LUM-PM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
610

pmIntervalTable

table deprecated
.1.3.6.1.4.1.8708.2.15.2.2.1 · 1 row entry · 55 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmIntervalTable' 
The line tx 15 min interval table.
pmIntervalEntry row .1.3.6.1.4.1.8708.2.15.2.2.1.1
An entry in the interval table.
Indexes
Column Syntax OID
pmIntervalSubrack
The subrack number for the interface in question.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.1
pmIntervalSlot
The slot number for the interface in question.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.2
pmIntervalPort
The port number for the interface in question.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.3
pmIntervalNumber
A number between 1 and 40, which identifies the
interval for which the set of statistics is
available. The interval identified by 1 is the
most recently completed 24 hour interval, and the
interval identified by N is th…
Unsigned32
Constraints:
range: 1-40
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.4
pmIntervalIsSuspect
This variable indicates if the data for this
interval is suspect. The interval may for example
contain measurements for a part of the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.5
pmIntervalRxES
The counter associated with the number of
Errored Seconds in a particular 15 min interval
during the past 15 min intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.6
pmIntervalRxSES
The counter associated with the number of
Severely Errored Seconds in a particular 15 min
interval during the past 15 min intervals.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.7
pmIntervalRxBBE
The counter associated with the number of
Background Block Errors in a particular 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.8
pmIntervalRxUAS
The counter associated with the number of
Unavailable Seconds in a particular 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.9
pmIntervalTxES
The counter associated with the number of
Errored Seconds in a particular 15 min interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.10
pmIntervalTxSES
The counter associated with the number of
Severely Errored Seconds in a particular 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.11
pmIntervalTxBBE
The counter associated with the number of
Background Block Errors in the current 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.12
pmIntervalTxUAS
The counter associated with the number of
Unavailable Seconds in a particular 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.13
pmIntervalName
The name of the interface.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.14
pmIntervalRxPowerLevel
The received power level in units of 0.1 dBm
sampled some time during a particular 15 minute
interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.15
pmIntervalGbeMaxUtilization
The maximum bandwidth utilization of the
GbE signal during a particular 15 minute interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.16
pmIntervalTxPowerLevel
The transmitted power level in units of 0.1 dBm
sampled some time during a particular 15 minute
interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.17
pmIntervalRxUndersizedFrames
The amount of undersized frames
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.18
pmIntervalRxOversizedFrames
The amount of oversized frames
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.19
pmIntervalRxFragments
The amount of fragments
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.20
pmIntervalRxFcsErrors
The amount of frames with FCS or alignment errors
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.21
pmIntervalRxInvalidCeVlanId
The amount of frames with invalid CE-VLAN id
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.22
pmIntervalTxOctets
The amount of octets transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.23
pmIntervalTxFrames
The amount of frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.24
pmIntervalTxUnicastFrames
The amount of unicast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.25
pmIntervalTxMulticastFrames
The amount of multicast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.26
pmIntervalTxBroadcastFrames
The amount of broadcast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.27
pmIntervalRxOctets
The amount of octets received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.28
pmIntervalRxFrames
The amount of frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.29
pmIntervalRxUnicastFrames
The amount of unicast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.30
pmIntervalRxMulticastFrames
The amount of multicast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.31
pmIntervalRxBroadcastFrames
The amount of broadcast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.32
pmIntervalIngressGreenFrameCount
The amount of green frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.33
pmIntervalIngressYellowFrameCount
The amount of yellow frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.34
pmIntervalIngressRedFrameCount
The amount of red frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.35
pmIntervalIngressGreenOctetCount
The amount of green octets sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.36
pmIntervalIngressYellowOctetCount
The amount of yellow octets sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.37
pmIntervalIngressRedOctetCount
The amount of red octects sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.38
pmIntervalEgressGreenFrameCount
The amount of green frames received by the egress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.39
pmIntervalEgressGreenOctetCount
The amount of green octets received by the egress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.40
pmIntervalGreenFrameDiscards
The amount of green frames discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.41
pmIntervalYellowFrameDiscards
The amount of yellow frames discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.42
pmIntervalGreenOctetDiscards
The amount of green octets discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.43
pmIntervalYellowOctetDiscards
The amount of yellow octets discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.44
pmIntervalTwoWayFrameDelay
The time required to transmit a service frame from source to destination
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.45
pmIntervalTwoWayFrameDelayVariation
The difference in delay between two service frames
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.46
pmIntervalFrameLossRatioNearEnd
The number of service frames not delivered divided by the total number of service frames at near end
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.47
pmIntervalFrameLossRatioFarEnd
The number of service frames not delivered divided
by the total number of service frames at far end
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.48
pmIntervalUnavailabilityNearEnd
The @todo
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.49
pmIntervalUnavailabilityFarEnd
The @todo
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.50
pmIntervalOneWayFrameDelayVariation
The difference in delay between two service frames
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.51
pmIntervalTxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
transmitted ethernet signal during a particular 15 minute interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.52
pmIntervalRxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
received ethernet signal during a particular 15 minute interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.53
pmIntervalStartTime
The start time of the quarter where
PM-reports are generated
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.54
pmIntervalStopTime
The end time of the quarter where
PM-reports are generated
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.2.1.1.55

