PKTC-DECT-MIB Table View

This object represents the configuration of an end point
to support the Analog Alarm Configuration.

pktcDectAnalogAlarmCfgEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.7.1

The Conceptual row of pktcDectAnalogAlarmCfgTable.
When an endpoint instance is configured to enable the analog
Alarm Configuration, the largest POTS MDI identifier
(PktcMdiType = 'pots'') in the endpoint takes the rol…

Indexes

IF-MIBifIndex

Column	Syntax	OID
pktcDectAnalogAlarmCfgState This attribute represents alarm configuration type assigned for this analog port. The possible values are: 'none' indicates the end point has no analog alarm Configuration 'preemptive' i…	Enumerationr/w Enumerated Values: 1 none 2 preemptive 3 simultanousCalls	.1.3.6.1.4.1.4491.2.2.8.4.1.7.1.1

This object represents the list of PPs and related
identifiers. 
For debugging purposes this object lists more PPs than
the maximum number of PPs.

pktcDectPPEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.8.1

The Conceptual row of pktcDectPPTable.

Indexes

pktcDectPPId

Column	Syntax	OID
pktcDectPPId This key represents the unique identifier of the PP. The Id of PPs already registered corresponds to the interface Index associated with the PP MDI. For PPs not registered the FP selects an Id outside the range of w…	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.4491.2.2.8.4.1.8.1.1
pktcDectPPIPEI This attribute represents the International Portable Equipment Identifier of the device. Other than residential/default handset identifiers are not required.	OctetString Constraints: range: 0-5	.1.3.6.1.4.1.4491.2.2.8.4.1.8.1.2
pktcDectPPTerminalID This attribute represents the Terminal Identifier the FP assigns to the PP. For simple operation the FP may maintain the same PP Terminal Identifier from the initial Locate during pairing across device initialization.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.4491.2.2.8.4.1.8.1.3
pktcDectPPStatus This attribute represents the state of a PP as seen by the FP based on last PP/FP interaction. The FP may report only the values 'idleLocked' and activeLocked' for registered PPs. Unregistered PPs are r…	PktcDectPPState Type Values: 1 unknown 2 idleUnlocked 3 activeUnlocked 4 idleLocked 5 activeLocked 6 noFPInRange 7 waitingEasyPairing 8 easyPairingFailed 9 easyPINFailed	.1.3.6.1.4.1.4491.2.2.8.4.1.8.1.4
pktcDectPPRegCtrl This attribute provides control of the PP registration status. The value 'deregister' directs the PP to initiate the procedure to terminate PP access rights without deleting the identity of the PP in t…	Enumerationr/w Enumerated Values: 1 register 2 deregister 3 remove	.1.3.6.1.4.1.4491.2.2.8.4.1.8.1.5

This object represents the PP reported capabilities.

pktcDectPPCapabilitiesEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.9.1

The Conceptual row of pktcDectPPCapabilitiesTable.

