jnxAtmIfEntry

JUNIPER-ATM-MIB · .1.3.6.1.4.1.2636.3.10.1.1
MIB view Table view

Object

row 
This entry contains additional ATM interface config and stats
objects, not covered in standard mibs. Each entry is an extension
of atmInterfaceConfEntry defined in ATM-MIB.

Context

MIB
JUNIPER-ATM-MIB
OID
.1.3.6.1.4.1.2636.3.10.1.1
Type
row
Status
current
Parent
jnxAtmIfTable
Table
jnxAtmIfTable
Children
20

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects
ObjectTypeSyntaxOID
jnxAtmIfPortType
The physical port type.
columnEnumeration.1.3.6.1.4.1.2636.3.10.1.1.1
jnxAtmIfTxCellFIFOOverRuns
The number of overruns in the Transmit FIFO.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.10
jnxAtmIfRxCellFIFOOverRuns
The number of overruns in the Receive FIFO.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.11
jnxAtmIfRxCellFIFOUnderRuns
The number of underruns in the receive FIFO.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.12
jnxAtmIfInInvalidVCCells
The number of Cells that arrived for non existent VC.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.13
jnxAtmIfInNoBufferOAMCells
The number of received OAM cells or raw cells dropped because no buffers were available to handle them.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.14
jnxAtmIfInNoBufDropPkts
The number of AAL5 packets dropped because there was no enough buffer to handle them.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.15
jnxAtmIfOutVCQueueDrops
The number of packets dropped because of queue limits on each VC.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.16
jnxAtmIfInBadCrcs
The total number of incoming CRC errors.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.17
jnxAtmIfInLenErrPkts
The number of AAL5 packets dropped because their length was incorrect.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.18
jnxAtmIfInTimeoutPkts
The number of AAL5 packets dropped because of reassembly timeout.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.19
jnxAtmIfEncaps
ATM physical link layer encapsulation.
columnEnumeration.1.3.6.1.4.1.2636.3.10.1.1.2
jnxAtmIfL2CircuitMode
The layer 2 circuit mode of this Atm interface. Note, this applies only to interfaces on AtmII pics.
columnEnumeration.1.3.6.1.4.1.2636.3.10.1.1.20
jnxAtmIfLpBackInfo
Loop back config and type.
columnEnumeration.1.3.6.1.4.1.2636.3.10.1.1.3
jnxAtmIfScrambleEnable
Shows whether scrambling is enabled or disabled
columnEnumeration.1.3.6.1.4.1.2636.3.10.1.1.4
jnxAtmIfTxCellCount
The number of ATM cells transmitted by the interface. Includes Idle cells transmitted.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.5
jnxAtmIfRxCellCount
The number of ATM cells received by the interface. Excludes Idle cells received.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.6
jnxAtmIfTxIdleCellCount
The number of idle cells sent by the port. When the ATM interface has nothing to send, it sends idle cells to fill the time slot.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.7
jnxAtmIfUncorrHCSErrs
The number of uncorrectable cell Header Check Sequence (HCS) Errors that occurred.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.8
jnxAtmIfCorrHCSErrs
The number of correctable cell Header Check Sequence (HCS) Errors that occurred.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.2636.3.10.1.1.9