JUNIPER-ATM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
68

jnxAtmIfTable

table
.1.3.6.1.4.1.2636.3.10.1 · 1 row entry · 20 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxAtmIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-MIB::jnxAtmIfTable' 
This table contains config and stats parameters, one entry per
physical interface (ATM port).
jnxAtmIfEntry row .1.3.6.1.4.1.2636.3.10.1.1
This entry contains additional ATM interface config and stats
objects, not covered in standard mibs. Each entry is an extension
of atmInterfaceConfEntry defined in ATM-MIB.
Indexes
No indexes recorded
Column Syntax OID
jnxAtmIfPortType
The physical port type.
Enumeration
Enumerated Values:
1other
2oc3
3oc12
4t3
5e3
6oc48
 .1.3.6.1.4.1.2636.3.10.1.1.1
jnxAtmIfEncaps
ATM physical link layer encapsulation.
Enumeration
Enumerated Values:
1other
2atmPvc
3atmCccCellRelay
 .1.3.6.1.4.1.2636.3.10.1.1.2
jnxAtmIfLpBackInfo
Loop back config and type.
Enumeration
Enumerated Values:
1noLoopBack
2localLoopBack
3remoteLoopBack
 .1.3.6.1.4.1.2636.3.10.1.1.3
jnxAtmIfScrambleEnable
Shows whether scrambling is enabled or disabled
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.2636.3.10.1.1.4
jnxAtmIfTxCellCount
The number of ATM cells transmitted by the interface.
Includes Idle cells transmitted.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.5
jnxAtmIfRxCellCount
The number of ATM cells received by the interface.
Excludes Idle cells received.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.6
jnxAtmIfTxIdleCellCount
The number of idle cells sent by the port. When the ATM interface
has nothing to send, it sends idle cells to fill the time slot.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.7
jnxAtmIfUncorrHCSErrs
The number of uncorrectable cell Header Check Sequence (HCS) Errors
that occurred.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.8
jnxAtmIfCorrHCSErrs
The number of correctable cell Header Check Sequence (HCS) Errors
that occurred.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.9
jnxAtmIfTxCellFIFOOverRuns
The number of overruns in the Transmit FIFO.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.10
jnxAtmIfRxCellFIFOOverRuns
The number of overruns in the Receive FIFO.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.11
jnxAtmIfRxCellFIFOUnderRuns
The number of underruns in the receive FIFO.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.12
jnxAtmIfInInvalidVCCells
The number of Cells that arrived for non existent VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.13
jnxAtmIfInNoBufferOAMCells
The number of received OAM cells or raw cells dropped because
no buffers were available to handle them.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.14
jnxAtmIfInNoBufDropPkts
The number of AAL5 packets dropped because there was no enough
buffer to handle them.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.15
jnxAtmIfOutVCQueueDrops
The number of packets dropped because of queue limits on each VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.16
jnxAtmIfInBadCrcs
The total number of incoming CRC errors.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.17
jnxAtmIfInLenErrPkts
The number of AAL5 packets dropped because their length was incorrect.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.18
jnxAtmIfInTimeoutPkts
The number of AAL5 packets dropped because of reassembly timeout.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.1.1.19
jnxAtmIfL2CircuitMode
The layer 2 circuit mode of this Atm interface. Note, this
applies only to interfaces on AtmII pics.
Enumeration
Enumerated Values:
1notApplicable
2none
3aal5
4cell
5uniTrunk
6nniTrunk
 .1.3.6.1.4.1.2636.3.10.1.1.20

