PW-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

pwTable

table

.1.3.6.1.2.1.10.246.1.2 · 1 row entry · 48 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwTable'

This table specifies information for configuring and
status monitoring that is common to all service types
and PSN types.

pwEntry row .1.3.6.1.2.1.10.246.1.2.1

A row in this table represents a pseudowire (PW) virtual
connection across a packet network. It is indexed by
pwIndex, which uniquely identifies a singular
connection.
A row can be created by an operator command from a…

Indexes

pwIndex

Column Syntax OID

pwIndex

A unique index for the conceptual row identifying a PW within
this table.

PW-TC-STD-MIBPwIndexType

Type Constraints:
range: 1..4294967295

.1.3.6.1.2.1.10.246.1.2.1.1

pwType

This value indicates the emulated service to be carried over
this PW.

IANA-PWE3-MIBIANAPwTypeTCr/w

Type Values:

0	other
1	frameRelayDlciMartiniMode
2	atmAal5SduVcc
3	atmTransparent
4	ethernetTagged
5	ethernet
6	hdlc
7	ppp
8	cem
9	atmCellNto1Vcc
10	atmCellNto1Vpc
11	ipLayer2Transport
12	atmCell1to1Vcc
13	atmCell1to1Vpc
14	atmAal5PduVcc
15	frameRelayPortMode
16	cep
17	e1Satop
18	t1Satop
19	e3Satop
20	t3Satop
21	basicCesPsn
22	basicTdmIp
23	tdmCasCesPsn
24	tdmCasTdmIp
25	frDlci
32767	wildcard

.1.3.6.1.2.1.10.246.1.2.1.2

pwOwner

This object is set by the operator to indicate the protocol
responsible for establishing this PW.
'manual' is used in all cases where no maintenance
protocol (PW signaling) is used to set up the PW, i.e.,
configuration …

Enumerationr/w

Enumerated Values:

1	manual
2	pwIdFecSignaling
3	genFecSignaling
4	l2tpControlProtocol
5	other

.1.3.6.1.2.1.10.246.1.2.1.3

pwPsnType

This object is set by the operator to indicate the PSN type.
Based on this object, the relevant PSN table's entry is
created in the PSN-specific MIB modules.

IANA-PWE3-MIBIANAPwPsnTypeTCr/w

Type Values:

1	mpls
2	l2tp
3	udpOverIp
4	mplsOverIp
5	mplsOverGre
6	other

.1.3.6.1.2.1.10.246.1.2.1.4

pwSetUpPriority

This object defines the relative priority of the PW
during set-up in a lowest-to-highest fashion, where 0
is the highest priority. PWs with the same priority
are treated with equal priority. PWs that have not yet
…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.2.1.10.246.1.2.1.5

pwHoldingPriority

This object defines the relative holding priority of the
PW in a lowest-to-highest fashion, where 0 is the highest
priority. PWs with the same priority are treated equally.
This value is significant if there are compet…

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.2.1.10.246.1.2.1.6

pwPeerAddrType

Denotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.2.1.10.246.1.2.1.8

pwPeerAddr

This object contains the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(pwPeerAddrType is 'unknown').

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.9

pwAttachedPwIndex

If the PW is attached to another PW instead of a local
native service, this item indicates the pwIndex of the
attached PW. Otherwise, this object MUST
be set to zero. Attachment to another PW will have no
PW specific …

PW-TC-STD-MIBPwIndexOrZeroTyper/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.10

pwIfIndex

This object indicates the ifIndex of the PW if the PW is
represented in the ifTable. Otherwise, it MUST be set
to zero.

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.2.1.10.246.1.2.1.11

pwID

Pseudowire identifier.

If the pwOwner object is 'pwIdFecSignaling' or
'l2tpControlProtocol', then this object is signaled in the
outgoing PW ID field within the 'Virtual Circuit FEC
Element'. For other v…

PW-TC-STD-MIBPwIDTyper/w

.1.3.6.1.2.1.10.246.1.2.1.12

pwLocalGroupID

Used in the Group ID field sent to the peer PW End Service
within the maintenance protocol used for PW setup.
It SHOULD be set to zero if a maintenance protocol is
not used.