pmInterval24hTable

table deprecated
.1.3.6.1.4.1.8708.2.15.2.3.1 · 1 row entry · 55 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmInterval24hTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmInterval24hTable' 
The line tx 24 hour interval table.
pmInterval24hEntry row .1.3.6.1.4.1.8708.2.15.2.3.1.1
An entry in the interval table.
Indexes
Column Syntax OID
pmInterval24hSubrack
The subrack number for the interface in question.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.1
pmInterval24hSlot
The slot number for the interface in question.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.2
pmInterval24hPort
The port number for the interface in question.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.3
pmInterval24hNumber
A number between 1 and 40, which identifies the
interval for which the set of statistics is
available. The interval identified by 1 is the most
recently completed 24 hour interval, and the
interval identified by N is th…
PmInterval24hNumber
Type Constraints:
range: 1..40
Description:
A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately pre…
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.4
pmInterval24hIsSuspect
This variable indicates if the data for this
interval is suspect. The interval may for example
contain measurements for a part of the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.5
pmInterval24hRxES
The counter associated with the number of
Errored Seconds in a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.6
pmInterval24hRxSES
The counter associated with the number of
Severely Errored Seconds in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.7
pmInterval24hRxBBE
The counter associated with the number of
Background Block Errors in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.8
pmInterval24hRxUAS
The counter associated with the number of
Unavailable Seconds in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.9
pmInterval24hTxES
The counter associated with the number of
Errored Seconds in a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.10
pmInterval24hTxSES
The counter associated with the number of
Severely Errored Seconds in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.11
pmInterval24hTxBBE
The counter associated with the number of
Background Block Errors in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.12
pmInterval24hTxUAS
The counter associated with the number of
Unavailable Seconds in a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.13
pmInterval24hName
The name of the interface.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.14
pmInterval24hRxPowerLevel
The received power level in units of 0.1 dBm
sampled some time during a particular 24 hour
interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.15
pmInterval24hGbeMaxUtilization
The maximum bandwidth utilization of the
GbE signal during a particular 24 hour interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.16
pmInterval24hTxPowerLevel
The transmitted power level in units of 0.1 dBm
sampled some time during a particular 24 hour
interval.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.17
pmInterval24hRxUndersizedFrames
The amount of undersized frames
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.18
pmInterval24hRxOversizedFrames
The amount of oversized frames
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.19
pmInterval24hRxFragments
The amount of fragments
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.20
pmInterval24hRxFcsErrors
The amount of frames with FCS or alignment errors
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.21
pmInterval24hRxInvalidCeVlanId
The amount of frames with invalid CE-VLAN id
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.22
pmInterval24hTxOctets
The amount of octets transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.23
pmInterval24hTxFrames
The amount of frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.24
pmInterval24hTxUnicastFrames
The amount of unicast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.25
pmInterval24hTxMulticastFrames
The amount of multicast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.26
pmInterval24hTxBroadcastFrames
The amount of multicast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.27
pmInterval24hRxOctets
The amount of octets received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.28
pmInterval24hRxFrames
The amount of frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.29
pmInterval24hRxUnicastFrames
The amount of unicast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.30
pmInterval24hRxMulticastFrames
The amount of multicast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.31
pmInterval24hRxBroadcastFrames
The amount of broadcast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.32
pmInterval24hIngressGreenFrameCount
The amount of green frames sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.33
pmInterval24hIngressYellowFrameCount
The amount of yellow frames sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.34
pmInterval24hIngressRedFrameCount
The amount of red frames sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.35
pmInterval24hIngressGreenOctetCount
The amount of green octets sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.36
pmInterval24hIngressYellowOctetCount
The amount of yellow octets sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.37
pmInterval24hIngressRedOctetCount
The amount of red octets sent by ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.38
pmInterval24hEgressGreenFrameCount
The amount of green frames received by egress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.39
pmInterval24hEgressGreenOctetCount
The amount of green octets received by egress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.40
pmInterval24hGreenFrameDiscards
The amount of green frames discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.41
pmInterval24hYellowFrameDiscards
The amount of yellow frames discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.42
pmInterval24hGreenOctetDiscards
The amount of green octets discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.43
pmInterval24hYellowOctetDiscards
The amount of yellow octets discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.44
pmInterval24hTwoWayFrameDelay
The time required to transmit a service frame from
source to destination during a particular 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.45
pmInterval24hTwoWayFrameDelayVariation
The difference in delay of two service frames
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.46
pmInterval24hFrameLossRatioNearEnd
The number of service frames not delivered divided
by the total number of service frames at near end
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.47
pmInterval24hFrameLossRatioFarEnd
The number of service frames not delivered divided
by the total number of service frames at far end
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.48
pmInterval24hUnavailabilityNearEnd
The @todo
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.49
pmInterval24hUnavailabilityFarEnd
The @todo
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.50
pmInterval24hOneWayFrameDelayVariation
The difference in delay of two service frames
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.51
pmInterval24hTxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
transmitted ethernet signal during a particular 24
hour interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.52
pmInterval24hRxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
received ethernet signal during a particular 24 hour
interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.53
pmInterval24hStartTime
The start time of the quarter where
PM-reports are generated
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.54
pmInterval24hStopTime
The end time of the quarter where
PM-reports are generated
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.3.1.1.55

pmFileTable

table
.1.3.6.1.4.1.8708.2.15.2.5.1 · 1 row entry · 7 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmFileTable' 
The line tx 15 min interval table.
pmFileEntry row .1.3.6.1.4.1.8708.2.15.2.5.1.1
An entry in the 15 minute log file table.
Indexes
Column Syntax OID
pmFileIndex
A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately pre…
PmInterval15mNumber
Type Constraints:
range: 1..96
Description:
A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately pre…
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.1
pmFileName
The name of the file.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.2
pmFileCreatedTime
The time when the file was created.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.3
pmFileSeqNumber
The last sequence number used when issuing
a notification for this file.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.4
pmFileStartTime
The time when collection started for this file.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.5
pmFileStopTime
The time when collection stopped for this file.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.6
pmFileUrl
The full path indicating where the file
can be found on the network element.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.5.1.1.7

pmIfTable

table
.1.3.6.1.4.1.8708.2.15.2.6.1 · 1 row entry · 72 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmIfTable' 
The pm interface table.
pmIfEntry row .1.3.6.1.4.1.8708.2.15.2.6.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmIfIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.1
pmIfName
The management name of the interface, for
example 'mrt:1:2:1-2'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.2
pmIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.3
pmIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.4
pmIfPort
The number of the TX port for the interface.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.5
pmIfPmReportMode
The mode PM reporting on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.6
pmIfRxCurrentES
The counter associated with the number of
Errored Seconds in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.7
pmIfRxCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.8
pmIfRxCurrentBBE
The counter associated with the number of
Background Block Errors in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.9
pmIfRxCurrentUAS
The counter associated with the number of
Unavailable Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.10
pmIfTxCurrentES
The counter associated with the number of
Errored Seconds in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.11
pmIfTxCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.12
pmIfTxCurrentBBE
The counter associated with the number of
Background Block Errors in in the current
15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.13
pmIfTxCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.14
pmIfRx24hCurrentES
The counter associated with the number of
Errored Seconds in the current 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.15
pmIfRx24hCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.16
pmIfRx24hCurrentBBE
The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.17
pmIfRx24hCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.18
pmIfTx24hCurrentES
The counter associated with the number of
Errored Seconds in the current 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.19
pmIfTx24hCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.20
pmIfTx24hCurrentBBE
The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.21
pmIfTx24hCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.22
pmIfRxESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.23
pmIfRxSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.24
pmIfRxBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
In case of iSFP E1 the default value is reduced to 1000.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.25
pmIfRxUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.26
pmIfTxESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.27
pmIfTxSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.28
pmIfTxBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
In case of iSFP E1 the default value is reduced to 1000.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.29
pmIfTxUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.30
pmIfRx24hESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.31
pmIfRx24hSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.32
pmIfRx24hBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
In case of iSFP E1 the default value is reduced to 10000.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.33
pmIfRx24hUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.34
pmIfTx24hESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.35
pmIfTx24hSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.36
pmIfTx24hBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
In case of iSFP E1 the default value is reduced to 10000.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.37
pmIfTx24hUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.38
pmIfRxES
Errored seconds (ES) Rx 15 min threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
associate…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.39
pmIfRxSES
Severely errored seconds (SES) Rx 15 min
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 15 minute p…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.40
pmIfRxBBE
Background block errors (BBE) Rx 15 min
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 15 minute per…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.41
pmIfRxUAS
Unavailable seconds (UAS) Rx 15 min threshold
exceeded.

A: The number of unavailable seconds during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.42
pmIfTxES
Errored seconds (ES) Tx 15 min threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
associate…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.43
pmIfTxSES
Severely errored seconds (SES) Tx 15 min
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 15 minute p…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.44
pmIfTxBBE
Background block errors (BBE) Tx 15 min
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 15 minute per…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.45
pmIfTxUAS
Unavailable seconds (UAS) Tx 15 min threshold
exceeded.

