JNX-PPPOE-MIB Table View

The parameters for the PPPoEservice on this interface.

jnxPPPoEIfEntry row .1.3.6.1.4.1.2636.3.67.1.1.1.2.1

The Parameters for a particular PPPoEinterface.

Creating/deleting entries in this table causes corresponding entries for
be created/deleted in ifTable/ifXTable/jnxIfTable, and
jnxPPPoEIfStatsTable.

Indexes

jnxPPPoEIfIfIndex

Column	Syntax	OID
jnxPPPoEIfIfIndex The ifIndex value of the corresponding ifEntry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.1
jnxPPPoEIfMaxNumSessions The number of sessions allowed on the PPPoEinterface, zero indicates unlimited.	Integer32 Constraints: range: 0-65335	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.2
jnxPPPoEIfRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access, according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.3
jnxPPPoEIfLowerIfIndex The ifIndex of an interface over which this PPPoEinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.4
jnxPPPoEIfAcName The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.5
jnxPPPoEIfDupProtect Flag to allow duplicate MAC addresses.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.6
jnxPPPoEIfPADIFlag This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.7
jnxPPPoEIfAutoconfig This flags determines whether the upper PPPoEinterface is created dynamically or statically. When enable(1) the interface is created dynamically.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.8
jnxPPPoEIfServiceNameTable Associate a PPPoEService Name Table with this interface for PADI processing.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.9
jnxPPPoEIfPadrRemoteCircuitIdCapture This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag in the PADR packet.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.10
jnxPPPoEIfMtu The initial Maximum Transmit Unit (MTU) that the PPPoEmajor interface entity will advertise to the remote entity. If the value of this variable is 1 then the local PPPoEentity will use an MTU value determ…	Integer32 Constraints: range: 66-65535 range: 1-2	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.11
jnxPPPoEIfLockoutMin The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if jnxPPPoEIfAutoconfig is set for this int…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.12
jnxPPPoEIfLockoutMax The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if jnxPPPoEIfAutoconfig is set for this int…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13
jnxPPPoEIfDynamicProfile Attach dynamic-profile to this interface	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.14

The statistics for the PPP over Ethernet Interface for the PPPoE
service on this interface.

jnxPPPoEIfStatsEntry row .1.3.6.1.4.1.2636.3.67.1.1.1.3.1

The statistics for a particular PPPoEInterface.

Indexes

jnxPPPoEIfIfIndex

Column	Syntax	OID
jnxPPPoEIfStatsRxPADI Number of PADI packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.1
jnxPPPoEIfStatsTxPADO Number of PADO packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.2
jnxPPPoEIfStatsRxPADR Number of PADR packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.3
jnxPPPoEIfStatsTxPADS Number of PADS packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.4
jnxPPPoEIfStatsRxPADT Number of PADT packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.5
jnxPPPoEIfStatsTxPADT Number of PADT packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.6
jnxPPPoEIfStatsRxInvVersion Number of packets received with invalid version.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.7
jnxPPPoEIfStatsRxInvCode Number of packets received with invalid code.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.8
jnxPPPoEIfStatsRxInvTags Number of packets received with invalid tags.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.9
jnxPPPoEIfStatsRxInvSessionobsolete Number of packets received with invalid session identifiers. This object became obsolete when separate counters were added for PADI and PADR packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.10
jnxPPPoEIfStatsRxInvTypes Number of packets received with invalid types.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.11
jnxPPPoEIfStatsRxInvPackets Number of invalid packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.12
jnxPPPoEIfStatsRxInsufficientResources Number of session requests that could not be honored due to invalid resources.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.13
jnxPPPoEIfStatsTxPADM Number of PADM packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.14
jnxPPPoEIfStatsTxPADN Number of PADN packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.15
jnxPPPoEIfStatsRxInvTagLength Number of packets received with invalid tag length.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.16
jnxPPPoEIfStatsRxInvLength Number of packets received with invalid length.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.17
jnxPPPoEIfStatsRxInvPadISession Number of PADI packets received with invalid session identifiers.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.18
jnxPPPoEIfStatsRxInvPadRSession Number of PADR packets received with invalid session identifiers.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.1.3.1.19

The lockout configuration and state of a PPPoEclient on this interface.

jnxPPPoEIfLockoutEntry row .1.3.6.1.4.1.2636.3.67.1.1.1.4.1

Each entry contains the configuration and state of a particular
PPPoEinterface client lockout.

