Standard view Table view

MPLS-LDP-ATM-STD-MIB

        Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3815. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html
        
This MIB contains managed object definitions for
configuring and monitoring the Multiprotocol Label
Switching (MPLS), Label Distribution Protocol (LDP),
utilizing Asynchronous Transfer Mode (ATM) as the Layer 2
media.
Source file
MPLS-LDP-ATM-STD-MIB
Last revised
Identity
mplsLdpAtmStdMIB
Base OID
1.3.6.1.2.1.10.166.5
Imported Objects
ATM-TC-MIB AtmVpIdentifier
IF-MIB InterfaceIndexOrZero
MPLS-LDP-STD-MIB mplsLdpEntityIndex mplsLdpEntityLdpId mplsLdpPeerLdpId
MPLS-TC-STD-MIB MplsAtmVcIdentifier mplsStdMIB
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MPLS-LDP-ATM-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MPLS-LDP-ATM-STD-MIB::mplsLdpAtmStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPLS-LDP-ATM-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPLS-LDP-ATM-STD-MIB::mplsLdpAtmStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (34)
mplsLdpAtmStdMIB
.1.3.6.1.2.1.10.166.5
mplsLdpAtmObjects
.1.3.6.1.2.1.10.166.5.1
mplsLdpEntityAtmObjects
.1.3.6.1.2.1.10.166.5.1.1
mplsLdpEntityAtmTable
.1.3.6.1.2.1.10.166.5.1.1.1
mplsLdpEntityAtmEntry
MPLS-LDP-STD-MIBmplsLdpEntityLdpIdMPLS-LDP-STD-MIBmplsLdpEntityIndex
 .1.3.6.1.2.1.10.166.5.1.1.1.1
mplsLdpEntityAtmIfIndexOrZero r/w
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.2.1.10.166.5.1.1.1.1.1
mplsLdpEntityAtmStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.10.166.5.1.1.1.1.10
mplsLdpEntityAtmRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.166.5.1.1.1.1.11
mplsLdpEntityAtmMergeCap r/w
Enumeration
 .1.3.6.1.2.1.10.166.5.1.1.1.1.2
mplsLdpEntityAtmLRComponents
Unsigned32
 .1.3.6.1.2.1.10.166.5.1.1.1.1.3
mplsLdpEntityAtmVcDirectionality r/w
Enumeration
 .1.3.6.1.2.1.10.166.5.1.1.1.1.4
mplsLdpEntityAtmLsrConnectivity r/w
Enumeration
 .1.3.6.1.2.1.10.166.5.1.1.1.1.5
mplsLdpEntityAtmDefaultControlVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.1.1.6
mplsLdpEntityAtmDefaultControlVci r/w
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.1.1.7
mplsLdpEntityAtmUnlabTrafVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.1.1.8
mplsLdpEntityAtmUnlabTrafVci r/w
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.1.1.9
mplsLdpEntityAtmLRTable
.1.3.6.1.2.1.10.166.5.1.1.2
mplsLdpEntityAtmLREntry
MPLS-LDP-STD-MIBmplsLdpEntityLdpIdMPLS-LDP-STD-MIBmplsLdpEntityIndexmplsLdpEntityAtmLRMinVpimplsLdpEntityAtmLRMinVci
 .1.3.6.1.2.1.10.166.5.1.1.2.1
mplsLdpEntityAtmLRMinVpi
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.2.1.1
mplsLdpEntityAtmLRMinVci
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.2.1.2
mplsLdpEntityAtmLRMaxVpi r/w
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.2.1.3
mplsLdpEntityAtmLRMaxVci r/w
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.1.2.1.4
mplsLdpEntityAtmLRStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.10.166.5.1.1.2.1.5
mplsLdpEntityAtmLRRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.166.5.1.1.2.1.6
mplsLdpAtmSessionObjects
.1.3.6.1.2.1.10.166.5.1.2
mplsLdpAtmSessionTable
.1.3.6.1.2.1.10.166.5.1.2.1
mplsLdpAtmSessionEntry
MPLS-LDP-STD-MIBmplsLdpEntityLdpIdMPLS-LDP-STD-MIBmplsLdpEntityIndexMPLS-LDP-STD-MIBmplsLdpPeerLdpIdmplsLdpSessionAtmLRLowerBoundVpimplsLdpSessionAtmLRLowerBoundVci
 .1.3.6.1.2.1.10.166.5.1.2.1.1
mplsLdpSessionAtmLRLowerBoundVpi
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.2.1.1.1
mplsLdpSessionAtmLRLowerBoundVci
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.2.1.1.2
mplsLdpSessionAtmLRUpperBoundVpi
ATM-TC-MIBAtmVpIdentifier
 .1.3.6.1.2.1.10.166.5.1.2.1.1.3
mplsLdpSessionAtmLRUpperBoundVci
MPLS-TC-STD-MIBMplsAtmVcIdentifier
 .1.3.6.1.2.1.10.166.5.1.2.1.1.4
mplsLdpAtmConformance
.1.3.6.1.2.1.10.166.5.2
mplsLdpAtmGroups
.1.3.6.1.2.1.10.166.5.2.1
mplsLdpAtmCompliances
.1.3.6.1.2.1.10.166.5.2.2
Dependencies (15) 7 direct · 8 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. ATM-TC-MIBrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. DIFFSERV-DSCP-TCrfc
  9. INET-ADDRESS-MIBrfc
  10. INTEGRATED-SERVICES-MIBrfc
  11. DIFFSERV-MIBrfc
  12. IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
  13. MPLS-TC-STD-MIBrfc
  14. MPLS-LSR-STD-MIBrfc
  15. MPLS-LDP-STD-MIBrfc
  16. MPLS-LDP-ATM-STD-MIBrfcselected
Conformance Groups (1)
mplsLdpAtmGroup
mplsLdpEntityAtmIfIndexOrZero mplsLdpEntityAtmMergeCap mplsLdpEntityAtmLRComponents mplsLdpEntityAtmVcDirectionality mplsLdpEntityAtmLsrConnectivity mplsLdpEntityAtmDefaultControlVpi mplsLdpEntityAtmDefaultControlVci mplsLdpEntityAtmUnlabTrafVpi mplsLdpEntityAtmUnlabTrafVci mplsLdpEntityAtmStorageType mplsLdpEntityAtmRowStatus mplsLdpEntityAtmLRMaxVpi mplsLdpEntityAtmLRMaxVci mplsLdpEntityAtmLRStorageType mplsLdpEntityAtmLRRowStatus mplsLdpSessionAtmLRUpperBoundVpi mplsLdpSessionAtmLRUpperBoundVci
Objects that apply to all MPLS LDP implementations
using ATM as the Layer 2.
 .1.3.6.1.2.1.10.166.5.2.1.1
Compliance Statements (2)

