pmEthTdSlot
LUM-PM-MIB ·
.1.3.6.1.4.1.8708.2.15.2.10.1.1.4
Object
The number of the slot where the interface is located.
Context
- MIB
- LUM-PM-MIB
- OID
.1.3.6.1.4.1.8708.2.15.2.10.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- pmEthTdEntry
- Table
- pmEthTdTable
- Siblings
- 86
Values & Constraints
Type Constraints
range: 0..22
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pmEthTdIndex An arbitrary index assigned to each if entry.
The index is read-only and persistent, i.e the index
is kept over reboot and backed up by stable storage. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.1 |
| pmEthTdAdminStatus Administrative state for the PM object.
down - Alarms are not sent.
up - Alarms are sent
service - Alarms are not sent | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.10 |
| pmEthTdOperStatus The operational state for the PM object.
notPresent - The physical resource is not available.
down - The object is disabled.
up - The … | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.11 |
| pmEthTdIsSuspect15Min This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.15.2.10.1.1.12 |
| pmEthTdIsSuspect24h This variable indicates if the data for this
interface is suspect. The current interval may
for example contain measurements for a part of
the interval. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.8708.2.15.2.10.1.1.13 |
| pmEthTdCurrentRxUndersizedFrames The amount of undersized frames
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.14 |
| pmEthTdCurrentRxOversizedFrames The amount of oversized frames
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.15 |
| pmEthTdCurrentRxFragments The amount of fragments
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.16 |
| pmEthTdCurrentRxFcsErrors The amount of frames with FCS or alignment errors
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.17 |
| pmEthTdCurrentRxInvalidCeVlanId The amount of frames with invalid CE-VLAN id
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.18 |
| pmEthTdCurrentTxOctets The amount of octets transmitted OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.19 |
| pmEthTdName The management name of the interface, for
example 'mrt:1:2:1-2'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.15.2.10.1.1.2 |
| pmEthTdCurrentTxFrames The amount of frames transmitted OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.20 |
| pmEthTdCurrentTxUnicastFrames The amount of unicast frames transmitted OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.21 |
| pmEthTdCurrentTxMulticastFrames The amount of multicast frames transmitted OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.22 |
| pmEthTdCurrentTxBroadcastFrames The amount of broadcast frames transmitted OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.23 |
| pmEthTdCurrentRxOctets The amount of octets received OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.24 |
| pmEthTdCurrentRxFrames The amount of frames received OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.25 |
| pmEthTdCurrentRxUnicastFrames The amount of unicast frames received OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.26 |
| pmEthTdCurrentRxMulticastFrames The amount of multicast frames received OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.27 |
| pmEthTdCurrentRxBroadcastFrames The amount of broadcast frames received OK
during a particular 15 minute interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.28 |
| pmEthTdCurrent24hRxUndersizedFrames The amount of undersized frames
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.29 |
| pmEthTdSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.15.2.10.1.1.3 |
| pmEthTdCurrent24hRxOversizedFrames The amount of oversized frames
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.30 |
| pmEthTdCurrent24hRxFragments The amount of fragments
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.31 |
| pmEthTdCurrent24hRxFcsErrors The amount of frames with FCS or alignment errors
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.32 |
| pmEthTdCurrent24hRxInvalidCeVlanId The amount of frames with invalid CE-VLAN id
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.33 |
| pmEthTdCurrent24hTxOctets The amount of octets transmitted OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.34 |
| pmEthTdCurrent24hTxFrames The amount of frames transmitted OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.35 |
| pmEthTdCurrent24hTxUnicastFrames The amount of unicast frames transmitted OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.36 |
| pmEthTdCurrent24hTxMulticastFrames The amount of multicast frames transmitted OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.37 |
| pmEthTdCurrent24hTxBroadcastFrames The amount of broadcast frames transmitted OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.38 |
| pmEthTdCurrent24hRxOctets The amount of octets received OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.39 |
| pmEthTdCurrent24hRxFrames The amount of frames received OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.40 |
| pmEthTdCurrent24hRxUnicastFrames The amount of unicast frames received OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.41 |
| pmEthTdCurrent24hRxMulticastFrames The amount of multicast frames received OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.42 |
| pmEthTdCurrent24hRxBroadcastFrames The amount of broadcast frames received OK
during a particular 24 hour interval. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.43 |
| pmEthTdObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.15.2.10.1.1.44 |
| pmEthTdRxUndersizedFramesThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.45 |
| pmEthTdRxOversizedFramesThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.46 |
| pmEthTdRxFragmentsThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.47 |
| pmEthTdRxFcsErrorsThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.48 |
| pmEthTdRxInvalidCeVlanIdThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10
A value of 0 (zero) will disable the alarm. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.49 |
| pmEthTdPort The number of the Tx port for the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.15.2.10.1.1.5 |
| pmEthTd24hRxUndersizedFramesThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.50 |
| pmEthTd24hRxOversizedFramesThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.51 |
| pmEthTd24hRxFragmentsThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.52 |
| pmEthTd24hRxFcsErrorsThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10 | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.53 |
| pmEthTd24hRxInvalidCeVlanIdThreshold Sets the threshold for the alarm,
(in no. of frames).
