oduiClientCtpTcmList

INFINERA-TP-ODUICLIENTCTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.18
MIB view Table view

Object

column INFINERA-TC-MIBInfnTcmList 
List of active tandem connection monitoring points (list of (contained) ODUkT 
CTP objects). The default of NONE(BITS 0) implies that none of the TCM fields are in use 
no contained ODUkT CTP objects). Note that a maximum of 3 TCM IDs can be active at any given time, 
each with one or both sides (facility and/or terminal) active (e.g., there can be up to 6 ODUkT 
CTP object instances, but only for 3 TCM IDs). 
Each entry in the TCMList is active and will have a corresponding ODUkT client CTP created. 
For OTUk-based adaptation, TCMs can only be enabled on the Facility-side.

Context

MIB
INFINERA-TP-ODUICLIENTCTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.18
Type
column
Access
readonly
Status
current
Parent
oduiClientCtpEntry
Table
oduiClientCtpTable
Siblings
48

Syntax

INFINERA-TC-MIBInfnTcmList
Source
INFINERA-TC-MIBInfnTcmList
Base type
Bits

Values & Constraints

Type Values
0tcm1Fac
1tcm1Term
2tcm2Fac
3tcm2Term
4tcm3Fac
5tcm3Term
6tcm4Fac
7tcm4Term
8tcm5Fac
9tcm5Term
10tcm6Fac
11tcm6Term

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oduiClientCtpServiceMode
The Service Mode (SM) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,).
columnINFINERA-TC-MIBInfnServiceMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.1
oduiClientCtpFacReceivedTTI
The TTI message received from the Facility side (e.g., in the Trib to Term direction) of an OTU Trib Interface.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.10
oduiClientCtpTermReceivedTTI
The TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an ODU Trib Interface.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.11
oduiClientCtpRxDs15MinutesTce
Number of Defect Seconds in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.12
oduiClientCtpRxDsDayTce
Number of Defect Seconds in received direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.13
oduiClientCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.14
oduiClientCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.15
oduiClientCtpFacTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning: OFF: TIM…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.16
oduiClientCtpTermTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message (on Terminal side). The following are the values and the…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.17
oduiClientCtpConfiguredServiceType
The ODU Service type that is configured on this generic OduiClientCtp managed object.
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.19
oduiClientCtpServiceModeQualifier
The Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,).
columnINFINERA-TC-MIBInfnSMQ.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.2
oduiClientCtpFacPmHistStatsEnable
Flag to enable or disable the collection of PMs on the Facility side of ODU Clients
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.20
oduiClientCtpTermPmHistStatsEnable
Flag to enable or disable the collection of PMs on the Terminal side of ODU Clients.
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.21
oduiClientCtpAlarmReportControl
The Alarm Reporting Control Flag for the ODU Clients.
columnINFINERA-TC-MIBInfnArc.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.22
oduiClientCtpSupportingCircuitIdList
The Supporting Circuit ID List that is this client is using.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.23
oduiClientCtpFacDSThreshold
This attribute indicates the Facility-side threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected …
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.24
oduiClientCtpTermDSThreshold
This attribute indicates the Terminal side (e.g., Line side) threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the per…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.25
oduiClientCtpTermMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.26
oduiClientCtpTSCountcolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.28
oduiClientCtprate
.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.29
oduiClientCtpFacMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.3
oduiClientCtpTributaryPortNumbercolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.30
oduiClientCtpExpectedTPNscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.31
oduiClientCtpDetectedTPNscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.32
oduiClientCtpsupportingOPUTributarySlotscolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.33
oduiClientCtpavailableOPUTributarySlotscolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.34
oduiClientCtpdataratecolumnINFINERA-TC-MIBInfnRate.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.35
oduiClientCtpCrossConnectTypecolumnINFINERA-TC-MIBInfnXconType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.36
oduiClientCtpSupportingTPcolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.37
oduiClientCtpTsgcolumnINFINERA-TC-MIBInfnTsgType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.38
oduiClientCtpExpectedPayloadcolumnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.39
oduiClientCtpFacTxTTI
The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction). This message is inserted based on appropriate setting of FacMonitorin…
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.4
oduiClientCtpLoopBack
Flag to enable the loopback.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.40
oduiClientCtpFacSDThreshold
This attribute indicates the Facility-side (e.g., Trib-side/Client-side) threshold level for declaring a Degraded Signal defect. A Degraded Signal defect shall be declared if SDT…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.41
oduiClientCtpRxDsF15MinutesTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.42
oduiClientCtpRxDsF15MinutesTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.43
oduiClientCtpRxDsFDayTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.44
oduiClientCtpRxDsFDayTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.45
oduiClientCtpRxBei15MinutesTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.46
oduiClientCtpRxBei15MinutesTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.47
oduiClientCtpRxBeiDayTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.48
oduiClientCtpRxBeiDayTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.49
oduiClientCtpFacExpectedSAPI
The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.5
oduiClientCtpBitRateKcolumnINFINERA-TC-MIBInfnOtuBitRateK.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.50
oduiClientCtpFacExpectedDAPI
The Destination Access Point Identifier that is expected from the Facility side(e.g., Trib to Line direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.6
oduiClientCtpTermTxTTI
The TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction). This message is inserted based on appropriate setting of TermMonitorin…
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.7
oduiClientCtpTermExpectedSAPI
The Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.8
oduiClientCtpTermExpectedDAPI
The Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.9