NQA-MIB Table View

Column Syntax OID

nqaAdminCtrlOwnerIndex

To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model for tables in which multiple users may
need to independently create or modify entries,
the initial…

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.2.1.1.1

nqaAdminCtrlTestName

The name of a test. This is locally unique,
within the scope of an nqaAdminCtrlOwnerIndex.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.2.1.1.2

nqaAdminCtrlTag

A string which is the description of the test instance.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.1.1.3

nqaAdminCtrlType

The type of the test instance.

NqaTyper/w

Type Values:

0	unknown
1	tcpConnect
2	udpEcho
3	httpAppl
4	ftpAppl
5	jitterAppl
6	icmpAppl
7	snmpAppl
8	traceRoute
9	lspPing
10	lspTraceRoute
11	dnsAppl
12	dhcpAppl
13	dlswAppl
14	pwe3Ping
15	pwe3Tracert
16	mPing
17	mTracert
18	macPing
19	macTunnelPing
20	lspJitter
21	pathMtu
22	icmpJitter
23	pathJitter
24	pppoe
25	vplsmPing
26	vplsmacPing
27	vplsmacTrace
28	vplsMTrace
29	gmacping
30	gmactrace
31	mactrace
32	vplspwping
33	vplspwtrace
36	rtptest
37	rtpsnoop
38	generalflow
39	ethernetService

.1.3.6.1.4.1.2011.5.25.111.2.1.1.4

nqaAdminCtrlFrequency

Specifies the interval when the test instance repeats.

secondsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.5

nqaAdminCtrlTimeOut

Specifies the duration to wait for the completion of test
instance. The default value of DHCP-type and FTP-type test
instance is 15s, The default value of PPPoE-type test
instance is 30s, and that of other types is 3…

secondsInteger32r/w

Constraints:
range: 1-60

.1.3.6.1.4.1.2011.5.25.111.2.1.1.6

nqaAdminCtrlThreshold1

Represents the threshold of RTD (Round Trip Delay). If the
RTT violates the threshold, the corresponding counter will
increase. It applies to any type of test instance.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.7

nqaAdminCtrlThreshold2

Represents the threshold of OWD (One Way Delay) from source
to destination. If the OWD violates the threshold, the
corresponding counter will increase. It applies only to
jitter-type test instances.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.8

nqaAdminCtrlThreshold3

Represents the threshold of OWD (One Way Delay) from
destination to source. If the OWD violates the threshold,
the corresponding counter will increase. It applies only
to jitter-type test instances.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.9

nqaAdminCtrlStatus

To set the value of this object can create or delete the
specified test instance and the records belonging to it.
Before deleting a test instance, the custom must make sure
that the status of the test instance is ina…

nqaAdminCtrlJitterThresholdSD

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2011.5.25.111.2.1.1.10

Represents the threshold of jitter from
source to destination. If the jitter violates the threshold,
the corresponding counter will increase. It applies only
to jitter-type and icmpjitter-type test instances.

nqaAdminCtrlJitterThresholdDS

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.11

Represents the threshold of jitter from
destination to source. If the jitter violates the threshold, the corresponding counter will increase. It applies only
to jitter-type and icmpjitter-type test instances.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.1.1.12

nqaAdminParaTable

table

.1.3.6.1.4.1.2011.5.25.111.2.2 · 1 row entry · 126 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaAdminParaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaAdminParaTable'

Description: nqaAdminParaTable describes how to configure parameters of a test instance.
Creation restrictions: None
Modification restrictions: None
Deletion restrictions: None
Access restrictions: None

nqaAdminParaEntry row .1.3.6.1.4.1.2011.5.25.111.2.2.1

set parameter in the nqaAdminParaTable.

Indexes

nqaAdminParaTargetAddressType

Column Syntax OID

Represents the address type of destination.

nqaAdminParaTargetAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.1

Represents the address of destination.

INET-ADDRESS-MIBInetPortNumberr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.2

nqaAdminParaTargetPort

Represents the port number of destination.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.2.2.1.3

nqaAdminParaSourceAddressType

Represents the address type of source.

nqaAdminParaSourceAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.4

Represents the address of source.

INET-ADDRESS-MIBInetPortNumberr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.5

nqaAdminParaSourcePort

Represents the port number of source.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.2.2.1.6

nqaAdminParaMaxTtl

Specifies the maximum value of TTL. The value cannot be set to 0 unless the test-type is pwe3ping, the lsp-version is rfc4379, and the ttl-copymode is pipe.

time-to-live valueUnsigned32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.7

nqaAdminParaInitialTtl

Specifies the initial value of TTL.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.8

nqaAdminParaStorageType

The storage type for this conceptual row. Conceptual rows
having the value 'permanent' need not allow write-access
to any columnar objects in the row.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.4.1.2011.5.25.111.2.2.1.9

nqaAdminParaMaxFailures

The value of this object indicates the maximum number of
consecutive timeouts allowed before terminating a remote
traceroute request. A value of 255 (maximum hop
count/possible TTL value) indicates that the function …

timeoutsUnsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.10

nqaAdminParaDontFragment

This object enables setting of Don't Fragment (DF) flag in
the IP header for a probe. Use of this object enables
performing a manual PATH MTU test.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.2.2.1.11

nqaAdminParaDataSize

The size of data field in packet.

octetsSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.12

nqaAdminParaDataFill

Represents the characters used for filling the data field.
This object is used together with the corresponding object,
nqaAdminParaDataSize.

OctetStringr/w

.1.3.6.1.4.1.2011.5.25.111.2.2.1.13

nqaAdminParaIfIndex

Specified the source interface or tunnel, from which probes
of the test instance are sent. The value zero implies that the
object is disabled.

nqaAdminParaByPassRouteTable

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.14

The purpose of this object is to optionally enable bypassing
the route table. If enabled, the remote host will bypass the
normal routing tables and send directly to a host on an attached
network. If the host is not o…

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.2.2.1.15

nqaAdminParaMiscOptions

Enables an application to specify implementation dependent options.

nqaAdminParaTrapGeneration

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.16

nqaAdminParaProbeCount

Specifies the number of packets sent by the test instance, or times
of probe repeated, in which may send several packets. In the first case,
the range is 1 to 65535 for IAS and 1 to 15 for other produc…

probesUnsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.2.2.1.17

Switch of notification. Determine whether and how to send notifications
for the test instance:
- probeFailure(0) - Generate a PathChange notification when the current
path varies from a previously determined pat…

Bitsr/w

Enumerated Values:

0	probeFailure
1	testFailure
2	testCompletion
3	overRtdThreshold
4	overOwdThresholdSd
5	overOwdThresholdDs
6	overJitterThresholdSd
7	overJitterThresholdDs
8	testResultChange
9	resultChangePacked

.1.3.6.1.4.1.2011.5.25.111.2.2.1.18

nqaAdminParaTrapProbeFailureFilter

Specifies the condition when to trigger an nqaProbeFailed notification.
When the number of consecutive failed probes violates the threshold indicated
by nqaAdminParaTrapProbeFailureFilter, a notification will be creat…

Unsigned32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.2011.5.25.111.2.2.1.19

nqaAdminParaTrapTestFailureFilter

Specifies the condition when to trigger an nqaTestFailed notification. When
the number of failed tests violates the threshold indicated by
nqaAdminParaTrapTestFailureFilter, a notification will be created. There are
…

Unsigned32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.2011.5.25.111.2.2.1.20

nqaAdminParaDSField

Specifies the Differentiated Services (DS) field in the IP packet. The DS
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
the Traffic Class octet in IPv6 header.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.21

nqaAdminParaDnsServerAddressType

Specifies the address type of DNS server.

nqaAdminParaDnsServerAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.22

Specifies the address of DNS server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.23

nqaAdminParaOperation

Specifies the operation of FTP or HTTP type test instance. The
operations of FTP-type test instance include get and put. The
operations of HTTP-type test instance include get and post.

NqaOperationr/w

Type Values:

1	noOperation
2	httpGet
3	httpPost
4	ftpGet
5	ftpPut

.1.3.6.1.4.1.2011.5.25.111.2.2.1.24

nqaAdminParaHttpVersion

Specifies the version of HTTP.

nqaAdminParaHttpOperationString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.25

A string that specifies the HTTP operation which will be sent
to the HTTP server.

nqaAdminParaTestFailurePercent

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.26

Specifies the scale over which the test will be regarded as failed.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.2011.5.25.111.2.2.1.27

nqaAdminParaFtpUserName

Specifies the user name of the FTP server.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.28

nqaAdminParaFtpPassword

Specifies the password of the user of the FTP server.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.29

nqaAdminParaFtpFilePath

Specifies the full name of the file which will be transmitted
by the FTP-type test instance.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.30

nqaAdminParaFtpFileSize

Specifies the size that the file will be transmitted by the
FTP-type test instance. It may be part of the file.

Integer32r/w

Constraints:
range: 0-10000

.1.3.6.1.4.1.2011.5.25.111.2.2.1.31

nqaAdminParaInterval

Specifies the interval between two consecutive probe packets.
If the test type is JITTER, ICMP JITTER or GENERALFLOW,
the interval is restored to the default value when the value is set to 0.

millsecondsInteger32r/w

Constraints:
range: 0-60000

.1.3.6.1.4.1.2011.5.25.111.2.2.1.32

nqaAdminParaNumPackets

Specifies the number of packet sent in each probe. This object
is used together with nqaAdminParaProbeCount, and only applies to
jitter-type test instance.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.2.1.33

nqaAdminParaVrfName

Specifies the VRF name.

nqaAdminParaLspAddressType

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.34

Specifies the address type of LSP. The object applies to lspping,
lsptrace and lspjitter type test instance.

Enumerationr/w

Enumerated Values:

1	ipv4
3	te
6	ipv4vpn
8	srte
9	srbe
12	bgp
13	srtepolicy
100	ring

.1.3.6.1.4.1.2011.5.25.111.2.2.1.35

nqaAdminParaLspAddressMask

Specifies the address mask of LSP. The object applies to lspping,
lsptrace and lspjitter type test instance.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.2.1.36

nqaAdminParaLspIpAddress

IP Address filled in the ip header, must be a 127/8 address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.37

nqaAdminParaLspPWE3VcId

The local Pseudo wire ID in PWE3 Ping test

nqaAdminParaLspPWE3Option

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.38

nqaAdminParaLspPWE3Type

The encapsulation type of Pseudo wire ID in the PWE3 Ping test

Enumerationr/w

Enumerated Values:

1	fr
2	atmAal5Sdu
3	atmCellTransport
4	vlan
5	ethernet
6	hdlc
7	ppp
9	atmNto1Vcc
10	atmNto1Vpc
11	ipLayer2
12	atm1to1Vcc
13	atm1to1Vpc
16	cep
17	satopE1
18	satopT1
19	satopE3
21	cesopsnBasic
64	ipInterworking

.1.3.6.1.4.1.2011.5.25.111.2.2.1.39

The label type of PWE3 Ping and PWE3 Tracert test.

Enumerationr/w

Enumerated Values:

1	labelAlert
2	controlWord
3	normal

.1.3.6.1.4.1.2011.5.25.111.2.2.1.40

nqaAdminParaLspPWE3RemoteVcId

The remote Pseudo wire ID in PWE Ping test.

nqaAdminParaLspPWE3RemoteAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.41

The remote IP address in PWE3 Ping test.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.42

nqaAdminParaLspExp

The 3bit EXP field of the MPLS echo packet label.

Unsigned32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.5.25.111.2.2.1.43

nqaAdminParaLspReplyMode

ReplyMode
Value Meaning
***** *******
1 Do not reply
2 Reply via an IPv4/IPv6 UDP packet
3 Reply via an IPv4/IPv6 UDP packet with Router Alert
4 Reply via application level control channel
5 Reply v…

Enumerationr/w

Enumerated Values:

1	noReply
2	udp
3	udpRouterAlert
4	levelControlChannel
5	udpviaVPLS
6	specifiedTunnelPath

.1.3.6.1.4.1.2011.5.25.111.2.2.1.44

nqaAdminParaResultRowMax

Specifies the maximum number of result records.

nqaAdminParaHistoryRowMax

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.2.1.45

Specifies the maximum number of history records.

nqaAdminParaCreateHopsEntries

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.2.1.46

When set to enable (1), the result of each hop
will be kept in nqaResultsTable. The object applies
to trace, pwe3trace, lsptrace, vplstrace, vplspwtrace type test instance.

EnableValuer/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.2.2.1.47

nqaAdminParaLspVCType

The type of protocol which establishes PW in the pwe3tracert test

Enumerationr/w

Enumerated Values:

1	ldp
2	bgp
3	bgpad

.1.3.6.1.4.1.2011.5.25.111.2.2.1.48

nqaAdminParaMTraceLastHopAddress

The last hop router's IP address in Mtrace test.

nqaAdminParaMTraceSourceAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.49

The IP address of the multicast source for the path being
traced in Mtrace test.

nqaAdminParaMTraceGroupAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.50

The group address to be traced in Mtrace test, or zero if no
group-specific information is desired.

nqaAdminParaMTraceSendMode

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.51

nqaAdminParaMTraceMaxTtl

The maximum number of hops that the requester wants to
trace in Mtrace test.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.52

The sending mode of the Query pamessage in Mtrace test.

Enumerationr/w

Enumerated Values:

1	multicastTree
2	allRouter
3	destination
4	lastHop

.1.3.6.1.4.1.2011.5.25.111.2.2.1.53

nqaAdminParaMTraceResponseTtl

The TTL at which to multicast the response in Mtrace test,
if the response address is a multicast address.

Unsigned32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.54

nqaAdminParaMTraceResponseAddressType

Mtrace response address type

nqaAdminParaMTraceResponseAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.55

This field specifies where the completed traceroute response
packet gets sent in Mtrace test. It can be a unicast address or
a multicast address

nqaAdminParaDistanceNodeType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.56

The destination of MAC ping(mac address or rmepid).

NqaDistanceNodeTyper/w

Type Values:

1	macAddress
2	mepID

.1.3.6.1.4.1.2011.5.25.111.2.2.1.57

nqaAdminParaMacAddress

Mac address of the destination of MAC PING.

IEEE802171-CFM-MIBDot1agCfmMepIdOrZeror/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.2011.5.25.111.2.2.1.58

nqaAdminParaRMepID

Rmepid of the destination of MAC PING.

Type Constraints:
range: 0..8191

.1.3.6.1.4.1.2011.5.25.111.2.2.1.59

nqaAdminParaMDName

Indicate the MD name in which the MAC Ping operated.

OctetStringr/w

Constraints:
range: 0-43

.1.3.6.1.4.1.2011.5.25.111.2.2.1.60

nqaAdminParaMAName

Indicate the MA name in which the MAC Ping operated.

OctetStringr/w

Constraints:
range: 0-45

.1.3.6.1.4.1.2011.5.25.111.2.2.1.61

nqaAdminParaMacTunnelName

Indicate the MAC Tunnel name in which the MAC Ping operated.

OctetStringr/w

.1.3.6.1.4.1.2011.5.25.111.2.2.1.62

nqaAdminParaPathMtuStep

Specify the step of the path MTU test. If the last response
was received successful,the next packet's length will add
the step.

Integer32r/w

Constraints:
range: 1-512

.1.3.6.1.4.1.2011.5.25.111.2.2.1.63

nqaAdminParaPathMtuDiscoveryPathMtuMax

Specify the max value of the discovery field in the path MTU test.

Integer32r/w

Constraints:
range: 48-9198

.1.3.6.1.4.1.2011.5.25.111.2.2.1.64

nqaAdminParaIcmpJitterMode

Select the type of ICMP packets to be sent in ICMP jitter and path
jitter test. The value can be icmpTimestamp(1) or icmpEcho(2).

Enumerationr/w

Enumerated Values:

1	icmpTimestamp
2	icmpEcho

.1.3.6.1.4.1.2011.5.25.111.2.2.1.65

nqaAdminParaCodecType

To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe.

Enumerationr/w

Enumerated Values:

1	notDefined
2	g711Alaw
3	g711Ulaw
4	g729A

.1.3.6.1.4.1.2011.5.25.111.2.2.1.66

nqaAdminParaIcpifAdvFactor

The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values.

Suggestion values…

Integer32r/w

Constraints:
range: 0-20

.1.3.6.1.4.1.2011.5.25.111.2.2.1.67

nqaAdminParaFtpMode

To indicate the mode to be used with ftp probe. This is
applicable only for the ftp probe.

Enumerationr/w

Enumerated Values:

1	active
2	passive

.1.3.6.1.4.1.2011.5.25.111.2.2.1.68

nqaAdminParaHardwareBased

Indicates that the hardware is enabled to send packets.
(The value range: enable:1;disable:2.The default value is disable(2))

nqaAdminParaPppoeUserName

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.111.2.2.1.69

Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute,
tcp,udp,ftp,dns,http probes, this parameter indicates that the probe
uses PPPoE encapsulation.
This parameter accepts the characters in sight only.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.2.2.1.70

nqaAdminParaPppoePassword

Specifies the password of PPPoE dial-up. This is
applicable only for the PPPoE probe.
This parameter accepts the characters in sight only.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.5.25.111.2.2.1.71

nqaAdminParaPppoeVlanIf

Specifies the vlanif of PPPoE dial-up. For jitter, icmp, traceroute, tcp,
udp, ftp, dns, http probes, this parameter indicates that the probe uses
PPPoE encapsulation.

Integer32r/w

Constraints:
range: 0-4093

.1.3.6.1.4.1.2011.5.25.111.2.2.1.72

nqaAdminParaPppoeAuthenticationMode

Specifies the authentication mode of PPPoE dial-up. This is
applicable only for the PPPoE probe.

