rlOspfv3AsExternalLsaBitF
NETGEAR-RADLAN-OSPFV3-LSDB-MIB ·
.1.3.6.1.4.1.4526.17.222.5.1.10
Object
column
Enumeration
If set, a Forwarding Address has been included in the LSA.
Context
- MIB
- NETGEAR-RADLAN-OSPFV3-LSDB-MIB
- OID
.1.3.6.1.4.1.4526.17.222.5.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlOspfv3AsExternalLsaEntry
- Table
- rlOspfv3AsExternalLsaTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | off |
2 | on |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlOspfv3AsExternalLsaProcessId A 32-bit integer uniquely identifying an OSPFv3 process. | column | NETGEAR-RADLAN-OSPF-MIBRlOspfProcessID | .1.3.6.1.4.1.4526.17.222.5.1.1 |
| rlOspfv3AsExternalLsaBitT If set, an External Route Tag has been included in the LSA. | column | Enumeration | .1.3.6.1.4.1.4526.17.222.5.1.11 |
| rlOspfv3AsExternalLsaMetric The cost of this route. Interpretation depends on the external
type indication (bit E above). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.12 |
| rlOspfv3AsExternalLsaReferencedLsType If non-zero, an LSA with this LS type is to be associated with
this LSA (see Referenced Link State ID below). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.13 |
| rlOspfv3AsExternalLsaPrefixLength IPv6 address prefix length. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.14 |
| rlOspfv3AsExternalLsaPrefixOptions IPv6 address prefix options. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.15 |
| rlOspfv3AsExternalLsaAddressPrefix IPv6 address prefix - bit strings of length 128. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4526.17.222.5.1.16 |
| rlOspfv3AsExternalLsaForwardingAddress A fully qualified IPv6 address (128 bits).
Included in the LSA if and only if bit F has been set. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4526.17.222.5.1.17 |
| rlOspfv3AsExternalLsaExternalRouteTag A 32-bit field which may be used to communicate additional
information between AS boundary routers. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.18 |
| rlOspfv3AsExternalLsaReferencedLinkStateId Included if and only if Reference LS Type is non-zero. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.19 |
| rlOspfv3AsExternalLsaAreaId The 32 bit identifier of the Area from which
the LSA was received. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.4526.17.222.5.1.2 |
| rlOspfv3AsExternalLsaLsid The Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the adver… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.4526.17.222.5.1.3 |
| rlOspfv3AsExternalLsaRouterId The 32 bit number that uniquely identifies the
originating router in the Autonomous System. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.4526.17.222.5.1.4 |
| rlOspfv3AsExternalLsaSequence The sequence number field is a signed 32-bit
integer. It is used to detect old and duplicate
link state advertisements. The space of sequence
numbers is linearly ordered. The lar… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.5.1.5 |
| rlOspfv3AsExternalLsaAge This field is the age of the link state
advertisement in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.5.1.6 |
| rlOspfv3AsExternalLsaChecksum This field is the checksum of the complete contents
of the advertisement, excepting the age field.
The age field is excepted so that an advertisement's
age can be incremented with… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4526.17.222.5.1.7 |
| rlOspfv3AsExternalLsaLength The lenth in bytes of the LSA.
This includes the 20 byte LSA header. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4526.17.222.5.1.8 |
| rlOspfv3AsExternalLsaBitE The type of external metric. If bit E is set, the metric
specified is a Type 2 external metric. | column | Enumeration | .1.3.6.1.4.1.4526.17.222.5.1.9 |