Indexes

pktcDectPPId

Column	Syntax	OID
pktcDectPPCapabilitiesDisplay This attribute represents the PP display capability. The possible values are: 'na' : not applicable 'noDisplay': no display 'numeric': numeric characters (space, 0-9, *, #) 'numericPlus': extended numeric characters …	Enumeration Enumerated Values: 0 na 1 noDisplay 2 numeric 3 numericPlus 4 alphanumeric 5 fullDisplay	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.1
pktcDectPPCapabilitiesTone This attribute represents the PP tone capability. The possible values are: 'na': not applicable 'notone': no tone capability supported 'dialTone': dialtone supported 'e182': ITU-T E.182 tones supported 'dect': complet…	Enumeration Enumerated Values: 0 na 1 notone 2 dialTone 3 e182 4 dect	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.2
pktcDectPPCapabilitiesEcho This attribute represents the PP echo capability. The possible values are: 'na': not applicable 'minTCL': > 34 dB 'fullTCL': > 46 dB 'voip' : > 55 dB.	Enumeration Enumerated Values: 0 na 1 minTCL 2 fullTCL 3 voip	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.3
pktcDectPPCapabilitiesAmbientNoiseRejection This attribute represents the PP ambient noise rejection capability. The possible values are: 'na': not applicable 'noSupport': no noise rejection 'support': noise rejection provided.	Enumeration Enumerated Values: 0 na 1 noSupport 2 support	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.4
pktcDectPPCapabilitiesAdaptiveVolumeCtrl This attribute represents the PP adaptive volume control capability. The possible values are: 'na': not applicable 'noSupported': no adaptive volume control 'used': supported and in use 'disabled': supported not in use.	Enumeration Enumerated Values: 0 na 1 noSupported 2 used 3 disabled	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.5
pktcDectPPCapabilitiesSlotType This attribute represents the PP slot type capabilities. A bit set to '1' indicates support of the slot type, A bit set to '0' indicates no support of the slot type. Bits are numbered left to right (MSB = 0). The …	Bits Enumerated Values: 0 unused0 1 unused1 2 unused2 3 doubleSlot 4 fullSlot 5 unused5 6 unused6 7 halfSlot	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.6
pktcDectPPCapabilitiesStoredDisplayChars This attribute represents the PP number of stored display characters.	Unsigned32 Constraints: range: 0-16363	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.7
pktcDectPPCapabilitiesDisplayLines This attribute represents the number of lines in the PP display.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.8
pktcDectPPCapabilitiesCharsPerDisplayLine This attribute represents the PP number of characters per line in the display.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.9
pktcDectPPCapabilitiesScrollBehavior This attribute represents the PP scroll behavior capability. The possible values are: 'na': not applicable, specified 'type1': type 1 'type2': type 2.	Enumeration Enumerated Values: 0 na 1 type1 2 type	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.10
pktcDectPPCapabilitiesProfile This attribute represents the PP profile feature capabilities. A bit set to '1' indicates support of the specific profile feature, a bit set to '0' indicates not support of the profile feature. Bits are numbered left…	Bits Enumerated Values: 0 unused0 1 unused1 2 unused2 3 unused3 4 unused4 5 gapSupport 6 unused6 7 unused7 8 unused8 9 unused9 10 unused10 11 unused11 12 unused12 13 unused13 14 unused14 15 unused15 16 unused16 17 unused17 18 unused18 19 unused19 20 unused20 21 unused21 22 unused22 23 unused23 24 unused24 25 unused25 26 unused26 27 unused27 28 unused28 29 unused29 30 unused30 31 unused31 32 unused32 33 unused33 34 unused34 35 unused35 36 unused36 37 unused37 38 unused38 39 unused39 40 unused40 41 zeroEmissionSupport 42 unused42 43 unused43 44 unused44 45 unused45 46 unused46 47 unused47 48 unused48 49 unused49 50 multipleLlines 51 parallelCall 52 callIdentification 53 wideband 54 part3 55 unused55 56 unused56 57 unused57 58 unused58 59 unused59 60 unused60 61 unused61 62 unused62 63 unused63 64 unused64	.1.3.6.1.4.1.4491.2.2.8.4.1.9.1.11

This object represents the list of lists stored in the FP.

pktcDectListAccessEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.10.1

The Conceptual row of pktcDectListAccessTable.

Indexes

pktcDectListAccessIndex

Column	Syntax	OID
pktcDectListAccessIndex This Key represents the unique identifier of the list element.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.4491.2.2.8.4.1.10.1.1
pktcDectListAccesslistID This attribute defines the ID of the supported list.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.4491.2.2.8.4.1.10.1.2
pktcDectListAccessDescr This attribute represents the name of the list. For standard list this corresponds to the exact name as the list is referred to in the specification. Vendor specific list may include name and references to documentati…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.8.4.1.10.1.3

This object represents the list of registered PPs

pktcDectInternalNamesListEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.11.1

The Conceptual row of pktcDectInternalNamesListTable.

Indexes

pktcDectInternalNamesListIndex

Column	Syntax	OID
pktcDectInternalNamesListIndex This Key represents the unique identifier of the list element.	Unsigned32 Constraints: range: 1-32767	.1.3.6.1.4.1.4491.2.2.8.4.1.11.1.1
pktcDectInternalNamesListNumber This attribute indicates the terminal identity number.	Unsigned32 Constraints: range: 1-32767	.1.3.6.1.4.1.4491.2.2.8.4.1.11.1.2
pktcDectInternalNamesListName This attribute indicates the name of the internal party.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.8.4.1.11.1.3

This object represents Information pertaining to the list. 
Operator settings to this line are performed via the NSL object.
Primarily association of PPs to the phone line. 
A PacketCable device allows the user to modify any line 
parameter via PP access list commands with the exception of the 
'Dialing Prefix' field.

pktcDectLineSettingsListEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.12.1

The Conceptual row of pktcDectLineSettingsListTable.

