INFINERA-TP-ODUICLIENTCTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
49
.1.3.6.1.4.1.21296.2.2.2.2.30.1 · 1 row entry · 49 columns
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk oduiClientCtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-ODUICLIENTCTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-ODUICLIENTCTP-MIB::oduiClientCtpTable'
A list of OduiClientCtp entries. Each entry is uniquely identified by the value of ifIndex.
oduiClientCtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.30.1.1
A OduiClientCtp entry containing information pertaining to Infinera OduiClientCtp interfaces. Entries will exist in this table for interfaces of type oduiclientCtp.
Indexes
Column Syntax OID
The Service Mode (SM) of the ODU client CTP (i.e., the mode/type of service in which
this ODU client CTP is being used,).
INFINERA-TC-MIBInfnServiceMode
Type Values:
1none
2adaptation
3networkWrapper
4muxed
5transport
6switching
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.1
The Service Mode Qualifier (SMQ) of the ODU client CTP
(i.e., the mode/type of service in which this ODU client CTP is being used,).
INFINERA-TC-MIBInfnSMQ
Type Values:
1none
2smqWithoutFecErrFwd
3smqWithFecErrFwd
4smqMuxDemux
5smqOC192
6smqSTM64
7smq10GBE
8smqOC48
9smqSTM16
10smqGFP
11smqODU4i
12smqODU4
13smqODU3iPlus
14smqODU3i
15smqODU3
16smqODU2e
17smqODU2
18smqODU1e
19smqODU1
20smqODU0
21smqODU3e2
22smqODU3e1
23smqWithFecOam
24smqOc768
25smqStm256
26smqOduAdapti
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.2
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
INFINERA-TC-MIBInfnMonitoringModer/w
Type Values:
1unused
2nim
3lim
4im
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.3
The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
This message is inserted based on appropriate setting of FacMonitoringMode
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.4
The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction).
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.5
The Destination Access Point Identifier that is expected from the Facility side(e.g., Trib to Line direction).
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.6
The TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction). This message
is inserted based on appropriate setting of TermMonitoringMode
OctetStringr/w
Constraints:
range: 1-64
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.7
The Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.8
The Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.9
The TTI message received from the Facility side (e.g., in the Trib to Term direction) of an OTU Trib Interface.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.10
The TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an ODU Trib Interface.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.11
Number of Defect Seconds in received direction during 15 minutes interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.12
Number of Defect Seconds in received direction during 24 hours interval.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.13
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.14
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.15
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning:
OFF: TIM-S is not reported.
DAPI: TIM-S is repor…
Enumerationr/w
Enumerated Values:
1off
2sapi
3dapi
4sapidapi
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.16
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI
message (on Terminal side). The following are the values and their meaning:
OFF: TIM-S is not reported.
Enumerationr/w
Enumerated Values:
1off
2sapi
3dapi
4sapidapi
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.17
List of active tandem connection monitoring points (list of (contained) ODUkT
CTP objects). The default of NONE(BITS 0) implies that none of the TCM fields are in use
no contained ODUkT CTP objects). Note that a maxim…
INFINERA-TC-MIBInfnTcmList
Type Values:
0tcm1Fac
1tcm1Term
2tcm2Fac
3tcm2Term
4tcm3Fac
5tcm3Term
6tcm4Fac
7tcm4Term
8tcm5Fac
9tcm5Term
10tcm6Fac
11tcm6Term
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.18
The ODU Service type that is configured on this generic OduiClientCtp managed object.
INFINERA-TC-MIBInfnServiceType
Type Values:
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
117bw10gbe
118bw100gbe
119bwOtuAdapti
120bwOduAdapti
Description:
The infinera supported payloads.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.19
Flag to enable or disable the collection of PMs on the Facility side of ODU Clients
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.20
Flag to enable or disable the collection of PMs on the Terminal side of ODU Clients.
INFINERA-TC-MIBInfnEnableDisabler/w
Type Values:
1disabled
2enabled
3unknown
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.21
The Alarm Reporting Control Flag for the ODU Clients.