A: The number of unavailable seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.46
pmIfRx24hES
Errored seconds (ES) Rx 24 hour threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.47
pmIfRx24hSES
Severely errored seconds (SES) Rx 24 hour
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 24 hour pe…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.48
pmIfRx24hBBE
Background block errors (BBE) Rx 24 hour
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 24 hour peri…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.49
pmIfRx24hUAS
Unavailable seconds (UAS) Rx 24 hour threshold
exceeded.

A: The number of unavailable seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
a…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.50
pmIfTx24hES
Errored seconds Tx (ES) 24 hour threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.51
pmIfTx24hSES
Severely errored seconds (SES) Tx 24 hour
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 24 hour pe…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.52
pmIfTx24hBBE
Background block errors (BBE) Tx 24 hour
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 24 hour peri…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.53
pmIfTx24hUAS
Unavailable seconds (UAS) Tx 24 hour threshold
exceeded.

A: The number of unavailable seconds during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
a…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.54
pmIfRxPort
The number of the RX port for the interface.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.55
pmIfReset15Min
Reset the 15 minute PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.56
pmIfReset24H
Reset the 24 hour PM counters for the interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.57
pmIfAdminStatus
Administrative state for the PM object.

down - Alarms are not sent.

up - Alarms are sent

service - Alarms are not sent
LUM-TCBoardOrInterfaceAdminStatusr/w
Type Values:
1down
2service
3up
Description:
The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.58
pmIfOperStatus
The operational state for the PM object.

notPresent - The physical resource is not available.

down - The object is disabled.

up - The object is enabled.
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.59
pmIfIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.60
pmIfIsSuspect24H
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.61
pmIfInstallCommand
Generic command to perform installation tasks.

Tasks:

rxPower - measure the received power
LUM-TCCommandString
Description:
tbd
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.62
pmIfRxPowerLevel
The received power level in units of 0.1 dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.63
pmIfInitialPowerLevel
The received power level in units of 0.1 dBm
measured at installation of the link.
Integer32r/w
Constraints:
range: -10000-10000
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.64
pmIfRxGbeMaxUtilization
The maximum bandwidth utilization of the
ethernet signal during the current 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.65
pmIfRx24hGbeMaxUtilization
The maximum bandwidth utilization of the
ethernet signal during the current 24 h
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.66
pmIfTxPowerLevel
The transmitted power level in units of 0.1 dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.67
pmIfObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.68
pmIfDelay
The delay of the signal.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.69
pmIfRxBEREstimation
The estimated Bit Error Rate after FEC.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.70
pmIfIfNo
The interface number of the port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.71
pmIfUpPortId
Internal port reference for traffic unit.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.6.1.1.72

pmFile24hTable

table
.1.3.6.1.4.1.8708.2.15.2.8.1 · 1 row entry · 7 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmFile24hTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmFile24hTable' 
The line tx 24 hour interval table.
pmFile24hEntry row .1.3.6.1.4.1.8708.2.15.2.8.1.1
An entry in the 24 hour log file table.
Indexes
Column Syntax OID
pmFile24hIndex
A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately pre…
PmInterval24hNumber
Type Constraints:
range: 1..40
Description:
A number which identifies the interval for which
the set of statistics is available.
The interval identified by 1 is the most recently
completed interval, and the interval identified
by N is the interval immediately pre…
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.1
pmFile24hName
The name of the file.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.2
pmFile24hCreatedTime
The time when the file was created.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.3
pmFile24hSeqNumber
The last sequence number used when issuing
a notification for this file.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.4
pmFile24hStartTime
The time when collection started for this file.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.5
pmFile24hStopTime
The time when collection stopped for this file.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.6
pmFile24hUrl
The full path indicating where the file
can be found on the network element.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.8.1.1.7

pmEthTdTable

table
.1.3.6.1.4.1.8708.2.15.2.10.1 · 1 row entry · 94 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthTdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthTdTable' 
The pm interface table.
pmEthTdEntry row .1.3.6.1.4.1.8708.2.15.2.10.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthTdIndex
An arbitrary index assigned to each if entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.1
pmEthTdName
The management name of the interface, for
example 'mrt:1:2:1-2'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.2
pmEthTdSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.3
pmEthTdSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.4
pmEthTdPort
The number of the Tx port for the interface.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.5
pmEthTdPmReportMode
The mode PM reporting on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.6
pmEthTdRxPort
The number of the Rx port for the interface.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.7
pmEthTdReset15Min
Reset the 15 minute PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.8
pmEthTdReset24H
Reset the 24 hour PM counters for the interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.9
pmEthTdAdminStatus
Administrative state for the PM object.

down - Alarms are not sent.

up - Alarms are sent

service - Alarms are not sent
Enumerationr/w
Enumerated Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.10
pmEthTdOperStatus
The operational state for the PM object.

notPresent - The physical resource is not available.

down - The object is disabled.

up - The object is enabled.
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.11
pmEthTdIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.12
pmEthTdIsSuspect24h
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.13
pmEthTdCurrentRxUndersizedFrames
The amount of undersized frames
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.14
pmEthTdCurrentRxOversizedFrames
The amount of oversized frames
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.15
pmEthTdCurrentRxFragments
The amount of fragments
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.16
pmEthTdCurrentRxFcsErrors
The amount of frames with jabbers, FCS errors, alignment errors, or symbol errors
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.17
pmEthTdCurrentRxInvalidCeVlanId
The amount of frames with invalid CE-VLAN id
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.18
pmEthTdCurrentTxOctets
The amount of octets transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.19
pmEthTdCurrentTxFrames
The amount of frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.20
pmEthTdCurrentTxUnicastFrames
The amount of unicast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.21
pmEthTdCurrentTxMulticastFrames
The amount of multicast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.22
pmEthTdCurrentTxBroadcastFrames
The amount of broadcast frames transmitted OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.23
pmEthTdCurrentRxOctets
The amount of octets received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.24
pmEthTdCurrentRxFrames
The amount of frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.25
pmEthTdCurrentRxUnicastFrames
The amount of unicast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.26
pmEthTdCurrentRxMulticastFrames
The amount of multicast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.27
pmEthTdCurrentRxBroadcastFrames
The amount of broadcast frames received OK
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.28
pmEthTdCurrent24hRxUndersizedFrames
The amount of undersized frames
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.29
pmEthTdCurrent24hRxOversizedFrames
The amount of oversized frames
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.30
pmEthTdCurrent24hRxFragments
The amount of fragments
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.31
pmEthTdCurrent24hRxFcsErrors
The amount of frames with jabbers, FCS errors, alignment errors, or symbol errors
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.32
pmEthTdCurrent24hRxInvalidCeVlanId
The amount of frames with invalid CE-VLAN id
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.33
pmEthTdCurrent24hTxOctets
The amount of octets transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.34
pmEthTdCurrent24hTxFrames
The amount of frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.35
pmEthTdCurrent24hTxUnicastFrames
The amount of unicast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.36
pmEthTdCurrent24hTxMulticastFrames
The amount of multicast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.37
pmEthTdCurrent24hTxBroadcastFrames
The amount of broadcast frames transmitted OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.38
pmEthTdCurrent24hRxOctets
The amount of octets received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.39
pmEthTdCurrent24hRxFrames
The amount of frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.40
pmEthTdCurrent24hRxUnicastFrames
The amount of unicast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.41
pmEthTdCurrent24hRxMulticastFrames
The amount of multicast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.42
pmEthTdCurrent24hRxBroadcastFrames
The amount of broadcast frames received OK
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.43
pmEthTdObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.44
pmEthTdRxUndersizedFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.45
pmEthTdRxOversizedFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.46
pmEthTdRxFragmentsThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.47
pmEthTdRxFcsErrorsThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.48
pmEthTdRxInvalidCeVlanIdThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10

A value of 0 (zero) will disable the alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.49
pmEthTd24hRxUndersizedFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.50
pmEthTd24hRxOversizedFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.51
pmEthTd24hRxFragmentsThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.52
pmEthTd24hRxFcsErrorsThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.53
pmEthTd24hRxInvalidCeVlanIdThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10

A value of 0 (zero) will disable the alarm.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.54
pmEthTdRxUndersizedFrames
Rx undersized frames threshold exceeded.