OID .1.3.6.1.2.1.10.166.5.2.2.1
The Module is implemented with support for
read-create and read-write. In other words,
both monitoring and configuration
are available when using this MODULE-COMPLIANCE.
Required groups
mandatory mplsLdpAtmGroup
Object refinements
ObjectAccessSyntaxDescription
mplsLdpEntityAtmRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not required.
mplsLdpEntityAtmLRRowStatus
SNMPv2-TCRowStatus
active(1)
Support for createAndWait and notInService is not required.

OID .1.3.6.1.2.1.10.166.5.2.2.2
The Module is implemented with support for
read-only. In other words, only monitoring
is available by implementing this MODULE-COMPLIANCE.
Required groups
mandatory mplsLdpAtmGroup
Object refinements
ObjectAccessSyntaxDescription
mplsLdpEntityAtmIfIndexOrZero readonly
Write access is not required.
mplsLdpEntityAtmMergeCap readonly
Write access is not required.
mplsLdpEntityAtmVcDirectionality readonly
Write access is not required.
mplsLdpEntityAtmLsrConnectivity readonly
Write access is not required.
mplsLdpEntityAtmDefaultControlVpi readonly
Write access is not required.
mplsLdpEntityAtmDefaultControlVci readonly
Write access is not required.
mplsLdpEntityAtmUnlabTrafVpi readonly
Write access is not required.
mplsLdpEntityAtmUnlabTrafVci readonly
Write access is not required.
mplsLdpEntityAtmStorageType readonly
Write access is not required.
mplsLdpEntityAtmRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active is the
only status that needs to be supported.
mplsLdpEntityAtmLRMaxVpi readonly
Write access is not required.
mplsLdpEntityAtmLRMaxVci readonly
Write access is not required.
mplsLdpEntityAtmLRStorageType readonly
Write access is not required.
mplsLdpEntityAtmLRRowStatus readonly
SNMPv2-TCRowStatus
active(1)
Write access is not required, and active is the
only status that needs to be supported.