a range. The value should be higher than or equal to portClassifierActionOuterVlanIdLow. This object is relevant only when the outerVlanId(3) bi…	Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.164.6.3.17.3.1.18
portClassifierActionOuterPbitLow The lowest outer P-bit value to compare with in a range. The value should be lower than or equal to portClassifierActionOuterPbitHigh. This object is relevant only when the outerPbit(4) bit…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.17.3.1.19
portClassifierActionOuterPbitHigh The highest outer P-bit value to compare with in a range. The value should be higher than or equal to portClassifierActionOuterPbitLow. This object is relevant only when the outerPbit(4) bi…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.17.3.1.20
portClassifierActionOuterDei The value of the DEI of the outer VLAN to compare with. This object is relevant only when the outerDei(5) bit in portClassifierActionCriteria is set.	Unsigned32r/w Constraints: range: 0-1	.1.3.6.1.4.1.164.6.3.17.3.1.21
portClassifierActionInnerEtherType The value of the EtherType of the inner VLAN to compare with. This object is relevant only when the innerEtherType(6) bit in portClassifierActionCriteria is set.	OctetStringr/w Constraints: range: 2-2	.1.3.6.1.4.1.164.6.3.17.3.1.22
portClassifierActionInnerVlanIdLow The lowest inner VLAN ID to compare with in a range. The value should be lower than or equal to portClassifierActionInnerVlanIdHigh. This object is relevant only when the innerVlanId(7) bit…	Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.164.6.3.17.3.1.23
portClassifierActionInnerVlanIdHigh The highest inner VLAN ID to compare with in a range. The value should be higher than or equal to portClassifierActionInnerVlanIdLow. This object is relevant only when the innerVlanId(7) bi…	Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.164.6.3.17.3.1.24
portClassifierActionInnerPbitLow The lowest inner P-bit value to compare with in a range. The value should be lower than or equal to portClassifierActionInnerPbitHigh. This object is relevant only when the innerPbit(8) bit…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.17.3.1.25
portClassifierActionInnerPbitHigh The highest inner P-bit value to compare with in a range. The value should be higher than or equal to portClassifierActionInnerPbitLow. This object is relevant only when the innerPbit(8) bi…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.164.6.3.17.3.1.26
portClassifierActionTosLow The lowest IP TOS/DSCP/Precedence value to compare with in a range. The value should be lower than or equal to portClassifierActionTosHigh. This object is relevant only when the tos(9) bit,…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.164.6.3.17.3.1.27
portClassifierActionTosHigh The highest IP TOS/DSCP/Precedence value to compare with in a range. The value should be higher than or equal to portClassifierActionTosLow. This object is relevant only when the tos(9) bit…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.164.6.3.17.3.1.28
portClassifierActionProtocol The value of the Protocol field of the IPv4 header or the Next Header field of IPv6 header to compare with. This object is relevant only when the protocol(12) bit in portClassifierActionCriteria is set.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.164.6.3.17.3.1.29
portClassifierActionSrcIPAddressType The type of the source IP address of portClassifierActionSrcIPAddress. This object is relevant only when the srcIPAddress(13) bit in portClassifierActionCriteria is set.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.6.3.17.3.1.30
portClassifierActionSrcIPAddress The IP address to match against the packet's source IP address. The type of this address is determined by the value of portClassifierActionSrcIPAddressType. This object is relevant only when the srcIPAddr…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.17.3.1.31
portClassifierActionSrcIPAddressPrefixLength The length of the CIDR Prefix carried in portClassifierActionSrcIPAddress. This object is relevant only when the srcIPAddress(13) bit in portClassifierActionCriteria is set.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.164.6.3.17.3.1.32
portClassifierActionDstIPAddressType The type of the destination IP address of portClassifierActionDstIPAddress. This object is relevant only when the dstIPAddress(14) bit in portClassifierActionCriteria is set.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.164.6.3.17.3.1.33
portClassifierActionDstIPAddress The IP address to match against the packet's destination IP address. The type of this address is determined by the value of portClassifierActionDstIPAddressType. This object is relevant only when the dstI…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.164.6.3.17.3.1.34
portClassifierActionDstIPAddressPrefixLength The length of the CIDR Prefix carried in portClassifierActionDstIPAddress. This object is relevant only when the dstIPAddress(14) bit in portClassifierActionCriteria is set.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.164.6.3.17.3.1.35
portClassifierActionTcpSrcPortLow The lowest TCP source port number to compare with in a range. The value should be lower than or equal to portClassifierActionTcpSrcPortHigh. This object is relevant only when the tcpSrcPort…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.36
portClassifierActionTcpSrcPortHigh The highest TCP source port number to compare with in a range. The value should be higher than or equal to portClassifierActionTcpSrcPortLow. This object is relevant only when the tcpSrcPor…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.37
portClassifierActionTcpDstPortLow The lowest TCP destination port number to compare with in a range. The value should be lower than or equal to portClassifierActionTcpDstPortHigh. This object is relevant only when the tcpDs…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.38
portClassifierActionTcpDstPortHigh The highest TCP destination port number to compare with in a range. The value should be higher than or equal to portClassifierActionTcpDstPortLow. This object is relevant only when the tcpD…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.39
portClassifierActionUdpSrcPortLow The lowest UDP source port number to compare with in a range. The value should be lower than or equal to portClassifierActionUdpSrcPortHigh. This object is relevant only when the udpSrcPort…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.40
portClassifierActionUdpSrcPortHigh The highest UDP source port number to compare with in a range. The value should be higher than or equal to portClassifierActionUdpSrcPortLow. This object is relevant only when the udpSrcPor…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.41
portClassifierActionUdpDstPortLow The lowest UDP destination port number to compare with in a range. The value should be lower than or equal to portClassifierActionUdpDstPortHigh. This object is relevant only when the udpDs…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.42
portClassifierActionUdpDstPortHigh The highest UDP destination port number to compare with in a range. The value should be higher than or equal to portClassifierActionUdpDstPortLow. This object is relevant only when the udpD…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.164.6.3.17.3.1.43

