jnxPPPoEIfRowStatus – JNX-PPPOE-MIB

Object

column SNMPv2-TCRowStatus

Controls creation/deletion of entries in this table with READ-CREATE
maximum access, according to the
RowStatus textual convention, constrained to support the following
values only:
   createAndGo
   destroy
              
To create an entry in this table, the following entry objects MUST be
explicitly configured:
   jnxPPPoEIfRowStatus
   jnxPPPoEIfLowerIfIndex
              
In addition, when creating an entry the following conditions must hold:
   A value for jnxPPPoEIfIndex must have been determined previously,
   by reading jnxPPPoENextIfIndex.
              
   The interface identified by jnxPPPoEIfLowerIfIndex must exist, and
   must be an interface type that permits layering of PPPoEabove it.
              
A corresponding entry in ifTable/ifXTable/jnxIfTable is created or
destroyed as a result of creating or destroying an entry in this table.
              
The following values can be read from this object:
    active(1)

Context

MIB: JNX-PPPOE-MIB
OID: .1.3.6.1.4.1.2636.3.67.1.1.1.2.1.3
Type: column
Access: readonly
Status: current
Parent: jnxPPPoEIfEntry
Table: jnxPPPoEIfTable
Siblings: 13

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxPPPoEIfIfIndex The ifIndex value of the corresponding ifEntry.	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.1`
jnxPPPoEIfPadrRemoteCircuitIdCapture This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attribute when it arrives as a tag in the PADR packet.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.10`
jnxPPPoEIfMtu The initial Maximum Transmit Unit (MTU) that the PPPoEmajor interface entity will advertise to the remote entity. If the value of this variable is 1 then the local …	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.11`
jnxPPPoEIfLockoutMin The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if …	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.12`
jnxPPPoEIfLockoutMax The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if …	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.13`
jnxPPPoEIfDynamicProfile Attach dynamic-profile to this interface	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.14`
jnxPPPoEIfMaxNumSessions The number of sessions allowed on the PPPoEinterface, zero indicates unlimited.	column	Integer32	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.2`
jnxPPPoEIfLowerIfIndex The ifIndex of an interface over which this PPPoEinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value …	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.4`
jnxPPPoEIfAcName The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface.	column	OctetString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.5`
jnxPPPoEIfDupProtect Flag to allow duplicate MAC addresses.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.6`
jnxPPPoEIfPADIFlag This flag controls whether we always respond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resolve it.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.7`
jnxPPPoEIfAutoconfig This flags determines whether the upper PPPoEinterface is created dynamically or statically. When enable(1) the interface is created dynamically.	column	Enumeration	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.8`
jnxPPPoEIfServiceNameTable Associate a PPPoEService Name Table with this interface for PADI processing.	column	OctetString	`.1.3.6.1.4.1.2636.3.67.1.1.1.2.1.9`