MPLS-LDP-ATM-STD-MIB Table View

This table contains ATM specific information
which could be used in the
'Optional Parameters' and other ATM specific
information.
          
This table 'sparse augments' the mplsLdpEntityTable
when ATM is the Layer 2 medium.

mplsLdpEntityAtmEntry row .1.3.6.1.2.1.10.166.5.1.1.1.1

An entry in this table represents the ATM parameters
and ATM information for this LDP entity.

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex

Column	Syntax	OID
mplsLdpEntityAtmIfIndexOrZero This value represents either the InterfaceIndex or 0 (zero). The value of zero means that the InterfaceIndex is not known. However, if the InterfaceIndex is known, then it must be represented by this val…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.10.166.5.1.1.1.1.1
mplsLdpEntityAtmMergeCap Denotes the Merge Capability of this Entity. This is the EXACT value for the ATM Session Parameter, field M (for ATM Merge Capabilities). The ATM Session Parameter is an optional parameter in the Initialization Message.…	Enumerationr/w Enumerated Values: 0 notSupported 1 vpMerge 2 vcMerge 3 vpAndVcMerge	.1.3.6.1.2.1.10.166.5.1.1.1.1.2
mplsLdpEntityAtmLRComponents Number of Label Range Components in the Initialization message. This also represents the number of entries in the mplsLdpEntityAtmLRTable which correspond to this entry. This is the EXACT value for the A…	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.166.5.1.1.1.1.3
mplsLdpEntityAtmVcDirectionality If the value of this object is 'bidirectional(0)', a given VCI, within a given VPI, is used as a label for both directions independently. If the value of this object is 'unidirectional(1)', a given VCI wi…	Enumerationr/w Enumerated Values: 0 bidirectional 1 unidirectional	.1.3.6.1.2.1.10.166.5.1.1.1.1.4
mplsLdpEntityAtmLsrConnectivity The peer LSR may be connected indirectly by means of an ATM VP so that the VPI values may be different on either endpoint so the label MUST be encoded entirely within the VCI field.	Enumerationr/w Enumerated Values: 1 direct 2 indirect	.1.3.6.1.2.1.10.166.5.1.1.1.1.5
mplsLdpEntityAtmDefaultControlVpi The default VPI value for the non-MPLS connection. The default value of this is 0 (zero) but other values may be configured. This object allows a different value to be configured.	ATM-TC-MIBAtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.1.1.1.6
mplsLdpEntityAtmDefaultControlVci The Default VCI value for a non-MPLS connection. The default value of this is 32 but other values may be configured. This object allows a different value to be configured.	MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.1.1.1.7
mplsLdpEntityAtmUnlabTrafVpi VPI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the default value of the 'mplsLdpEntityAtmDefaultControlVpi', howev…	ATM-TC-MIBAtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.1.1.1.8
mplsLdpEntityAtmUnlabTrafVci VCI value of the VCC supporting unlabeled traffic. This non-MPLS connection is used to carry unlabeled (IP) packets. The default value is the same as the default value of the 'mplsLdpEntityAtmDefaultControlVci', however…	MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.1.1.1.9
mplsLdpEntityAtmStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.5.1.1.1.1.10
mplsLdpEntityAtmRowStatus The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After Session Establishment', and again describ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.5.1.1.1.1.11

The MPLS LDP Entity ATM Label Range (LR) Table.
The purpose of this table is to provide a mechanism
for configuring a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.
          
There must exist at least one entry in this
table for every LDP Entity that has
'mplsLdpEntityOptionalParameters' object with
a value of 'atmSessionParameters'.

mplsLdpEntityAtmLREntry row .1.3.6.1.2.1.10.166.5.1.1.2.1

A row in the LDP Entity ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs. These are the same
data used …

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex mplsLdpEntityAtmLRMinVpi mplsLdpEntityAtmLRMinVci

Column	Syntax	OID
mplsLdpEntityAtmLRMinVpi The minimum VPI number configured for this range. The value of zero is a valid value for the VPI portion of the label.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.1.2.1.1
mplsLdpEntityAtmLRMinVci The minimum VCI number configured for this range.	MPLS-TC-STD-MIBMplsAtmVcIdentifier Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.1.2.1.2
mplsLdpEntityAtmLRMaxVpi The maximum VPI number configured for this range.	ATM-TC-MIBAtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.1.2.1.3
mplsLdpEntityAtmLRMaxVci The maximum VCI number configured for this range.	MPLS-TC-STD-MIBMplsAtmVcIdentifierr/w Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.1.2.1.4
mplsLdpEntityAtmLRStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.166.5.1.1.2.1.5
mplsLdpEntityAtmLRRowStatus The status of this conceptual row. All writable objects in this row may be modified at any time, however, as described in detail in the section entitled, 'Changing Values After Session Establishment', and again describ…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.166.5.1.1.2.1.6

A table which relates sessions in the
'mplsLdpSessionTable' and their label
range intersections.  There could be one
or more label range intersections between an
LDP Entity and LDP Peer using ATM as the
underlying  media.  Each row represents
a single label range intersection.
          
This table cannot use the 'AUGMENTS'
clause because there is not necessarily
a one-to-one mapping between this table
and the mplsLdpSessionTable.

mplsLdpAtmSessionEntry row .1.3.6.1.2.1.10.166.5.1.2.1.1

An entry in this table represents information on a
single label range intersection between an LDP Entity
and LDP Peer.

The information contained in a row is read-only.

Indexes

MPLS-LDP-STD-MIBmplsLdpEntityLdpId MPLS-LDP-STD-MIBmplsLdpEntityIndex MPLS-LDP-STD-MIBmplsLdpPeerLdpId mplsLdpSessionAtmLRLowerBoundVpi mplsLdpSessionAtmLRLowerBoundVci

Column	Syntax	OID
mplsLdpSessionAtmLRLowerBoundVpi The minimum VPI number for this range.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.2.1.1.1
mplsLdpSessionAtmLRLowerBoundVci The minimum VCI number for this range.	MPLS-TC-STD-MIBMplsAtmVcIdentifier Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.2.1.1.2
mplsLdpSessionAtmLRUpperBoundVpi The maximum VPI number for this range.	ATM-TC-MIBAtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.2.1.10.166.5.1.2.1.1.3
mplsLdpSessionAtmLRUpperBoundVci The maximum VCI number for this range.	MPLS-TC-STD-MIBMplsAtmVcIdentifier Type Constraints: range: 32..65535	.1.3.6.1.2.1.10.166.5.1.2.1.1.4