A: The number of undersized frames during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated unders…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.55
pmEthTdRxOversizedFrames
Rx oversized frames threshold exceeded.

A: The number of oversized frames during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated oversize…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.56
pmEthTdRxFragments
Rx fragments threshold exceeded.

A: The number of fragmented frames during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated fragmented fra…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.57
pmEthTdRxFcsErrors
Rx FCS errors threshold exceeded.

A: The number of FCS or alignment errors during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated FCS err…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.58
pmEthTdRxInvalidCeVlanId
Rx invalid CE VLAN id threshold exceeded.

A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated inva…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.59
pmEthTd24hRxUndersizedFrames
Rx undersized frames 24h threshold exceeded.

A: The number of undersized frames during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated unde…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.60
pmEthTd24hRxOversizedFrames
Rx oversized frames 24h threshold exceeded.

A: The number of oversized frames during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated oversi…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.61
pmEthTd24hRxFragments
Rx fragments 24h threshold exceeded.

A: The number of fragmented frames during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated fragmented f…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.62
pmEthTd24hRxFcsErrors
Rx FCS errors 24h threshold exceeded.

A: The number of FCS or alignment errors during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated FCS e…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.63
pmEthTd24hRxInvalidCeVlanId
Rx invalid CE VLAN id 24h threshold exceeded.

A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated in…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.64
pmEthTdCurrentTxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.65
pmEthTdCurrentRxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.66
pmEthTdCurrent24hTxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.67
pmEthTdCurrent24hRxEthMaxUtilization
The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.68
pmEthTdResetCont
Reset the free running PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set resetCont reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.69
pmEthTdCurrentContRxUndersizedFrames
The amount of undersized frames. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.70
pmEthTdCurrentContRxOversizedFrames
The amount of oversized frames. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.71
pmEthTdCurrentContRxFragments
The amount of fragments. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.72
pmEthTdCurrentContRxFcsErrors
The amount of frames with FCS or alignment errors.
Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.73
pmEthTdCurrentContRxInvalidCeVlanId
The amount of frames with invalid CE-VLAN id.
Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.74
pmEthTdCurrentContTxOctets
The amount of octets transmitted OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.75
pmEthTdCurrentContTxFrames
The amount of frames transmitted OK. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.76
pmEthTdCurrentContTxUnicastFrames
The amount of unicast frames transmitted OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.77
pmEthTdCurrentContTxMulticastFrames
The amount of multicast frames transmitted OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.78
pmEthTdCurrentContTxBroadcastFrames
The amount of broadcast frames transmitted OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.79
pmEthTdCurrentContRxOctets
The amount of octets received OK. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.80
pmEthTdCurrentContRxFrames
The amount of frames received OK. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.81
pmEthTdCurrentContRxUnicastFrames
The amount of unicast frames received OK. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.82
pmEthTdCurrentContRxMulticastFrames
The amount of multicast frames received OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.83
pmEthTdCurrentContRxBroadcastFrames
The amount of broadcast frames received OK. Free running
counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.84
pmEthTdVlanId
User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID -1 is assumed.
Integer32
Constraints:
range: -1-4094
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.85
pmEthTdIfNo
The interface number of the port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.86
pmEthTdUpPortId
Internal port reference for traffic unit.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.87
pmEthTdCurrentRxOverloadFrames
The amount of overload frames
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.88
pmEthTdRxOverloadFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.89
pmEthTdRxOverloadFrames
Rx overload frames threshold exceeded.

A: The number of overload frames during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
associated overload f…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.90
pmEthTdCurrent24hRxOverloadFrames
The amount of overload frames
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.91
pmEthTd24hRxOverloadFramesThreshold
Sets the threshold for the alarm,
(in no. of frames).

Default value 10
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.92
pmEthTd24hRxOverloadFrames
Rx overload frames 24h threshold exceeded.

A: The number of overload frames during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated overload…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.93
pmEthTdCurrentContRxOverloadFrames
The amount of overload frames. Free running counter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.10.1.1.94

pmEthTmTable

table obsolete
.1.3.6.1.4.1.8708.2.15.2.11.1 · 1 row entry · 40 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthTmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthTmTable' 
The pm interface table.
pmEthTmEntry row .1.3.6.1.4.1.8708.2.15.2.11.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthTmIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.1
pmEthTmName
The management name of the interface, for
example 'mrt:1:2:1-2'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.2
pmEthTmSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.3
pmEthTmSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.4
pmEthTmPort
The number of the TX port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.5
pmEthTmPmReportMode
The mode PM reporting on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.6
pmEthTmRxPort
The number of the RX port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.7
pmEthTmReset15Min
Reset the 15 minute PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.8
pmEthTmReset24H
Reset the 24 hour PM counters for the interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.9
pmEthTmAdminStatus
Administrative state for the PM object.

down - Alarms are not sent.

up - Alarms are sent

service - Alarms are not sent
Enumerationr/w
Enumerated Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.10
pmEthTmOperStatus
The operational state for the PM object.

notPresent - The physical resource is not available.

down - The object is disabled.

up - The object is enabled.
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.11
pmEthTmIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.12
pmEthTmIsSuspect24h
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.13
pmEthTmCurrentIngressGreenFrameCount
The amount of green frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.14
pmEthTmCurrentIngressYellowFrameCount
The amount of yellow frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.15
pmEthTmCurrentIngressRedFrameCount
The amount of red frames sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.16
pmEthTmCurrentIngressGreenOctetCount
The amount of green octets sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.17
pmEthTmCurrentIngressYellowOctetCount
The amount of yellow octets sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.18
pmEthTmCurrentIngressRedOctetCount
The amount of red octets sent by the ingress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.19
pmEthTmCurrentEgressGreenFrameCount
The amount of green frames received by the egress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.20
pmEthTmCurrentEgressGreenOctetCount
The amount of green octets received by the egress UNI
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.21
pmEthTmCurrentGreenFrameDiscards
The amount of green frames discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.22
pmEthTmCurrentYellowFrameDiscards
The amount of yellow frames discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.23
pmEthTmCurrentGreenOctetDiscards
The amount of green octets discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.24
pmEthTmCurrentYellowOctetDiscards
The amount of yellow octets discarded due to congestion
during a particular 15 minute interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.25
pmEthTmCurrent24hIngressGreenFrameCount
The amount of green frames sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.26
pmEthTmCurrent24hIngressYellowFrameCount
The amount of yellow frames sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.27
pmEthTmCurrent24hIngressRedFrameCount
The amount of red frames sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.28
pmEthTmCurrent24hIngressGreenOctetCount
The amount of green octets sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.29
pmEthTmCurrent24hIngressYellowOctetCount
The amount of yellow octets sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.30
pmEthTmCurrent24hIngressRedOctetCount
The amount of red octets sent by the ingress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.31
pmEthTmCurrent24hEgressGreenFrameCount
The amount of green frames received by the egress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.32
pmEthTmCurrent24hEgressGreenOctetCount
The amount of green octets received by the egress UNI
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.33
pmEthTmCurrent24hGreenFrameDiscards
The amount of green frames discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.34
pmEthTmCurrent24hYellowFrameDiscards
The amount of yellow frames discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.35
pmEthTmCurrent24hGreenOctetDiscards
The amount of green octets discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.36
pmEthTmCurrent24hYellowOctetDiscards
The amount of yellow octets discarded due to congestion
during a particular 24 hour interval.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.37
pmEthTmObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.38
pmEthTmInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.39
pmEthTmIdentifier
Unique identifier for the EVC.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.11.1.1.40

