oduiClientCtpFacTimDetMode

INFINERA-TP-ODUICLIENTCTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.16
MIB view Table view

Object

column r/w Enumeration 
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning:
OFF: TIM-S is not reported.
DAPI: TIM-S is reported only if the DAPI message mismatch occurs. 
SAPI: TIM-S is reported only if the SAPI message mismatch occurs.
DAPISAPI: Either the DAPI or    the SAPI messages are in a mis- match state.

Context

MIB
INFINERA-TP-ODUICLIENTCTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.16
Type
column
Access
readwrite
Status
current
Parent
oduiClientCtpEntry
Table
oduiClientCtpTable
Siblings
48

Syntax

Enumeration

Values & Constraints

Enumerated Values
1off
2sapi
3dapi
4sapidapi

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oduiClientCtpServiceMode
The Service Mode (SM) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,).
columnINFINERA-TC-MIBInfnServiceMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.1
oduiClientCtpFacReceivedTTI
The TTI message received from the Facility side (e.g., in the Trib to Term direction) of an OTU Trib Interface.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.10
oduiClientCtpTermReceivedTTI
The TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an ODU Trib Interface.
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.11
oduiClientCtpRxDs15MinutesTce
Number of Defect Seconds in received direction during 15 minutes interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.12
oduiClientCtpRxDsDayTce
Number of Defect Seconds in received direction during 24 hours interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.13
oduiClientCtpRxDsDayTceReporting
Flag that enables/disables the reporting of RxDsDayTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.14
oduiClientCtpRxDs15MinutesTceReporting
Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.15
oduiClientCtpTermTimDetMode
This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message (on Terminal side). The following are the values and the…
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.17
oduiClientCtpTcmList
List of active tandem connection monitoring points (list of (contained) ODUkT CTP objects). The default of NONE(BITS 0) implies that none of the TCM fields are in use no contain…
columnINFINERA-TC-MIBInfnTcmList.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.18
oduiClientCtpConfiguredServiceType
The ODU Service type that is configured on this generic OduiClientCtp managed object.
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.19
oduiClientCtpServiceModeQualifier
The Service Mode Qualifier (SMQ) of the ODU client CTP (i.e., the mode/type of service in which this ODU client CTP is being used,).
columnINFINERA-TC-MIBInfnSMQ.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.2
oduiClientCtpFacPmHistStatsEnable
Flag to enable or disable the collection of PMs on the Facility side of ODU Clients
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.20
oduiClientCtpTermPmHistStatsEnable
Flag to enable or disable the collection of PMs on the Terminal side of ODU Clients.
columnINFINERA-TC-MIBInfnEnableDisable.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.21
oduiClientCtpAlarmReportControl
The Alarm Reporting Control Flag for the ODU Clients.
columnINFINERA-TC-MIBInfnArc.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.22
oduiClientCtpSupportingCircuitIdList
The Supporting Circuit ID List that is this client is using.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.23
oduiClientCtpFacDSThreshold
This attribute indicates the Facility-side threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected …
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.24
oduiClientCtpTermDSThreshold
This attribute indicates the Terminal side (e.g., Line side) threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the per…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.25
oduiClientCtpTermMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.26
oduiClientCtpTSCountcolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.28
oduiClientCtprate
.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.29
oduiClientCtpFacMonitoringMode
Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s) (For side corresponding to MonitoringMode) (Fac-Side/Term-Side).
columnINFINERA-TC-MIBInfnMonitoringMode.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.3
oduiClientCtpTributaryPortNumbercolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.30
oduiClientCtpExpectedTPNscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.31
oduiClientCtpDetectedTPNscolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.32
oduiClientCtpsupportingOPUTributarySlotscolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.33
oduiClientCtpavailableOPUTributarySlotscolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.34
oduiClientCtpdataratecolumnINFINERA-TC-MIBInfnRate.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.35
oduiClientCtpCrossConnectTypecolumnINFINERA-TC-MIBInfnXconType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.36
oduiClientCtpSupportingTPcolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.37
oduiClientCtpTsgcolumnINFINERA-TC-MIBInfnTsgType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.38
oduiClientCtpExpectedPayloadcolumnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.39
oduiClientCtpFacTxTTI
The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction). This message is inserted based on appropriate setting of FacMonitorin…
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.4
oduiClientCtpLoopBack
Flag to enable the loopback.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.40
oduiClientCtpFacSDThreshold
This attribute indicates the Facility-side (e.g., Trib-side/Client-side) threshold level for declaring a Degraded Signal defect. A Degraded Signal defect shall be declared if SDT…
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.41
oduiClientCtpRxDsF15MinutesTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.42
oduiClientCtpRxDsF15MinutesTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.43
oduiClientCtpRxDsFDayTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.44
oduiClientCtpRxDsFDayTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.45
oduiClientCtpRxBei15MinutesTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.46
oduiClientCtpRxBei15MinutesTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.47
oduiClientCtpRxBeiDayTcecolumnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.48
oduiClientCtpRxBeiDayTceReportingcolumnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.49
oduiClientCtpFacExpectedSAPI
The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.5
oduiClientCtpBitRateKcolumnINFINERA-TC-MIBInfnOtuBitRateK.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.50
oduiClientCtpFacExpectedDAPI
The Destination Access Point Identifier that is expected from the Facility side(e.g., Trib to Line direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.6
oduiClientCtpTermTxTTI
The TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction). This message is inserted based on appropriate setting of TermMonitorin…
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.7
oduiClientCtpTermExpectedSAPI
The Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.8
oduiClientCtpTermExpectedDAPI
The Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction).
columnOctetString.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.9