Enumerationr/w

Enumerated Values:

1	chap
2	pap

.1.3.6.1.4.1.2011.5.25.111.2.2.1.73

nqaAdminParaPppoeRedialUpTimes

Specifies the redialup times of PPPoE dial-up. This is
applicable only for the PPPoE probe.

Integer32r/w

Constraints:
range: 0-10

.1.3.6.1.4.1.2011.5.25.111.2.2.1.74

nqaAdminParaPppoeInterval

Specifies the redialup interval of PPPoE dial-up. This is
applicable only for the PPPoE probe.

Integer32r/w

Constraints:
range: 1-600

.1.3.6.1.4.1.2011.5.25.111.2.2.1.75

nqaAdminParaVsiName

Specify the name of the VSI(Virtual Switch Instance)

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.2011.5.25.111.2.2.1.76

nqaAdminParaVlanId

Specify the Vlan ID

Q-BRIDGE-MIBVlanIdOrNoner/w

Type Constraints:
range: 0..4094

.1.3.6.1.4.1.2011.5.25.111.2.2.1.77

nqaAdminParaLspTunnelType

To indicate ping/trace which lsp tunnel.

Enumerationr/w

Enumerated Values:

0	main
1	hotstandby
2	primary

.1.3.6.1.4.1.2011.5.25.111.2.2.1.78

nqaAdminParaLspNextHopAddress

Represents the address of nexthop.

nqaAdminParaRemoteAddressType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.79

nqaAdminParaLspVersion

Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol, RFC4379 protocol , ptn mode or compatible mode.

Enumerationr/w

Enumerated Values:

1	draft6
2	rfc4379
3	ptnmode
4	compatiblemode

.1.3.6.1.4.1.2011.5.25.111.2.2.1.80

Represents the address type of remote.

nqaAdminParaRemoteAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.81

Represents the address of remote.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.82

nqaAdminParaTimeUnit

The unit of the timestamp, ms or us.

Enumerationr/w

Enumerated Values:

1	us
2	ms

.1.3.6.1.4.1.2011.5.25.111.2.2.1.83

nqaAdminParaProbeRate

The rate of sending message, bps.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.84

nqaAdminParaLifeTime

The life time of test-case, s.

nqaAdminParaSampleFrequency

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.85

nqaAdminParaProtocolType

The protocol type of test-case. When the test type is rtptest or rtpsnoop, the default value is udp(1), when the test type is not rtptest or rtpsnoop, the default value is unknown(0), which means unspecified or unused.

ProtocolTyper/w

Type Values:

0	unknown
1	udp
2	tcp

.1.3.6.1.4.1.2011.5.25.111.2.2.1.86

The frequency of rtpsnoop test, khz.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.87

nqaAdminParaPacketSize

The packet size of message, byte.

nqaAdminParaPacketInterval

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.88

The interval of sending message, ms.

nqaAdminParaNextHopAddressType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.89

Specifies the address type of nexthop.

nqaAdminParaNextHopAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.90

Specifies the address of nexthop.

nqaAdminParaForwardingSimulationInboundIfIndex

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.91

Specifies the inbound interface to simulate product forwarding.

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.2011.5.25.111.2.2.1.92

nqaAdminParaMeasure

This object is used to configure the test mode for generalflow test.

Enumerationr/w

Enumerated Values:

0	unknown
1	delay
2	loss
3	throughput

.1.3.6.1.4.1.2011.5.25.111.2.2.1.93

nqaAdminParaEthPriority

This object is used to configure the priority of Ethernet packets for generalflow test in the Ethernet service scenario.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.94

nqaAdminParaMinRate

This object is used to configure the minimum transmitting rate, in Kbps.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.95

nqaAdminParaMaxRate

This object is used to configure the maximum transmitting rate, in Kbps.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.96

nqaAdminParaCevid

This object is used to configure the CE VLAN ID for generalflow test in the Ethernet service scenario.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.97

nqaAdminParaPevid

This object is used to configure the PE VLAN ID for generalflow test in the Ethernet service scenario.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.98

nqaAdminParaPrecision

This object is used to configure the throughput precision.

nqaAdminParaSnmpCommunityRead

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.99

Set the community name to that with a read-only permission configured on the SNMP agent. When read, it always returns length 0.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.2.2.1.100

nqaAdminParaDatasizeList

The size of data field in packet for generalflow test, default '64 128 256 512 1024 1280 1518'.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.5.25.111.2.2.1.101

nqaAdminParaFailRatioPrecision

Indicates the precision of the threshold for the packet loss ratio.
0 indicates in 10e-4.
1 indicates in 10e-9.

Unsigned32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.2011.5.25.111.2.2.1.102

nqaAdminParaFailRatioValue

Indicates the threshold for the packet loss ratio.The default value is 0.

Unsigned32r/w

Constraints:
range: 0-10000000

.1.3.6.1.4.1.2011.5.25.111.2.2.1.103

nqaAdminGeneralflowTestBehavior

This object indicates the action performed on the non-test frames by the initiator.
0: Non-test frames will be discarded, and test frames will be forwarded.
1: Both non-test frames and test frames will be forwarded.

Unsigned32r/w

Constraints:
range: 0-1

.1.3.6.1.4.1.2011.5.25.111.2.2.1.104

nqaAdminParaFrameRate

This object indicates an Ethernet frame rate.
1: utilized line rate (L1 rate).
2: information rate (L2 rate).

Enumerationr/w

Enumerated Values:

1	l1
2	l2

.1.3.6.1.4.1.2011.5.25.111.2.2.1.105

nqaAdminGeneralflowDiscardNonTestPriority

This object is used to configure the discarding priority of Ethernet packets for generalflow test in the Ethernet service scenario.
The value can range from 0 to 7 if this node was configured, the value will be 0xffffff…

nqaAdminParaSourceMacAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.106

Mac address of the source point.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.2.2.1.107

nqaAdminParaCeEthType

Specifies the type of Ethernet encapsulation.Default is 0x8100.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.108

nqaAdminParaPeEthType

Specifies the type of Ethernet encapsulation for QinQ outer vlan. Default is 0x8100.

nqaAdminParaLspVpnFrrPathType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.109

nqaAdminParaDirection

Specifies the test direction.
1 indicates inbound. Send packets in manner of simulate product forwarding.
2 indicates outbound. Send packets in manner of output.

Unsigned32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.2011.5.25.111.2.2.1.110

To indicate ping which ipv4-vpn lsp.

Enumerationr/w

Enumerated Values:

0	main
1	backup

.1.3.6.1.4.1.2011.5.25.111.2.2.1.111

nqaAdminParaSoftwareBased

Indicates that the software-based test is enabled only when the test case type is rtptest.
(The value range: enable:1;disable:2.The default value is disable(2))

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.111.2.2.1.112

nqaAdminParaLspPathType

To indicate ping vpls pw via which lsp.

Enumerationr/w

Enumerated Values:

1	main
2	bypass

.1.3.6.1.4.1.2011.5.25.111.2.2.1.113

nqaAdminParaPathType

To indicate ping request packet via which path.

Enumerationr/w

Enumerated Values:

1	main
2	bypass

.1.3.6.1.4.1.2011.5.25.111.2.2.1.114

nqaAdminParaFragment

This object enables setting of Fragment (F) flag in
the IP header for a probe.

nqaAdminParaEthPriorityStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.2.2.1.115

Used for enabling or disabling the priority of Ethernet functionality when the test case type is Generalflow.
Options:
1. enabled(1) -indicates the priority of Ethernet functionality is enabled.
2. disabled(2) -indic…

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.111.2.2.1.116

nqaAdminParaRmoteFecType

Specifies the remote FEC type. The object applies to lspping and
lsptrace type test instance.

Enumerationr/w

Enumerated Values:

0	null
1	ldp

.1.3.6.1.4.1.2011.5.25.111.2.2.1.117

nqaAdminParaRmoteFecMask

Specifies the address mask of remote FEC. The object applies to lspping and
lsptrace type test instance.

nqaAdminParaRmoteFecIpAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.2.1.118

The IPV4 address of remote FEC. The object applies to lspping and
lsptrace type test instance.

nqaAdminParaSrPolicyEndPointAddrType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.119

nqaAdminParaSrPolicyName

The Policy name of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.120

Represents the address type of destination.

nqaAdminParaSrPolicyEndPointIpAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.2.2.1.121

The destination of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance.

nqaAdminParaSrPolicyEndPointColor

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.122

The color of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance.

Unsigned32r/w

Constraints:
range: 0-4294967295

.1.3.6.1.4.1.2011.5.25.111.2.2.1.123

nqaAdminParaSrPolicyBindingSid

The binding sid of of the SR-MPLS TE policy. The object applies to lspping and
lsptrace type test instance.

Unsigned32r/w

Constraints:
range: 0-0
range: 16-1048575

.1.3.6.1.4.1.2011.5.25.111.2.2.1.124

nqaAdminParaDscp

Indicates that the DS field is defined as the DSCP in the IP packet.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.2.2.1.125

nqaAdminParaFlexAlgoId

The flexible algorithm ID. The object applies to lspping and lsptrace type test instance.

Unsigned32r/w

Constraints:
range: 0-0
range: 128-255

.1.3.6.1.4.1.2011.5.25.111.2.2.1.126

nqaScheduleTable

table

.1.3.6.1.4.1.2011.5.25.111.2.3 · 1 row entry · 10 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaScheduleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaScheduleTable'

Description: nqaScheduleTable describes test instance task scheduling. It implements scheduling of test instances to reduce device burden caused by concurrent tasks. The scheduling content includes the setting of the start time and end time of a single test instance. When several tasks are performed at the same time, the device properly arranges start time and test intervals.
Creation restrictions: None
Modification restrictions: The Read-create node can be modified when a test instance is in inactive state.
Deletion restrictions: None
Access restrictions: None

nqaScheduleEntry row .1.3.6.1.4.1.2011.5.25.111.2.3.1

Set start-up in the nqaAdminParaTable.

Indexes

Column Syntax OID

nqaScheduleStartType

Specifies the start type of the test instance. The object
is used together with nqaScheduleStartTime.

Enumerationr/w

Enumerated Values:

0	default
1	startNow
2	startAt
3	startAfter
4	startDaily

.1.3.6.1.4.1.2011.5.25.111.2.3.1.1

nqaScheduleStartTime

Specifies the start time of the test instance. Setting
the value to 0 indicates to start the test instance
immediately. After configuring this object, the status
of the test instance is active, and the parameters of …

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.3.1.2

nqaScheduleEndType

Specifies the end type of the test instance. The object
is used together with nqaScheduleEndTime.

Enumerationr/w

Enumerated Values:

0	default
1	endAt
2	endAfter
3	endLifetime

.1.3.6.1.4.1.2011.5.25.111.2.3.1.3

nqaScheduleEndTime

Specifies the end time of the test instance.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.3.1.4

nqaScheduleAgeTime

Specifies the aging time of the test instance, the time
how long the test instance will be reserved in NQA, after
the test instance is inactive. Setting the value to 0
indicates reserving the test instance eternally.

nqaScheduleNumOfInitiations

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.3.1.5

nqaScheduleElapsedTime

The elapsed time (the period of time after task dispatch).

SNMPv2-TCTimeInterval

Type Constraints:
range: 0..2147483647

Description:

A period of time, measured in units of 0.01 seconds.

.1.3.6.1.4.1.2011.5.25.111.2.3.1.6

Specifies the times that the test instance has been initialed.
This object is used as the index of the result table, HTTP
statistics table, jitter statistics table, FTP statistics
table and history table.

nqaScheduleLastFinishIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.3.1.7

Specifies the latest finished test of the test instance, which is used as the index of the result table.

nqaScheduleLastCollectIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.3.1.8

nqaScheduleOperStatus

Specifies the status of dispatching operation:
- reset: Clear all the records of the test instance.
- stop: Stop the test instance, if it's running.
- restart: Stop the test instance, if it's running,
and restart the …

Enumerationr/w

Enumerated Values:

1	reset
2	stop
3	restart
4	active
5	inactive

.1.3.6.1.4.1.2011.5.25.111.2.3.1.9

Specifies the index of the latest collection statistics
result record in the collection result table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.3.1.10

nqaGroupTable

table

.1.3.6.1.4.1.2011.5.25.111.2.4 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaGroupTable'

Set group for a test.

nqaGroupEntry row .1.3.6.1.4.1.2011.5.25.111.2.4.1

Set parameters in the nqaGroupTable.

Indexes

Column Syntax OID

nqaGroupStatusType

Specifies the group status of the test instance. The
value can be normal (1), leader (2) or member (3).

Enumerationr/w

Enumerated Values:

1	normal
2	leader
3	member

.1.3.6.1.4.1.2011.5.25.111.2.4.1.1

nqaGroupPeriod

Specifies the interval during which all members in
the specified group will be executed.

secondsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.4.1.2

nqaGroupLeaderOwnerIndex

Specifies the owner index of the group leader, if the
test instance is a member of the group.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.4.1.3

nqaGroupLeaderTestName

Specifies the test name of the group leader, if the
test instance is a member of the group.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.2.4.1.4

nqaGroupMemberNum

Specifies the number of member in the group.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.2.4.1.5

nqaGroupMemberFree

Free all members in the group.

EnableValuer/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.2.4.1.6

nqaAdminParaExtTable

table

.1.3.6.1.4.1.2011.5.25.111.2.5 · 1 row entry · 50 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaAdminParaExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaAdminParaExtTable'

Description: Objects in this table are used in pairs. In each pair, the first object is read-only. After the test instance type is specified, the system automatically fills the character string. Its content is the description of the second object, so that the user can learn the description and value range of the second object. The second object is a configurable NQA parameter. Test instances have different descriptions and values. After the test instance type is specified, the user can obtain the information from the first object. The values of the first 15 pairs of objects in this table are numbers, and those of the last 10 pairs of objects are character strings.
Creation restrictions: None
Modification restrictions: None
Deletion restrictions: None
Access restrictions: None

nqaAdminParaExtEntry row .1.3.6.1.4.1.2011.5.25.111.2.5.1

Set parameter in the nqaAdminParaExtTable.

Indexes

Column	Syntax	OID
nqaAdminExtPara1 This object indicates the description of the nqaAdminExtPara2 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.1`
nqaAdminExtPara2 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara1 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.2`
nqaAdminExtPara3 This object indicates the description of the nqaAdminExtPara4 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.3`
nqaAdminExtPara4 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara3 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.4`
nqaAdminExtPara5 This object indicates the description of the nqaAdminExtPara6 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.5`
nqaAdminExtPara6 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara5 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.6`
nqaAdminExtPara7 This object indicates the description of the nqaAdminExtPara8 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.7`
nqaAdminExtPara8 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara7 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.8`
nqaAdminExtPara9 This object indicates the description of the nqaAdminExtPara10 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.9`
nqaAdminExtPara10 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara9 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.10`
nqaAdminExtPara11 This object indicates the description of the nqaAdminExtPara12 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.11`
nqaAdminExtPara12 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara11 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.12`
nqaAdminExtPara13 This object indicates the description of the nqaAdminExtPara14 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.13`
nqaAdminExtPara14 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara13 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.14`
nqaAdminExtPara15 This object indicates the description of the nqaAdminExtPara16 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.15`
nqaAdminExtPara16 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara15 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.16`
nqaAdminExtPara17 This object indicates the description of the nqaAdminExtPara18 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.17`
nqaAdminExtPara18 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara17 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.18`
nqaAdminExtPara19 This object indicates the description of the nqaAdminExtPara20 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.19`
nqaAdminExtPara20 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara19 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.20`
nqaAdminExtPara21 This object indicates the description of the nqaAdminExtPara22 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.21`
nqaAdminExtPara22 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara21 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.22`
nqaAdminExtPara23 This object indicates the description of the nqaAdminExtPara24 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.23`
nqaAdminExtPara24 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara23 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.24`
nqaAdminExtPara25 This object indicates the description of the nqaAdminExtPara26 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.25`
nqaAdminExtPara26 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara25 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.26`
nqaAdminExtPara27 This object indicates the description of the nqaAdminExtPara28 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.27`
nqaAdminExtPara28 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara27 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.28`
nqaAdminExtPara29 This object indicates the description of the nqaAdminExtPara30 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.29`
nqaAdminExtPara30 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara29 object after the test case is ascertained.	SNMPv2-SMIInteger32r/w Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.30`
nqaAdminExtPara31 This object indicates the description of the nqaAdminExtPara32 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.31`
nqaAdminExtPara32 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara31 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.32`
nqaAdminExtPara33 This object indicates the description of the nqaAdminExtPara34 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.33`
nqaAdminExtPara34 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara33 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.34`
nqaAdminExtPara35 This object indicates the description of the nqaAdminExtPara36 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.35`
nqaAdminExtPara36 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara35 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.36`
nqaAdminExtPara37 This object indicates the description of the nqaAdminExtPara38 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.37`
nqaAdminExtPara38 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara37 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.38`
nqaAdminExtPara39 This object indicates the description of the nqaAdminExtPara40 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.39`
nqaAdminExtPara40 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara39 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.40`
nqaAdminExtPara41 This object indicates the description of the nqaAdminExtPara42 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.41`
nqaAdminExtPara42 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara41 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.42`
nqaAdminExtPara43 This object indicates the description of the nqaAdminExtPara44 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.43`
nqaAdminExtPara44 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara43 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.44`
nqaAdminExtPara45 This object indicates the description of the nqaAdminExtPara46 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.45`
nqaAdminExtPara46 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara45 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.46`
nqaAdminExtPara47 This object indicates the description of the nqaAdminExtPara48 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.47`
nqaAdminExtPara48 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara47 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.48`
nqaAdminExtPara49 This object indicates the description of the nqaAdminExtPara50 object. The value is automatically assigned by the system after the type of the test case is ascertained.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.49`
nqaAdminExtPara50 This object is a configurable NQA parameter object. Its value and meaning are assigned by the nqaAdminExtPara49 object after the test case is ascertained.	OctetStringr/w	`.1.3.6.1.4.1.2011.5.25.111.2.5.1.50`

nqaEthernetServiceParaTable

table

.1.3.6.1.4.1.2011.5.25.111.2.6 · 1 row entry · 8 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaEthernetServiceParaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaEthernetServiceParaTable'

Parameters about Y.1564 test parameters table.

nqaEthernetServiceParaEntry row .1.3.6.1.4.1.2011.5.25.111.2.6.1

Parameters about Y.1564 test parameters entry.

