NETGEAR-RADLAN-OSPFV3-LSDB-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
109

rlOspfv3RouterLsaTable

table
.1.3.6.1.4.1.4526.17.222.1 · 1 row entry · 20 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3RouterLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3RouterLsaTable' 
Router Link State Advertisement.
rlOspfv3RouterLsaEntry row .1.3.6.1.4.1.4526.17.222.1.1
A single entry from Router LSA.
Indexes
Column Syntax OID
rlOspfv3RouterLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.1.1.1
rlOspfv3RouterLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.1.1.2
rlOspfv3RouterLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.1.1.3
rlOspfv3RouterLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.1.1.4
rlOspfv3RouterLsaIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.1.1.5
rlOspfv3RouterLsaCount
Number of entries containg is the LSA.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.1.1.6
rlOspfv3RouterLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.1.1.7
rlOspfv3RouterLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.1.1.8
rlOspfv3RouterLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.1.1.9
rlOspfv3RouterLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.1.1.10
rlOspfv3RouterLsaBitW
When set, the router is a wild-card multicast receiver.
When running MOSPF, these routers receive all multicast datagrams,
regardless of destination.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.1.1.11
rlOspfv3RouterLsaBitV
When set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.1.1.12
rlOspfv3RouterLsaBitE
When set, the router is an AS
boundary router (E is for external).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.1.1.13
rlOspfv3RouterLsaBitB
When set, the router is an area
border router (B is for border).
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.1.1.14
rlOspfv3RouterLsaOptions
The optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.1.1.15
rlOspfv3RouterLsaType
A quick description of the router link.
Enumeration
Enumerated Values:
1pointToPoint
2transitNetwork
3stubNetwork
4virtualLink
 .1.3.6.1.4.1.4526.17.222.1.1.16
rlOspfv3RouterLsaMetric
The cost of using this router link.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.1.1.17
rlOspfv3RouterLsaInterfaceID
The Interface ID assigned to the interface being described.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.1.1.18
rlOspfv3RouterLsaNeighborInterfaceID
The Interface ID the neighbor router (or the attached link's
Designated Router, for Type 2 interfaces) has been advertising
in hello packets sent on the attached link.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.1.1.19
rlOspfv3RouterLsaNeighborRouterID
The Router ID the neighbor router (or the attached link's
Designated Router, for Type 2 interfaces).
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.1.1.20

rlOspfv3NetworkLsaTable

table
.1.3.6.1.4.1.4526.17.222.2 · 1 row entry · 12 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3NetworkLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3NetworkLsaTable' 
Network Link State Advertisement.
rlOspfv3NetworkLsaEntry row .1.3.6.1.4.1.4526.17.222.2.1
A single entry from Network LSA.
Indexes
Column Syntax OID
rlOspfv3NetworkLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.2.1.1
rlOspfv3NetworkLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.2.1.2
rlOspfv3NetworkLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.2.1.3
rlOspfv3NetworkLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.2.1.4
rlOspfv3NetworkLsaIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.2.1.5
rlOspfv3NetworkLsaCount
Number of entries containg is the LSA.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.2.1.6
rlOspfv3NetworkLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.2.1.7
rlOspfv3NetworkLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.2.1.8
rlOspfv3NetworkLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.2.1.9
rlOspfv3NetworkLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.2.1.10
rlOspfv3NetworkLsaOptions
The optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.2.1.11
rlOspfv3NetworkLsaAttRouter
The Router IDs of each of the routers attached
to the link.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.2.1.12

rlOspfv3InterAreaPrefixLsaTable

table
.1.3.6.1.4.1.4526.17.222.3 · 1 row entry · 12 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3InterAreaPrefixLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3InterAreaPrefixLsaTable' 
Inter Area Prefix Link State Advertisement.
rlOspfv3InterAreaPrefixLsaEntry row .1.3.6.1.4.1.4526.17.222.3.1
A single entry from Network LSA.
Indexes
Column Syntax OID
rlOspfv3InterAreaPrefixLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.3.1.1
rlOspfv3InterAreaPrefixLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.3.1.2
rlOspfv3InterAreaPrefixLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.3.1.3
rlOspfv3InterAreaPrefixLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.3.1.4
rlOspfv3InterAreaPrefixLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.3.1.5
rlOspfv3InterAreaPrefixLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.3.1.6
rlOspfv3InterAreaPrefixLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.3.1.7
rlOspfv3InterAreaPrefixLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.3.1.8
rlOspfv3InterAreaPrefixLsaMetric
The cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.3.1.9
rlOspfv3InterAreaPrefixLsaPrefixLength
IPv6 address prefix length.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.3.1.10
rlOspfv3InterAreaPrefixLsaPrefixOptions
IPv6 address prefix options.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.3.1.11
rlOspfv3InterAreaPrefixLsaAddressPrefix
IPv6 address prefix - bit strings of length 128.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.3.1.12