PW-TC-STD-MIBPwGroupIDr/w

.1.3.6.1.2.1.10.246.1.2.1.13

pwGroupAttachmentID

This object is an octet string representing the attachment
group identifier (AGI) that this PW belongs to, which
typically identifies the VPN ID.
Applicable if pwOwner equals 'genFecSignaling'.

PW-TC-STD-MIBPwAttachmentIdentifierTyper/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.14

pwLocalAttachmentID

This object is an octet string representing the local
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the Source AII (SAII) for
outgoing signaling messages and the Target AII (TAII…

PW-TC-STD-MIBPwAttachmentIdentifierTyper/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.15

pwRemoteAttachmentID

This object is an octet string representing the remote
forwarder attachment individual identifier (AII) to be
used by this PW. It is used as the TAII for outgoing
signaling messages and the SAII in the incoming message…

PW-TC-STD-MIBPwAttachmentIdentifierTyper/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.16

pwCwPreference

Defines if the control word will be sent with each packet
by the local node. Some PW types mandate the use of a
control word, and in such cases, the value configured for
this object has no effect on the existence of th…

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.2.1.10.246.1.2.1.17

pwLocalIfMtu

If not equal to zero, the optional IfMtu object in the
signaling protocol will be sent with this value, which
represents the locally supported MTU size over the
interface (or the virtual interface) associated with the
P…

Unsigned32r/w

Constraints:
range: 0-65535

.1.3.6.1.2.1.10.246.1.2.1.18

pwLocalIfString

A PW MAY be associated to an interface (or a virtual
interface) in the ifTable of the node as part of the
service configuration. This object defines if the
maintenance protocol will send the interface's name
(ifAlias) …

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.2.1.10.246.1.2.1.19

pwLocalCapabAdvert

If a maintenance protocol is used, it indicates the
capabilities the local node will advertise to the peer. The
operator MAY selectively assign a partial set of
capabilities. In case of manual configuration of the PW,…

IANA-PWE3-MIBIANAPwCapabilitiesr/w

Type Values:

0	pwStatusIndication
1	pwVCCV

.1.3.6.1.2.1.10.246.1.2.1.20

pwRemoteGroupID

This object is obtained from the Group ID field as
received via the maintenance protocol used for PW setup.
Value of zero will be reported if not used.
Value of 0xFFFFFFFF shall be used if the object is yet to be
define…

PW-TC-STD-MIBPwGroupID

.1.3.6.1.2.1.10.246.1.2.1.21

pwCwStatus

If signaling is used for PW establishment, this object
indicates the status of the control word negotiation.
For either signaling or manual configuration, it indicates
if the control word (CW) is to be present for this …

PW-TC-STD-MIBPwCwStatusTC

Type Values:

1	waitingForNextMsg
2	sentWrongBitErrorCode
3	rxWithdrawWithWrongBitErrorCode
4	illegalReceivedBit
5	cwPresent
6	cwNotPresent
7	notYetKnown

.1.3.6.1.2.1.10.246.1.2.1.22

pwRemoteIfMtu

The remote interface MTU as (optionally) received from the
remote node via the maintenance protocol. The object SHOULD
report zero if the MTU is not available.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.23

pwRemoteIfString

Indicates the interface description string as received by
the maintenance protocol. It MUST be a NULL string if a
maintenance protocol is not used or the value is not known
yet.

OctetString

Constraints:
range: 0-80

.1.3.6.1.2.1.10.246.1.2.1.24

pwRemoteCapabilities

Indicates the capabilities as received from the peer.

IANA-PWE3-MIBIANAPwCapabilities

Type Values:

0	pwStatusIndication
1	pwVCCV

.1.3.6.1.2.1.10.246.1.2.1.25

pwFragmentCfgSize

If set to a value other than zero, indicates that
fragmentation is desired for this PW.
This object MAY be changed only if the PW is not active.

bytesPW-TC-STD-MIBPwFragSizer/w

.1.3.6.1.2.1.10.246.1.2.1.26

pwRmtFragCapability

The status of the fragmentation based on the local
configuration and the peer capabilities as received from
the peer when a control protocol is used.