Indexes

nqaEthernetServiceParaFwdSimulationInboundIfIndex

Column Syntax OID

This object indicates the forwarding-simulation inbound interface.

nqaEthernetServiceParaOutboundIfIndex

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.2011.5.25.111.2.6.1.1

This object indicates the outbound interface.

nqaEthernetServiceParaConfigrationDuration

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.4.1.2011.5.25.111.2.6.1.2

This object indicates the duration of configration test.

nqaEthernetServiceParaPerformanceDuration

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.6.1.3

This object indicates the duration of performance test.

nqaEthernetServiceParaPacketSizeValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.2.6.1.4

This object indicates the packet size.
The default value is 512.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.2011.5.25.111.2.6.1.5

nqaEthernetServiceParaTestFlowId

This object indicates the testflow id.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.5.25.111.2.6.1.6

nqaEthernetServiceParaPacketSizeProfile

This object indicates the packet size mode, the default is 0.

Enumerationr/w

Enumerated Values:

0	default
1	simpleImix

.1.3.6.1.4.1.2011.5.25.111.2.6.1.7

nqaEthernetServiceParaDisorderStatistics

Whether enable packet disorder statistic,the default is disable(1).

Enumerationr/w

Enumerated Values:

0	enable
1	disable

.1.3.6.1.4.1.2011.5.25.111.2.6.1.8

nqaTcpServerTable

table

.1.3.6.1.4.1.2011.5.25.111.3.2 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaTcpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaTcpServerTable'

A table which contains the status of nqa tcp server 
configuration information.

nqaTcpServerEntry row .1.3.6.1.4.1.2011.5.25.111.3.2.1

A table which contains the status of nqa tcp server
configuration information.

This entry is included not only the tcp server ip address
but also the tcp server tcp port. If used for VPN it is also
incl…

Indexes

nqaTcpServerAddress nqaTcpServerPort nqaTcpServerVrfName

Column Syntax OID

nqaTcpServerAddressType

Specifies the address type of TCP server.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.3.2.1.1

nqaTcpServerAddress

Specifies the address of TCP server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.3.2.1.2

nqaTcpServerPort

Specifies the port number on which TCP server is listening.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.3.2.1.3

nqaTcpServerVrfName

Specifies the VRF (VPN Routing & Forwarding) instances name
of the TCP server.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.5.25.111.3.2.1.4

nqaTcpServerStatus

Specifies the operation of the TCP server, creating or deleting.

nqaUdpServerAddress nqaUdpServerPort nqaUdpServerVrfName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.3.2.1.5

nqaUdpServerTable

table

.1.3.6.1.4.1.2011.5.25.111.3.3 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaUdpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaUdpServerTable'

Description: This table describes how to configure the NQA UDP service of the server, such as configuring a protocol, IP address, port number, and VRF.
Creation restrictions
The entries in this table can be created only when the indexes nqaUdpServerAddress, nqaUdpServerPort, and nqaUdpServerVrfName are specified.
The nqaUdpServerAddressType index value must be ipv4(1).
The nqaUdpServerStatus index value must be CreateAndGo (4).

Modification restrictions: The entries in this table cannot be modified.

Deletion restrictions
The entries in this table can be deleted. Indexes must be specified.
The nqaUdpServerStatus index value must be Destroy (6).

Access restrictions
The entries in this table can be accessed only when the nqaUdpServerStatus index value is active(1) or notInService(2).

nqaUdpServerEntry row .1.3.6.1.4.1.2011.5.25.111.3.3.1

A table which contains the status of nqa udp server
configuration information.

This entry is includeed not only the udp server ip address
but also the udp server udp port.If used for VPN it is also
inclu…

Indexes

Column Syntax OID

nqaUdpServerAddressType

Specifies the address type of UDP server.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.3.3.1.1

nqaUdpServerAddress

Specifies the address of UDP server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.3.3.1.2

nqaUdpServerPort

Specifies the port number on which UDP server is listening.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.3.3.1.3

nqaUdpServerVrfName

Specifies the VRF (VPN Routing & Forwarding) instances name
of the UDP server.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.5.25.111.3.3.1.4

nqaUdpServerStatus

Specifies the operation of the UDP server, creating or deleting.

nqaIcmpServerAddress nqaIcmpServerVrfName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.3.3.1.5

nqaIcmpServerTable

table

.1.3.6.1.4.1.2011.5.25.111.3.4 · 1 row entry · 4 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaIcmpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaIcmpServerTable'

Description: This table describes how to configure the NQA ICMP service of the server, such as configuring a server, IP address, and VRF.
Creation restrictions
The entries in this table can be created only when the indexes nqaIcmpServerAddress and nqaUdpServerVrfName are specified.
The nqaIcmpServerAddressType index value must be ipv4(1).
The nqaIcmpServerStatus index value must be CreateAndGo (4).

Modification restrictions: The entries in this table cannot be modified.

Deletion restrictions
The entries in this table can be deleted. Indexes must be specified.
The nqaIcmpServerStatus index value must be 6(Destroy).

Access restrictions
If the nqaIcmpServerStatus value returned is active(1), the ICMP server is running. If the nqaIcmpServerStatus value returned is notInService(2), the ICMP server has stopped running.

nqaIcmpServerEntry row .1.3.6.1.4.1.2011.5.25.111.3.4.1

A table which contains the status of nqa ICMP server
configuration information.

This entry is included the ICMP server IP address.
If used for VPN it is also included the VPN name.

Indexes

Column Syntax OID

nqaIcmpServerAddress

Specifies the address of ICMP server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.3.4.1.1

nqaIcmpServerVrfName

Specifies the VRF (VPN Routing & Forwarding) instances name
of the ICMP server.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.5.25.111.3.4.1.2

nqaIcmpServerAddressType

Specifies the address type of ICMP server.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.3.4.1.3

nqaIcmpServerStatus

Specifies the operation of the ICMP server, creating or deleting.

nqaRtpUdpServerAddress nqaRtpUdpServerPort nqaRtpUdpServerVrfName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.3.4.1.51

nqaRtpUdpServerTable

table

.1.3.6.1.4.1.2011.5.25.111.3.5 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaRtpUdpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaRtpUdpServerTable'

A table which contains the status of nqa rtp-udp server 
configuration information.

nqaRtpUdpServerEntry row .1.3.6.1.4.1.2011.5.25.111.3.5.1

A table which contains the status of nqa rtp-udp server
configuration information.

This entry is includeed not only the rtp-udp server ip address
but also the rtp-udp server udp port.If used for VPN it is…

Indexes

Column Syntax OID

nqaRtpUdpServerAddressType

Specifies the address type of rtp-udp server.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.3.5.1.1

nqaRtpUdpServerAddress

Specifies the address of rtp-udp server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.3.5.1.2

nqaRtpUdpServerPort

Specifies the port number on which rtp-udp server is listening.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.3.5.1.3

nqaRtpUdpServerVrfName

Specifies the VRF (VPN Routing & Forwarding) instances name
of the rtp-udp server.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.5.25.111.3.5.1.4

nqaRtpUdpServerStatus

Specifies the operation of the rtp-udp server, creating or deleting.

nqaRtpUdpServerSoftwareBased

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.3.5.1.5

Indicates that the software-based test is enabled only when the test case type is rtptest.
(The value range: enable:1;disable:2.The default value is disable(2))

nqaRtpTcpServerAddress nqaRtpTcpServerPort nqaRtpTcpServerVrfName

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.2011.5.25.111.3.5.1.6

nqaRtpTcpServerTable

table

.1.3.6.1.4.1.2011.5.25.111.3.6 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaRtpTcpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaRtpTcpServerTable'

This table contains the status of nqa rtp-tcp server configurations.

nqaRtpTcpServerEntry row .1.3.6.1.4.1.2011.5.25.111.3.6.1

This table contains the status of nqa rtp-tcp server configurations.

This entry includes not only the rtp-tcp server ip address but also the rtp-tcp server udp port. If it is used for VPN, the VPN name is a…

Indexes

Column Syntax OID

nqaRtpTcpServerAddressType

Specifies the address type of the rtp-tcp server.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.3.6.1.1

nqaRtpTcpServerAddress

Specifies the address of the rtp-tcp server.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.3.6.1.2

nqaRtpTcpServerPort

Specifies the number of the port on which the rtp-tcp server is listening.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.3.6.1.3

nqaRtpTcpServerVrfName

Specifies the VRF (VPN Routing & Forwarding) names of the rtp-tcp server.

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.2011.5.25.111.3.6.1.4

nqaRtpTcpServerStatus

Specifies whether an rtp-tcp server is created or deleted.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaResultsIndex nqaResultsHopIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.3.6.1.5

nqaResultsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.1 · 1 row entry · 45 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaResultsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaResultsTable'

Description: This table describes result information of a test instance.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be ICMP, UDP, or TCP.
The nqaResultsIndex and nqaResultsHopIndex values must be 0.

nqaResultsEntry row .1.3.6.1.4.1.2011.5.25.111.4.1.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column Syntax OID

nqaResultsIndex

The result table index and times of dispatching dependency tests.
Each test can only reserve 5 records. The result table only contains
icmp/dns/dlsw/lspPing/Traceroute/LSP Traceroute/tcp/udp/snmp/dhcp Traceroute infor…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.1.1.1

nqaResultsHopIndex

The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.111.4.1.1.2

nqaResultsCompletions

The status of test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure
3	negotiateFailed
5	abnormal
255	init

.1.3.6.1.4.1.2011.5.25.111.4.1.1.3

nqaResultsTestAttempts

The times of executing tests, which includes the times of successful execution,
failed execution and interruption (interrupted by human or system).
The current number of test attempts. The value of this object MUST be …

testsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.4

nqaResultsCurHopCount

It is equal to the hop count index executed
by current Traceroute or LSP Traceroute tests.
Ping/LSP Ping does not use this entry. The default value is 0.

hopsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.5

nqaResultsCurProbeCount

The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index.

probesSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.6

nqaResultsRTDOverThresholds

The times of successful statistics test RTD (Round Trip Delay)
over the threshold.

nqaResultsSumCompletionTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.7

The sum of RTT (response time) of all packets of each hop for executing Traceroute,
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
lsp ping and disman-ping tests and so on.

nqaResultsSumCompletionTime2Low

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.8

The low order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.

Low/High order is defined where the binary number
will look as follo…

nqaResultsSumCompletionTime2High

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.9

The high order 32 bits of the accumulated squares
of completion times (in milliseconds) of NQA
operations which complete successfully.

See the nqaResultsSumCompletionTime2Low object
for a definition of …

nqaResultsCompletionTimeMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.10

The minimum RTT (for Traceroute and LSP Traceroute,
it is the minimum RTT among all the packet of next hop) of all packets for executing a test.

nqaResultsCompletionTimeMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.11

The maximum RTT (for Traceroute and LSP Traceroute,
it is the maximum RTT among all the packets of next hop) of all packets in executing a test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.12

nqaResultsDisconnects

The times of consecutive failures. For connectionless protocol type of test, this number should be zero.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.13

nqaResultsTimeouts

The number of occasions when a NQA operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.14

nqaResultsBusies

The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.15

nqaResultsNoConnections

The number of occasions when a NQA operation could not be
initiated because the connection to the target has not
been established. For all other nqaAdminCtrlType this
object will remain zero.

This cannot…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.16

nqaResultsSequenceErrors

The number of NQA operation completions received with
an unexpected sequence identifier. For all other values
of nqaAdminCtrlType this object will remain zero.

When this has occurred some of the possibl…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.17

nqaResultsDrops

The times probes of the test dropped due to sending or connecting failure.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.18

nqaResultsAddressType

The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16).

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.1.1.19

nqaResultsAddress

The destination address (TraceRoute is the destination address of each hop,
and ping is the destination address of tests).

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.1.1.20

nqaResultsProbeResponses

Number of responses received for the corresponding
test. The value of this object
MUST be reported as 0 when no probe responses have been
received.

responsesSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.21

nqaResultsSentProbes

The value of this object reflects the number of probes sent
for the corresponding test.
The value of this object MUST be reported as 0 when no probes
have been sent.

probesSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.22

nqaResultsLastGoodProbe

Date and time when the last response was received for a probe.

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.1.1.23

nqaResultsLastGoodPath

The date and time when the last complete path was determined.

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.1.1.24

nqaResultsTestFinished

The status of test execution.

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.1.1.25

nqaResultsRttAvg

The average of RTTs that were successfully measured by tests.

nqaResultsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.26

The ratio of the packets lost to all packets sent in the test.

nqaResultsRingResponseNode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.27

Ring response node ID, invalid value of 0.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.28

nqaResultChangeRecord

Records result change information for nqaResultsTestResultChangePackedNotification.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.4.1.1.29

nqaResultsDetail

Indicates detailed result information about the test instance.

nqaResultsChangeToFailureTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.30

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsChangeToSuccessTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.31

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsChangeToNoResultTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.32

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsChangeToNegotiationFailureTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.33

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsChangeToAbnormalTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.34

Records result change information for nqaResultsTestResultChangeNotification.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.35

nqaResultsFailureTimes

Records result change information for nqaResultsTestResultChangeNotification.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.36

nqaResultsSuccessTimes

Records result change information for nqaResultsTestResultChangeNotification.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.37

nqaResultsNoResultTimes

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsNegotiationFailureTimes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.38

Records result change information for nqaResultsTestResultChangeNotification.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.39

nqaResultsAbnormalTimes

Records result change information for nqaResultsTestResultChangeNotification.

nqaResultsLastCompletions

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.1.1.40

The status of test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure
3	negotiateFailed
5	abnormal
255	init

.1.3.6.1.4.1.2011.5.25.111.4.1.1.41

nqaResultsTestType

Test type.

Enumeration

Enumerated Values:

1	tcp
2	udp
5	jitter
6	icmp
7	snmp
8	trace
11	dns
14	pwe3ping
15	pwe3trace
18	macping
22	icmpjitter
26	vplsping
32	vplspwping
33	vplspwtrace

.1.3.6.1.4.1.2011.5.25.111.4.1.1.42

nqaResultsSourceIP

Source IP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.4.1.1.43

nqaResultsSourceIfName

Source interface name.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.4.1.1.44

nqaResultsDestinationIP

Destiation IP.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaHTTPStatsIndex

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.2011.5.25.111.4.1.1.45

nqaHTTPStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.2 · 1 row entry · 28 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaHTTPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaHTTPStatsTable'

The statistics collection database.
Defines the HTTP Operations Statistics Table for
storing the statistics of a HTTP test.

nqaHTTPStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.2.1

Defines an entry in the nqaHTTPStatsTable.

Indexes

Column Syntax OID

nqaHTTPStatsIndex

The The HTTP statistics table index and times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.2.1.1

nqaHTTPStatsCompletions

The status of HTTP test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.2.1.2

nqaHTTPStatsRTDOverThresholds

The number of HTTP operations RTD (Round Trip Delay) that violate threshold.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.3

nqaHTTPStatsRTTSum

The sum of delay time of successful HTTP probes, including the sum of time of DNS query,
TCP establishment and packets transmission.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.4

nqaHTTPStatsRTTMin

The minimum value of HTTP probe time.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.5

nqaHTTPStatsRTTMax

The maximum value of HTTP probe time.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.6

nqaHTTPStatsDNSRTTSum

The sum of DNS query time.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.7

nqaHTTPStatsDNSRTTMin

The minimum of DNS query time.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.8

nqaHTTPStatsDNSRTTMax

The maximum of DNS query time.

nqaHTTPStatsTCPConnectRTTSum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.9

The sum of TCP connection time.

nqaHTTPStatsTCPConnectRTTMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.10

The minimum value of TCP connection time.

nqaHTTPStatsTCPConnectRTTMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.11

The maximum value of TCP connection time.

nqaHTTPStatsTransactionRTTSum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.12

The sum of transaction time.

nqaHTTPStatsTransactionRTTMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.13

The minimum value of transaction time.

nqaHTTPStatsTransactionRTTMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.14

The maximum value of transaction time.

nqaHTTPStatsMessageBodyOctetsSum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.15

The sum of the size of the message body received as a
response to the HTTP request.

nqaHTTPStatsDNSServerTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.16

The number of requests that timed out during DNS query.

nqaHTTPStatsTCPConnectTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.17

The number of requests that timed out during HTTP connection.

nqaHTTPStatsTransactionTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.18

The number of requests that timed out during HTTP transaction.

nqaHTTPStatsDNSQueryErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.19

The number of requests that had DNS query errors.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.20

nqaHTTPStatsErrors

The number of HTTP transaction failures.

nqaHTTPStatsTcpConnErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.21

The number of TCP connection failures.

nqaHTTPStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.22

Number of responses received for the corresponding test. The value of this object
MUST be reported as 0 when no probe responses have been received.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.23

nqaHTTPStatsSendProbes

The number of sending probes.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.24

nqaHTTPStatsBusies

The number of occasions when a HTTP operation could not
be initiated because an internal error.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.25

nqaHTTPStatsTestFinished

The status of test execution.