rlOspfv3InterAreaRouterLsaTable

table
.1.3.6.1.4.1.4526.17.222.4 · 1 row entry · 11 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3InterAreaRouterLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3InterAreaRouterLsaTable' 
Inter Area Router Link State Advertisement.
rlOspfv3InterAreaRouterLsaEntry row .1.3.6.1.4.1.4526.17.222.4.1
A single entry from Network LSA.
Indexes
Column Syntax OID
rlOspfv3InterAreaRouterLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.4.1.1
rlOspfv3InterAreaRouterLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.4.1.2
rlOspfv3InterAreaRouterLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.4.1.3
rlOspfv3InterAreaRouterLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.4.1.4
rlOspfv3InterAreaRouterLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.4.1.5
rlOspfv3InterAreaRouterLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.4.1.6
rlOspfv3InterAreaRouterLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.4.1.7
rlOspfv3InterAreaRouterLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.4.1.8
rlOspfv3InterAreaRouterLsaOptions
The optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.4.1.9
rlOspfv3InterAreaRouterLsaMetric
The cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.4.1.10
rlOspfv3InterAreaRouterLsaDestinationRouterId
The Router ID of the router being described by the LSA.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.4.1.11

rlOspfv3AsExternalLsaTable

table
.1.3.6.1.4.1.4526.17.222.5 · 1 row entry · 19 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3AsExternalLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3AsExternalLsaTable' 
AS External Link State Advertisement.
rlOspfv3AsExternalLsaEntry row .1.3.6.1.4.1.4526.17.222.5.1
A single entry from Router LSA.
Indexes
Column Syntax OID
rlOspfv3AsExternalLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.5.1.1
rlOspfv3AsExternalLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.5.1.2
rlOspfv3AsExternalLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.5.1.3
rlOspfv3AsExternalLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.5.1.4
rlOspfv3AsExternalLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.5.1.5
rlOspfv3AsExternalLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.5.1.6
rlOspfv3AsExternalLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.5.1.7
rlOspfv3AsExternalLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.8
rlOspfv3AsExternalLsaBitE
The type of external metric. If bit E is set, the metric
specified is a Type 2 external metric.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.5.1.9
rlOspfv3AsExternalLsaBitF
If set, a Forwarding Address has been included in the LSA.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.5.1.10
rlOspfv3AsExternalLsaBitT
If set, an External Route Tag has been included in the LSA.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.4526.17.222.5.1.11
rlOspfv3AsExternalLsaMetric
The cost of this route. Interpretation depends on the external
type indication (bit E above).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.12
rlOspfv3AsExternalLsaReferencedLsType
If non-zero, an LSA with this LS type is to be associated with
this LSA (see Referenced Link State ID below).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.13
rlOspfv3AsExternalLsaPrefixLength
IPv6 address prefix length.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.14
rlOspfv3AsExternalLsaPrefixOptions
IPv6 address prefix options.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.15
rlOspfv3AsExternalLsaAddressPrefix
IPv6 address prefix - bit strings of length 128.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.5.1.16
rlOspfv3AsExternalLsaForwardingAddress
A fully qualified IPv6 address (128 bits).
Included in the LSA if and only if bit F has been set.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.5.1.17
rlOspfv3AsExternalLsaExternalRouteTag
A 32-bit field which may be used to communicate additional
information between AS boundary routers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.18
rlOspfv3AsExternalLsaReferencedLinkStateId
Included if and only if Reference LS Type is non-zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.5.1.19