PW-TC-STD-MIBPwFragStatus

Type Values:

0	noFrag
1	cfgFragGreaterThanPsnMtu
2	cfgFragButRemoteIncapable
3	remoteFragCapable
4	fragEnabled

.1.3.6.1.2.1.10.246.1.2.1.27

pwFcsRetentionCfg

The local configuration of Frame Check Sequence (FCS)
retention for this PW. FCS retention can be configured for
PW types High-Level Data Link Control (HDLC), Point-to-Point
Protocol (PPP), and Ethernet only. If the i…

Enumerationr/w

Enumerated Values:

1	fcsRetentionDisable
2	fcsRetentionEnable

.1.3.6.1.2.1.10.246.1.2.1.28

pwFcsRetentionStatus

The status of the FCS retention negotiation process based on
local configuration and the remote advertisement.

remoteIndicationUnknown - set if a FEC has not been received
from the remote.
…

Bits

Enumerated Values:

0	remoteIndicationUnknown
1	remoteRequestFcsRetention
2	fcsRetentionEnabled
3	fcsRetentionDisabled
4	localFcsRetentionCfgErr
5	fcsRetentionFcsSizeMismatch

.1.3.6.1.2.1.10.246.1.2.1.29

pwOutboundLabel

The PW label used in the outbound direction (i.e., toward
the PSN). It might be set manually if pwOwner is 'manual';
otherwise, it is set automatically.
For MPLS, MPLS over IP, or MPLS over Generic Routing
Encapsulatio…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.30

pwInboundLabel

The PW label used in the inbound direction (i.e., packets
received from the PSN). It may be set manually if pwOwner
is 'manual'; otherwise, it is set automatically.
For MPLS, MPLS over IP, or MPLS over GRE PSN, it repr…

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.31

pwName

The canonical name assigned to the PW. This object MAY be
changed at any time.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.32

pwDescr

A textual string containing information about the PW.
If there is no description, this object contains a zero-
length string. This object MAY be changed at any time.

SNMP-FRAMEWORK-MIBSnmpAdminStringr/w

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.2.1.33

pwCreateTime

The value of sysUpTime at the time this PW was created.

SNMPv2-TCTimeStamp

Based On: SNMPv2-SMITimeTicks

Description:

The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…

.1.3.6.1.2.1.10.246.1.2.1.34

pwUpTime

Specifies the time since last change of pwOperStatus to
Up(1).

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.35

pwLastChange

The value of sysUpTime at the time the PW entered
its current operational state. If the current state was
entered prior to the last re-initialization of the local
network management subsystem, then this object contains…

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.10.246.1.2.1.36

pwAdminStatus

The desired operational status of this PW. This object MAY
be set at any time.

Enumerationr/w

Enumerated Values:

1	up
2	down
3	testing

.1.3.6.1.2.1.10.246.1.2.1.37

pwOperStatus

This object indicates the operational status of the PW; it
does not reflect the status of the Customer Edge (CE) bound
interface. It is set to down only if pwNotForwarding,
psnFacingPwRxFault, or psnFacingPwTxFault ind…

PW-TC-STD-MIBPwOperStatusTC

Type Values:

1	up
2	down
3	testing
4	dormant
5	notPresent
6	lowerLayerDown

.1.3.6.1.2.1.10.246.1.2.1.38

pwLocalStatus

Indicates the status of the PW in the local node.
The various indications in this object SHOULD be
available independent of the ability of the local node to
advertise them or the remote node to accept these status
indic…

PW-TC-STD-MIBPwStatus

Type Values:

0	pwNotForwarding
1	servicePwRxFault
2	servicePwTxFault
3	psnPwRxFault
4	psnPwTxFault

.1.3.6.1.2.1.10.246.1.2.1.39

pwRemoteStatusCapable

Indicates the remote node capability to advertise the
PW status notification.
notApplicable SHOULD be reported for a manually set PW, or
if the local node is not capable of accepting the status
notification object.
notY…

Enumeration

Enumerated Values:

1	notApplicable
2	notYetKnown
3	remoteCapable
4	remoteNotCapable

.1.3.6.1.2.1.10.246.1.2.1.40

pwRemoteStatus

Indicates the status of the PW as was advertised by the
remote. If the remote is not capable of advertising the
status object, or the local node is not able to accept
the status object through signaling, then the appli…

PW-TC-STD-MIBPwStatus

Type Values:

0	pwNotForwarding
1	servicePwRxFault
2	servicePwTxFault
3	psnPwRxFault
4	psnPwTxFault

.1.3.6.1.2.1.10.246.1.2.1.41

pwTimeElapsed

The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
interval measurement period.