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.2.1.26

nqaHTTPStatsRttAvg

The average of RTTs that were successfully measured by tests.

nqaHTTPStatsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.27

The ratio of the packets lost to all packets sent in the test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterStatsIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.2.1.28

nqaJitterStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.3 · 1 row entry · 81 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaJitterStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaJitterStatsTable'

Description: nqaJitterStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be ICMP, UDP, or TCP.

nqaJitterStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.3.1

A table which contains the status of latest Jitter operation.
This entry is created only if the nqaAdminCtrlType is jitterAppl.

Indexes

Column Syntax OID

nqaJitterStatsIndex

The third index of jitter statistics table.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.3.1.1

nqaJitterStatsCompletions

The result of the test, which value can be noResult (0),
success (1), failure (2) or negotiateFailed (3). If the test is still running,
the value will be noResult (0).

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure
3	negotiateFailed

.1.3.6.1.4.1.2011.5.25.111.4.3.1.2

nqaJitterStatsRTDOverThresholds

The number of tests that violate RTD (Round Trip Delay) threshold.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.3

nqaJitterStatsNumOfRTT

The number of RTTs that are successfully measured by tests.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.4

nqaJitterStatsRTTSum

The sum of RTTs that are successfully measured.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.5

nqaJitterStatsRTTSum2Low

The sum of squares of RTTs that are successfully measured by
tests (low order 32 bits).

nqaJitterStatsRTTSum2High

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.6

The sum of squares of RTTs that are successfully measured by
tests (high order 32 bits).

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.7

nqaJitterStatsRTTMin

The minimum of RTTs that were successfully measured by tests.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.8

nqaJitterStatsRTTMax

The maximum of RTTs that were successfully measured by tests.

nqaJitterStatsMinOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.9

The minimum of absolute value of all positive jitter values from source to destination.

nqaJitterStatsMaxOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.10

The maximum of absolute value of all positive jitter values from source to destination.

nqaJitterStatsNumOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.11

The number of all positive jitter values from source to destination.

nqaJitterStatsSumOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.12

The sum of absolute value of all positive jitter values from source to destination.

nqaJitterStatsSum2OfPositivesSDLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.13

The sum of squares of absolute value of all positive jitter values
from source to destination (low order 32 bits).

nqaJitterStatsSum2OfPositivesSDHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.14

The sum of squares of absolute value of all positive jitter values
from source to destination (high order 32 bits).

nqaJitterStatsMinOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.15

The minimum of absolute value of all negative jitter values from
source to destination.

nqaJitterStatsMaxOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.16

The maximum of absolute value of all negative jitter values from
source to destination.

nqaJitterStatsNumOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.17

The number of all negative jitter values from source to destination.

nqaJitterStatsSumOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.18

The sum of absolute value of all negative jitter values from source
to destination.

nqaJitterStatsSum2OfNegativesSDLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.19

The sum of squares of absolute value of all negative values from source
to destination (low order 32 bits).

nqaJitterStatsSum2OfNegativesSDHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.20

The sum of squares of absolute value of all negative values from source to
destination (high order 32 bits).

nqaJitterStatsMinOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.21

The minimum of absolute value of all positive jitter values from destination
to source.

nqaJitterStatsMaxOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.22

The maximum of absolute value of all positive jitter values from destination
to source.

nqaJitterStatsNumOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.23

The number of all positive jitter values from destination to source.

nqaJitterStatsSumOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.24

The sum of absolute value of all positive jitter values from destination
to source.

nqaJitterStatsSum2OfPositivesDSLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.25

The sum of squares of absolute value of all positive jitter values from
destination to source (low order 32 bits).

nqaJitterStatsSum2OfPositivesDSHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.26

The sum of squares of absolute value of all positive jitter values from
destination to source (high order 32 bits).

nqaJitterStatsMinOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.27

The minimum of absolute value of all negative jitter values from
destination to source.

nqaJitterStatsMaxOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.28

The maximum of absolute value of all negative jitter values from
destination to source.

nqaJitterStatsNumOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.29

The number of all negative jitter values from destination to source.

nqaJitterStatsSumOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.30

The sum of absolute value of all negative jitter values from destination
to source.

nqaJitterStatsSum2OfNegativesDSLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.31

The sum of squares of absolute value of all negative values from destination
to source (low order 32 bits).

nqaJitterStatsSum2OfNegativesDSHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.32

The sum of squares of absolute value of all negative values from destination
to source (high order 32 bits).

nqaJitterStatsPacketLossSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.33

The number of packets lost when sent from source to destination.

nqaJitterStatsPacketLossDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.34

The number of packets lost when sent from destination to source.

nqaJitterStatsPacketOutOfSequences

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.35

The number of packets arrived out of sequence.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.36

nqaJitterStatsErrors

The number of errors occurred in the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.37

nqaJitterStatsBusies

The number of occasions when a test couldn't be initialized
because the previous test has not completed.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.38

nqaJitterStatsTimeouts

The number of responses arrived over the time.

nqaJitterStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.39

The number of responses from echo-server for the packets sent
by the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.40

nqaJitterStatsSentProbes

The number of packets sent in the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.41

nqaJitterStatsDrops

The number of packets that were sent failed in the test.

nqaJitterStatsTestFinished

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.42

The status of the test, which value can be noFinish (0) or finish (1).

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.3.1.43

nqaJitterStatsMaxDelaySD

The maximum of all OWD (One Way Delay) from source to destination.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.44

nqaJitterStatsMaxDelayDS

The maximum of all OWD (One Way Delay) from destination to source.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.45

nqaJitterStatsRTTAvg

The average of RTTs that were successfully measured by tests.

nqaJitterStatsPacketLossRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.46

The ratio of the packets lost to all packets sent in the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.47

nqaJitterStatsAvgJitter

The average of jitter values that were successfully measured by tests.

nqaJitterStatsAvgJitterSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.48

The average of jitter values from source to destination that were
successfully measured by tests.

nqaJitterStatsAvgJitterDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.49

The average of jitter values from destination to source that were
successfully measured by tests.

nqaJitterStatsOWDOverThresholdsSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.50

nqaJitterStatsJitterOut

Jitter (RFC1889) at responder.

OctetString

.1.3.6.1.4.1.2011.5.25.111.4.3.1.51

nqaJitterStatsJitterIn

Jitter (RFC1889) at sender.

OctetString

.1.3.6.1.4.1.2011.5.25.111.4.3.1.52

The number of tests that violate OWD (One Way Delay) threshold from
source to destination.

nqaJitterStatsPktLossUnknown

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.53

The number of packets lost for which we cannot determine the direction.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.54

nqaJitterStatsNumOfOWD

The number of OWDs that were successfully measured by tests.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.55

nqaJitterStatsOWSumSD

The sum of OWDs that were successfully measured by tests from source
to destination.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.56

nqaJitterStatsOWSumDS

The sum of OWDs that were successfully measured by tests from
destination to source.

nqaJitterStatsOWDOverThresholdsDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.57

The number of tests that violate OWD (One Way Delay) threshold
from destination to source.

nqaJitterStatsOperOfIcpif

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.58

The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.59

nqaJitterStatsOperOfMos

The MOS (Mean Opinion Score) value for the latest jitter test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.60

nqaJitterStatsMinDelaySD

The minimum of all one way time from source to destination.

nqaJitterStatsSum2DelaySDLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.61

The low order 32 bits of the sum of squares of one way
time from source to destination.

nqaJitterStatsSum2DelaySDHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.62

The high order 32 bits of the sum of squares of one
way time from source to destination.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.63

nqaJitterStatsMinDelayDS

The minimum of all one way time from destination to source.

nqaJitterStatsSum2DelayDSLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.64

The low order 32 bits of the sum of squares of one way time
from destination to source.

nqaJitterStatsSum2DelayDSHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.65

The low order 32 bits of the sum of squares of one way time from destination to source.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.66

nqaJitterStatsTimeUnit

The unit of the timestamp, ms or us.

Enumeration

Enumerated Values:

1	us
2	ms

.1.3.6.1.4.1.2011.5.25.111.4.3.1.67

nqaJitterStatsAvgDelaySD

The average of one way time from source to destination.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.68

nqaJitterStatsAvgDelayDS

The average of one way time from destination to source.

nqaJitterStatsPktRewriteNum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.69

The number of packets have been rewrited.

nqaJitterStatsPktRewriteRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.70

The ratio of packets have been rewrited.

nqaJitterStatsPktDisorderNum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.71

The number of packets have been disordered.

nqaJitterStatsPktDisorderRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.72

The ratio of packets have been disordered.

nqaJitterStatsFragPktDisorderNum

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.73

The number of packets whose fragments have been disordered.

nqaJitterStatsFragPktDisorderRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.74

The ratio of packets whose fragments have been disordered.

nqaJitterStatsJitterOverThresholdsSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.75

The number of tests that violate jitter threshold from
source to destination.

nqaJitterStatsJitterOverThresholdsDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.76

The number of tests that violate jitter threshold from
destination to source.

nqaJitterStatsOverallOverThresholds

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.77

The number of tests that overall violate jitter threshold.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.78

nqaJitterStatsStartTime

This object indicates the time when the Jitter test started.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.79

nqaJitterStatsEndTime

This object indicates the time when the Jitter test ended.

nqaJitterStatsResultDetail

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.80

Indicates detailed result information about the test instance.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaFTPStatsIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.3.1.81

nqaFTPStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.4 · 1 row entry · 21 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaFTPStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaFTPStatsTable'

The statistics collection database.
Defines the FTP Operations Statistics Table for
storing the statistics of a FTP test.

nqaFTPStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.4.1

Defines an entry in the nqaFTPStatsTable.

Indexes

Column Syntax OID

nqaFTPStatsIndex

FTP statistics table index and times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.4.1.1

nqaFTPStatsCompletions

The status of FTP test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.4.1.2

nqaFTPStatsRTDOverThresholds

The times of successful statistics test RTD (Round Trip Delay) over the threshold.

nqaFTPStatsCtrlConnMaxTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.3

The maximum value of the control connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.4

nqaFTPStatsCtrlConnMinTime

The minimum value of the control connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.5

nqaFTPStatsCtrlConnAveTime

The average value of the control connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.6

nqaFTPStatsDataConnMaxTime

The maximum value of the data connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.7

nqaFTPStatsDataConnMinTime

The minimum value of the data connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.8

nqaFTPStatsDataConnAveTime

The average value of the data connection time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.9

nqaFTPStatsConnectSumTimeMax

The maximum value of the FTP probe time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.10

nqaFTPStatsConnectSumTimeMin

The mininum value of the FTP probe time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.11

nqaFTPStatsConnectSumTimeAve

The average value of the FTP probe time.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.12

nqaFTPStatsMessageBodyOctetsSum

The accumulated octets of a FTP test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.13

nqaFTPStatsErrors

The number of some other errors.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.14

nqaFTPStatsTimeouts

The number of occasions when a FTP operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.15

nqaFTPStatsDiscontinued

The number of occasions when a FTP test was interrupted by the user.

nqaFTPStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.16

Number of responses received for the corresponding test. The value of this object
MUST be reported as 0 when no probe responses have been received.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.17

nqaFTPStatsSendProbes

The number of sending probe

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.18

nqaFTPStatsTestFinished

The status of test execution.

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.4.1.19

nqaFTPStatsRttAvg

The average of RTTs that were successfully measured by tests.

nqaFTPStatsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.20

The ratio of the packets lost to all packets sent in the test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMpingStatsIndex nqaMpingStatsReceiverIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.4.1.21

nqaMpingStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.5 · 1 row entry · 24 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMpingStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMpingStatsTable'

The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test.

nqaMpingStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.5.1

Defines an entry in the nqaMpingStatsTable.

Indexes

Column Syntax OID

nqaMpingStatsIndex

The index of mping statistics table, and the times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.5.1.1

nqaMpingStatsReceiverIndex

The index of receiver ,that received the mping request packet and response the reply packet .

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.5.1.2

nqaMpingStatsTargetAddressType

The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16).

nqaMpingStatsTargetAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.5.1.3

The destination address .

nqaMpingStatsReceiverAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.5.1.4

The address of mping receiver

nqaMpingStatsRTDOverThresholds

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.5.1.5

nqaMpingStatsCompletions

The status of test.

Enumeration

Enumerated Values:

1	noResult
2	success
3	failure

.1.3.6.1.4.1.2011.5.25.111.4.5.1.6

The times of successful statistics test RTD (Round Trip Delay) over
the threshold.

nqaMpingStatsSumCompletionTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.7

The sum of RTT (response time) of sent packets.

nqaMpingStatsSumCompletionTime2Low

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.8

The low order 32 bits of the sum of squares of RTT (response time)
for each packet of test execution.

nqaMpingStatsSumCompletionTime2High

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.9

The high order 32 bits of the sum of squares
of RTT (response time) for each packet of test execution.

nqaMpingStatsCompletionTimeMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.10

The minimum RTT of all packets for executing a test.

nqaMpingStatsCompletionTimeMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.11

The maximum RTT of all packets in executing a test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.12

nqaMpingStatsTimeouts

The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.13

nqaMpingStatsBusies

The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure.

nqaMpingStatsSequenceErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.14

The times that sequence error happends.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.15

nqaMpingStatsDrops

The times probes of the test dropped due to sending or connecting failure .

nqaMpingStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.16

The number of received response packets.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.17

nqaMpingStatsSentProbes

The number of sent packets.

nqaMpingStatsLastGoodProbe

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.18

Date and time when the last response was received for a probe.

nqaMpingStatsTestFinished

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.5.1.19

The status of test execution.

Enumeration

Enumerated Values:

1	noFinish
2	finish

.1.3.6.1.4.1.2011.5.25.111.4.5.1.20

nqaMpingStatsReceiverCount

The current serial number of receivers.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.21

nqaMpingStatsLastFibHit

Whether the fib is hit on the device when receiving the last packet.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.4.5.1.22

nqaMpingStatsRttAvg

The average of RTTs that were successfully measured by tests.

nqaMpingStatsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.23

The ratio of the packets lost to all packets sent in the test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMtracertStatsIndex nqaMtracertStatsHopIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.5.1.24

nqaMtracertStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.6 · 1 row entry · 24 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMtracertStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMtracertStatsTable'

The statistics collection database.
Defines the Mping Operations Statistics Table for
storing the statistics of a Mping test.

nqaMtracertStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.6.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column Syntax OID

nqaMtracertStatsIndex

The index of mping statistics table, and the times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.6.1.1

nqaMtracertStatsHopIndex

The index of Mtracert hop

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.4.6.1.2

nqaMtracertStatsAddressType

The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.6.1.3

nqaMtracertStatsAddress

The destination address
(TraceRoute is the source address of the last valuable response package).

nqaMtracertStatsCompletions

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.6.1.4

The status of test.

Enumeration

Enumerated Values:

1	noResult
2	success
3	failure

.1.3.6.1.4.1.2011.5.25.111.4.6.1.5

nqaMtracertStatsCurHopCount

It is equal to the hop count index executed
by current tests. The default value is 0.

nqaMtracertStatsCurProbeCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.6

The total count of probe packets in a hop count index.

nqaMtracertStatsRTDOverThresholds

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.7

The times of successful statistics test RTD (Round Trip Delay) over the threshold.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.8

nqaMtracertStatsTimeouts

The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.9

nqaMtracertStatsBusies

The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure.

nqaMtracertStatsSequenceErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.10

The times that sequence error happends.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.11

nqaMtracertStatsDrops

The times probes of the test dropped due to sending or connecting failure .

nqaMtracertStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.12

The number of received response packets.

nqaMtracertStatsSentProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.13

The number of sent packets.

nqaMtracertStatsLastGoodProbe

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.14

Date and time when the last response was received for a probe.

nqaMtracertStatsLastGoodPath

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.6.1.15

The date and time when the last complete path was determined.

nqaMtracertStatsTestFinished

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.6.1.16

The status of test execution.

Enumeration

Enumerated Values:

1	noFinish
2	finish

.1.3.6.1.4.1.2011.5.25.111.4.6.1.17

nqaMtracertStatsCurPathTTL

The TTL(time to live) of the current path.

nqaMtracertStatsMaxPathTTL

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.18

The maximum TTL(time to live) of the path.

nqaMtracertStatsInPkgLossRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.19

The loss rate of the incoming packets.

nqaMtracertStatsSGPkgLossRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.20

The loss rate of the packets from source to multicast group.

nqaMtracertStatsInPkgRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.21

The rate of incoming packets.

nqaMtracertStatsOutPkgRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.22

The rate of outgoing packets.

nqaMtracertStatsTimeDelay

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.23

The time delay of packets from hop to hop.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaPathMtuStatsIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.6.1.24

nqaPathMtuStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.7 · 1 row entry · 14 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaPathMtuStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaPathMtuStatsTable'

The statistics collection database.
Defines the path MTU Operations Statistics Table for
storing the statistics of a path MTU test.

nqaPathMtuStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.7.1

Defines an entry in the nqaPathMtuStatsTable.

Indexes

Column Syntax OID

nqaPathMtuStatsIndex

The index of path MTU statistics table, and the times
of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.7.1.1

nqaPathMtuStatsAddressType

The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16).

