jnxAtmIfInNoBufferOAMCells
JUNIPER-ATM-MIB ·
.1.3.6.1.4.1.2636.3.10.1.1.14
Object
column
SNMPv2-SMICounter64
The number of received OAM cells or raw cells dropped because no buffers were available to handle them.
Context
- MIB
- JUNIPER-ATM-MIB
- OID
.1.3.6.1.4.1.2636.3.10.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxAtmIfEntry
- Table
- jnxAtmIfTable
- Siblings
- 19
Syntax
SNMPv2-SMICounter64
- Source
- SNMPv2-SMICounter64
- Base type
Unsigned64
Values & Constraints
Type Constraints
range: 0..18446744073709551615
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxAtmIfPortType The physical port type. | column | Enumeration | .1.3.6.1.4.1.2636.3.10.1.1.1 |
| jnxAtmIfTxCellFIFOOverRuns The number of overruns in the Transmit FIFO. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.10 |
| jnxAtmIfRxCellFIFOOverRuns The number of overruns in the Receive FIFO. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.11 |
| jnxAtmIfRxCellFIFOUnderRuns The number of underruns in the receive FIFO. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.12 |
| jnxAtmIfInInvalidVCCells The number of Cells that arrived for non existent VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.13 |
| jnxAtmIfInNoBufDropPkts The number of AAL5 packets dropped because there was no enough
buffer to handle them. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.15 |
| jnxAtmIfOutVCQueueDrops The number of packets dropped because of queue limits on each VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.16 |
| jnxAtmIfInBadCrcs The total number of incoming CRC errors. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.17 |
| jnxAtmIfInLenErrPkts The number of AAL5 packets dropped because their length was incorrect. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.18 |
| jnxAtmIfInTimeoutPkts The number of AAL5 packets dropped because of reassembly timeout. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.19 |
| jnxAtmIfEncaps ATM physical link layer encapsulation. | column | Enumeration | .1.3.6.1.4.1.2636.3.10.1.1.2 |
| jnxAtmIfL2CircuitMode The layer 2 circuit mode of this Atm interface. Note, this
applies only to interfaces on AtmII pics. | column | Enumeration | .1.3.6.1.4.1.2636.3.10.1.1.20 |
| jnxAtmIfLpBackInfo Loop back config and type. | column | Enumeration | .1.3.6.1.4.1.2636.3.10.1.1.3 |
| jnxAtmIfScrambleEnable Shows whether scrambling is enabled or disabled | column | Enumeration | .1.3.6.1.4.1.2636.3.10.1.1.4 |
| jnxAtmIfTxCellCount The number of ATM cells transmitted by the interface.
Includes Idle cells transmitted. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.5 |
| jnxAtmIfRxCellCount The number of ATM cells received by the interface.
Excludes Idle cells received. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.6 |
| jnxAtmIfTxIdleCellCount The number of idle cells sent by the port. When the ATM interface
has nothing to send, it sends idle cells to fill the time slot. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.7 |
| jnxAtmIfUncorrHCSErrs The number of uncorrectable cell Header Check Sequence (HCS) Errors
that occurred. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.8 |
| jnxAtmIfCorrHCSErrs The number of correctable cell Header Check Sequence (HCS) Errors
that occurred. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.1.1.9 |