jnxAtmVCEntry
JUNIPER-ATM-MIB ·
.1.3.6.1.4.1.2636.3.10.2.1
Object
row
Special Cases: - No traffic Stats for multicast VCs. (0 by default). - Multipoint Destination IP Address for a p2p vc is invalid (0.0.0.0 by default). - When the encapsulation type for the logical interface (to which VC belongs) is 'atmCccCellRelay', only Generic VC Info is valid. - If OAM is disabled (indicated in jnxAtmVCFlags), then all the OAM config & F5 stats info is invalid. (zeroed by default).
Context
- MIB
- JUNIPER-ATM-MIB
- OID
.1.3.6.1.4.1.2636.3.10.2.1- Type
- row
- Status
- current
- Parent
- jnxAtmVCTable
- Table
- jnxAtmVCTable
- Children
- 20
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxAtmVCConnType The type of connection. The type 'other' means vc type is unknown
or is not one of the other types. | column | Enumeration | .1.3.6.1.4.1.2636.3.10.2.1.1 |
| jnxAtmVCOutPkts The number of packets sent out on the VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.2.1.10 |
| jnxAtmVCTailQueuePktDrops The number of packets dropped due to bandwidth constraints.
Indicates that packets were queued to send out at a rate faster
than allowed. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.2.1.11 |
| jnxAtmVCOAMPeriod This time interval indicates how often the F5 cells are sent to
know the status of the VC. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.10.2.1.12 |
| jnxAtmVCOAMUpCellCount The minimum number of loopback cells to be received to declare
that the VC is up. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.10.2.1.13 |
| jnxAtmVCOAMDownCellCount The minimum number of loopback cells to be received to declare
that the VC is down. This object would have zero value if OAM is
not enabled. (indicated in jnxAtmVCFlags) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.10.2.1.14 |
| jnxAtmVCInOAMF5LoopCells The number of OAM F5 loopback cells received. This object would
have zero value if OAM (as indicated in jnxAtmVCFlags) is not
enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.15 |
| jnxAtmVCOutOAMF5LoopCells The number of OAM F5 loopback cells sent. This object would have
zero value if OAM (as indicated in jnxAtmVCFlags) is not
enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.16 |
| jnxAtmVCInOAMF5RDICells The number of OAM F5 cells received, with RDI(Remote Defect
Indication) bit set. This object would have zero value if OAM
(as indicated in jnxAtmVCFlags) is not enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.17 |
| jnxAtmVCOutOAMF5RDICells The number of OAM F5 cells transmitted, with RDI(Remote Defect
Indication) bit set. This object would have zero value if OAM
(as indicated in jnxAtmVCFlags) is not enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.18 |
| jnxAtmVCInOAMF5AISCells The number of OAM F5 cells received, with AIS(Alarm Indication
Signal) bit set. This object would have zero value if OAM (as
indicated in jnxAtmVCFlags) is not enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.19 |
| jnxAtmVCEncapsulation The atm encapsulation type associated with the VC.
atmCccCellRelay : ATM Cell Relay for CCC
atmCccVcMux : ATM VC for CCC
atmCiscoNlpid : Cisco-compatible ATM NLPID encapsul… | column | Enumeration | .1.3.6.1.4.1.2636.3.10.2.1.2 |
| jnxAtmVCOutOAMF5AISCells The number of OAM F5 cells transmitted, with AIS (Alarm
Indication Signal) bit set. This object would have zero
value if OAM (as indicated in jnxAtmVCFlags) is not
enabled. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2636.3.10.2.1.20 |
| jnxAtmVCMpDestIPv4Addr This object is meaningful only if jnxAtmVCConnType value is
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
destination IPv4 address. When the VC connection ty… | column | INET-ADDRESS-MIBInetAddressIPv4 | .1.3.6.1.4.1.2636.3.10.2.1.3 |
| jnxAtmVCMpDestIPv6Addr This object is meaningful only if jnxAtmVCConnType value is
'p2mp' (point-to-multipoint). For a p2mp VC, it's the multipoint
destination IPv6 address. When the VC connection ty… | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.2636.3.10.2.1.4 |
| jnxAtmVCFlags Flags related to the VC. | column | JnxAtmFlags | .1.3.6.1.4.1.2636.3.10.2.1.5 |
| jnxAtmVCTotalDownTime The total VC down time in seconds ever since the system rebooted. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.10.2.1.6 |
| jnxAtmVCInBytes The number of bytes received on the VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.2.1.7 |
| jnxAtmVCOutBytes The number of bytes sent out on the VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.2.1.8 |
| jnxAtmVCInPkts The number of packets received on the VC. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2636.3.10.2.1.9 |