pmEthOamTable

table obsolete
.1.3.6.1.4.1.8708.2.15.2.12.1 · 1 row entry · 32 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthOamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthOamTable' 
The pm interface table.
pmEthOamEntry row .1.3.6.1.4.1.8708.2.15.2.12.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthOamIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.1
pmEthOamName
The management name of the interface, for
example 'mrt:1:2:1-2'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.2
pmEthOamSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.3
pmEthOamSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.4
pmEthOamPort
The number of the TX port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.5
pmEthOamPmReportMode
The mode PM reporting on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.6
pmEthOamRxPort
The number of the RX port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.7
pmEthOamReset15Min
Reset the 15 minute PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.8
pmEthOamReset24H
Reset the 24 hour PM counters for the interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.9
pmEthOamAdminStatus
Administrative state for the PM object.

down - Alarms are not sent.

up - Alarms are sent

service - Alarms are not sent
Enumerationr/w
Enumerated Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.10
pmEthOamOperStatus
The operational state for the PM object.

notPresent - The physical resource is not available.

down - The object is disabled.

up - The object is enabled.
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.11
pmEthOamIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.12
pmEthOamIsSuspect24h
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.13
pmEthOamCurrentTwoWayFrameDelay
The time requeired to transmit a service frame from source to destination
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.14
pmEthOamCurrentTwoWayFrameDelayVariation
The difference in delay between two service frames
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.15
pmEthOamCurrentFrameLossRatioNearEnd
The number of service frames not delivered divided by the total number of service frames at near end
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.16
pmEthOamCurrentFrameLossRatioFarEnd
The number of service frames not delivered divided by the total number of service frames at far end
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.17
pmEthOamCurrentUnavailabilityNearEnd
The @todo
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.18
pmEthOamCurrentUnavailabilityFarEnd
The @todo
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.19
pmEthOamCurrent24hTwoWayFrameDelay
The time required to transmit a servic frame source to destination
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.20
pmEthOamCurrent24hTwoWayFrameDelayVariation
The difference in delay of two service frames
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.21
pmEthOamCurrent24hFrameLossRatioNearEnd
The number of service frames not delivered divided by the total number of service frames at near end
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.22
pmEthOamCurrent24hFrameLossRatioFarEnd
The number of service frames not delivered divided by the total number of service frames at far end
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.23
pmEthOamCurrent24hUnavailabilityNearEnd
The @todo
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.24
pmEthOamCurrent24hUnavailabilityFarEnd
The @todo
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.25
pmEthOamObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.26
pmEthOamInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.27
pmEthOamIdentifier
Unique identifier for the EVC.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.28
pmEthOamUsedPercentOfFrames
.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.29
pmEthOamFrameLossRatioUnavailableThreshold
.
Unsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.30
pmEthOamCurrentOneWayFrameDelayVariation
The difference in delay between two service frames
during a particular 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.31
pmEthOamCurrent24hOneWayFrameDelayVariation
The difference in delay of two service frames
during a particular 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.12.1.1.32

pmEthDropTable

table
.1.3.6.1.4.1.8708.2.15.2.13.1 · 1 row entry · 74 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthDropTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthDropTable' 
The ethernet drop counters table. Each port has a number of continuous
(free running) drop counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont are set to reset.
pmEthDropEntry row .1.3.6.1.4.1.8708.2.15.2.13.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthDropIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.1
pmEthDropName
The management name of the interface, for
example 'port:1:2:1-2'.
(port:[subrack]:[slot]:[Tx port]-[Rx port]).
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.2
pmEthDropSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.3
pmEthDropSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.4
pmEthDropPort
The number of the Tx port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.5
pmEthDropRxPort
The number of the Rx port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.6
pmEthDropResetCont
Reset the continuous (free running) drop counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.7
pmEthDropFrames
The total number of dropped continuous frames on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.8
pmEthDropBytes
The total number of dropped continuous bytes on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.9
pmEthDropYellowFrames
The total number of dropped continuous yellow frames on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.10
pmEthDropRedFrames
The total number of dropped continuous red frames on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.11
pmEthDropFramesQ1
The number of dropped continuous frames for queue 1 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.12
pmEthDropBytesQ1
The number of dropped continuous bytes for queue 1 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.13
pmEthDropFramesQ2
The number of dropped continuous frames for queue 2 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.14
pmEthDropBytesQ2
The number of dropped continuous bytes for queue 2 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.15
pmEthDropFramesQ3
The number of dropped continuous frames for queue 3 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.16
pmEthDropBytesQ3
The number of dropped continuous bytes for queue 3 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.17
pmEthDropFramesQ4
The number of dropped continuous frames for queue 4 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.18
pmEthDropBytesQ4
The number of dropped continuous bytes for queue 4 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.19
pmEthDropFramesQ5
The number of dropped continuous frames for queue 5 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.20
pmEthDropBytesQ5
The number of dropped continuous bytes for queue 5 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.21
pmEthDropFramesQ6
The number of dropped continuous frames for queue 6 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.22
pmEthDropBytesQ6
The number of dropped continuous bytes for queue 6 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.23
pmEthDropFramesQ7
The number of dropped continuous frames for queue 7 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.24
pmEthDropBytesQ7
The number of dropped continuous bytes for queue 7 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.25
pmEthDropFramesQ8
The number of dropped continuous frames for queue 8 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.26
pmEthDropBytesQ8
The number of dropped continuous bytes for queue 8 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.27
pmEthDropIfNo
The interface number of the port.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.28
pmEthDropUpPortId
Internal port reference for traffic unit.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.29
pmEthDropFrames15m
The number of dropped 15m frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.30
pmEthDropBytes15m
The number of dropped 15m bytes on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.31
pmEthDropYellowFrames15m
The number of dropped 15m yellow frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.32
pmEthDropRedFrames15m
The number of dropped 15m red frames on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.33
pmEthDropFrames24h
The number of dropped 24h frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.34
pmEthDropBytes24h
The number of dropped 24h bytes on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.35
pmEthDropYellowFrames24h
The number of dropped 24h yellow frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.36
pmEthDropRedFrames24h
The number of dropped 24h red frames on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.37
pmEthDropFrames15mQ1
The number of dropped frames for 15m queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.38
pmEthDropBytes15mQ1
The number of dropped bytes for 15m queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.39
pmEthDropFrames24hQ1
The number of dropped frames for 24h queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.40
pmEthDropBytes24hQ1
The number of dropped bytes for 24h queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.41
pmEthDropFrames15mQ2
The number of dropped frames for 15m queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.42
pmEthDropBytes15mQ2
The number of dropped bytes for 15m queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.43
pmEthDropFrames24hQ2
The number of dropped frames for 24h queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.44
pmEthDropBytes24hQ2
The number of dropped bytes for 24h queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.45
pmEthDropFrames15mQ3
The number of dropped frames for 15m queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.46
pmEthDropBytes15mQ3
The number of dropped bytes for 15m queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.47
pmEthDropFrames24hQ3
The number of dropped frames for 24h queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.48
pmEthDropBytes24hQ3
The number of dropped bytes for 24h queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.49
pmEthDropFrames15mQ4
The number of dropped frames for 15m queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.50
pmEthDropBytes15mQ4
The number of dropped bytes for 15m queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.51
pmEthDropFrames24hQ4
The number of dropped frames for 24h queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.52
pmEthDropBytes24hQ4
The number of dropped bytes for 24h queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.53
pmEthDropFrames15mQ5
The number of dropped frames for 15m queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.54
pmEthDropBytes15mQ5
The number of dropped bytes for 15m queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.55
pmEthDropFrames24hQ5
The number of dropped frames for 24h queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.56
pmEthDropBytes24hQ5
The number of dropped bytes for 24h queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.57
pmEthDropFrames15mQ6
The number of dropped frames for 15m queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.58
pmEthDropBytes15mQ6
The number of dropped bytes for 15m queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.59
pmEthDropFrames24hQ6
The number of dropped frames for 24h queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.60
pmEthDropBytes24hQ6
The number of dropped bytes for 24h queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.61
pmEthDropFrames15mQ7
The number of dropped frames for 15m queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.62
pmEthDropBytes15mQ7
The number of dropped bytes for 15m queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.63
pmEthDropFrames24hQ7
The number of dropped frames for 24h queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.64
pmEthDropBytes24hQ7
The number of dropped bytes for 24h queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.65
pmEthDropFrames15mQ8
The number of dropped frames for 15m queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.66
pmEthDropBytes15mQ8
The number of dropped bytes for 15m queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.67
pmEthDropFrames24hQ8
The number of dropped frames for 24h queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.68
pmEthDropBytes24hQ8
The number of dropped bytes for 24h queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.69
pmEthDropReset15m
Reset the 15 minutes drop counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.70
pmEthDropReset24h
Reset the 24 hours drop counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.71
pmEthDropReportMode
The mode for PM reporting to file on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.72
pmEthDropIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.73
pmEthDropIsSuspect24H
This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.13.1.1.74