HC-PerfHist-TC-MIBHCPerfTimeElapsed

Type Constraints:
range: 0..86399

.1.3.6.1.2.1.10.246.1.2.1.42

pwValidIntervals

The number of previous 15-minute intervals
for which data was collected.

HC-PerfHist-TC-MIBHCPerfValidIntervals

Type Constraints:
range: 0..96

.1.3.6.1.2.1.10.246.1.2.1.43

pwRowStatus

For creating, modifying, and deleting this row.
This object MAY be changed at any time.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.2.1.10.246.1.2.1.44

pwStorageType

This variable indicates the storage type for this
object.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.2.1.10.246.1.2.1.45

pwOamEnable

This variable indicates if OAM is enabled for this
PW. It MAY be changed at any time.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.2.1.10.246.1.2.1.46

pwGenAGIType

This variable indicates the AGI type if generalized FEC
(129) is used for PW signaling or configuration. It SHOULD
return the value of zero otherwise.

PW-TC-STD-MIBPwGenIdTyper/w

Type Constraints:
range: 0..254

.1.3.6.1.2.1.10.246.1.2.1.47

pwGenLocalAIIType

This object is the type of the local forwarder
attachment individual identifier (AII) to be used
by this PW if generalized FEC (129) is used for PW
signaling or configuration.

PW-TC-STD-MIBPwGenIdTyper/w

Type Constraints:
range: 0..254

.1.3.6.1.2.1.10.246.1.2.1.48

pwGenRemoteAIIType

This object is the type of the remote forwarder
attachment individual identifier (AII) to be used
by this PW if generalized FEC (129) is used for PW
signaling or configuration.

PW-TC-STD-MIBPwGenIdTyper/w

Type Constraints:
range: 0..254

.1.3.6.1.2.1.10.246.1.2.1.49

pwPerfCurrentTable

table

.1.3.6.1.2.1.10.246.1.3 · 1 row entry · 8 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwPerfCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwPerfCurrentTable'

This table provides per-PW performance information for
the current interval.

pwPerfCurrentEntry row .1.3.6.1.2.1.10.246.1.3.1

An entry in this table is created by the agent for
every PW.

Indexes

pwIndex

Column	Syntax	OID
pwPerfCurrentInHCPackets High-capacity counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInPackets, if pwPerfCurrentInHCPackets is supported according …	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.1`
pwPerfCurrentInHCBytes High-capacity counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentInBytes, if pwPerfCurrentInHCBytes is supported according to the …	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.2`
pwPerfCurrentOutHCPackets High-capacity counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutPackets, if pwPerfCurrentOutHCPackets is supported according …	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.3`
pwPerfCurrentOutHCBytes High-capacity counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. This is the 64-bit version of pwPerfCurrentOutBytes, if pwPerfCurrentOutHCBytes is supported according to the…	HC-PerfHist-TC-MIBHCPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.4`
pwPerfCurrentInPackets The counter for number of packets received by the PW (from the PSN) in the current 15-minute interval. This is the 32-bit version of pwPerfCurrentInHCPackets, if pwPerfCurrentInHCPackets is supported according to the ru…	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.5`
pwPerfCurrentInBytes The counter for number of bytes received by the PW (from the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentInHCBytes, if pwPerfCurrentInHCBytes is supported ac…	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.6`
pwPerfCurrentOutPackets The counter for number of packets forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentOutHCPackets, if pwPerfCurrentOutHCPackets is suppo…	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.7`
pwPerfCurrentOutBytes The counter for number of bytes forwarded by the PW (to the PSN) in the current 15-minute interval. It MUST be equal to the least significant 32 bits of pwPerfCurrentOutHCBytes, if pwPerfCurrentOutHCBytes is supported a…	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.2.1.10.246.1.3.1.8`

pwPerfIntervalTable

table

.1.3.6.1.2.1.10.246.1.4 · 1 row entry · 11 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwPerfIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwPerfIntervalTable'

This table provides per-PW performance information for
each interval.

pwPerfIntervalEntry row .1.3.6.1.2.1.10.246.1.4.1

An entry in this table is created by the agent for every
PW.