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.7.1.2

nqaPathMtuStatsAddress

The destination address.
It is the source address of the ICMP echo reply packet.

nqaPathMtuStatsCompletions

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.7.1.3

The status of test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.7.1.4

nqaPathMtuStatsSentProbes

The number of sent packets.

nqaPathMtuStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.5

The number of received response packets.

nqaPathMtuStatsDiscoveryPathMtuMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.6

The initial length of packet in the path MTU test.
It is the minimal length of a ICMP packet.

nqaPathMtuStatsDiscoveryPathMtuMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.7

The maximal length of packet in the path MTU test.
It is the maximal MTU of local out-interface.

nqaPathMtuStatsOptimumFirstStep

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.8

The optimum first step of the path MTU test.
It will take effect if the specified step is lower than it.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.9

nqaPathMtuStatsBusies

The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.10

nqaPathMtuStatsTimeouts

The number of occasions when a NQA operation was not completed before a timeout occurred,
i.e. nqaAdminCtrlTimeOut was exceeded.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.11

nqaPathMtuStatsDrops

The times probes of the test dropped due to sending or connecting failure.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.12

nqaPathMtuStatsPathMtu

The value of current path MTU.

nqaPathMtuStatsTestFinished

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.7.1.13

The status of test execution.

Enumeration

Enumerated Values:

0	nofinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.7.1.14

nqaPathJitterStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.8 · 1 row entry · 61 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaPathJitterStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaPathJitterStatsTable'

A table which contains the status of latest path jitter operation.

nqaPathJitterStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.8.1

A table which contains the status of latest path jitter operation.
This entry is created only if the nqaAdminCtrlType is path jitter.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaPathJitterStatsIndex nqaPathJitterStatsHopIndex

Column Syntax OID

nqaPathJitterStatsIndex

The index of path jitter statistics table, and the times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.8.1.1

nqaPathJitterStatsHopIndex

The index of path jitter hop.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.4.8.1.2

nqaPathJitterStatsCompletions

The status of path jitter test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.8.1.3

nqaPathJitterStatsAddressType

The destination address type in a hop of path jitter test,
and the value range can be unknown(0), ipv4(1) and dns(16).

nqaPathJitterStatsAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.8.1.4

The destination address in a hop of path jitter test.

nqaPathJitterStatsRtdOverThresholds

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.8.1.5

The times of successful executions who's RTD over the threshold in a hop of path jitter test.

nqaPathJitterStatsNumOfRtt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.6

The times that statistics RTT successfully in a hop of path jitter test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.7

nqaPathJitterStatsRttSum

The sum of RTTs in a hop of path jitter test.

nqaPathJitterStatsRttSum2Low

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.8

The low order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.

nqaPathJitterStatsRttSum2High

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.9

The high order 32 bits of RTT's square sum that successfully measured in a hop of path jitter test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.10

nqaPathJitterStatsRttMin

The minimum of RTTs that successfully measured in a hop of path jitter test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.11

nqaPathJitterStatsRttMax

The maximum of RTTs that successfully measured in a hop of path jitter test.

nqaPathJitterStatsMinOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.12

The minimum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsMaxOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.13

The maximum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsNumOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.14

The number of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsSumOfPositivesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.15

The sum of positive values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsSum2OfPositivesSDLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.16

The low order 32 bits of square sum of positive values of jitter that
measured from packets sent from source to destination in a hop of path jitter test.

nqaPathJitterStatsSum2OfPositivesSDHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.17

The high order 32 bits of square sum of positive values of jitter that
measured from packets sent from source to destination in a hop of path jitter test.

nqaPathJitterStatsMinOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.18

The minimum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsMaxOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.19

The maximum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsNumOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.20

The number of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsSumOfNegativesSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.21

The sum of negative values of jitter that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsSum2OfNegativesSDLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.22

The low order 32 bits of square sum of negative values of jitter that
measured from packets sent from source to destination in a hop of path jitter test.

nqaPathJitterStatsSum2OfNegativesSDHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.23

The high order 32 bits of square sum of negative values of jitter that
measured from packets sent from source to destination in a hop of path jitter test.

nqaPathJitterStatsMinOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.24

The minimum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsMaxOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.25

The maximum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsNumOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.26

The number of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsSumOfPositivesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.27

The sum of positive values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsSum2OfPositivesDSLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.28

The low order 32 bits of square sum of positive values of jitter that
measured from packets sent from destination to source in a hop of path jitter test.

nqaPathJitterStatsSum2OfPositivesDSHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.29

The high order 32 bits of square sum of positive values of jitter that
measured from packets sent from destination to source in a hop of path jitter test.

nqaPathJitterStatsMinOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.30

The minimum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsMaxOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.31

The maximum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsNumOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.32

The number of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsSumOfNegativesDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.33

The sum of negative values of jitter that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsSum2OfNegativesDSLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.34

The low order 32 bits of square sum of negative values of jitter that
measured from packets sent from destination to source in a hop of path jitter test.

nqaPathJitterStatsSum2OfNegativesDSHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.35

The high order 32 bits of square sum of negative values of jitter that
measured from packets sent from destination to source in a hop of path jitter test.

nqaPathJitterStatsPacketLossSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.36

The number of dropped packets sent from source to destination in a hop of path jitter test.

nqaPathJitterStatsPacketLossDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.37

The number of dropped packets sent from destination to source in a hop of path jitter test.

nqaPathJitterStatsPacketOutOfSequences

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.38

The number of packets that return out of sequence.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.39

nqaPathJitterStatsErrors

The number of some other errors type.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.40

nqaPathJitterStatsBusies

The number of occasions when a path jitter operation could
not be initiated because an internal error.

nqaPathJitterStatsTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.41

The number of occasions when a NQA operation was not completed
before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded.

nqaPathJitterStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.42

The number of responses received for the corresponding test.
The value of this object MUST be reported as 0 when no probe responses have been received.

nqaPathJitterStatsSentProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.43

The value of this object reflects the number of packets sent for the corresponding test.
The value of this object MUST be reported as 0 when no probes have been sent.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.44

nqaPathJitterStatsDrops

The times probes of the test dropped due to sending failure.

nqaPathJitterStatsTestFinished

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.45

The status of test execution.

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.8.1.46

nqaPathJitterStatsMaxDelaySD

The maximum of all OWD (One Way Delay)
that measured from packets sent from source to destination in a hop of path jitter test.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.47

nqaPathJitterStatsMaxDelayDS

The maximum of all OWD (One Way Delay)
that measured from packets sent from destination to source in a hop of path jitter test.

millisecondsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.48

nqaPathJitterStatsRttAvg

The average of RTTs that were successfully measured in a hop of path jitter test.

nqaPathJitterStatsPacketLossRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.49

The ratio of the packets lost to all packets sent in a hop of path jitter test.

nqaPathJitterStatsAvgJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.50

The average of jitter values that were successfully measured in a hop of path jitter test.

nqaPathJitterStatsAvgJitterSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.51

The average value of jitters that measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsAvgJitterDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.52

The average value of jitters that measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsJitterOut

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.53

jitter (RFC1889) at responder.

OctetString

.1.3.6.1.4.1.2011.5.25.111.4.8.1.54

nqaPathJitterStatsJitterIn

Jitter (RFC1889) at sender.

OctetString

.1.3.6.1.4.1.2011.5.25.111.4.8.1.55

nqaPathJitterStatsOwdOverThresholdsSD

The number of tests that violate OWD (One Way Delay)
threshold from source to destination in a hop of path jitter test.

nqaPathJitterStatsPktLossUnknown

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.56

The number of lost packets for which we can't determine the direction
in a hop of path jitter test.

nqaPathJitterStatsNumOfOwd

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.57

The number of OWDs that were successfully measured in a hop of path jitter test.

nqaPathJitterStatsOwdSumSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.58

The sum of OWDs that were successfully measured from packets sent from
source to destination in a hop of path jitter test.

nqaPathJitterStatsOwdSumDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.59

The sum of OWDs that were successfully measured from packets sent from
destination to source in a hop of path jitter test.

nqaPathJitterStatsOwdOverThresholdsDS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.60

The number of tests that violate OWD (One Way Delay) threshold from destination to
source in a hop of path jitter test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaPppoeStatsIndex nqaPppoeRedialIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.8.1.61

nqaPppoeStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.9 · 1 row entry · 13 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaPppoeStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaPppoeStatsTable'

A table which contains the rolling accumulated history of the PPPoE operation.

nqaPppoeStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.9.1

A table which contains the rolling accumulated history of the PPPoE operation.
This entry is created only if the nqaAdminCtrlType is pppoe.

Indexes

Column Syntax OID

nqaPppoeStatsIndex

The index of PPPoE statistics table, and the executing times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.9.1.1

nqaPppoeRedialIndex

The index of PPPoE statistics table, and the redialing times of dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.9.1.2

nqaPppoeStatsCompletions

The status of PPPoE operation.

Enumeration

Enumerated Values:

1	dialupSuccess
2	dialupFail
3	stop
4	exceptionStop

.1.3.6.1.4.1.2011.5.25.111.4.9.1.3

nqaPppoeStatsCurrentPhase

The current phase of PPPoE operation.

Enumeration

Enumerated Values:

1	discovery
2	lcp
3	authorization
4	ncp
5	online
6	stop

.1.3.6.1.4.1.2011.5.25.111.4.9.1.4

nqaPppoeStatsErrorMessage

The error message result of PPPoE operation.

Enumeration

Enumerated Values:

1	other
2	timeout
3	paramNegotiateFail
4	userAuthenticationFail
5	peerDownRequest
255	noError

.1.3.6.1.4.1.2011.5.25.111.4.9.1.5

nqaPppoeDiscoveryTimeout

The time for discovery of PPPoE operation.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.6

nqaPppoeLcpTimeout

The time for lcp negotiate of PPPoE operation.

nqaPppoeAuthorizationTimeout

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.7

The time for authentication of PPPoE operation.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.8

nqaPppoeNcpTimeout

The time for ncp negotiate of PPPoE operation.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.9

nqaPppoeConnectionTime

The time for connection of PPPoE operation.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.10

nqaPppoeClientSessionId

The client sessionID of PPPoE operation.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.9.1.11

nqaPppoeClientIpAddress

The client ip address of PPPoE operation.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.9.1.12

nqaPppoeGatewayIpAddress

The gateway ip address of PPPoE operation.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaRtptestStatsIndex

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.9.1.13

nqaRtptestStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.10 · 1 row entry · 26 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaRtptestStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaRtptestStatsTable'

A table which contains the latest rtptest operation.

nqaRtptestStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.10.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column Syntax OID

nqaRtptestStatsIndex

The result table index and times of dispatching dependency tests.
Each test can only reserve 1 record. The result table only contains
rtptest information.

nqaRtptestStatsCompletions

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.4.10.1.1

The status of test.

Enumeration

Enumerated Values:

0	unknown
1	running
2	finished

.1.3.6.1.4.1.2011.5.25.111.4.10.1.2

nqaRtptestStatsIpTargetAddressType

The destination address type, and the value range can be unknown(0),
and ipv4(1).

nqaRtptestStatsIpTargetAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.10.1.3

The destination address of rtptest.

nqaRtptestStatsIpTargetPort

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.10.1.4

The target host port of rtptest.

nqaRtptestStatsSourceAddressType

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.4.10.1.5

The source address type, and the value range can be unknown(0),
and ipv4(1).

nqaRtptestStatsIpSourceAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.10.1.6

The source address of rtptest.

nqaRtptestStatsIpSourcePort

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.10.1.7

The source port of rtptest.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.4.10.1.8

nqaRtptestStatsMinRtt

The min of RTT that are successfully measured.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.9

nqaRtptestStatsMaxRtt

The max of RTT that are successfully measured.

nqaRtptestStatsAverageRtt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.10

The average of RTTs that are successfully measured.

nqaRtptestStatsProbeResponses

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.11

The number of responses from echo-server for the packets sent
by the test.

nqaRtptestStatsSentProbes

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.12

The number of the packets sent by the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.13

nqaRtptestStatsMaxJitter

The max of jitter value that are successfully measured.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.14

nqaRtptestStatsMinJitter

The min of jitter value that are successfully measured.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.15

nqaRtptestStatsAvgJitter

The average of jitter value that are successfully measured.

nqaRtptestStatsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.16

The ratio of the packets lost to all packets sent in the test.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.17

nqaRtptestStatsSumRtt

The sum of RTTs that are successfully measured.

nqaRtptestStatsMinDelaySD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.18

The minimum of One Way Delay from source to destination.

nqaRtptestStatsMaxDelaySD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.19

The maximum of One Way Delay from source to destination.

nqaRtptestStatsAvgDelaySD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.20

The average of One Way Delay from source to destination.

nqaRtptestStatsMinJitterSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.21

The minimum of jitter value from source to destination.

nqaRtptestStatsMaxJitterSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.22

The maximum of jitter value from source to destination.

nqaRtptestStatsAvgJitterSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.23

The average of jitter value from source to destination.

nqaRtptestStatsLossRateSD

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.24

The ratio of the packets lost to all packets from source to destination.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.25

nqaRtptestStatsIPDVSD

The IPDV(Inter Packet Delay Variation) value from source to destination.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaRtplistenStatsIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.10.1.26

nqaRtplistenStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.11 · 1 row entry · 14 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaRtplistenStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaRtplistenStatsTable'

Defines the test Results Extend Table for providing
the capability of performing test operations at
a middle host.  The results of these operations are
stored in the nqaRtplistenStatsTable . The operation of this 
table is same as that of nqaResultsTable.

nqaRtplistenStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.11.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column Syntax OID

nqaRtplistenStatsIndex

The result table index and times of dispatching dependency tests.
Each test can only reserve 1 records.

nqaRtplistenStatsCompletions

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.4.11.1.1

The status of test.

Enumeration

Enumerated Values:

0	unknown
1	running
2	finished

.1.3.6.1.4.1.2011.5.25.111.4.11.1.2

nqaRtplistenStatsIpTargetAddressType

The destination address type, and the value range can be unknown(0),
and ipv4(1)

nqaRtplistenStatsIpTargetAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.11.1.3

The destination address of rtpsnoop.

nqaRtplistenStatsIpTargetPort

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.11.1.4

The target host port of rtpsnoop.

nqaRtplistenStatsSourceAddressType

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.4.11.1.5

The source address type, and the value range can be unknown(0),
and ipv4(1).

nqaRtplistenStatsIpSourceAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.11.1.6

The source address of rtpsnoop.

nqaRtplistenStatsIpSourcePort

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.11.1.7

The source port of rtpsnoop.

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.2011.5.25.111.4.11.1.8

nqaRtplistenStatsDSField

The Differentiated Services (DS) field in the IP packet. The DS
field is defined as the Type Of Service (TOS) octet in IPv4 header or as
the Traffic Class octet in IPv6 header.

nqaRtplistenStatsMaxJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.9

The max of jitter value that are successfully measured.

nqaRtplistenStatsMinJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.10

The min of jitter value that are successfully measured.

nqaRtplistenStatsAvgJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.11

The average of jitter value that are successfully measured.

nqaRtplistenStatsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.12

The ratio of the packets lost to all packets sent in the test.

nqaRtplistenStatsMaxLostPacketNumber

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.13

The max of lost packet during the test running.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaGeneralflowStatsIndex nqaGenralflowStatsFrameSizeId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.11.1.14

nqaGeneralflowStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.12 · 1 row entry · 32 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaGeneralflowStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaGeneralflowStatsTable'

Defines the test Results Extend Table for testing throughput of network.
The results of these operations are stored in the nqaGeneralflowStatsTable.

nqaGeneralflowStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.12.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column Syntax OID

nqaGeneralflowStatsIndex

This object indicates the index of the result table of the generalflow test.

nqaGenralflowStatsFrameSizeId

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.4.12.1.1

Indicates the index of the packet size in the Generalflow statistics table. An index corresponds to a packet size.

nqaGeneralflowStatsCompletions

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.4.12.1.2

Indicates whether the Generalflow test instance has completed the current packet size test.
noResult (0) indicates that the current packet size test is running.
success(1) indicates that the current packet size test ha…

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure
3	finished
4	running
5	ready

.1.3.6.1.4.1.2011.5.25.111.4.12.1.3

nqaGeneralflowStatsResultDetail

Indicates detailed information about the current packet size test in the Generalflow test instance.

nqaGeneralflowStatsTxRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.4

Indicates the rate at which packets with the current size are sent in the Generalflow test instance, in Kbps.

nqaGeneralflowStatsRxRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.5

Indicates the rate at which packets with the current size are received in the Generalflow test instance, in Kbps.

nqaGeneralflowStatsMinRtt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.6

Indicates the minimum RTT of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsMaxRtt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.7

Indicates the maximum RTT of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsAverageRtt

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.8

Indicates the average RTT of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsMaxJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.9

Indicates the maximum two-way jitter of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsMinJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.10

Indicates the minimum two-way jitter of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsAvgJitter

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.11

Indicates the average two-way jitter of the current packet size test in the Generalflow test instance, in us.

nqaGeneralflowStatsTxCountLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.12

Indicates the lower 32 bit of the number of packets with the current packet size sent in the Generalflow test instance.

nqaGeneralflowStatsTxCountHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.13

Indicates the higher 32 bit of the number of packets with the current packet size sent in the Generalflow test instance.

nqaGeneralflowStatsRxCountLow

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.14

Indicates the lower 32 bit of the number of packets with the current packet size received in the Generalflow test instance.

nqaGeneralflowStatsRxCountHigh

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.15

Indicates the higher 32 bit of the number of packets with the current packet size received in the Generalflow test instance.

nqaGeneralflowStatsFrameLossRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.16

Indicates the packet loss ratio of the current packet size test in the Generalflow test instance,when precision is 10e-4.

nqaGeneralflowStatsPrecision

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.17

Indicates the precision of the current packet size test in the Generalflow test instance.

nqaGeneralflowStatsThroughput

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.18

Indicates the throughput of the current packet size test in the Generalflow test instance.

nqaGeneralflowStatsDataSize

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.19

Indicates the packet size of the current packet size test in the Generalflow test instance.

nqaGeneralflowStatsTestStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.20

Indicates whether the tests of all packet sizes in the Generalflow test instance have completed.