pmEthClassificationTable

table
.1.3.6.1.4.1.8708.2.15.2.14.1 · 1 row entry · 39 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthClassificationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthClassificationTable' 
The ethernet classification counters table. Each classification has two
continuous (free running) counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont are set to reset.
pmEthClassificationEntry row .1.3.6.1.4.1.8708.2.15.2.14.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthClassificationIndex
An arbitrary index assigned to each classification entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.1
pmEthClassificationName
The management name of the interface, for
example 'class:1:2:id1'.
(class:[subrack]:[slot]:[identifier]).
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.2
pmEthClassificationSubrack
The number of the subrack where the interface is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.3
pmEthClassificationSlot
The number of the slot where the interface is located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.4
pmEthClassificationIdentifier
A unique identifier for the classification.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.5
pmEthClassificationResetCont
Reset the continuous (free running) classification counters.

After a successful reset the default value
(normal) is restored in this action attribute.
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.6
pmEthClassificationInternalReference
For internal use only.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.7
pmEthClassificationCounter1
Number of green and yellow frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.8
pmEthClassificationCounter2
Number of red (not delivered) frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.9
pmEthClassificationCounter3
Number of green and yellow bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.10
pmEthClassificationCounter4
Number of red (not delivered) bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.11
pmEthClassificationFrames
The total number of frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.12
pmEthClassificationBytes
The total number of bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.13
pmEthClassificationBandwidth
The total classification data bandwidth, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.14
pmEthClassificationGreenYellowBandwidth
The data bandwidth of green and yellow bytes, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.15
pmEthClassificationRedBandwidth
The data bandwidth of red bytes, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.16
pmEthClassificationReportMode
The mode for PM reporting to file on the classifier.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.17
pmEthClassificationIsSuspect15Min
This variable indicates if the data for this
classifier is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.18
pmEthClassificationIsSuspect24h
This variable indicates if the data for this
classifier is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.19
pmEthClassificationReset15m
Reset the 15 minutes classification counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.20
pmEthClassificationReset24h
Reset the 24 hours classification counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.21
pmEthClassificationFrames15m
The total number of 15m frames in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.22
pmEthClassificationGreenYellowFrames15m
The number of 15m green and yellow frames in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.23
pmEthClassificationRedFrames15m
The number of 15m red (not delivered) frames in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.24
pmEthClassificationBytes15m
The total number of 15m bytes in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.25
pmEthClassificationGreenYellowBytes15m
The number of 15m green and yellow bytes in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.26
pmEthClassificationRedBytes15m
The number of 15m red (not delivered) bytes in the classification.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.27
pmEthClassificationFrames24h
The total number of 24h frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.28
pmEthClassificationGreenYellowFrames24h
The number of 24h green and yellow frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.29
pmEthClassificationRedFrames24h
The number of 24h red (not delivered) frames in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.30
pmEthClassificationBytes24h
The total number of 24h bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.31
pmEthClassificationGreenYellowBytes24h
The number of 24h green and yellow bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.32
pmEthClassificationRedBytes24h
The number of 24h red (not delivered) bytes in the classification.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.33
pmEthClassificationMaxBandwidth15m
The maximum total classification data bandwidth during a particular 15 minute interval, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.34
pmEthClassificationGreenYellowMaxBandwidth15m
The green and yellow bandwidth when 'Max bandwidth 15m' for this classification was captured, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.35
pmEthClassificationRedMaxBandwidth15m
The red bandwidth when 'Max bandwidth 15m' for this classification was captured, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.36
pmEthClassificationMaxBandwidth24h
The maximum total classification data bandwidth during a particular 24 hour interval, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.37
pmEthClassificationGreenYellowMaxBandwidth24h
The green and yellow bandwidth when 'Max bandwidth 24h' for this classification was captured, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.38
pmEthClassificationRedMaxBandwidth24h
The red bandwidth when 'Max bandwidth 24h' for this classification was captured, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.14.1.1.39

pmMpoLanesTable

table
.1.3.6.1.4.1.8708.2.15.2.15.1 · 1 row entry · 65 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmMpoLanesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmMpoLanesTable' 
The pm interface table.
pmMpoLanesEntry row .1.3.6.1.4.1.8708.2.15.2.15.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmMpoLanesIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.1
pmMpoLanesName
The management name of the interface, for
example 'mrt:1:2:1-2'.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.2
pmMpoLanesSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.3
pmMpoLanesSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.4
pmMpoLanesLaneId
The id of the lane within.
Unsigned32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.5
pmMpoLanesAdminStatus
Administrative state for the PM object.