Indexes

pwIndex pwPerfIntervalNumber

Column Syntax OID

pwPerfIntervalNumber

A number N, between 1 and 96, which identifies the
interval for which the set of statistics is available.
The interval identified by 1 is the most recently
completed 15-minute interval, and the interval identified
by N …

Integer32

Constraints:
range: 1-96

.1.3.6.1.2.1.10.246.1.4.1.1

pwPerfIntervalValidData

This variable indicates if the data for this interval
is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.2.1.10.246.1.4.1.2

pwPerfIntervalTimeElapsed

The duration of this interval in seconds.

HC-PerfHist-TC-MIBHCPerfTimeElapsed

Type Constraints:
range: 0..86399

.1.3.6.1.2.1.10.246.1.4.1.3

pwPerfIntervalInHCPackets

High-capacity counter for number of packets received by
the PW (from the PSN) during the interval. This is the
64-bit version of pwPerfIntervalInPackets, if
pwPerfIntervalInHCPackets is supported according to the
rules…

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.4

pwPerfIntervalInHCBytes

High-capacity counter for number of bytes received by the
PW (from the PSN) during the interval.
This is the 64-bit version of pwPerfIntervalInBytes, if
pwPerfIntervalInHCBytes is supported according to the
rules spelle…

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.5

pwPerfIntervalOutHCPackets

High-capacity counter for number of packets forwarded by
the PW (to the PSN) during the interval.
This is the 64-bit version of pwPerfIntervalOutPackets,
if pwPerfIntervalOutHCPackets is supported according to
the rules…

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.6

pwPerfIntervalOutHCBytes

High-capacity counter for number of bytes forwarded by
the PW (to the PSN) during the interval.
This is the 64-bit version of pwPerfIntervalOutBytes,
if pwPerfIntervalOutHCBytes is supported according to
the rules spell…

HC-PerfHist-TC-MIBHCPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.7

pwPerfIntervalInPackets

This value represents the number of packets received
by this PW during the interval.
It MUST be equal to the least significant 32 bits of
pwPerfIntervalInHCPackets, if pwPerfIntervalInHCPackets
is supported according to…

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.8

pwPerfIntervalInBytes

This value represents the number of bytes received by
this PW during the interval. It MUST be equal to the
least significant 32 bits of pwPerfIntervalInHCBytes, if
pwPerfIntervalInHCBytes is supported according to the
…

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.9

pwPerfIntervalOutPackets

This value represents the number of packets sent by this
PW during the interval.
It MUST be equal to the least significant 32 bits of
pwPerfIntervalOutHCPackets, if
pwPerfIntervalOutHCPackets is supported according to t…

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.10

pwPerfIntervalOutBytes

This value represents the number of bytes sent by this
PW during the interval.
It MUST be equal to the least significant 32
bits of pwPerfIntervalOutHCBytes,
if pwPerfIntervalOutHCBytes is supported according to
the rul…

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.2.1.10.246.1.4.1.11

pwPerf1DayIntervalTable

table

.1.3.6.1.2.1.10.246.1.5 · 1 row entry · 7 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwPerf1DayIntervalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwPerf1DayIntervalTable'

This table provides per-PW performance information for
the current day's measurement and the previous day's
          
interval.

pwPerf1DayIntervalEntry row .1.3.6.1.2.1.10.246.1.5.1

An entry in this table is created by the agent for every
PW.

Indexes

pwIndex pwPerf1DayIntervalNumber

Column Syntax OID

pwPerf1DayIntervalNumber

History Data Interval number. Interval 1 is the current day's
measurement period, interval 2 is the most recent previous
day, and interval 30 is 31 days ago. Intervals 3..31 are
optional.