INFINERA-TC-MIBInfnArcr/w
Type Values:
1allowed
2inhibited
Description:
This textual convention represents the alarm reporting control state of the manged objects.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.22
The Supporting Circuit ID List that is this client is using.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.23
This attribute indicates the Facility-side threshold level for declaring a performance monitoring (PM)
Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is
greate…
Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.24
This attribute indicates the Terminal side (e.g., Line side) threshold level for declaring a
performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in t…
Integer32r/w
Constraints:
range: 1-100
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.25
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
INFINERA-TC-MIBInfnMonitoringModer/w
Type Values:
1unused
2nim
3lim
4im
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.26
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.28
.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.29
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.30
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.31
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.32
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.33
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.34
INFINERA-TC-MIBInfnRate
Type Values:
1rateNotSet
2rate10GigAny
3rate25GigAny
4rate1GigAny
5rate40GigAny
6rate100GigAny
7rateccFlexAny
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.35
INFINERA-TC-MIBInfnXconType
Type Values:
1none
2unidirectionFrom
3unidirectionTo
4unidirectionToAndFrom
5bidirection
6bidirectionUnidirectionFrom
7bidirectionUnidirectionTo
8bidirectionUnidirectionToAndFrom
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.36
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.37
INFINERA-TC-MIBInfnTsgTyper/w
Type Values:
1tsg1G25
2tsg2G5
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.38
INFINERA-TC-MIBInfnServiceType
Type Values:
1notSet
2bw10g
3bw2d5g
4oc48
5oc192
6bwtdm155
7bwtdm622
8stm16
9stm64
10ficon
11escon
12bw10Gbe
13oc3
14oc12
15stm1
16stm4
17bw10Gcc
18bw1Gbe
19bw2d5Gcc
20bw2d38Gcc
21bw1G
22bw2x1GbeChan
23bw40g
24stm256
25stm256L1
26stm256L2
27stm256L3
28stm256L4
29oc768
30oc768L1
31oc768L2
32oc768L3
33oc768L4
34bw4xoc192
35bw4xstm64
36bw10Gdtf
37bw1Gfc
38bw2Gfc
39bw4Gfc
40bw4Gcc
41bw8Gfc
42bw10Gfc
43otu1
44otu2
45otu1e
46otu2e
47odu1
48odu1e
49odu2
50odu2e
51dv6000
52escon200Mcc
53ib2d5Gcc
54ib10Gcc
55hd1d485Gcc
56hd1d483Gcc
57sd270Mcc
58dvb270Mcc
59hdSdi3GPal
60hdSdi3GNtsc
61bw4Gig
62bw8Gig
63bw1d25g
64otu2f
65odu2f
66bwVideo270
67bw4GFc1
68bw4GFc2
69bw1d25Gcc
70bw40Gbe
71bw100Gbe
72bw10d3Gcc
73bw100g
74bw40gbellane
75bw100gbellane
76bwOdui0
77bwOdui1
78bwOdui2
79bwOdui3
80bwOdui4
81bwOdui3plus
82bwOtui0
83bwOtui1
84bwOtui2
85bwOtui3
86bwOtui4
87bwOtui3plus
88bwOtu4
89bwOtu3
90bwOdu4
91bwOdu3
92bwOtu3e1
93bwOtu3e2
94bwOdu3e1
95bwOdu3e2
96bwOdu0
97bwOduFlex
98bwOduFlexI
99bwGfp
100bw11G1Cc
101bwOtu2v
102bwCcFlex
103bw1G0625Cc
104bw2G125Cc
105bwOc768demux
106bwStm256demux
107bwTransparent
108bw40gedemux
109bw100gedemux
110bwOdu1dtn
111bWOdu2dtn
112bWOdu1edtn
113bWOdu2edtn
114bW10X10gdemux
115bwOdu2i4v
116bwOdu2i10v
117bw10gbe
118bw100gbe
119bwOtuAdapti
120bwOduAdapti
Description:
The infinera supported payloads.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.39
Flag to enable the loopback.
Enumerationr/w
Enumerated Values:
1none
2terminal
3facility
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.40
This attribute indicates the Facility-side (e.g., Trib-side/Client-side) threshold level for declaring a
Degraded Signal defect. A Degraded Signal defect shall be declared if SDThreshold consecutive bad PM Seconds are …
Integer32r/w
Constraints:
range: 2-10
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.41
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.42
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.43
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.44
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.45
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.46
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.47
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.48
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.49
INFINERA-TC-MIBInfnOtuBitRateK
Type Values:
1otu3i
2otu4i
3otu3iplus
4otuAdapti25g
5otuAdapti37g5
6otuAdapti50g
7otuAdapti75g
8otuAdapti100g
9otuAdapti112g5
10otuAdapti125g
11otuAdapti150g
12otuAdapti175g
13otuAdapti187g5
14otuAdapti200g
15otuAdapti225g
16otuAdapti250g
17otuAdapti262g5
18otuAdapti300g
19otuAdapti337g5
20otuAdapti350g
21otuAdapti375g
22otuAdapti400g
23otuAdapti450g
24otuAdapti500g
25otuAdapti600g
26otuAdapti750g
27otuAdapti800g
28otuAdapti900g
29otuAdapti1000g
30otuAdapti1200g
31otuAdapti1500g
32otuAdapti1800g
33otuAdapti2000g
34otuAdapti2400g
35otuAdapti275g
36otuAdapti525g
37otuAdapti550g
38otuAdapti675g
39otuAdapti700g
40otuAdapti825g
41otuAdapti1050g
42otuAdapti1100g
43otuAdapti1350g
44otuAdapti1400g
45otuAdapti1600g
46otuAdapti1650g
47otuAdapti2200g
48na
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.50