jnxPPPoEIfLockoutMin

JNX-PPPOE-MIB · .1.3.6.1.4.1.2636.3.67.1.1.1.2.1.12

Object

column Integer32

The lower bound, in seconds, of the time range used to specify 
the duration of the lockout of the client from recognition for
the specified interface.  This only takes effect if
jnxPPPoEIfAutoconfig is set for this interface.
              
The ability to lockout the client in the event of an error in
creating a PPP interface is enabled by default.  The initial lockout
duration is this object's value and increases exponentially for
each failure that occurs for the client creating a PPP interface
for the PPPoEinterface within the greater of 15 minutes
and jnxPPPoEIfLockoutMax.
              
The lockout duration for the client will not exceed jnxPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
jnxPPPoEIfLockoutMax, then the lockout duration reverts to this
object's value.
              
              
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and jnxPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for 
debugging purposes or when this interface supports more than one session.

Context

MIB: JNX-PPPOE-MIB
OID: .1.3.6.1.4.1.2636.3.67.1.1.1.2.1.12
Type: column
Access: readonly
Status: current
Parent: jnxPPPoEIfEntry
Table: jnxPPPoEIfTable
Siblings: 13

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-86400

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxPPPoEIfIfIndex The ifIndex value of the corresponding ifEntry.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.1`
jnxPPPoEIfPadrRemoteCircuitIdCapture This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag in the PADR packet.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.10`
jnxPPPoEIfMtu The initial Maximum Transmit Unit (MTU) that the PPPoEmajor interface entity will advertise to the remote entity. If the value of this variable is 1 then the local …	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.11`
jnxPPPoEIfLockoutMax The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if …	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13`
jnxPPPoEIfDynamicProfile Attach dynamic-profile to this interface	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.14`
jnxPPPoEIfMaxNumSessions The number of sessions allowed on the PPPoEinterface, zero indicates unlimited.	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.2`
jnxPPPoEIfRowStatus Controls creation/deletion of entries in this table with READ-CREATE maximum access, according to the RowStatus textual convention, constrained to support the following values onl…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.3`
jnxPPPoEIfLowerIfIndex The ifIndex of an interface over which this PPPoEinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value …	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.4`
jnxPPPoEIfAcName The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.	column	OctetString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.5`
jnxPPPoEIfDupProtect Flag to allow duplicate MAC addresses.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.6`
jnxPPPoEIfPADIFlag This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.7`
jnxPPPoEIfAutoconfig This flags determines whether the upper PPPoEinterface is created dynamically or statically. When enable(1) the interface is created dynamically.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.8`
jnxPPPoEIfServiceNameTable Associate a PPPoEService Name Table with this interface for PADI processing.	column	OctetString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.9`