Unsigned32

Constraints:
range: 1-31

.1.3.6.1.2.1.10.246.1.5.1.1

pwPerf1DayIntervalValidData

This variable indicates if the data for this interval
is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.2.1.10.246.1.5.1.2

pwPerf1DayIntervalTimeElapsed

The number of seconds in the 1-day interval over which the
performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monitoring …

secondsHC-PerfHist-TC-MIBHCPerfTimeElapsed

Type Constraints:
range: 0..86399

.1.3.6.1.2.1.10.246.1.5.1.3

pwPerf1DayIntervalInHCPackets

High-capacity counter for the total number of packets
received by the PW (from the PSN).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.2.1.10.246.1.5.1.4

pwPerf1DayIntervalInHCBytes

High-capacity counter for the total number of bytes
received by the PW (from the PSN).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.2.1.10.246.1.5.1.5

pwPerf1DayIntervalOutHCPackets

High-capacity counter for the total number of packets
forwarded by the PW (to the PSN).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.2.1.10.246.1.5.1.6

pwPerf1DayIntervalOutHCBytes

High-capacity counter for the total number of bytes
forwarded by the PW (to the PSN).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.2.1.10.246.1.5.1.7

pwIndexMappingTable

table

.1.3.6.1.2.1.10.246.1.7 · 1 row entry · 5 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwIndexMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwIndexMappingTable'

This table enables the reverse mapping of the unique
PWid parameters [peer IP, PW type, and PW ID] and the
pwIndex.  The table is not applicable for PWs created
manually or by using the generalized FEC.

pwIndexMappingEntry row .1.3.6.1.2.1.10.246.1.7.1

An entry in this table MUST be created by the agent for
every PW created by the pwTable for which pwOwner
equals pwIdFecSignaling and pwID is not zero.

Implementers need to be aware that if the value of
the…

Indexes

pwIndexMappingPwType pwIndexMappingPwID pwIndexMappingPeerAddrType pwIndexMappingPeerAddr

Column Syntax OID

pwIndexMappingPwType

The PW type (indicates the service) of this PW.

IANA-PWE3-MIBIANAPwTypeTC

Type Values:

0	other
1	frameRelayDlciMartiniMode
2	atmAal5SduVcc
3	atmTransparent
4	ethernetTagged
5	ethernet
6	hdlc
7	ppp
8	cem
9	atmCellNto1Vcc
10	atmCellNto1Vpc
11	ipLayer2Transport
12	atmCell1to1Vcc
13	atmCell1to1Vpc
14	atmAal5PduVcc
15	frameRelayPortMode
16	cep
17	e1Satop
18	t1Satop
19	e3Satop
20	t3Satop
21	basicCesPsn
22	basicTdmIp
23	tdmCasCesPsn
24	tdmCasTdmIp
25	frDlci
32767	wildcard

.1.3.6.1.2.1.10.246.1.7.1.1

pwIndexMappingPwID

The PW ID of this PW. Zero if the PW is configured
manually.

PW-TC-STD-MIBPwIDType

.1.3.6.1.2.1.10.246.1.7.1.2

pwIndexMappingPeerAddrType

IP address type of the peer node.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.2.1.10.246.1.7.1.3

pwIndexMappingPeerAddr

IP address of the peer node.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.7.1.4

pwIndexMappingPwIndex

The value that represents the PW in the pwTable.

PW-TC-STD-MIBPwIndexType

Type Constraints:
range: 1..4294967295

.1.3.6.1.2.1.10.246.1.7.1.5

pwPeerMappingTable

table

.1.3.6.1.2.1.10.246.1.8 · 1 row entry · 5 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwPeerMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwPeerMappingTable'

This table provides reverse mapping of the existing PW
based on PW type and PW ID ordering.  This table is
typically useful for the element management system (EMS)
ordered query of existing PWs.

pwPeerMappingEntry row .1.3.6.1.2.1.10.246.1.8.1

An entry in this table is created by the agent for every
PW entry in the pwTable.

Implementers need to be aware that if the value of the
pwPeerMappingPeerAddr (an OID) has more than 113
sub-identifiers, the…

Indexes

pwPeerMappingPeerAddrType pwPeerMappingPeerAddr pwPeerMappingPwType pwPeerMappingPwID

Column Syntax OID

pwPeerMappingPeerAddrType

IP address type of the peer node.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.2.1.10.246.1.8.1.1

pwPeerMappingPeerAddr

IP address of the peer node.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.2.1.10.246.1.8.1.2

pwPeerMappingPwType

The PW type (indicates the emulated service) of this PW.