down - Alarms are not sent.

up - Alarms are sent

service - Alarms are not sent
LUM-TCBoardOrInterfaceAdminStatusr/w
Type Values:
1down
2service
3up
Description:
The administrative state for a board or
interface.

down - The board/interface should be inactive.

service - The board/interface is activated but
alarms are suppressed. Intended for use during
servi…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.6
pmMpoLanesOperStatus
The operational state for the PM object.

notPresent - The physical resource is not available.

down - The object is disabled.

up - The object is enabled.
LUM-TCBoardOrInterfaceOperStatus
Type Values:
1notPresent
2down
3up
Description:
The operational state for a board or interface.

notPresent - The board/interface is not available.

down - The board/interface is de-activated or
there are faults preventing it from going to the
'up…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.7
pmMpoLanesPmReportMode
The mode PM reporting on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
LUM-TCOnOffr/w
Type Values:
1off
2on
2147483646notAvailable
2147483647notApplicable
Description:
The configured laser mode.
notApplicable - used to tell that attribute
is not used in current configuration.
notAvailable - used to tell that it is not
possible to read attribute at the moment.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.8
pmMpoLanesIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.9
pmMpoLanesIsSuspect24H
This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.10
pmMpoLanesRxCurrentES
The counter associated with the number of
Errored Seconds in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.11
pmMpoLanesRxCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.12
pmMpoLanesRxCurrentBBE
The counter associated with the number of
Background Block Errors in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.13
pmMpoLanesRxCurrentUAS
The counter associated with the number of
Unavailable Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.14
pmMpoLanesTxCurrentES
The counter associated with the number of
Errored Seconds in the current 15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.15
pmMpoLanesTxCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 15 minute
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.16
pmMpoLanesTxCurrentBBE
The counter associated with the number of
Background Block Errors in in the current
15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.17
pmMpoLanesTxCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
15 minute interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.18
pmMpoLanesRx24hCurrentES
The counter associated with the number of
Errored Seconds in the current 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.19
pmMpoLanesRx24hCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.20
pmMpoLanesRx24hCurrentBBE
The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.21
pmMpoLanesRx24hCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.22
pmMpoLanesTx24hCurrentES
The counter associated with the number of
Errored Seconds in the current 24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.23
pmMpoLanesTx24hCurrentSES
The counter associated with the number of
Severely Errored Seconds in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.24
pmMpoLanesTx24hCurrentBBE
The counter associated with the number of
Background Block Errors in the current 24 hour
interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.25
pmMpoLanesTx24hCurrentUAS
The counter associated with the number of
Unavailable Seconds encountered in the current
24 hour interval.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.26
pmMpoLanesRxESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.27
pmMpoLanesRxSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.28
pmMpoLanesRxBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.29
pmMpoLanesRxUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.30
pmMpoLanesTxESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.31
pmMpoLanesTxSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.32
pmMpoLanesTxBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.33
pmMpoLanesTxUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-900
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.34
pmMpoLanesRx24hESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.35
pmMpoLanesRx24hSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.36
pmMpoLanesRx24hBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.37
pmMpoLanesRx24hUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.38
pmMpoLanesTx24hESThreshold
Sets the threshold in seconds for the
errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.39
pmMpoLanesTx24hSESThreshold
Sets the threshold in seconds for the
severely errored seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.40
pmMpoLanesTx24hBBEThreshold
Sets the threshold in seconds for the
background block errors alarms.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.41
pmMpoLanesTx24hUASThreshold
Sets the threshold in seconds for the
unavailable seconds alarm.
Unsigned32r/w
Constraints:
range: 0-86400
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.42
pmMpoLanesRxES
Errored seconds (ES) Rx 15 min threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
associate…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.43
pmMpoLanesRxSES
Severely errored seconds (SES) Rx 15 min
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 15 minute p…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.44
pmMpoLanesRxBBE
Background block errors (BBE) Rx 15 min
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 15 minute per…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.45
pmMpoLanesRxUAS
Unavailable seconds (UAS) Rx 15 min threshold
exceeded.

A: The number of unavailable seconds during a
period exceeds the associated threshold.

D: At the start of a new 15 minute period the
…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.46
pmMpoLanesTxES
Errored seconds (ES) Tx 15 min threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
associate…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.47
pmMpoLanesTxSES
Severely errored seconds (SES) Tx 15 min
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 15 minute p…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.48
pmMpoLanesTxBBE
Background block errors (BBE) Tx 15 min
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 15 minute per…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.49
pmMpoLanesTxUAS
Unavailable seconds (UAS) Tx 15 min threshold
exceeded.

A: The number of unavailable seconds during a period
exceeds the associated threshold.

D: At the start of a new 15 minute period the
…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.50
pmMpoLanesRx24hES
Errored seconds (ES) Rx 24 hour threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.51
pmMpoLanesRx24hSES
Severely errored seconds (SES) Rx 24 hour
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 24 hour pe…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.52
pmMpoLanesRx24hBBE
Background block errors (BBE) Rx 24 hour
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 24 hour peri…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.53
pmMpoLanesRx24hUAS
Unavailable seconds (UAS) Rx 24 hour threshold
exceeded.

A: The number of unavailable seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
a…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.54
pmMpoLanesTx24hES
Errored seconds Tx (ES) 24 hour threshold
exceeded.

A: The number of errored seconds during a period
exceeds the associated threshold.

D: At the start of a new 24 hour period the
associated…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.55
pmMpoLanesTx24hSES
Severely errored seconds (SES) Tx 24 hour
threshold exceeded.

A: The number of severely errored seconds during
a period exceeds the associated threshold.

D: At the start of a new 24 hour pe…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.56
pmMpoLanesTx24hBBE
Background block errors (BBE) Tx 24 hour
threshold exceeded.

A: The number of background block errors
during a period exceeds the associated threshold.

D: At the start of a new 24 hour peri…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.57
pmMpoLanesTx24hUAS
Unavailable seconds (UAS) Tx 24 hour threshold
exceeded.

A: The number of unavailable seconds during a
period exceeds the associated threshold.

D: At the start of a new 24 hour period the
a…
LUM-TCFaultStatus
Type Values:
1ok
2alarm
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.58
pmMpoLanesReset15Min
Reset the 15 minute PM counters for the
interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.59
pmMpoLanesReset24H
Reset the 24 hour PM counters for the interface.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24h reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.60
pmMpoLanesRxPowerLevel
The received power level in units of 0.1 dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.61
pmMpoLanesTxPowerLevel
The transmitted power level in units of 0.1 dBm
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.62
pmMpoLanesObjectProperty
Property mask.
LUM-TCObjectProperty
Type Constraints:
range: 0..4294967295
Description:
A bitmask of length 32 encoding certain properties
of an object.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.63
pmMpoLanesIfNo
The interface number of the port.
LUM-TCPortNumberr/w
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.64
pmMpoLanesUpPortId
Internal port reference for traffic unit.
Integer32r/w
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.15.1.1.65

pmEthEgressTable

table
.1.3.6.1.4.1.8708.2.15.2.16.1 · 1 row entry · 70 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk pmEthEgressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-PM-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-PM-MIB::pmEthEgressTable' 
The ethernet egress counters table. Each port has a number of continuous
(free running) counters. The counters are reset when the traffic
unit reboots or when the attribute resetCont, reset15m or reset24h are set to reset.
pmEthEgressEntry row .1.3.6.1.4.1.8708.2.15.2.16.1.1
An entry in interface table.
Indexes
Column Syntax OID
pmEthEgressIndex
An arbitrary index assigned to each if entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.1
pmEthEgressName
The management name of the interface, for
example 'port:1:2:1-2'.
(port:[subrack]:[slot]:[Tx port]-[Rx port]).
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.2
pmEthEgressSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Type Constraints:
range: 0..15
Description:
The number of a subrack within a network element.