Enumeration

Enumerated Values:

0	running
1	finished

.1.3.6.1.4.1.2011.5.25.111.4.12.1.21

nqaGeneralflowStatsFrameLossRatePrecision

Indicates the packet loss ratio precision of the current packet size test in the Generalflow test instance.
0 indicates in 10e-4.
1 indicates in 10e-9.

nqaGeneralflowStatsFrameLossRatePrecisionValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.22

Indicates the packet loss ratio value of the current packet size test in the Generalflow test instance.

nqaGeneralflowStatsStartTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.23

This object indicates the time when the Generalflow test started.

nqaGeneralflowStatsEndTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.24

This object indicates the time when the Generalflow test ended.

nqaGeneralflowStatsTestTotalTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.25

This object indicates the total time (in seconds) used by the Generalflow test.

nqaGeneralflowStatsTestRemainingTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.26

This object indicates the remaining time (in seconds) used by the Generalflow test.

nqaGeneralflowStatsTestTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.27

This object indicates the time (in seconds) used by the Generalflow test.

nqaGeneralflowStatsEstimatedTestTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.28

This object indicates the estimated time (in seconds) used by the Generalflow test.

nqaGeneralflowStatsRealTestTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.29

This object indicates the real time (in seconds) used by the Generalflow test.

nqaGeneralflowStatsFrameRate

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.30

This object indicates an Ethernet frame rate in the Generalflow test.
1: utilized line rate (L1 rate).
2: information rate (L2 rate).

Enumeration

Enumerated Values:

1	l1
2	l2

.1.3.6.1.4.1.2011.5.25.111.4.12.1.31

nqaGeneralflowStatsCurrentRateCount

This object indicates the count of current rate for throughput used by the Generalflow test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaGeneralflowStatsIndex nqaGenralflowStatsFrameSizeId nqaGeneralflowCurrentStatsRateIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.12.1.32

nqaGeneralflowCurrentStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.13 · 1 row entry · 3 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaGeneralflowCurrentStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaGeneralflowCurrentStatsTable'

Defines the current test results for generalflow test type.
The results of these operations are stored in the nqaGeneralflowCurrentStatsTable.

nqaGeneralflowCurrentStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.13.1

The operation of this table is same as that of nqaResultsTable.

Indexes

Column	Syntax	OID
nqaGeneralflowCurrentStatsRateIndex This object indicates the index of the current result table of the generalflow test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.13.1.1`
nqaGeneralflowCurrentStatsThroughput Indicates the current throughput of each packet size test in the Generalflow test instance.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.13.1.2`
nqaGeneralflowCurrentStatsFrameLossRate Indicates the current packet loss ratio of each packet size test in the Generalflow test instance, when precision is 10e-4.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.13.1.3`

nqaEthernetServiceStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.14 · 1 row entry · 32 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaEthernetServiceStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaEthernetServiceStatsTable'

The statistics collection database.
Defines the Y.1564 Operations Statistics Table for storing the statistics of a Y.1564 test.

nqaEthernetServiceStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.14.1

A table which contains the status of latest Y.1564 operation. The operation of this table is same as that of nqaResultsTable.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaEthernetServiceStatsIndex nqaEthernetServiceStatsTestFlowId nqaEthernetServiceStatsTestStep

Column	Syntax	OID
nqaEthernetServiceStatsIndex The index of the result table of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.1`
nqaEthernetServiceStatsTestFlowId The test flow ID of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.2`
nqaEthernetServiceStatsTestStep The index of the result table of EthernetService test step. 0: cir simple test. 1: cir step test(25% CIR). 2: cir step test(50% CIR). 3: cir step test(75% CIR). 4: cir step test(100% CIR). 5: cir/eir test with color b…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.3`
nqaEthernetServiceStatsTestProcess The status of Y.1564 test. 0 indicates running 1 indicates finished 2 indicates unknown	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.4`
nqaEthernetServiceStatsTestStatus The result of Y.1564 test. 0 indicates pass, 1 indicates failed, 2 indicates abort, 3 indicates abnormal, 4 indicates initial	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.5`
nqaEthernetServiceStatsTestFlowNum The number of test flow	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.6`
nqaEthernetServiceStatsTestMode The test mode of Y.1564 test. 0 indicates roundtrip mode.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.7`
nqaEthernetServiceStatsTestBeginTime The begining time of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.8`
nqaEthernetServiceStatsTestEndTime The ending time of Y.1564 test	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.9`
nqaEthernetServiceStatsTestTotalTime The total time of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.10`
nqaEthernetServiceStatsTestRealTime The real test time of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.11`
nqaEthernetServiceStatsResultDetail The detailed result of Y.1564 test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.12`
nqaEthernetServiceStatsTestPhase Phases of Y.1564 test. 0 indicates configuration test. 1 indicates performance test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.13`
nqaEthernetServiceStatsFlowBeginTime The begining time of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.14`
nqaEthernetServiceStatsFlowEndTime The ending time of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.15`
nqaEthernetServiceStatsDisorderPacketsNum The number of disorder packets.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.16`
nqaEthernetServiceStatsFlowResult The result of the test flow. 0 indicates pass. 1 indicates failed. 2 indicates abort. 3 indicates abnormal. 4 indicates initial.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.17`
nqaEthernetServiceStatsFlowMinIR The min IR of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.18`
nqaEthernetServiceStatsFlowMaxIR The max IR of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.19`
nqaEthernetServiceStatsFlowMeanIR The mean IR of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.20`
nqaEthernetServiceStatsFlowMinFTD The min FTD of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.21`
nqaEthernetServiceStatsFlowMaxFTD The max FTD of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.22`
nqaEthernetServiceStatsFlowMeanFTD The mean FTD of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.23`
nqaEthernetServiceStatsFlowMinFDV The min FDV of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.24`
nqaEthernetServiceStatsFlowMaxFDV The max FDV of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.25`
nqaEthernetServiceStatsFlowMeanFDV The mean FDV of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.26`
nqaEthernetServiceStatsFlowFlCount The frame loss count of the test flow.	OctetString Constraints: `range: 0-64`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.27`
nqaEthernetServiceStatsFlowFLRPrecision The FLR precision of the test flow. 0 indicates in 10e-5.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.28`
nqaEthernetServiceStatsFlowFLR The FLR of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.29`
nqaEthernetServiceStatsFlowUnavailCount The unavail count of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.30`
nqaEthernetServiceStatsFlowAvailPrecision The avail precision of the test flow. 0 indicates in 10e-5.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.31`
nqaEthernetServiceStatsFlowAVAIL The avail value of the test flow.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.14.1.32`

nqaJitterLatestStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.15 · 1 row entry · 11 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaJitterLatestStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaJitterLatestStatsTable'

nqaJitterLatestStatsTable describes statistics about network status detection using probe packets. The network delay jitter can be calculated after multiple times of statistics collection.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the test instance type is jitter.

nqaJitterLatestStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.15.1

A table which contains the status of latest Jitter operation.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMultiPathResultsIndex nqaMultiPathResultsPathIndex nqaMultiPathResultsHopIndex

Column	Syntax	OID
nqaJitterLatestStatsMaxDelaySD The maximum of all OWD (One Way Delay) from source to destination.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.1`
nqaJitterLatestStatsMaxDelayDS The maximum of all OWD (One Way Delay) from destination to source.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.2`
nqaJitterLatestStatsAvgDelaySD The average of one way time from source to destination.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.3`
nqaJitterLatestStatsAvgDelayDS The average of one way time from destination to source.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.4`
nqaJitterLatestStatsRTTMin The minimum of RTTs that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.5`
nqaJitterLatestStatsRTTMax The maximum of RTTs that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.6`
nqaJitterLatestStatsRTTAvg The average of RTTs that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.7`
nqaJitterLatestStatsPacketLossRatio The ratio of the packets lost to all packets sent in the test.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.8`
nqaJitterLatestStatsAvgJitter The average of jitter values that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.9`
nqaJitterLatestStatsAvgJitterSD The average of jitter values from source to destination that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.10`
nqaJitterLatestStatsAvgJitterDS The average of jitter values from destination to source that were successfully measured by tests.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.4.15.1.11`

nqaMultiPathResultsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.16 · 1 row entry · 35 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMultiPathResultsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMultiPathResultsTable'

Description: This table describes result information of a test instance.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the following conditions are met.
A GET operation is performed.
The test instance type must be LSPPING, or LSPTRACE.
The nqaMultiPathResultsIndex , nqaMultiPathResultsPathIndex and nqaMultiPathResultsHopIndex values must be 0.

nqaMultiPathResultsEntry row .1.3.6.1.4.1.2011.5.25.111.4.16.1

The operation of this table is same as that of nqaMultiPathResultsTable.

Indexes

Column Syntax OID

nqaMultiPathResultsIndex

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.4.16.1.1

nqaMultiPathResultsPathIndex

The path index.

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.5.25.111.4.16.1.2

nqaMultiPathResultsHopIndex

The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.111.4.16.1.3

nqaMultiPathResultsCompletions

The status of test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.16.1.4

nqaMultiPathResultsTestAttempts

testsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.5

nqaMultiPathResultsCurHopCount

It is equal to the hop count index executed
by current Traceroute or LSP Traceroute tests.
Ping/LSP Ping does not use this entry. The default value is 0.

hopsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.6

nqaMultiPathResultsCurProbeCount

The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index.

probesSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.7

nqaMultiPathResultsRTDOverThresholds

The times of successful statistics test RTD (Round Trip Delay)
over the threshold.

nqaMultiPathResultsSumCompletionTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.8

nqaMultiPathResultsSumCompletionTime2Low

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.9

nqaMultiPathResultsSumCompletionTime2High

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.10

nqaMultiPathResultsCompletionTimeMin

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.11

The minimum RTT (for Traceroute and LSP Traceroute,
it is the minimum RTT among all the packet of next hop) of all packets for executing a test.

nqaMultiPathResultsCompletionTimeMax

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.12

The maximum RTT (for Traceroute and LSP Traceroute,
it is the maximum RTT among all the packets of next hop) of all packets in executing a test.

nqaMultiPathResultsDisconnects

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.13

The times of consecutive failures. For connectionless protocol type of test, this number should be zero.

nqaMultiPathResultsTimeouts

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.14

The number of occasions when a NQA operation was not
completed before a timeout occurred, i.e.
nqaAdminCtrlTimeOut was exceeded.

nqaMultiPathResultsBusies

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.15

The times of failure to apply resource due to the busy system.
such as apply memory or create socket failure.

nqaMultiPathResultsNoConnections

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.16

nqaMultiPathResultsSequenceErrors

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.17

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.18

nqaMultiPathResultsDrops

The times probes of the test dropped due to sending or connecting failure.

nqaMultiPathResultsAddressType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.19

The destination address type, and the value range can be unknown(0),
ipv4(1) and dns(16).

nqaMultiPathResultsAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.4.16.1.20

The destination address (TraceRoute is the destination address of each hop,
and ping is the destination address of tests).

nqaMultiPathResultsProbeResponses

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.16.1.21

Number of responses received for the corresponding
test. The value of this object
MUST be reported as 0 when no probe responses have been
received.

responsesSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.22

nqaMultiPathResultsSentProbes

The value of this object reflects the number of probes sent
for the corresponding test.
The value of this object MUST be reported as 0 when no probes
have been sent.

probesSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.23

nqaMultiPathResultsLastGoodProbe

Date and time when the last response was received for a probe.

nqaMultiPathResultsLastGoodPath

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.16.1.24

The date and time when the last complete path was determined.

nqaMultiPathResultsTestFinished

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.4.16.1.25

The status of test execution.

Enumeration

Enumerated Values:

0	noFinish
1	finish

.1.3.6.1.4.1.2011.5.25.111.4.16.1.26

nqaMultiPathResultsRttAvg

The average of RTTs that were successfully measured by tests.

nqaMultiPathResultsLostPacketRatio

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.27

The ratio of the packets lost to all packets sent in the test.

nqaMultiPathResultsSrPolicyPreference

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.28

The preference of the segment list.

nqaMultiPathResultsSrPolicyPathType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.29

The path type of the segment list.

Enumeration

Enumerated Values:

0	backup
1	main
255	unknown

.1.3.6.1.4.1.2011.5.25.111.4.16.1.30

nqaMultiPathResultsSrPolicyProtocol

The protocol of the segment list.

Enumeration

Enumerated Values:

10	pecp
20	bgp
30	local
255	unknown

.1.3.6.1.4.1.2011.5.25.111.4.16.1.31

nqaMultiPathResultsSrPolicyNodeAddress

The destination address of the segment list.

nqaMultiPathResultsSrPolicyDiscriminator

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.16.1.32

The discriminator of the segment list.

nqaMultiPathResultsSrPolicySegListId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.33

The id of the segment list.

nqaMultiPathResultsSrPolicyXcIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.34

The xc index of the segment list.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.16.1.35

nqaLatestStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.4.17 · 1 row entry · 4 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaLatestStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaLatestStatsTable'

nqaLatestStatsTable describes statistics about the latest network status detection using probe packets.
Creation restrictions: No entry can be created in this table.
Modification restrictions: The entries in this table cannot be modified.
Deletion restrictions: The entries in this table cannot be deleted.
Access restrictions: The entries in this table can be accessed only when the test instance type is icmp.

nqaLatestStatsEntry row .1.3.6.1.4.1.2011.5.25.111.4.17.1

The operation of this table is same as that of nqaLatestStatsTable.

Indexes

nqaLatestResultsCompletions

Column Syntax OID

The latest status of the test.

Enumeration

Enumerated Values:

0	noResult
1	success
2	failure

.1.3.6.1.4.1.2011.5.25.111.4.17.1.1

nqaLatestResultsDstAddress

The latest destination address in the test.

nqaLatestResultSrcAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.17.1.2

The latest source address in the test.

nqaLatestResultsLostPacketRatio

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.4.17.1.3

The ratio of the packets lost to all packets sent in the test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaHistoryIndex nqaHistoryHopIndex nqaHistoryProbeIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.4.17.1.4

nqaHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.1 · 1 row entry · 9 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaHistoryTable'

Defines the Remote Operations test History Table for
storing the results of a test operation.

nqaHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.1.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

Column Syntax OID

nqaHistoryIndex

The history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.1.1.1

nqaHistoryHopIndex

The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.1.1.2

nqaHistoryProbeIndex

The probe index of tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.1.1.3

nqaHistoryTimeStamp

The start time stamp of a probe.

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.1.1.4

nqaHistoryAddressType

The address type of history records.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.1.1.5

nqaHistoryAddress

The destination address of tests. For Traceroute, it is the destination address of each hop.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.1.1.6

nqaHistoryCompletionTime

The amount of time from when a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.1.1.7

nqaHistoryFinishState

The result of a test operation made by a remote
host for a particular probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	drop
4	busy
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.1.1.8

nqaHistoryLastRC

The last implementation method specific reply code received.
If the ICMP Echo capability is being used then a successful
probe ends when an ICMP response is received that contains
the code ICMP_ECHOREPLY(0). The ICMP r…

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMpingHistoryIndex nqaMpingHistoryReceiverIndex nqaMpingHistoryResponseIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.1.1.9

nqaMpingHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.2 · 1 row entry · 11 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMpingHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMpingHistoryTable'

Defines the Remote Operations Mping test History Table for
storing the results of a test operation.

nqaMpingHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.2.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

Column Syntax OID

nqaMpingHistoryIndex

The Mping history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.2.1.1

nqaMpingHistoryReceiverIndex

The index of receiver ,that received mping request packets and response reply packets .

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.2.1.2

nqaMpingHistoryResponseIndex

The index of response packets send by receiver

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.2.1.3

nqaMpingHistoryAddressType

The address type of history records.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.2.1.4

nqaMpingHistoryAddress

The destination address of tests.

nqaMpingHistoryReceiverAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.2.1.5

The source address of response package of tests.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.2.1.6

nqaMpingHistoryTimeStamp

The start time stamp of a probe.

nqaMpingHistoryCompletionTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.2.1.7

The completion time of a probe in milliseconds.

millisecondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.2.1.8

nqaMpingHistoryFinishState

The result of a test operation made by a remote
host for a particular probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	drop
4	busy
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.2.1.9

nqaMpingHistoryLastRC

The last reply code received.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.2.1.10

nqaMpingHistoryFibHit

Whether the fib is hit on the device which received the packet.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMtracertHistoryIndex nqaMtracertHistoryHopIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.2.1.11

nqaMtracertHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.3 · 1 row entry · 19 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMtracertHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMtracertHistoryTable'

Defines the Remote MtracertOperations test History Table for
storing the results of a test operation.

nqaMtracertHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.3.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

Column Syntax OID

nqaMtracertHistoryIndex

The Mtracert history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.3.1.1

nqaMtracertHistoryHopIndex

The index of Mtracert hop.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.3.1.2

nqaMtracertHistoryAddressType

The address type of history records.

nqaMtracertHistoryAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.3.1.3

The destination address of tests. For Traceroute, it is the destination address of each hop.

nqaMtracertHistoryTimeStamp

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.3.1.4

The start time stamp of a probe.

nqaMtracertHistoryCompletionTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.3.1.5

The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.

millisecondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.3.1.6

nqaMtracertHistoryLastRC

nqaMtracertHistoryCurQueryMode

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.3.1.7

The current query mode.