Indexes

jnxPPPoEIfIfIndex jnxPPPoEIfLockoutClientAddress

Column	Syntax	OID
jnxPPPoEIfLockoutClientAddress The source MAC address if the client.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2636.3.67.1.1.1.4.1.1
jnxPPPoEIfLockoutTime The time duration, in seconds, currently used to lockout the specified encapsulation type from recognition for the specified interface. The reported value is within the range specified by jnxPPPoEIfLockoutMin and jnxPP…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.2636.3.67.1.1.1.4.1.2
jnxPPPoEIfLockoutElapsedTime The elapsed time, in seconds, that the specified encapsulation type has been locked-out from recognition for the specified interface. Its value will not exceed that of jnxPPPoEIfLockoutTime. A value of 0 indicates th…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.2636.3.67.1.1.1.4.1.3
jnxPPPoEIfLockoutNextTime The time duration, in seconds, that will be used to lockout the specified encapsulation type from recognition for the specified interface for the next event that results in a lockout condition. The reported value is wi…	Integer32 Constraints: range: 0-86400	.1.3.6.1.4.1.2636.3.67.1.1.1.4.1.4

This table contains entries for PPPoESubinterfaces present in the
system.

jnxPPPoESubIfEntry row .1.3.6.1.4.1.2636.3.67.1.1.2.2.1

Each entry describes the characteristics of a PPPoESubinterface.
With READ-CREATE maximum access ,creating/deleting entries in this
table causes corresponding entries for
be created /deleted in ifTable/ifXTable/jnxIfTa…

Indexes

jnxPPPoESubIfIndex

Column	Syntax	OID
jnxPPPoESubIfIndex The ifIndex of the PPPoESubinterface. When creating entries in this table, suitable values for this object are determined by reading jnxPPPoESubNextIfIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.1
jnxPPPoESubIfRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access ,according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.2
jnxPPPoESubIfLowerIfIndex The ifIndex of a PPPoEinterface over which this PPPoESubinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.3
jnxPPPoESubIfId An integer identifier for the PPPoEsubinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces c…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.4
jnxPPPoESubIfSessionId The current sessionId associated with this sub-interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.5
jnxPPPoESubIfMotm A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message to the user.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.6
jnxPPPoESubIfUrl A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web-page for the user.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.7
jnxPPPoESubIfSubscriberIdHiWord The subscriber handle associated with this PPPoEsubinterface which can be used to index into the JUNIPER-SUBSCRIBER-MIB table entries. This object is equal to the most significant 32 bit of the 64 bit subscriber id.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.8
jnxPPPoESubIfSubscriberIdLoWord The subscriber handle associated with this PPPoEsubinterface which can be used to index into the JUNIPER-SUBSCRIBER-MIB table entries. This object is equal to the least significant 32 bit of the 64 bit subscriber id.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.2.2.1.9

Table containing the Queue parameters for the PPPoEsessions.

jnxPppoeSubIfPerQueueStatsEntry row .1.3.6.1.4.1.2636.3.67.1.1.2.3.1

The statistics for a particular trrafic class queue for
PPPoEsub Interface(i.e. session). ). Forwarding class to
queue number mapping is not always one-to-one. Forwarding
classes and queues are the same only when de…

