oduiClientCtpFacDSThreshold
INFINERA-TP-ODUICLIENTCTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.24
Object
column
r/w
Integer32
This attribute indicates the Facility-side threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to the specified threshold level. This attribute maps to the DEGThr MIB of RFC-3591
Context
- MIB
- INFINERA-TP-ODUICLIENTCTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.30.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oduiClientCtpEntry
- Table
- oduiClientCtpTable
- Siblings
- 48
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oduiClientCtpServiceMode The Service Mode (SM) of the ODU client CTP (i.e., the mode/type of service in which
this ODU client CTP is being used,). | column | INFINERA-TC-MIBInfnServiceMode | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.1 |
| oduiClientCtpFacReceivedTTI The TTI message received from the Facility side (e.g., in the Trib to Term direction) of an OTU Trib Interface. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.10 |
| oduiClientCtpTermReceivedTTI The TTI message received from the Terminal side (e.g., in the Line to Trib direction) of an ODU Trib Interface. | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.11 |
| oduiClientCtpRxDs15MinutesTce Number of Defect Seconds in received direction during 15 minutes interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.12 |
| oduiClientCtpRxDsDayTce Number of Defect Seconds in received direction during 24 hours interval. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.13 |
| oduiClientCtpRxDsDayTceReporting Flag that enables/disables the reporting of RxDsDayTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.14 |
| oduiClientCtpRxDs15MinutesTceReporting Flag that enables/disables the reporting of RxDs15MinutesTce threshold crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.15 |
| oduiClientCtpFacTimDetMode This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI message. The following are the values and their meaning:
OFF: TIM… | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.16 |
| oduiClientCtpTermTimDetMode This attribute is used to configure if the TIM-S alarm shall be reported on mismatch of Expected and Received TTI
message (on Terminal side). The following are the values and the… | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.17 |
| oduiClientCtpTcmList List of active tandem connection monitoring points (list of (contained) ODUkT
CTP objects). The default of NONE(BITS 0) implies that none of the TCM fields are in use
no contain… | column | INFINERA-TC-MIBInfnTcmList | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.18 |
| oduiClientCtpConfiguredServiceType The ODU Service type that is configured on this generic OduiClientCtp managed object. | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.19 |
| oduiClientCtpServiceModeQualifier The Service Mode Qualifier (SMQ) of the ODU client CTP
(i.e., the mode/type of service in which this ODU client CTP is being used,). | column | INFINERA-TC-MIBInfnSMQ | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.2 |
| oduiClientCtpFacPmHistStatsEnable Flag to enable or disable the collection of PMs on the Facility side of ODU Clients | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.20 |
| oduiClientCtpTermPmHistStatsEnable Flag to enable or disable the collection of PMs on the Terminal side of ODU Clients. | column | INFINERA-TC-MIBInfnEnableDisable | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.21 |
| oduiClientCtpAlarmReportControl The Alarm Reporting Control Flag for the ODU Clients. | column | INFINERA-TC-MIBInfnArc | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.22 |
| oduiClientCtpSupportingCircuitIdList The Supporting Circuit ID List that is this client is using. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.23 |
| oduiClientCtpTermDSThreshold This attribute indicates the Terminal side (e.g., Line side) threshold level for declaring a
performance monitoring (PM) Second to be bad. A PM Second is declared bad if the per… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.25 |
| oduiClientCtpTermMonitoringMode Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side). | column | INFINERA-TC-MIBInfnMonitoringMode | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.26 |
| oduiClientCtpTSCount | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.28 |
| oduiClientCtprate . | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.29 |
| oduiClientCtpFacMonitoringMode Allowed Section Monitoring / Path Monitoring / TCM Attribute Value(s)
(For side corresponding to MonitoringMode) (Fac-Side/Term-Side). | column | INFINERA-TC-MIBInfnMonitoringMode | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.3 |
| oduiClientCtpTributaryPortNumber | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.30 |
| oduiClientCtpExpectedTPNs | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.31 |
| oduiClientCtpDetectedTPNs | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.32 |
| oduiClientCtpsupportingOPUTributarySlots | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.33 |
| oduiClientCtpavailableOPUTributarySlots | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.34 |
| oduiClientCtpdatarate | column | INFINERA-TC-MIBInfnRate | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.35 |
| oduiClientCtpCrossConnectType | column | INFINERA-TC-MIBInfnXconType | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.36 |
| oduiClientCtpSupportingTP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.37 |
| oduiClientCtpTsg | column | INFINERA-TC-MIBInfnTsgType | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.38 |
| oduiClientCtpExpectedPayload | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.39 |
| oduiClientCtpFacTxTTI The TTI message that needs to be transmitted in the Facility direction (e.g., from Line to Trib direction).
This message is inserted based on appropriate setting of FacMonitorin… | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.4 |
| oduiClientCtpLoopBack Flag to enable the loopback. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.40 |
| oduiClientCtpFacSDThreshold This attribute indicates the Facility-side (e.g., Trib-side/Client-side) threshold level for declaring a
Degraded Signal defect. A Degraded Signal defect shall be declared if SDT… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.41 |
| oduiClientCtpRxDsF15MinutesTce | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.42 |
| oduiClientCtpRxDsF15MinutesTceReporting | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.43 |
| oduiClientCtpRxDsFDayTce | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.44 |
| oduiClientCtpRxDsFDayTceReporting | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.45 |
| oduiClientCtpRxBei15MinutesTce | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.46 |
| oduiClientCtpRxBei15MinutesTceReporting | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.47 |
| oduiClientCtpRxBeiDayTce | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.48 |
| oduiClientCtpRxBeiDayTceReporting | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.49 |
| oduiClientCtpFacExpectedSAPI The Source Access Point Identifier that is expected from the Facility side (e.g., Trib to Line direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.5 |
| oduiClientCtpBitRateK | column | INFINERA-TC-MIBInfnOtuBitRateK | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.50 |
| oduiClientCtpFacExpectedDAPI The Destination Access Point Identifier that is expected from the Facility side(e.g., Trib to Line direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.6 |
| oduiClientCtpTermTxTTI The TTI message that needs to be transmitted in the Terminal direction (e.g., from Trib to Line direction). This message
is inserted based on appropriate setting of TermMonitorin… | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.7 |
| oduiClientCtpTermExpectedSAPI The Source Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.8 |
| oduiClientCtpTermExpectedDAPI The Destination Access Point Identifier that is expected from the Terminal side (e.g., in the Line to Trib direction). | column | OctetString | .1.3.6.1.4.1.21296.2.2.2.2.30.1.1.9 |