markingSpVlanPBit

This attribute defines the value of the SP VLAN P-bit that is assigned
for each frame according to the value of markingProfileMethod parameter :
              
Octet 0 corresponds to value 0 of  P-bit/DSCP/TOS/IP Precedence.
Octet 1 corresponds to value 1 of  P-bit/DSCP/TOS/IP Precedence.
...
Octet 7 corresponds to value 7 of  P-bit/DSCP/TOS/IP Precedence.
Octets 8-63 correspond to DSCP values 8-63.
              
For products that support priority marking according to the policer
color (e.g ETX 202A from V1.67):
              
The first 64 octets will be supported for frames that their policer
color is green (according to markingProfileColorAware) as defined above.
              
Additional 64 octets will be supported for frames that their policer
color is Yellow (according to markingProfileColorAware) as follows:
Octet 64 corresponds to value 0 of P-bit/DSCP/TOS/IP Precedence.
Octet 65 corresponds to value 1 of P-bit/DSCP/TOS/IP Precedence.
...
Octet 71 corresponds to value 7 of P-bit-yellow/DSCP/TOS/IP Precedence.
Octets 72-127 correspond to DSCP values 8-63.
              
Additional 64 octets will be supported for frames that their policer
color is Red:
Octet 128 corresponds to value 0 of P-bit/DSCP/TOS/IP Precedence.
Octet 129 corresponds to value 1 of P-bit/DSCP/TOS/IP Precedence.
...
Octet 135 corresponds to value 7 of P-bit-yellow/DSCP/TOS/IP Precedence.
Octets 136-191 correspond to DSCP values 8-63.
              
Parameter length will be according to markingProfileColorAware
parameter.
If no color is supported for the specific profile ,the length will be
64 octets.
If the Green and Yellow colors are supported then the length is 128.
If Red color is supported ,the length will be 192 octets.
Therefore markingProfileColorAware should be configured before this
parameter, and cannot be changed per profile.

MIB

RAD-Services-MIB

OID

.1.3.6.1.4.1.164.6.3.12.1.4

Type

column

Access

readwrite

Status

current

Parent

markingProfileEntry