rlOspfv3IntraAreaPrefixLsaAddressPrefix
NETGEAR-RADLAN-OSPFV3-LSDB-MIB ·
.1.3.6.1.4.1.4526.17.222.7.1.18
Object
column
INET-ADDRESS-MIBInetAddress
IPv6 address prefix - bit strings of length 128.
Context
- MIB
- NETGEAR-RADLAN-OSPFV3-LSDB-MIB
- OID
.1.3.6.1.4.1.4526.17.222.7.1.18- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlOspfv3IntraAreaPrefixLsaEntry
- Table
- rlOspfv3IntraAreaPrefixLsaTable
- Siblings
- 17
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlOspfv3IntraAreaPrefixLsaProcessId A 32-bit integer uniquely identifying an OSPFv3 process. | column | NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID | .1.3.6.1.4.1.4526.17.222.7.1.1 |
| rlOspfv3IntraAreaPrefixLsaLength The lenth in bytes of the LSA.
This includes the 20 byte LSA header. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.10 |
| rlOspfv3IntraAreaPrefixLsaNumPrefixes Number of IPv6 address prefixes contained in the LSA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.11 |
| rlOspfv3IntraAreaPrefixLsaReferenceLsType Referenced LS Type:
If the Referenced LS type is 1, the prefixes are associated with a router-LSA.
If Referenced LS type is 2, the prefixes are associated with a network-LSA. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.12 |
| rlOspfv3IntraAreaPrefixLsaReferenceLsId Referenced Link State ID:
If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0.
If the prefixes are associated with a network-LSA, the Refere… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.13 |
| rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter Referenced Advertising Router: If the prefixes are associated with a router-LSA,
the Referenced Advertising Router should be the originating router's Router ID.
If the prefixes ar… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.14 |
| rlOspfv3IntraAreaPrefixLsaMetric The cost of this route. Expressed in the same units as the
interface costs in the router-LSAs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.15 |
| rlOspfv3IntraAreaPrefixLsaPrefixLength IPv6 address prefix length. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.16 |
| rlOspfv3IntraAreaPrefixLsaPrefixOptions IPv6 address prefix options. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.17 |
| rlOspfv3IntraAreaPrefixLsaAreaId The 32 bit identifier of the Area from which
the LSA was received. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.4526.17.222.7.1.2 |
| rlOspfv3IntraAreaPrefixLsaLsid The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the adver… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.17.222.7.1.3 |
| rlOspfv3IntraAreaPrefixLsaRouterId The 32 bit number that uniquely identifies the
originating router in the Autonomous System. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.4526.17.222.7.1.4 |
| rlOspfv3IntraAreaPrefixLsaIdx The index is a unsigned 32-bit integer.
It is used as sequence number of entry
in the LSA and relevant only for Router
or Network LSA which can contain
unlimited number of entries. | column | Unsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.5 |
| rlOspfv3IntraAreaPrefixLsaCount Number of entries containg is the LSA. | column | Unsigned32 | .1.3.6.1.4.1.4526.17.222.7.1.6 |
| rlOspfv3IntraAreaPrefixLsaSequence The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The lar… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.7.1.7 |
| rlOspfv3IntraAreaPrefixLsaAge This field is the age of the link state
advertisement in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.7.1.8 |
| rlOspfv3IntraAreaPrefixLsaChecksum This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented with… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.7.1.9 |