IANA-PWE3-MIBIANAPwTypeTC

Type Values:

0	other
1	frameRelayDlciMartiniMode
2	atmAal5SduVcc
3	atmTransparent
4	ethernetTagged
5	ethernet
6	hdlc
7	ppp
8	cem
9	atmCellNto1Vcc
10	atmCellNto1Vpc
11	ipLayer2Transport
12	atmCell1to1Vcc
13	atmCell1to1Vpc
14	atmAal5PduVcc
15	frameRelayPortMode
16	cep
17	e1Satop
18	t1Satop
19	e3Satop
20	t3Satop
21	basicCesPsn
22	basicTdmIp
23	tdmCasCesPsn
24	tdmCasTdmIp
25	frDlci
32767	wildcard

.1.3.6.1.2.1.10.246.1.8.1.3

pwPeerMappingPwID

The PW ID of this PW. Zero if the PW is configured
manually.

PW-TC-STD-MIBPwIDType

.1.3.6.1.2.1.10.246.1.8.1.4

pwPeerMappingPwIndex

The value that represents the PW in the pwTable.

PW-TC-STD-MIBPwIndexType

Type Constraints:
range: 1..4294967295

.1.3.6.1.2.1.10.246.1.8.1.5

pwGenFecIndexMappingTable

table

.1.3.6.1.2.1.10.246.1.12 · 1 row entry · 7 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwGenFecIndexMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-STD-MIB::pwGenFecIndexMappingTable'

This table enables the reverse mapping of the unique
PWid parameters [GroupAttachmentID, LocalAttachmentID,
and PeerAttachmentID] and the pwIndex.  The table is
only applicable for PW using the generalized FEC.

pwGenFecIndexMappingEntry row .1.3.6.1.2.1.10.246.1.12.1

An entry in this table MUST be created by the agent for
every PW created by the pwTable for which pwOwner
equals genFecSignaling.

Implementers need to be aware that if the combined value
of pwGenFecIndexMap…

Indexes

pwGenFecIndexMappingAGIType pwGenFecIndexMappingAGI pwGenFecIndexMappingLocalAIIType pwGenFecIndexMappingLocalAII pwGenFecIndexMappingRemoteAIIType pwGenFecIndexMappingRemoteAII

Column	Syntax	OID
pwGenFecIndexMappingAGIType This object is the type of the attachment group identifier (AGI) that this PW belongs to.	PW-TC-STD-MIBPwGenIdType Type Constraints: `range: 0..254`	`.1.3.6.1.2.1.10.246.1.12.1.1`
pwGenFecIndexMappingAGI This object is an octet string representing the attachment group identifier (AGI) that this PW belongs to, which typically identifies the VPN ID.	PW-TC-STD-MIBPwAttachmentIdentifierType Type Constraints: `range: 0..255`	`.1.3.6.1.2.1.10.246.1.12.1.2`
pwGenFecIndexMappingLocalAIIType This object is the type of the local forwarder attachment individual identifier (AII) to be used by this PW.	PW-TC-STD-MIBPwGenIdType Type Constraints: `range: 0..254`	`.1.3.6.1.2.1.10.246.1.12.1.3`
pwGenFecIndexMappingLocalAII This object is an octet string representing the local forwarder attachment individual identifier (AII) to be used by this PW. It is used as the SAII for outgoing signaling messages and the TAII in the incoming messages…	PW-TC-STD-MIBPwAttachmentIdentifierType Type Constraints: `range: 0..255`	`.1.3.6.1.2.1.10.246.1.12.1.4`
pwGenFecIndexMappingRemoteAIIType This object is the type of the remote forwarder attachment individual identifier (AII) to be used by this PW.	PW-TC-STD-MIBPwGenIdType Type Constraints: `range: 0..254`	`.1.3.6.1.2.1.10.246.1.12.1.5`
pwGenFecIndexMappingRemoteAII This object is an octet string representing the peer forwarder attachment individual identifier (AII) to be used by this PW. It is used as the TAII for outgoing signaling messages and the SAII in the incoming messages …	PW-TC-STD-MIBPwAttachmentIdentifierType Type Constraints: `range: 0..255`	`.1.3.6.1.2.1.10.246.1.12.1.6`
pwGenFecIndexMappingPwIndex The value that represents the PW in the pwTable.	PW-TC-STD-MIBPwIndexType Type Constraints: `range: 1..4294967295`	`.1.3.6.1.2.1.10.246.1.12.1.7`