jnxAtmVCTable

table
.1.3.6.1.4.1.2636.3.10.2 · 1 row entry · 20 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxAtmVCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-MIB::jnxAtmVCTable' 
A table of all p2p/p2mp/multicast VC entries.
jnxAtmVCEntry row .1.3.6.1.4.1.2636.3.10.2.1
Special Cases:
- No traffic Stats for multicast VCs. (0 by default).
- Multipoint Destination IP Address for a p2p vc is
invalid (0.0.0.0 by default).
- When the encapsulation type for the logical interface
(to w…
Indexes
No indexes recorded
Column Syntax OID
jnxAtmVCConnType
The type of connection. The type 'other' means vc type is unknown
or is not one of the other types.
Enumeration
Enumerated Values:
1other
2p2p
3p2mp
4multicast
 .1.3.6.1.4.1.2636.3.10.2.1.1
jnxAtmVCEncapsulation
The atm encapsulation type associated with the VC.
atmCccCellRelay : ATM Cell Relay for CCC
atmCccVcMux : ATM VC for CCC
atmCiscoNlpid : Cisco-compatible ATM NLPID encapsulation
atmNlpid : ATM NLPID encaps…
Enumeration
Enumerated Values:
1other
2atmCccCellRelay
3atmCccVcMux
4atmCiscoNlpid
5atmNlpid
6atmSnap
7atmVcMux
8atmTccVcMux
9atmTccSnap
 .1.3.6.1.4.1.2636.3.10.2.1.2
jnxAtmVCMpDestIPv4Addr
This object is meaningful only if jnxAtmVCConnType value is
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
destination IPv4 address. When the VC connection type is other
than p2mp OR when the multi…
INET-ADDRESS-MIBInetAddressIPv4
Type Constraints:
range: 4
 .1.3.6.1.4.1.2636.3.10.2.1.3
jnxAtmVCMpDestIPv6Addr
This object is meaningful only if jnxAtmVCConnType value is
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
destination IPv6 address. When the VC connection type is other
than p2mp OR when the multi…
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.2636.3.10.2.1.4
jnxAtmVCFlags
Flags related to the VC.
JnxAtmFlags
Type Values:
0inverseArpEnabled
1ilmiEnabled
2oamEnabled
3shapingEnabled
4passiveOam
5multicast
6closed
7down
8active
9cosEnabled
 .1.3.6.1.4.1.2636.3.10.2.1.5
jnxAtmVCTotalDownTime
The total VC down time in seconds ever since the system rebooted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.2.1.6
jnxAtmVCInBytes
The number of bytes received on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.2.1.7
jnxAtmVCOutBytes
The number of bytes sent out on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.2.1.8
jnxAtmVCInPkts
The number of packets received on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.2.1.9
jnxAtmVCOutPkts
The number of packets sent out on the VC.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.2.1.10
jnxAtmVCTailQueuePktDrops
The number of packets dropped due to bandwidth constraints.
Indicates that packets were queued to send out at a rate faster
than allowed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.2.1.11
jnxAtmVCOAMPeriod
This time interval indicates how often the F5 cells are sent to
know the status of the VC.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.2.1.12
jnxAtmVCOAMUpCellCount
The minimum number of loopback cells to be received to declare
that the VC is up.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.2.1.13
jnxAtmVCOAMDownCellCount
The minimum number of loopback cells to be received to declare
that the VC is down. This object would have zero value if OAM is
not enabled. (indicated in jnxAtmVCFlags)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.2.1.14
jnxAtmVCInOAMF5LoopCells
The number of OAM F5 loopback cells received. This object would
have zero value if OAM (as indicated in jnxAtmVCFlags) is not
enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.15
jnxAtmVCOutOAMF5LoopCells
The number of OAM F5 loopback cells sent. This object would have
zero value if OAM (as indicated in jnxAtmVCFlags) is not
enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.16
jnxAtmVCInOAMF5RDICells
The number of OAM F5 cells received, with RDI(Remote Defect
Indication) bit set. This object would have zero value if OAM
(as indicated in jnxAtmVCFlags) is not enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.17
jnxAtmVCOutOAMF5RDICells
The number of OAM F5 cells transmitted, with RDI(Remote Defect
Indication) bit set. This object would have zero value if OAM
(as indicated in jnxAtmVCFlags) is not enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.18
jnxAtmVCInOAMF5AISCells
The number of OAM F5 cells received, with AIS(Alarm Indication
Signal) bit set. This object would have zero value if OAM (as
indicated in jnxAtmVCFlags) is not enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.19
jnxAtmVCOutOAMF5AISCells
The number of OAM F5 cells transmitted, with AIS (Alarm
Indication Signal) bit set. This object would have zero
value if OAM (as indicated in jnxAtmVCFlags) is not
enabled.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.2.1.20