Enumeration

Enumerated Values:

1	maxHops
2	hopByHop

.1.3.6.1.4.1.2011.5.25.111.5.3.1.8

nqaMtracertHistoryQueryArrivalTime

The Query Arrival Time is a 32-bit NTP timestamp specifying
the arrival time of the traceroute request packet at this router.

nqaMtracertHistoryIncomingIfAddress

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.3.1.9

This field specifies the address of the interface on which packets from
this source and group are expected to arrive, or 0 if unknown.

nqaMtracertHistoryOutgoingIfAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.3.1.10

This field specifies the address of the interface on which packets from this source
and group flow to the specified destination, or 0 if unknown.

nqaMtracertHistoryPreHopRouterAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.3.1.11

This field specifies the router from
which this router expects packets from this source.

nqaMtracertHistoryInputPacketCount

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.3.1.12

This field contains the number of multicast packets received for
all groups and sources on the incoming interface, or 0xffffffff if
no count can be reported. This counter should have the same
value as ifInMulticastP…

nqaMtracertHistoryOutputPacketCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.3.1.13

This field contains the number of multicast packets that have
been transmitted or queued for transmission for all groups and
sources on the outgoing interface, or 0xffffffff if no count can
be reported. This counter s…

nqaMtracertHistoryTotalSGPacketCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.3.1.14

This field counts the number of packets from the specified source
forwarded by this router to the specified group, or 0xffffffff if
no count can be reported. This counter should have the same value as
ipMRoutePkts fr…

nqaMtracertHistoryRtgProtocol

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.3.1.15

This field describes the routing protocol in use between this
router and the previous-hop router.

Enumeration

Enumerated Values:

1	dvmrp
2	mospf
3	pim
4	cbt
5	pimUsingSpecRteTab
6	pimUsingStaticRte
7	dvmrpUsingStaticRte
8	pimUsingMBGPRte
9	cbtUsingSpecRteTab
10	cbtUsingStaticRte
11	pimUsingState
255	unknownProtocol

.1.3.6.1.4.1.2011.5.25.111.5.3.1.16

nqaMtracertHistoryFwdTTL

This field contains the TTL that a packet is required to
have before it will be forwarded over the outgoing interface.

nqaMtracertHistoryFwdCode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.3.1.17

This field contains a forwarding information/error code.
noError(1): No error
wrongIf(2): Traceroute request arrived on an interface to
which this router would not forward for this
source,group,destination.
…

Enumeration

Enumerated Values:

1	noError
2	wrongIf
3	pruneSent
4	pruneRCVD
5	scoped
6	noRoute
7	wrongLastHop
8	notForwarding
9	reachedRP
11	noMulticast
12	infoHidden
130	noSpace
131	oldRouter
132	adminProhib
255	unknownError

.1.3.6.1.4.1.2011.5.25.111.5.3.1.18

nqaMtracertHistroyFinishState

The finish state of a probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	busy
4	drop
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.3.1.19

nqaVplsMacTracertHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.4 · 1 row entry · 11 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaVplsMacTracertHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaVplsMacTracertHistoryTable'

Defines the VPLS mac trace Operations test History Table for
storing the results of a test operation.

nqaVplsMacTracertHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.4.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaVplsMacTracertHistoryIndex nqaVplsMacTracertHistoryHopIndex nqaVplsMacTracertHistoryResponseIndex

Column Syntax OID

nqaVplsMacTracertHistoryIndex

The VPLS mac trace history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.4.1.1

nqaVplsMacTracertHistoryHopIndex

The index of VPLS mac trace hop.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.4.1.2

nqaVplsMacTracertHistoryResponseIndex

The index of VPLS mac trace reply packet per hop.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.4.1.3

nqaVplsMacTracertHistoryTimeStamp

The start time stamp of a probe.

nqaVplsMacTracertHistoryAddressType

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.4.1.4

The address type of history records.

nqaVplsMacTracertHistoryAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.4.1.5

The destination address of tests. For Traceroute, it is the destination address of each hop.

nqaVplsMacTracertHistoryCompletionTime

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.4.1.6

The completion time of a probe in milliseconds.
The amount of time measured in milliseconds from when
a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 w…

millisecondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.4.1.7

nqaVplsMacTracertHistoryFinishState

The finish state of a probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	drop
4	busy
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.4.1.8

nqaVplsMacTracertHistoryHitFlag

Hit Flag.

nqaVplsMacTracertHistoryDSCount

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.4.1.9

The count of Downstreams.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.4.1.10

nqaVplsMacTracertHistorySuccessPathNode

This object indicates whether it is a node along the path that passes the Trace test. By default, the value is false, indicating that the object is not a node along the path that passes the Trace test.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaVplsMacTracertHistoryIndex nqaVplsMacTracertHistoryHopIndex nqaVplsMacTracertHistoryResponseIndex nqaVplsMacTracertHistoryDSIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.4.1.11

nqaVplsMacTracertHistoryDSTable

table

.1.3.6.1.4.1.2011.5.25.111.5.5 · 1 row entry · 2 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaVplsMacTracertHistoryDSTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaVplsMacTracertHistoryDSTable'

Defines the VPLS mac trace Operations test History Downstreanm Table for
storing the results of a test operation.

nqaVplsMacTracertHistoryDSEntry row .1.3.6.1.4.1.2011.5.25.111.5.5.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

Column	Syntax	OID
nqaVplsMacTracertHistoryDSIndex The VPLS mac trace history DS table index.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.2011.5.25.111.5.5.1.1`
nqaVplsMacTracertHistoryDSAddress DS address.	INET-ADDRESS-MIBInetAddress Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.2011.5.25.111.5.5.1.2`

nqaVplsMTraceHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.6 · 1 row entry · 27 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaVplsMTraceHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaVplsMTraceHistoryTable'

Defines the remote vpls multicast trace operations test history table for
storing the results of a test operation.

nqaVplsMTraceHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.6.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaVplsMTraceHistoryIndex nqaVplsMTraceHistoryHopIndex nqaVplsMTraceHistoryResponseIndex

Column Syntax OID

nqaVplsMTraceHistoryIndex

The vpls multicast trace history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.6.1.1

nqaVplsMTraceHistoryHopIndex

The index of vpls multicast trace hop.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.6.1.2

nqaVplsMTraceHistoryResponseIndex

The index of vpls multicast trace responser.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.6.1.3

nqaVplsMTraceHistoryResponserAddressType

The type of history record's Responser address.

nqaVplsMTraceHistoryResponserAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.6.1.4

The Responser address of tests.

nqaVplsMTraceHistoryUpStreamAddressType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.6.1.5

The type of history records' last hop address.

nqaVplsMTraceHistoryUpStreamAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.6.1.6

The last hop address of tests.

nqaVplsMTraceHistoryReceivedTtl

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.6.1.7

The value of ttl in the received packet.

time-to-live valueUnsigned32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.6.1.8

nqaVplsMTraceHistoryIGMPVersion

The IGMP protocol version.

Enumeration

Enumerated Values:

1	igmpv1
2	igmpv2
3	igmpv3

.1.3.6.1.4.1.2011.5.25.111.5.6.1.9

nqaVplsMTraceHistoryIGMPSnpgEnable

The IGMP snooping enable state.

nqaVplsMTraceHistoryIGMPProxyEnable

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.5.6.1.10

The IGMP proxy enable switch.

nqaVplsMTraceHistoryIGMPRouterPortLearningEnable

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.5.6.1.11

The IGMP router port learning enable switch.

nqaVplsMTraceHistoryRequireRouterAlertEnable

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.5.6.1.12

The route alert requirement enable switch.

nqaVplsMTraceHistoryForwardMode

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.5.25.111.5.6.1.13

The forward mode value.

Enumeration

Enumerated Values:

1	mac
2	ip

.1.3.6.1.4.1.2011.5.25.111.5.6.1.14

nqaVplsMTraceHistoryHitFlag

Whether the fib is hit on the device which received the packet.

nqaVplsMTraceHistoryPWExist

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.6.1.15

Whether the forward PW is exist.

nqaVplsMTraceHistoryGroupPolicy

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.6.1.16

The ACL judge result.

Enumeration

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.2011.5.25.111.5.6.1.17

nqaVplsMTraceHistoryCACExist

Whether the connection admission control comfiguration of current VSI is exist.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.2011.5.25.111.5.6.1.18

nqaVplsMTraceHistoryRcvQueryCount

The received query packet number for current IGMP version of current VSI.

nqaVplsMTraceHistoryRcvReportCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.6.1.19

The received report packet number for current IGMP version of current VSI.

nqaVplsMTraceHistoryRcvLeaveCount

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.6.1.20

The received leave packet number for current IGMP version of current VSI.

nqaVplsMTraceHistoryTimeStamp

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.6.1.21

The start time stamp of a probe.

nqaVplsMTraceHistoryCompletionTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.6.1.22

millisecondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.6.1.23

nqaVplsMTraceHistoryLastRC

The last implementation method specific reply code received.

nqaVplsMTraceHistoryLastRSC

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.6.1.24

The last implementation method specific reply sub code received.

nqaVplsMTraceHistoryFinishState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.6.1.25

The finish state of a probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	drop
4	busy
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.6.1.26

nqaVplsMTraceHistorySuccessPathNode

Whether the response router is on the path of a probe. The default value is notonPath(2).

Enumeration

Enumerated Values:

1	onPath
2	notonPath

.1.3.6.1.4.1.2011.5.25.111.5.6.1.27

nqaMacTraceHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.7 · 1 row entry · 14 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMacTraceHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMacTraceHistoryTable'

This object defines a list of historical MAC trace test instances for storing the running results of test instances.

nqaMacTraceHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.7.1

This object defines a table for storing the running results of test instances.
The number of entries in this table is limited by the value of nqaAdminParaHistoryRowMax.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMacTraceHistoryIndex nqaMacTraceHistoryReceiveOrder

Column Syntax OID

nqaMacTraceHistoryIndex

The object indicates the index of the MAC tract history table and the number of times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.7.1.1

nqaMacTraceHistoryReceiveOrder

This object indicates the sequence in which LTRs are received.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.7.1.2

nqaMacTraceHistoryTTL

This object indicates the TTL of the LTR.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.7.1.3

nqaMacTraceHistorySeqNumber

This object indicates the sequence number of the LTR.

nqaMacTraceHistoryCompletionTime

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.5.7.1.4

This object indicates the RTT (ms) of the response packet.

millisecondsSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.7.1.5

nqaMacTraceHistoryForwarded

This object indicates whether the device that sends LTRs continues to forward LTMs.

nqaMacTraceHistoryTerminalMep

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.7.1.6

This object indicates whether the LTR is sent by an MEP.

nqaMacTraceHistoryRelayAction

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.111.5.7.1.7

This object indicates the value of the Relay Action field in the LTR.

HUAWEI-ETHOAM-MIBHWDot1agCfmRelayActionFieldValue

Type Values:

1	rlyHit
2	rlyFdb
3	rlyMpdb
255	rlyInvalid

.1.3.6.1.4.1.2011.5.25.111.5.7.1.8

nqaMacTraceHistoryIngressAction

This object indicates the value of the Ingress Action field in the LTR.

HUAWEI-ETHOAM-MIBHWDot1agCfmIngressActionFieldValue

Type Values:

1	ingOk
2	ingDown
3	ingBlocked
4	ingVid
255	ingInvalid

.1.3.6.1.4.1.2011.5.25.111.5.7.1.9

nqaMacTraceHistoryIngressMac

This object indicates the physical MAC address carried in the ingress MAC address field in the LTR.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.5.7.1.10

nqaMacTraceHistoryIngressIfName

This object indicates the name of the inbound interface of the LTR.

OctetString

.1.3.6.1.4.1.2011.5.25.111.5.7.1.11

nqaMacTraceHistoryEgressAction

This object indicates the value of the Egress Action field in the LTR.

HUAWEI-ETHOAM-MIBHWDot1agCfmEgressActionFieldValue

Type Values:

1	egrOK
2	egrDown
3	egrBlocked
4	egrVid
255	egrInvalid

.1.3.6.1.4.1.2011.5.25.111.5.7.1.12

nqaMacTraceHistoryEgressMac

This object indicates the MAC address in the Egress MAC address field of the LTR.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.5.7.1.13

nqaMacTraceHistoryEgressIfName

This object indicates the name of the interface that forwards the LTR.

OctetString

.1.3.6.1.4.1.2011.5.25.111.5.7.1.14

nqaMultiPathHistoryTable

table

.1.3.6.1.4.1.2011.5.25.111.5.8 · 1 row entry · 10 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaMultiPathHistoryTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaMultiPathHistoryTable'

Defines the Remote Operations test History Table for
storing the results of a test operation.

nqaMultiPathHistoryEntry row .1.3.6.1.4.1.2011.5.25.111.5.8.1

Defines a table for storing the results of a test
operation. Entries in this table are limited by
the value of the corresponding nqaAdminParaHistoryRowMax.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaMultiPathHistoryIndex nqaMultiPathHistoryPathIndex nqaMultiPathHistoryHopIndex nqaMultiPathHistoryProbeIndex

Column Syntax OID

nqaMultiPathHistoryIndex

The history table index and times for dispatching dependency tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.8.1.1

nqaMultiPathHistoryPathIndex

The path index.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.2011.5.25.111.5.8.1.2

nqaMultiPathHistoryHopIndex

The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default value is 1.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.5.25.111.5.8.1.3

nqaMultiPathHistoryProbeIndex

The probe index of tests.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.2011.5.25.111.5.8.1.4

nqaMultiPathHistoryTimeStamp

The start time stamp of a probe.

nqaMultiPathHistoryAddressType

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.2011.5.25.111.5.8.1.5

The address type of history records.

nqaMultiPathHistoryAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.5.8.1.6

The destination address of tests. For Traceroute, it is the destination address of each hop.

nqaMultiPathHistoryCompletionTime

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.5.8.1.7

The amount of time from when a probe was sent to when its response was received or
when it timed out. The value of this object is reported
as 0 when it is not possible to transmit a probe.

nqaMultiPathHistoryFinishState

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.8.1.8

The result of a test operation made by a remote
host for a particular probe.

Enumeration

Enumerated Values:

1	success
2	timeout
3	drop
4	busy
5	overThreshold
6	disconnected
7	noConnected

.1.3.6.1.4.1.2011.5.25.111.5.8.1.9

nqaMultiPathHistoryLastRC

The last implementation method specific reply code received.

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaJitterCollectStatsIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.5.8.1.10

nqaJitterCollectStatsTable

table

.1.3.6.1.4.1.2011.5.25.111.8.1 · 1 row entry · 67 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaJitterCollectStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaJitterCollectStatsTable'

A table which contains the rolling accumulated history of the Jitter operation.

nqaJitterCollectStatsEntry row .1.3.6.1.4.1.2011.5.25.111.8.1.1

A table which contains the rolling accumulated history of the Jitter operation.
This entry is created only if the nqaAdminCtrlType is jitterAppl.