0 signifies an undefined subrack number.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.3
pmEthEgressSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Type Constraints:
range: 0..22
Description:
The number of a slot within a subrack.

0 signifies an undefined slot number.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.4
pmEthEgressIfNo
The interface number of the port.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.5
pmEthEgressPort
The number of the Tx port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.6
pmEthEgressRxPort
The number of the Rx port for the interface.
LUM-TCPortNumber
Type Constraints:
range: 0..116
Description:
The number of a port on a board.
If an interface has two numbers, the lowest number is used.

0 signifies an undefined port number.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.7
pmEthEgressUpPortId
Internal port reference for traffic unit.
Integer32
Constraints:
range: -1-2147483647
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.8
pmEthEgressResetCont
Reset the continuous (free running) egress counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set resetCont reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.9
pmEthEgressReset15m
Reset the 15m egress counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset15m reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.10
pmEthEgressReset24h
Reset the 24h egress counters.

After a successful reset the default value
(normal) is restored in this action attribute.

Usage: set reset24hm reset
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.11
pmEthEgressFramesQ1
The number of continuous egress frames for queue 1 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.12
pmEthEgressBytesQ1
The number of continuous egress bytes for queue 1 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.13
pmEthEgressBandwidthQ1
The data rate bandwidth for queue 1 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.14
pmEthEgressFrames15mQ1
The number of 15m egress frames for queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.15
pmEthEgressBytes15mQ1
The number of 15m egress bytes for queue 1 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.16
pmEthEgressFrames24hQ1
The number of 24h egress frames for queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.17
pmEthEgressBytes24hQ1
The number of 24h egress bytes for queue 1 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.18
pmEthEgressFramesQ2
The number of continuous egress frames for queue 2 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.19
pmEthEgressBytesQ2
The number of continuous egress bytes for queue 2 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.20
pmEthEgressBandwidthQ2
The data rate bandwidth for queue 2 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.21
pmEthEgressFrames15mQ2
The number of 15m egress frames for queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.22
pmEthEgressBytes15mQ2
The number of 15m egress bytes for queue 2 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.23
pmEthEgressFrames24hQ2
The number of 24h egress frames for queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.24
pmEthEgressBytes24hQ2
The number of 24h egress bytes for queue 2 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.25
pmEthEgressFramesQ3
The number of continuous egress frames for queue 3 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.26
pmEthEgressBytesQ3
The number of continuous egress bytes for queue 3 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.27
pmEthEgressBandwidthQ3
The data rate bandwidth for queue 3 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.28
pmEthEgressFrames15mQ3
The number of 15m egress frames for queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.29
pmEthEgressBytes15mQ3
The number of 15m egress bytes for queue 3 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.30
pmEthEgressFrames24hQ3
The number of 24h egress frames for queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.31
pmEthEgressBytes24hQ3
The number of 24h egress bytes for queue 3 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.32
pmEthEgressFramesQ4
The number of continuous egress frames for queue 4 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.33
pmEthEgressBytesQ4
The number of continuous egress bytes for queue 4 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.34
pmEthEgressBandwidthQ4
The data rate bandwidth for queue 4 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.35
pmEthEgressFrames15mQ4
The number of 15m egress frames for queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.36
pmEthEgressBytes15mQ4
The number of 15m egress bytes for queue 4 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.37
pmEthEgressFrames24hQ4
The number of 24h egress frames for queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.38
pmEthEgressBytes24hQ4
The number of 24h egress bytes for queue 4 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.39
pmEthEgressFramesQ5
The number of continuous egress frames for queue 5 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.40
pmEthEgressBytesQ5
The number of continuous egress bytes for queue 5 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.41
pmEthEgressBandwidthQ5
The data rate bandwidth for queue 5 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.42
pmEthEgressFrames15mQ5
The number of 15m egress frames for queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.43
pmEthEgressBytes15mQ5
The number of 15m egress bytes for queue 5 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.44
pmEthEgressFrames24hQ5
The number of 24h egress frames for queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.45
pmEthEgressBytes24hQ5
The number of 24h egress bytes for queue 5 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.46
pmEthEgressFramesQ6
The number of continuous egress frames for queue 6 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.47
pmEthEgressBytesQ6
The number of continuous egress bytes for queue 6 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.48
pmEthEgressBandwidthQ6
The data rate bandwidth for queue 6 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.49
pmEthEgressFrames15mQ6
The number of 15m egress frames for queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.50
pmEthEgressBytes15mQ6
The number of 15m egress bytes for queue 6 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.51
pmEthEgressFrames24hQ6
The number of 24h egress frames for queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.52
pmEthEgressBytes24hQ6
The number of 24h egress bytes for queue 6 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.53
pmEthEgressFramesQ7
The number of continuous egress frames for queue 7 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.54
pmEthEgressBytesQ7
The number of continuous egress bytes for queue 7 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.55
pmEthEgressBandwidthQ7
The data rate bandwidth for queue 7 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.56
pmEthEgressFrames15mQ7
The number of 15m egress frames for queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.57
pmEthEgressBytes15mQ7
The number of 15m egress bytes for queue 7 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.58
pmEthEgressFrames24hQ7
The number of 24h egress frames for queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.59
pmEthEgressBytes24hQ7
The number of 24h egress bytes for queue 7 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.60
pmEthEgressFramesQ8
The number of continuous egress frames for queue 8 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.61
pmEthEgressBytesQ8
The number of continuous egress bytes for queue 8 on the port.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.62
pmEthEgressBandwidthQ8
The data rate bandwidth for queue 8 on the port, in kbps.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.63
pmEthEgressFrames15mQ8
The number of 15m egress frames for queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.64
pmEthEgressBytes15mQ8
The number of 15m egress bytes for queue 8 on the port.
The 15m period is fixed, a new period is started four times every hour: 00m, 15m, 30m, and 45m.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.65
pmEthEgressFrames24hQ8
The number of 24h egress frames for queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.66
pmEthEgressBytes24hQ8
The number of 24h egress bytes for queue 8 on the port.
The 24h period is fixed, a new period starts at midnight, 12:00 a.m., 00.00.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.67
pmEthEgressReportMode
The mode for PM reporting to file on the interface.

off - PM reporting is inactive.

on - PM reporting is activated.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.68
pmEthEgressIsSuspect15Min
This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.69
pmEthEgressIsSuspect24H
This variable indicates if the data for this
interface is suspect. The current interval may
for example only contain measurements for a part of
the interval.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.8708.2.15.2.16.1.1.70