jnxAtmVpTable

table
.1.3.6.1.4.1.2636.3.10.3 · 1 row entry · 16 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxAtmVpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-MIB::jnxAtmVpTable' 
The table of ATM VPs. This table augments atmVplTable
defined in standard ATM mib.
jnxAtmVpEntry row .1.3.6.1.4.1.2636.3.10.3.1
Each entry represents config, status and statistics info related
to an ATM VP configured. This entry augments the atmVplEntry
defined in standard ATM mib (RFC 2515). So ifIndex and VPI are the
indices to this table.
…
Indexes
No indexes recorded
Column Syntax OID
jnxAtmVpFlags
The flags associated with this VP.
Bits
Enumerated Values:
0active
1down
2oamEnabled
3shapingEnabled
4passiveOam
 .1.3.6.1.4.1.2636.3.10.3.1.1
jnxAtmVpTotalDownTime
The total VP downtime in seconds, ever since the system rebooted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.3.1.2
jnxAtmVpOamPeriod
This time interval indicates how often the OAM F4 cells are sent
to determine the status of the VP. The value of this object is zero
when OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used
to determine if …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.3.1.3
jnxAtmVpOamUpCellCount
The minimum number of consecutive loopback cells to be received to
declare that the VP is up. The value of this object is zero when
OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
determine if OAM is…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.3.1.4
jnxAtmVpOamDownCellCount
The minimum number of consecutive loopback cells to be received to
declare that the VP is down. The value of this object is zero when
OAM is not enabled on the VP. Object 'jnxAtmVpFlags' can be used to
determine if OAM …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.3.1.5
jnxAtmVpInBytes
The number of bytes received on the VP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.3.1.6
jnxAtmVpOutBytes
The number of bytes sent out on the VP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.3.1.7
jnxAtmVpInPkts
The number of packets received on the VP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.3.1.8
jnxAtmVpOutPkts
The number of packets sent out on the VP.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.3.1.9
jnxAtmVpInOamF4Cells
The number of OAM F4 cells received on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.10
jnxAtmVpOutOamF4Cells
The number of OAM F4 cells transmitted on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.11
jnxAtmVpInOamF4LoopCells
The number of OAM F4 loopback cells received on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.12
jnxAtmVpOutOamF4LoopCells
The number of OAM F4 cells transmitted on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.13
jnxAtmVpInOamF4RdiCells
The number of OAM F4 RDI cells received on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.14
jnxAtmVpOutOamF4RdiCells
The number of OAM F4 RDI cells transmitted on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.15
jnxAtmVpInOamF4AisCells
The number of OAM F4 AIS cells received on the VP.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.3.1.16

jnxAtmTrunkTable

table
.1.3.6.1.4.1.2636.3.10.4 · 1 row entry · 12 columns
Open in standard view
Uses the juniper variant from /opt/observium/mibs/juniper.
Command help
Walk jnxAtmTrunkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'JUNIPER-ATM-MIB' -M '/opt/observium/mibs/juniper:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'JUNIPER-ATM-MIB::jnxAtmTrunkTable' 
A table of all ATM Trunk entries.
jnxAtmTrunkEntry row .1.3.6.1.4.1.2636.3.10.4.1
Special Cases:
- When the encapsulation type for the logical interface
(to which Trunk belongs) is 'atmCccCellRelay', only
Generic Trunk Info is valid.
Indexes
Column Syntax OID
jnxAtmTrunkId
The identifier for this ATM Trunk.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.4.1.1
jnxAtmTrunkConnType
The type of connection. The type 'other' means trunk type is
unknown or is not one of the other types.
Enumeration
Enumerated Values:
1other
2p2p
 .1.3.6.1.4.1.2636.3.10.4.1.2
jnxAtmTrunkEncapsulation
The atm encapsulation type associated with the VC or Trunk.
atmCccCellRelay : ATM Cell Relay for CCC
Enumeration
Enumerated Values:
1other
2atmCccCellRelay
 .1.3.6.1.4.1.2636.3.10.4.1.3
jnxAtmTrunkFlags
Flags related to the Trunk.
JnxAtmFlags
Type Values:
0inverseArpEnabled
1ilmiEnabled
2oamEnabled
3shapingEnabled
4passiveOam
5multicast
6closed
7down
8active
9cosEnabled
 .1.3.6.1.4.1.2636.3.10.4.1.4
jnxAtmTrunkTotalDownTime
The total Trunk down time in seconds ever since the system rebooted.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2636.3.10.4.1.5
jnxAtmTrunkInBytes
The number of bytes received on the Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.4.1.6
jnxAtmTrunkOutBytes
The number of bytes sent out on the Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.4.1.7
jnxAtmTrunkInPkts
The number of packets received on the Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.4.1.8
jnxAtmTrunkOutPkts
The number of packets sent out on the Trunk.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.4.1.9
jnxAtmTrunkTailQueuePktDrops
The number of packets dropped due to bandwidth constraints.
Indicates that packets were queued to send out at a rate faster
than allowed.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2636.3.10.4.1.10
jnxAtmTrunkInOAMF4AISCells
The number of OAM F4 cells received, with AIS(Alarm Indication
Signal) bit set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.4.1.15
jnxAtmTrunkOutOAMF4AISCells
The number of OAM F4 cells sent, with AIS(Alarm Indication
Signal) bit set.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2636.3.10.4.1.16