Indexes

Column	Syntax	OID
nqaJitterCollectStatsIndex The third index of jitter collection statistics table.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.1`
nqaJitterCollectStatsCompletions The number of the tests that have completed successfully.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.2`
nqaJitterCollectStatsRTDOverThresholds The number of tests that violate RTD (Round Trip Delay) threshold.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.3`
nqaJitterCollectStatsOWDOverThresholdsSD The number of tests that violate OWD (One Way Delay) threshold from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.4`
nqaJitterCollectStatsOWDOverThresholdsDS The number of tests that violate OWD (One Way Delay) threshold from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.5`
nqaJitterCollectStatsNumOfRTT The number of RTTs that are successfully measured by tests.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.6`
nqaJitterCollectStatsRTTSum The sum of RTTs that are successfully measured.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.7`
nqaJitterCollectStatsRTTSum2Low The sum of squares of RTTs that are successfully measured by tests (low order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.8`
nqaJitterCollectStatsRTTSum2High The sum of squares of RTTs that are successfully measured by tests (high order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.9`
nqaJitterCollectStatsRTTMin The minimum of RTTs that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.10`
nqaJitterCollectStatsRTTMax The maximum of RTTs that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.11`
nqaJitterCollectStatsMinOfPositivesSD The minimum of absolute value of all positive jitter values from source to destination.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.12`
nqaJitterCollectStatsMaxOfPositivesSD The maximum of absolute value of all positive jitter values from source to destination.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.13`
nqaJitterCollectStatsNumOfPositivesSD The number of all positive jitter values from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.14`
nqaJitterCollectStatsSumOfPositivesSD The sum of absolute value of all positive jitter values from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.15`
nqaJitterCollectStatsSum2OfPositivesSDLow The sum of squares of absolute value of all positive jitter values from source to destination (low order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.16`
nqaJitterCollectStatsSum2OfPositivesSDHigh The sum of squares of absolute value of all positive jitter values from source to destination (high order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.17`
nqaJitterCollectStatsMinOfNegativesSD The minimum of absolute value of all negative jitter values from source to destination.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.18`
nqaJitterCollectStatsMaxOfNegativesSD The maximum of absolute value of all negative jitter values from source to destination.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.19`
nqaJitterCollectStatsNumOfNegativesSD The number of all negative jitter values from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.20`
nqaJitterCollectStatsSumOfNegativesSD The sum of absolute value of all negative jitter values from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.21`
nqaJitterCollectStatsSum2OfNegativesSDLow The sum of squares of absolute value of all negative values from source to destination (low order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.22`
nqaJitterCollectStatsSum2OfNegativesSDHigh The sum of squares of absolute value of all negative values from source to destination (high order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.23`
nqaJitterCollectStatsMinOfPositivesDS The minimum of absolute value of all positive jitter values from destination to source.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.24`
nqaJitterCollectStatsMaxOfPositivesDS The maximum of absolute value of all positive jitter values from destination to source.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.25`
nqaJitterCollectStatsNumOfPositivesDS The number of all positive jitter values from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.26`
nqaJitterCollectStatsSumOfPositivesDS The sum of absolute value of all positive jitter values from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.27`
nqaJitterCollectStatsSum2OfPositivesDSLow The sum of squares of absolute value of all positive jitter values from destination to source (low order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.28`
nqaJitterCollectStatsSum2OfPositivesDSHigh The sum of squares of absolute value of all positive jitter values from destination to source (high order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.29`
nqaJitterCollectStatsMinOfNegativesDS The minimum of absolute value of all negative jitter values from destination to source.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.30`
nqaJitterCollectStatsMaxOfNegativesDS The maximum of absolute value of all negative jitter values from destination to source.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.31`
nqaJitterCollectStatsNumOfNegativesDS The number of all negative jitter values from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.32`
nqaJitterCollectStatsSumOfNegativesDS The sum of absolute value of all negative jitter values from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.33`
nqaJitterCollectStatsSum2OfNegativesDSLow The sum of squares of absolute value of all negative values from destination to source (low order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.34`
nqaJitterCollectStatsSum2OfNegativesDSHigh The sum of squares of absolute value of all negative values from destination to source (high order 32 bits).	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.35`
nqaJitterCollectStatsMaxDelaySD The maximum of all OWD (One Way Delay) from source to destination.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.36`
nqaJitterCollectStatsMaxDelayDS The maximum of all OWD (One Way Delay) from destination to source.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.37`
nqaJitterCollectStatsNumOfOWD The number of OWDs that were successfully measured by tests.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.38`
nqaJitterCollectStatsOWSumSD The sum of OWDs that were successfully measured by tests from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.39`
nqaJitterCollectStatsOWSumDS The sum of OWDs that were successfully measured by tests from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.40`
nqaJitterCollectStatsPacketLossSD The number of packets lost when sent from source to destination.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.41`
nqaJitterCollectStatsPacketLossDS The number of packets lost when sent from destination to source.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.42`
nqaJitterCollectStatsPacketLossUnknown The number of packets lost for which we cannot determine the direction.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.43`
nqaJitterCollectStatsPacketOutOfSequences The number of packets arrived out of sequence.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.44`
nqaJitterCollectStatsPacketLossRatio The ratio of the packets lost to all packets sent in the test.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.45`
nqaJitterCollectStatsErrors The number of errors occurred in the test.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.46`
nqaJitterCollectStatsBusies The number of occasions when a test couldn't be initialized because the previous test has not completed.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.47`
nqaJitterCollectStatsTimeouts The number of responses arrived over the time.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.48`
nqaJitterCollectStatsProbeResponses The number of responses from echo-server for the packets sent by the test.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.49`
nqaJitterCollectStatsSentProbes The number of packets sent in the test.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.50`
nqaJitterCollectStatsDrops The number of packets that were sent failed in the test.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.51`
nqaJitterCollectStatsRTTAvg The average of RTTs that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.52`
nqaJitterCollectStatsAvgJitter The average of jitter values that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.53`
nqaJitterCollectStatsAvgJitterSD The average of jitter values from source to destination that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.54`
nqaJitterCollectStatsAvgJitterDS The average of jitter values from destination to source that were successfully measured by tests.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.55`
nqaJitterCollectStatsJitterOut Jitter (RFC1889) at responder.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.56`
nqaJitterCollectStatsJitterIn Jitter (RFC1889) at sender.	OctetString	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.57`
nqaJitterCollectStatsMinDelaySD The minimum of all OWD (One Way Delay) from source to destination.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.58`
nqaJitterCollectStatsMinDelayDS The minimum of all OWD (One Way Delay) from destination to source.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.59`
nqaJitterCollectStatsAvgDelaySD The average of all OWD (One Way Delay) from source to destination.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.60`
nqaJitterCollectStatsAvgDelayDS The average of all OWD (One Way Delay) from destination to source.	millisecondsSNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.61`
nqaJitterCollectStatsPktRewriteNum The number of all the packets have been rewrited.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.62`
nqaJitterCollectStatsPktRewriteRatio The ratio of all the packets have been rewrited.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.63`
nqaJitterCollectStatsPktDisorderNum The number of all the packets have been disordered.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.64`
nqaJitterCollectStatsPktDisorderRatio The ratio of all the packets have been disordered.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.65`
nqaJitterCollectStatsFragPktDisorderNum The number of all the packets whose fragments have been disordered.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.66`
nqaJitterCollectStatsFragPktDisorderRatio The ratio of all the packets whose fragments have been disordered.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.111.8.1.1.67`

nqaAlarmTable

table

.1.3.6.1.4.1.2011.5.25.111.9.3 · 1 row entry · 11 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaAlarmTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaAlarmTable'

A list of alarm entries.

nqaAlarmEntry row .1.3.6.1.4.1.2011.5.25.111.9.3.1

A list of parameters that set up a periodic checking for alarm conditions.

Indexes

nqaAdminCtrlOwnerIndex nqaAdminCtrlTestName nqaAlarmIndex

Column Syntax OID

nqaAlarmIndex

Uniquely identifies a row in the nqaAlarmTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.9.3.1.1

nqaAlarmVariable

The type of the particular variable to be sampled.

Enumerationr/w

Enumerated Values:

1	rttAvg
2	lostPacketRatio
3	packetLossSd
4	packetLossDs
5	jitterRavg
6	jitterSdAvg
7	jitterDsAvg

.1.3.6.1.4.1.2011.5.25.111.9.3.1.11

nqaAlarmSampleType

delta(1): relative value
absolute(2): absolute value
Relative value: indicates the relative value to the last sampling.
Currently, only absolute(2) is supported.

Enumerationr/w

Enumerated Values:

1	delta
2	absolute

.1.3.6.1.4.1.2011.5.25.111.9.3.1.12

nqaAlarmValue

The actual value of the monitored object is compared with the upper limit and lower limit.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.9.3.1.13

nqaAlarmStartUpNqaAlarm

The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or r…

Enumerationr/w

Enumerated Values:

1	risingAlarm
2	fallingAlarm
3	risingOrFallingAlarm

.1.3.6.1.4.1.2011.5.25.111.9.3.1.14

nqaAlarmRisingThreshold

Set the upper limit of the alarm.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.9.3.1.15

nqaAlarmFallingThreshold

Set the lower limit of the alarm.

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.5.25.111.9.3.1.16

nqaAlarmRisingEventIndex

Index of the event triggered when the node value exceeds the upper limit.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.9.3.1.17

nqaAlarmFallingEventIndex

Index of the event triggered when the node value is under the lower limit.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.9.3.1.18

nqaAlarmDescription

Alarm Description.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.5.25.111.9.3.1.19

nqaAlarmStatus

The status of the alarm row.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.9.3.1.51

nqaEventTable

table

.1.3.6.1.4.1.2011.5.25.111.9.4 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaEventTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaEventTable'

A list of events to be generated.

nqaEventEntry row .1.3.6.1.4.1.2011.5.25.111.9.4.1

A set of parameters that describe an event to be generated when certain conditions are met.

Indexes

nqaEventIndex

Column Syntax OID

nqaEventIndex

Uniquely identifies a row in the nqaEventTable.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.9.4.1.1

nqaEventType

Event type, that is, behaviors for processing events:
none(1): no behavior
log(2): keeping logs
trap(3): sending trap messages
logandtrap(4): keeping logs and sending trap messages
linkage(5): start the linkaged test-in…

Enumerationr/w

Enumerated Values:

1	none
2	log
3	trap
4	logAndTrap
5	linkage

.1.3.6.1.4.1.2011.5.25.111.9.4.1.11

nqaEventDescription

Event description.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.5.25.111.9.4.1.12

nqaEventAdminName

Administrator name of event test instance.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.9.4.1.13

nqaEventOperationTag

Operation tag of event test instance.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.5.25.111.9.4.1.14

nqaEventStatus

The status of the event row.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.9.4.1.51

nqaReflectorTable

table

.1.3.6.1.4.1.2011.5.25.111.11.1 · 1 row entry · 22 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaReflectorTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaReflectorTable'

Description: nqaReflectorTable describes how to configure an NQA reflector.
Creation restrictions: None
Modification restrictions: This table is generated after a reflector is created. The entries in this table can be modified when nqaReflectorID is specified.
The reflector cannot be modified after being created.
Deletion restrictions: None
Access restrictions: None

nqaReflectorEntry row .1.3.6.1.4.1.2011.5.25.111.11.1.1

Defines an entry in the nqaReflectorTable.

Indexes

nqaReflectorID

Column Syntax OID

nqaReflectorID

This object indicates the reflector ID, which is also the index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.1

nqaReflectorIfIndex

This object indicates the index of the reflector interface.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.2

nqaReflectorMacAddress

This object indicates the MAC address.

nqaReflectorIPAddressType

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.11.1.1.3

This object indicates the type of an IP address.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.11.1.1.4

nqaReflectorIPAddress

This object indicates the IP address.

nqaReflectorSimulationIPAddressType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.11.1.1.5

This object indicates the type of an simulated IP address.

nqaReflectorSimulationIPAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.11.1.1.6

This object indicates the simulated IP address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.11.1.1.7

nqaReflectorPevid

This object indicates the PE VLAN ID.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.8

nqaReflectorCevid

This object indicates the CE VLAN ID.

nqaReflectorDestinationPort

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.9

nqaReflectorAgeTime

This object indicates the aging time, in seconds.
Setting the value to 0 indicates reserving the reflector eternally.

secondsSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.10

nqaReflectorSourcePort

This object indicates the UDP source port number. 0 means invalid UDP source port, it cannot be set but could be walked

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.25.111.11.1.1.11

This object indicates the UDP destination port number. 0 means invalid UDP source port, it cannot be set but could be walked

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.25.111.11.1.1.12

nqaReflectorState

This object indicates the status of the reflector.
1: active
2: not in service

Enumeration

Enumerated Values:

0	unknown
1	active
2	notinservice

.1.3.6.1.4.1.2011.5.25.111.11.1.1.13

nqaReflectorSurvivalTime

This object indicates the survival time of the reflector, in seconds.

nqaReflectorRecommendedTestMacAddress

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.14

This object indicates the recommended test MAC address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.11.1.1.15

nqaReflectorTestBehavior

This object indicates the action performed on the non-test frames by the reflector.
0: default value for 2544 reflector.
1: sharemode for 2544 reflector.
2: exclusive mode for Y.1564 reflector.
3: test flow mode for Y.…

Unsigned32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.2011.5.25.111.11.1.1.16

nqaReflectorDiscardPriority

This object is used to configure the priority of Ethernet packets for reflector in the Ethernet service scenario.
The default is 4294967295.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.11.1.1.17

nqaReflectorDirection

Specifies the reflect direction.
1 indicates inbound. Reflect packets in manner of simulate product forwarding.
2 indicates outbound. Reflect packets in manner of output.

Unsigned32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.2011.5.25.111.11.1.1.18

nqaReflectorEndTime

This object indicates the end time of the reflector, in seconds.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.5.25.111.11.1.1.19

nqaReflectorExchangePort

This object indicates whether exchange port.
0: disable
1: enable

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.5.25.111.11.1.1.20

nqaReflectorTestFlowId

This object indicates the ID of test flow.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.5.25.111.11.1.1.21

nqaReflectorRowStatus

This object indicates the status of a row, which can be created or deleted but not modified.
The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.11.1.1.50

nqaTestFlowTable

table

.1.3.6.1.4.1.2011.5.25.111.12.1 · 1 row entry · 49 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk nqaTestFlowTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NQA-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NQA-MIB::nqaTestFlowTable'

A table of NQA testflow definitions.

nqaTestFlowEntry row .1.3.6.1.4.1.2011.5.25.111.12.1.1

Defines an entry in the nqaTestFlowTable.

Indexes

nqaTestFlowId

Column Syntax OID

nqaTestFlowId

This object indicates the testflow ID, which is also the index of this table.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.1

nqaTestFlowBeginDstMAC

This object indicates the beginning of destination MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.2

nqaTestFlowEndDstMAC

This object indicates the end of destination MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.3

nqaTestFlowBeginSrcMAC

This object indicates the beginning of source MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.4

nqaTestFlowEndSrcMAC

This object indicates the end of source MAC address.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.5

nqaTestFlowDstIPAddrType

This object indicates the type of destination IP address.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.12.1.1.6

nqaTestFlowBeginDstIP

This object indicates the beginning of destination IP address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.12.1.1.7

nqaTestFlowEndDstIP

This object indicates the end of destination IP address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.12.1.1.8

nqaTestFlowSrcIPAddrType

This object indicates the type of source IP address.

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.2011.5.25.111.12.1.1.9

nqaTestFlowBeginSrcIP

This object indicates the beginning of source IP address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.12.1.1.10

nqaTestFlowEndSrcIP

This object indicates the end of source IP address.

Type Constraints:
range: 0..255

.1.3.6.1.4.1.2011.5.25.111.12.1.1.11

nqaTestFlowPevid

This object indicates the PE VLAN ID.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.12

nqaTestFlowBeginCevid

This object indicates the beginning of CE VLAN ID.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.13

nqaTestFlowEndCevid

This object indicates the end of CE VLAN ID.

nqaTestFlowBeginUdpDstPort

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.14

This object indicates the beginning of UDP destination port.
The default value is 7.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.12.1.1.15

nqaTestFlowEndUdpDstPort

This object indicates the end of UDP destination port.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.12.1.1.16

nqaTestFlowBeginUdpSrcPort

This object indicates the beginning of UDP source port.
The default value is 49184.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.12.1.1.17

nqaTestFlowEndUdpSrcPort

This object indicates the end of UDP source port.

Unsigned32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.2011.5.25.111.12.1.1.18

nqaTestFlowCir

This object indicates value of Committed Information Rate.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.19

nqaTestFlowEir

This object indicates value of Excess Information Rate.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.20

nqaTestFlowFlr

This object indicates value of Frame Loss Rate.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.21

nqaTestFlowFtd

This object indicates value of Frame Transfer Delay.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.22

nqaTestFlowFdv

This object indicates value of Frame Delay Variation.

nqaTestFlowTrafficPolicing

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.23

nqaTestFlowCirSimpleTest

When set to 'enable (1)', cir simple test is enabled.The default is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.5.25.111.12.1.1.24

When set to 'enable (1)', traffic policing is enabled.The default is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.2011.5.25.111.12.1.1.25

nqaTestFlowDescription

This object indicates the description information for testflow.

OctetStringr/w

Constraints:
range: 0-127

.1.3.6.1.4.1.2011.5.25.111.12.1.1.26

nqaTestFlowColorMode

This object indicates the color mode for testflow, the default value is colorblind(0).

Enumerationr/w

Enumerated Values:

0	colorblind
1	colorware

.1.3.6.1.4.1.2011.5.25.111.12.1.1.27

nqaTestFlowPriorityType

This object indicates the priority type of color mode.

Enumerationr/w

Enumerated Values:

0	unknown
1	eth8021p
2	dscp

.1.3.6.1.4.1.2011.5.25.111.12.1.1.28

nqaTestFlowGreenBeginValue

This object indicates the beginning of priority value of Green.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.29

nqaTestFlowGreenEndValue

This object indicates the end of priority value of Green.

nqaTestFlowYellowBeginValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.30

This object indicates the beginning of priority value of Yellow.

nqaTestFlowYellowEndValue

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.31

This object indicates the end of priority value of Yellow.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.2011.5.25.111.12.1.1.32

nqaTestFlowRowStatus

This object indicates the status of a row, which can be created or deleted but not modified.
The value can be set to 'CreateAndGo (4)' and 'Destroy (6)'.

nqaTestFlowDstMacModifierType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.33

This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0).
An increment specifies the rules for mathematically creating a range of values.

Enumerationr/w

Enumerated Values:

0	singleORrange
1	increment

.1.3.6.1.4.1.2011.5.25.111.12.1.1.34

nqaTestFlowDstMacModifierMask

This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0.

nqaTestFlowDstMacModifierCount

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.35

This object indicates the number of MAC address modifier values. The invalid value is 0.

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.5.25.111.12.1.1.36

nqaTestFlowDstMacModifierStep

This object indicates MAC address modifier step. The invalid value is 0.

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.5.25.111.12.1.1.37

nqaTestFlowSrcMacModifierType

This object indicates the MAC address modifier type of a testflow. The default value is singleORrange(0).
An increment specifies the rules for mathematically creating a range of values.

Enumerationr/w

Enumerated Values:

0	singleORrange
1	increment

.1.3.6.1.4.1.2011.5.25.111.12.1.1.38

nqaTestFlowSrcMacModifierMask

This object specifies the MAC address modifier bits of value that applied to add the step value. The invalid value is 0-0-0.

nqaTestFlowSrcMacModifierCount

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.111.12.1.1.39

This object indicates the number of MAC address modifier values. The invalid value is 0.

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.5.25.111.12.1.1.40

nqaTestFlowSrcMacModifierStep

This object indicates MAC address modifier step. The invalid value is 0.

Unsigned32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.2011.5.25.111.12.1.1.41

nqaTestFlowDstIPModifierType

This object indicates the IP address modifier type of a testflow. The default value is singleORrange(0).
An increment specifies the rules for mathematically creating a range of values.

Enumerationr/w

Enumerated Values:

0	singleORrange
1	increment

.1.3.6.1.4.1.2011.5.25.111.12.1.1.42

nqaTestFlowDstIPModifierMask

This object specifies the IP address modifier bits of value that applied to add the step value.