This table contains a list of port classifier comments (ACL coments).

portClassifierCommentEntry row .1.3.6.1.4.1.164.6.3.17.4.1

An entry in the port classifier comments table.

When a row is created/deleted , a corresponding row (where
portClassifierInvSequenceNumber equals portClassifierCommentSequenceNumber)
is automatically create…

Indexes

IF-MIBifIndex portClassifierCommentIndex

Column	Syntax	OID
portClassifierCommentIndex A running number for the port classifier comments.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.4.1.1
portClassifierCommentRowStatus This object enables creation and deletion of port classifiers comments.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.164.6.3.17.4.1.2
portClassifierCommentSequenceNumber The sequence number (priority) of the comment. It must be unique across all rows of this table and of portClassifierActionTable. The default value is portClassifierHighSequenceNumber plus 1…	Unsigned32r/w Constraints: range: 1-4294967295	.1.3.6.1.4.1.164.6.3.17.4.1.3
portClassifierCommentDescr Free text describing the following rules.	OctetStringr/w Constraints: range: 1-252	.1.3.6.1.4.1.164.6.3.17.4.1.4

This read-only table contains a list of port classifier actions and
comments. The list is sorted by sequence number.

portClassifierInvEntry row .1.3.6.1.4.1.164.6.3.17.5.1

An entry in port classifier inverse table.

A row is autonatically created/deleted when a row is activated/deleted
at the portClassifierActionTable or at the portClassifierCommentTable.

When a r…

Indexes

IF-MIBifIndex portClassifierInvSequenceNumber

Column	Syntax	OID
portClassifierInvSequenceNumber The sequence number (priority) of the rule or comment.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.5.1.1
portClassifierInvType Indicates the origin table of the entry: action(1) - portClassifierActionTable comment(2) - portClassifierCommentTable .	Enumeration Enumerated Values: 1 action 2 comment	.1.3.6.1.4.1.164.6.3.17.5.1.2
portClassifierInvPointer The running index at the origin table per portClassifierInvType.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.164.6.3.17.5.1.3