Indexes

jnxPPPoESubIfIndex jnxPppoeSubIfQueueIndex

Column	Syntax	OID
jnxPppoeSubIfQueueIndex This attribute returns the queue index ranging from 0 to 7 of the queue configure on the PPPoEsubinterface to support the traffic class for PPPoEsession configured on that subinterface. Forwarding class to queue number…	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.1
jnxPppoeSubIfQueueStatsPacketSent This attribute returns the counts of number of packet sent per PPPoEsession and per queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.2
jnxPppoeSubIfQueueStatsBytesSent This attribute returns the counts of number of bytes sent per PPPoEsession and per queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.3
jnxPppoeSubIfQueueStatsPacketDropped This attribute returns the number of packet dropped per PPPoEsession and per queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.4
jnxPppoeSubIfQueueStatsBytesDropped This attribute returns the number of bytes dropped per PPPoEsession and per queue.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.5
jnxPppoeSubIfQueueStatsActualBitRate This attribute returns the actual bit rate for per PPPoEsession and per queue.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.6
jnxPppoeSubIfQueueStatsActualDroppedBitRate This attribute returns the actual dropped bit rate for per PPPoEsession and per queue.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.2.3.1.7

This table contains entries for the PPPoEService-name tables.

jnxPPPoEServiceNameTableEntry row .1.3.6.1.4.1.2636.3.67.1.1.4.1.1

The parameters for the PPPoEservice-name table.

Indexes

jnxPPPoEServiceNameTableName

Column	Syntax	OID
jnxPPPoEServiceNameTableName Service-name table name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2636.3.67.1.1.4.1.1.1
jnxPPPoEServiceNameTableRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access,according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.67.1.1.4.1.1.2

This table contains entries for the PPPoEService-names.

jnxPPPoEServiceNameEntry row .1.3.6.1.4.1.2636.3.67.1.1.4.2.1

The parameters for the PPPoEservice-name table entry.

Indexes

jnxPPPoEServiceNameTableName jnxPPPoEServiceName

Column	Syntax	OID
jnxPPPoEServiceName Service-name tag value.	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.1
jnxPPPoEServiceNameAction Identifies the behavior when the the Service-name tag is received in a PADI frame.	JnxPPPoEServiceNameAction Type Values: 0 drop 1 terminate	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.2
jnxPPPoEServiceNameDynamicProfile Dynamic Profile associated with a Service-name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.3
jnxPPPoEServiceNameRoutingInstance Routing Instance associated with a Service-name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.4
jnxPPPoEServiceNameMaxSessions The Max Sessions value used to cap the number of active PPPoEssessions that may be established with the specified Service entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.5
jnxPPPoEServiceNameRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access ,according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.67.1.1.4.2.1.6

This table contains entries for the PPPoEServicename AciAri entries.

jnxPPPoEServiceNameAciAriEntry row .1.3.6.1.4.1.2636.3.67.1.1.4.3.1

The parameters for the PPPoEservice-name AciAri table entry.

Indexes

jnxPPPoEServiceNameTableName jnxPPPoEServiceName jnxPPPoEServiceNameAgentCircuitId jnxPPPoEServiceNameAgentRemoteId

Column	Syntax	OID
jnxPPPoEServiceNameAgentCircuitId ACI tag values that the PPPoEclient would send in the PADI/PADR control packet.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.1
jnxPPPoEServiceNameAgentRemoteId ACI tag values that the PPPoEclient would send in the PADI/PADR control packet.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.2
jnxPPPoEServiceNameAciAriAction Identifies the behavior when the the Service-name with ACI/ARI pairs is received in a PADI frame.	JnxPPPoEServiceNameAction Type Values: 0 drop 1 terminate	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.3
jnxPPPoEServiceNameAciAriDynamicProfile Dynamic Profile associated with a Service-name and ACI/ARI pairs	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.4
jnxPPPoEServiceNameAciAriRoutingInstance Routing-Instance associated with a Service-name and ACI/ARI pairs	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.5
jnxPPPoEServiceNameAciAriStaticInterface Static Interface associated with each ACI/ARI Entry.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.6
jnxPPPoEServiceNameAciAriRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access, according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy …	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.3.67.1.1.4.3.1.7