rlOspfv3LinkLsaTable

table
.1.3.6.1.4.1.4526.17.222.6 · 1 row entry · 17 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3LinkLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3LinkLsaTable' 
Link (Type 8) Link State Advertisement.
rlOspfv3LinkLsaEntry row .1.3.6.1.4.1.4526.17.222.6.1
A single entry from Network LSA.
Indexes
Column Syntax OID
rlOspfv3LinkLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.6.1.1
rlOspfv3LinkLsaIfIndex
The identifier of the link from which the LSA
was received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.2
rlOspfv3LinkLsaIfInstId
OSPFv3 protocol instance ID specified in the OSPF header
of the packet in which this LSA was received.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.4526.17.222.6.1.3
rlOspfv3LinkLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.6.1.4
rlOspfv3LinkLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.6.1.5
rlOspfv3LinkLsaIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.6.1.6
rlOspfv3LinkLsaCount
Number of entries containg is the LSA.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.6.1.7
rlOspfv3LinkLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.6.1.8
rlOspfv3LinkLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.6.1.9
rlOspfv3LinkLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.6.1.10
rlOspfv3LinkLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.11
rlOspfv3LinkLsaRtrPri
The Router Priority of the interface attaching the originating
router to the link.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.12
rlOspfv3LinkLsaOptions
The optional capabilities supported by the router.
Through this mechanism routers of differing capabilities can be
mixed within an OSPF routing domain.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.13
rlOspfv3LinkLsaLinkLocalInterfaceAddress
Link Local Interface Address.
The originating router's link-local interface address on the link.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.6.1.14
rlOspfv3LinkLsaPrefixLength
IPv6 address prefix length.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.15
rlOspfv3LinkLsaPrefixOptions
IPv6 address prefix options.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.6.1.16
rlOspfv3LinkLsaAddressPrefix
IPv6 address prefix - bit strings of length 128.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.6.1.17

rlOspfv3IntraAreaPrefixLsaTable

table
.1.3.6.1.4.1.4526.17.222.7 · 1 row entry · 18 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk rlOspfv3IntraAreaPrefixLsaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NETGEAR-RADLAN-OSPFV3-LSDB-MIB::rlOspfv3IntraAreaPrefixLsaTable' 
Intra Area Prefix Link State Advertisement.
rlOspfv3IntraAreaPrefixLsaEntry row .1.3.6.1.4.1.4526.17.222.7.1
A single entry from Network LSA.
Indexes
Column Syntax OID
rlOspfv3IntraAreaPrefixLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID
Description:
An OSPF Process Identifier.
 .1.3.6.1.4.1.4526.17.222.7.1.1
rlOspfv3IntraAreaPrefixLsaAreaId
The 32 bit identifier of the Area from which
the LSA was received.
OSPF-MIBAreaID .1.3.6.1.4.1.4526.17.222.7.1.2
rlOspfv3IntraAreaPrefixLsaLsid
The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.17.222.7.1.3
rlOspfv3IntraAreaPrefixLsaRouterId
The 32 bit number that uniquely identifies the
originating router in the Autonomous System.
OSPF-MIBRouterID .1.3.6.1.4.1.4526.17.222.7.1.4
rlOspfv3IntraAreaPrefixLsaIdx
The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.7.1.5
rlOspfv3IntraAreaPrefixLsaCount
Number of entries containg is the LSA.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4526.17.222.7.1.6
rlOspfv3IntraAreaPrefixLsaSequence
The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The larger the
sequence number the more recent …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.7.1.7
rlOspfv3IntraAreaPrefixLsaAge
This field is the age of the link state
advertisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.7.1.8
rlOspfv3IntraAreaPrefixLsaChecksum
This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented without updating the checksum.
The checksum …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.17.222.7.1.9
rlOspfv3IntraAreaPrefixLsaLength
The lenth in bytes of the LSA.
This includes the 20 byte LSA header.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.10
rlOspfv3IntraAreaPrefixLsaNumPrefixes
Number of IPv6 address prefixes contained in the LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.11
rlOspfv3IntraAreaPrefixLsaReferenceLsType
Referenced LS Type:
If the Referenced LS type is 1, the prefixes are associated with a router-LSA.
If Referenced LS type is 2, the prefixes are associated with a network-LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.12
rlOspfv3IntraAreaPrefixLsaReferenceLsId
Referenced Link State ID:
If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0.
If the prefixes are associated with a network-LSA, the Referenced Link State ID should be
the Interfa…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.13
rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter
Referenced Advertising Router: If the prefixes are associated with a router-LSA,
the Referenced Advertising Router should be the originating router's Router ID.
If the prefixes are associated with a network-LSA,
Referen…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.14
rlOspfv3IntraAreaPrefixLsaMetric
The cost of this route. Expressed in the same units as the
interface costs in the router-LSAs.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.15
rlOspfv3IntraAreaPrefixLsaPrefixLength
IPv6 address prefix length.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.16
rlOspfv3IntraAreaPrefixLsaPrefixOptions
IPv6 address prefix options.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.17.222.7.1.17
rlOspfv3IntraAreaPrefixLsaAddressPrefix
IPv6 address prefix - bit strings of length 128.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4526.17.222.7.1.18