rlOspfv3RouterLsaBitV

NETGEAR-RADLAN-OSPFV3-LSDB-MIB · .1.3.6.1.4.1.4526.17.222.1.1.12
MIB view Table view

Object

column Enumeration 
When set, the router is an endpoint
of one or more fully adjacent virtual
links having the described area as Transit
area (V is for virtual link endpoint).

Context

MIB
NETGEAR-RADLAN-OSPFV3-LSDB-MIB
OID
.1.3.6.1.4.1.4526.17.222.1.1.12
Type
column
Access
readonly
Status
current
Parent
rlOspfv3RouterLsaEntry
Table
rlOspfv3RouterLsaTable
Siblings
19

Syntax

Enumeration

Values & Constraints

Enumerated Values
1off
2on

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rlOspfv3RouterLsaProcessId
A 32-bit integer uniquely identifying an OSPFv3 process.
columnNETGEAR-RADLAN-OSPF-MIBRlOspfProcessID.1.3.6.1.4.1.4526.17.222.1.1.1
rlOspfv3RouterLsaLength
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.10
rlOspfv3RouterLsaBitW
When set, the router is a wild-card multicast receiver. When running MOSPF, these routers receive all multicast datagrams, regardless of destination.
columnEnumeration.1.3.6.1.4.1.4526.17.222.1.1.11
rlOspfv3RouterLsaBitE
When set, the router is an AS boundary router (E is for external).
columnEnumeration.1.3.6.1.4.1.4526.17.222.1.1.13
rlOspfv3RouterLsaBitB
When set, the router is an area border router (B is for border).
columnEnumeration.1.3.6.1.4.1.4526.17.222.1.1.14
rlOspfv3RouterLsaOptions
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.15
rlOspfv3RouterLsaType
A quick description of the router link.
columnEnumeration.1.3.6.1.4.1.4526.17.222.1.1.16
rlOspfv3RouterLsaMetric
The cost of using this router link.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.17
rlOspfv3RouterLsaInterfaceID
The Interface ID assigned to the interface being described.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.18
rlOspfv3RouterLsaNeighborInterfaceID
The Interface ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces) has been advertising in hello packets sent on the attached link.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.19
rlOspfv3RouterLsaAreaId
The 32 bit identifier of the Area from which the LSA was received.
columnOSPF-MIBAreaID.1.3.6.1.4.1.4526.17.222.1.1.2
rlOspfv3RouterLsaNeighborRouterID
The Router ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces).
columnOSPF-MIBRouterID.1.3.6.1.4.1.4526.17.222.1.1.20
rlOspfv3RouterLsaLsid
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the adver…
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.4526.17.222.1.1.3
rlOspfv3RouterLsaRouterId
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
columnOSPF-MIBRouterID.1.3.6.1.4.1.4526.17.222.1.1.4
rlOspfv3RouterLsaIdx
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
columnUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.5
rlOspfv3RouterLsaCount
Number of entries containg is the LSA.
columnUnsigned32.1.3.6.1.4.1.4526.17.222.1.1.6
rlOspfv3RouterLsaSequence
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The lar…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.17.222.1.1.7
rlOspfv3RouterLsaAge
This field is the age of the link state advertisement in seconds.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.17.222.1.1.8
rlOspfv3RouterLsaChecksum
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented with…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4526.17.222.1.1.9