Default value 10
A value of 0 (zero) will disable the alarm. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.54 |
| pmEthTdRxUndersizedFrames Rx undersized frames threshold exceeded.
A: The number of undersized frames during a
period exceeds the associated threshold.
D: At the start of a ne… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.55 |
| pmEthTdRxOversizedFrames Rx oversized frames threshold exceeded.
A: The number of oversized frames during a
period exceeds the associated threshold.
D: At the start of a new … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.56 |
| pmEthTdRxFragments Rx fragments threshold exceeded.
A: The number of fragmented frames during a
period exceeds the associated threshold.
D: At the start of a new 15 min… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.57 |
| pmEthTdRxFcsErrors Rx FCS errors threshold exceeded.
A: The number of FCS or alignment errors during a
period exceeds the associated threshold.
D: At the start of a new… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.58 |
| pmEthTdRxInvalidCeVlanId Rx invalid CE VLAN id threshold exceeded.
A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.
D: At the start of a … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.59 |
| pmEthTdPmReportMode The mode PM reporting on the interface.
off - PM reporting is inactive.
on - PM reporting is activated. | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.6 |
| pmEthTd24hRxUndersizedFrames Rx undersized frames 24h threshold exceeded.
A: The number of undersized frames during a
period exceeds the associated threshold.
D: At the start of … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.60 |
| pmEthTd24hRxOversizedFrames Rx oversized frames 24h threshold exceeded.
A: The number of oversized frames during a
period exceeds the associated threshold.
D: At the start of a … | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.61 |
| pmEthTd24hRxFragments Rx fragments 24h threshold exceeded.
A: The number of fragmented frames during a
period exceeds the associated threshold.
D: At the start of a new 24… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.62 |
| pmEthTd24hRxFcsErrors Rx FCS errors 24h threshold exceeded.
A: The number of FCS or alignment errors during a
period exceeds the associated threshold.
D: At the start of a… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.63 |
| pmEthTd24hRxInvalidCeVlanId Rx invalid CE VLAN id 24h threshold exceeded.
A: The number of invalid CE VLAN id during a
period exceeds the associated threshold.
D: At the start o… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.15.2.10.1.1.64 |
| pmEthTdCurrentTxEthMaxUtilization The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.65 |
| pmEthTdCurrentRxEthMaxUtilization The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 15 min
interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.66 |
| pmEthTdCurrent24hTxEthMaxUtilization The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.67 |
| pmEthTdCurrent24hRxEthMaxUtilization The maximum layer 2 bandwidth utilization of the
ethernet signal during the current 24 h
interval. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.68 |
| pmEthTdResetCont Reset the free running PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage… | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.69 |
| pmEthTdRxPort The number of the Rx port for the interface. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.15.2.10.1.1.7 |
| pmEthTdCurrentContRxUndersizedFrames The amount of undersized frames. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.70 |
| pmEthTdCurrentContRxOversizedFrames The amount of oversized frames. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.71 |
| pmEthTdCurrentContRxFragments The amount of fragments. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.72 |
| pmEthTdCurrentContRxFcsErrors The amount of frames with FCS or alignment errors.
Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.73 |
| pmEthTdCurrentContRxInvalidCeVlanId The amount of frames with invalid CE-VLAN id.
Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.74 |
| pmEthTdCurrentContTxOctets The amount of octets transmitted OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.75 |
| pmEthTdCurrentContTxFrames The amount of frames transmitted OK. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.76 |
| pmEthTdCurrentContTxUnicastFrames The amount of unicast frames transmitted OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.77 |
| pmEthTdCurrentContTxMulticastFrames The amount of multicast frames transmitted OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.78 |
| pmEthTdCurrentContTxBroadcastFrames The amount of broadcast frames transmitted OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.79 |
| pmEthTdReset15Min Reset the 15 minute PM counters for the
interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: s… | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.8 |
| pmEthTdCurrentContRxOctets The amount of octets received OK. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.80 |
| pmEthTdCurrentContRxFrames The amount of frames received OK. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.81 |
| pmEthTdCurrentContRxUnicastFrames The amount of unicast frames received OK. Free running counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.82 |
| pmEthTdCurrentContRxMulticastFrames The amount of multicast frames received OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.83 |
| pmEthTdCurrentContRxBroadcastFrames The amount of broadcast frames received OK. Free running
counter. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.84 |
| pmEthTdVlanId User specified VLAN ID, which is last number in the
port device ID.
If no VLAN ID is specified then VLAN ID -1 is assumed. | column | Integer32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.85 |
| pmEthTdIfNo The interface number of the port. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.15.2.10.1.1.86 |
| pmEthTdUpPortId Internal port reference for traffic unit. | column | Integer32 | .1.3.6.1.4.1.8708.2.15.2.10.1.1.87 |
| pmEthTdReset24H Reset the 24 hour PM counters for the interface.
After a successful reset the default value
(normal) is restored in this action attribute.
Usage: set… | column | Enumeration | .1.3.6.1.4.1.8708.2.15.2.10.1.1.9 |