Indexes

pktcDectLineSettingsListIndex

Column	Syntax	OID
pktcDectLineSettingsListIndex This Key represents the unique identifier of the list element.	Unsigned32 Constraints: range: 1-127	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.1
pktcDectLineSettingsListLineId This attribute represents the line identifier.	Unsigned32 Constraints: range: 1-127	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.2
pktcDectLineSettingsListLineName This attribute represents the name of the line.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.3
pktcDectLineSettingsListAttachedHandsets This attribute represents the list of registered handsets which are attached to the line. This attribute is formatted as a string where each octet represents the 'Terminal Identifier' of the handset. Note that the over…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.4
pktcDectLineSettingsListDialingPrefix This attribute represents a prefix to add to called party numbers for calls placed on the line.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.5
pktcDectLineSettingsListFPMelody This attribute represents the melody of the FP linked to this line.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.6
pktcDectLineSettingsListFPVolume This attribute represents the melody volume of the FP linked to this line.	Unsigned32 Constraints: range: 0-128	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.7
pktcDectLineSettingsListBlockedNB This attribute represents forbidden called party numbers on the line.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.8
pktcDectLineSettingsListMultipleCalls This attribute represents the current mode of the line: The value 'true' indicates support for multiple call mode The value 'false' indicates support for single call mode. For PacketCable Client devices supporting onl…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.9
pktcDectLineSettingsListIntrusionCall This attribute represents the call intrusion mode for the line. The value 'true' indicates the line has 'call intrusion' enabled. Otherwise the value 'false' is reported. The PacketCable Client device …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4491.2.2.8.4.1.12.1.10

This object represents the performance statistics of each PP. 
When Zero Emission is enabled this object store statistics on 
a per call basis. 
When Zero Emission is disabled, this object may contains a 
single instance per PP (Terminal ID)
referent to all the messages activity in the upstream direction 
(PP to FP) or maintain per call statistics.

pktcDectPerformanceEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.13.1

The Conceptual row of pktcDectPerformanceTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
pktcDectPerformanceRecordNum This key represents the identifier of the logged statistics of a previous call. When Zero Emission is enabled the FP maintains an incrementing log information and deletes the oldest log instance when reaching the maxim…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.1
pktcDectPerformanceHandovers This attribute indicates how many channel handovers the PP has realized since the first activity related to this logged call.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.2
pktcDectPerformanceRTDelay This attribute indicates the round trip delay calculated by the FP. The FP measures the RoundTrip Delay at the beginning of the call.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.3
pktcDectPerformanceSyncFailures This attribute indicates the number of synchronization failures that have occurred during the current call.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.4
pktcDectPerformanceControlFieldErrs This attribute indicates the number of Control field errors encountered during this time period	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.5
pktcDectPerformancePayloadErrs This attribute indicates the number of CRC errors accumulated during this period of time.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.6
pktcDectPerformanceSlidingCollisions This attribute indicates the number of sliding collisions detected during this period of time.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.7
pktcDectPerformanceLinkErrsQbit this attribute indicates the number of link errors being signaled with the Q-bit during this period of time.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.13.1.8

This object represents the PP status and related 
connectivity information

pktcDectStatusEntry row .1.3.6.1.4.1.4491.2.2.8.4.1.14.1

The Conceptual row of pktcDectStatusTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
pktcDectStatusLastLocate This attribute represents the time when the last Locate message was sent by the PP to the FP.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.1
pktcDectStatusNumLocateMsgs This attribute represents the number of times the PP has subscribed since last FP reboot.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.2
pktcDectStatusNumConnectionFailures This attribute represents the number of times the PP has failed connections with the FP since last FP reinitialization.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.3
pktcDectStatusNumActivitySuccess This attribute indicates the number of times the PP has initiated any activity successfully since last time the FP reinitializes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.4
pktcDectStatusLastActivityFailure This attribute indicates the time where the last PP initiated activity and being rejected by the FP.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.5
pktcDectStatusRSSI This attribute represents the instantaneous Received Signal Strength from the PP.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4491.2.2.8.4.1.14.1.6