HUAWEI-MPLS-EXTEND-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
98

hwMplsTunnelTable

table
.1.3.6.1.4.1.2011.5.25.121.1.1 · 1 row entry · 33 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsTunnelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsTunnelTable' 
A tunnel needs to be uniquely identified across  
an MPLS network. Indexes hwMplsTunnelIndex and       
hwMplsTunnelInstance uniquely identify a tunnel 
on the LSR originating the tunnel. 
hwMplsTunnelIngressLSRId uniquely identifies a 
tunnel across an MPLS network. The last index     
hwMplsTunnelEgressLSRId is useful in identifying
all instances of a tunnel that are terminated on
the same egress LSR.
hwMplsTunnelEntry row .1.3.6.1.4.1.2011.5.25.121.1.1.1
A tunnel needs to be uniquely identified across
an MPLS network. Indexes hwMplsTunnelIndex and
hwMplsTunnelInstance uniquely identify a tunnel
on the LSR originating the tunnel.
hwMplsTunnelIngressLSRId uniqu…
Indexes
Column Syntax OID
hwMplsTunnelIndex
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
When the MPLS signalling protocol is rsvp(2), this value
equals to the value signaled in the Tunnel ID
of the SESSION object. …
MPLS-TC-STD-MIBMplsTunnelIndex
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.1
hwMplsTunnelInstance
Uniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs.
It is used to identify multiple instances of
tunnels for backup and parallel tunnels.
When the MPLS signaling protocol…
MPLS-TC-STD-MIBMplsTunnelInstanceIndex
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.2
hwMplsTunnelIngressLSRId
Indicates the ingress LSR ID of this tunnel.
When the MPLS signalling protocol
is rsvp(2), this value equals to the Tunnel
Sender Address in the Sender Template object and may
equal to the Extended Tunnel ID in the …
MPLS-TC-STD-MIBMplsExtendedTunnelId
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.3
hwMplsTunnelEgressLSRId
Indicates the egress LSR ID of this
tunnel. Reference to MPLS-TE-STD-MIB.
MPLS-TC-STD-MIBMplsExtendedTunnelId
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.4
hwMplsTunnelClassType
Indicates the bandwidth type used by this tunnel.
Options:
1. bc0(1) -indicates the bandwidth type is bc0.
2. bc1(2) -indicates the bandwidth type is bc1.
3. invalidValue(3) -indicates the invalid val…
Enumeration
Enumerated Values:
1bc0
2bc1
3invalidValue
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.5
hwMplsTunnelBandwidth
Indicates the bandwidth used by this tunnel.
Unit: kbit/s
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.6
hwMplsTunnelAdminStatus
Indicates the management status of this
tunnel.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) -indicates the management status of this tunnel is up.
2. down(2) -indicates the management status of this tunnel i…
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.7
hwMplsTunnelOperStatus
Indicates the actual operational status of this tunnel,
which is but not limited to the status of this tunnel of
a certain period.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) -indicates that the operatio…
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.8
hwMplsTunnelSessionAttr
Indicates protection types desired by the primary
tunnel, such as node protection, link protection or
bandwidth protection.
Options:
1. localProtectionDesired(0) -indicates link protection.
2. nodeProtectionDesire…
Bits
Enumerated Values:
0localProtectionDesired
1nodeProtectionDesired
2bandwidthProtectionDesired
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.9
hwMplsTunnelFrrSetupPrio
Indicates the setup PRI of auto-bypass tunnel.
Range: 0-7
Default: 7
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.10
hwMplsTunnelFrrHoldingPrio
Indicates the holding PRI of auto-bypass tunnel.
Range: 0-7
Default: 7
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.11
hwMplsTunnelFrrBandwidth
Indicates the protecting bandwidth of auto-bypass tunnel.
Its value is defined by the configuration on the primary
tunnel.
Unit: kbit/s
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.12
hwMplsTunnelFrrSwitchover
Indicates FRR switching times
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.13
hwMplsTunnelFrrBypassTableIndex
Indicates the index of the bypass tunnel table, that is,
the LSP ID of the bypass tunnel. The bypass table shows
interfaces protected by specified bypass tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.14
hwMplsTunnelFrrARHopTableIndex
Indicates the table index of the protection type adopted
by each hop of the primary tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.15
hwMplsTunnelName
Indicates the tunnel name. The name can refer to the tunnel
on the console port of the LSR. If mplsTunnelIsIf is set to
True, the IfName of the interface corresponding to this tunnel
should have a value equal to hwMp…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.16
hwMplsTunnelIfIndex
Indicates the interface index of the tunnel. It uniquely
identifies the tunnel name.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.17
hwMplsTunnelPreBandwidth
Indicates the original bandwidth of the tunnel
when the tunnel is in the Modify state.
Unit: kbit/s
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.18
hwMplsTunnelNextBandwidth
Indicates the bandwidth of the tunnel that is to be changed
when the tunnel is in the Modify state.
Unit: kbit/s
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.19
hwMplsTunnelCt0Bandwidth
The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s.
If all CT bandwidths are 0s, it means that this tunnel's Class-Type
is CT0, and bandwidth is 0 kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.20
hwMplsTunnelCt1Bandwidth
The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.21
hwMplsTunnelCt2Bandwidth
The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.22
hwMplsTunnelCt3Bandwidth
The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.23
hwMplsTunnelCt4Bandwidth
The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.24
hwMplsTunnelCt5Bandwidth
The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.25
hwMplsTunnelCt6Bandwidth
The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.26
hwMplsTunnelCt7Bandwidth
The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.27
hwMplsTunnelLspType
This object is meaningful only at the ingress of the tunnel. It indicates LSP types.
Options:
1. invalid(0) -indicates that the LSP type is invalid, the …
Enumeration
Enumerated Values:
0invalid
1primary
2primaryModifing
3hotStandby
4hotStandbyModifing
5ordinary
6ordinaryModifing
7bestEffort
8bestEffortModifing
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.28
hwMplsTunnelInterfaceName
Indicates the tunnel interface name. The object is
only valid at the ingress.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.29
hwMplsTunnelSignalProto
Indicates the signal protocol of this tunnel
Options:
1. rsvpTE(1) -indicates the signal protocol of this tunnel is RSVP-TE.
2. static(2) -indicates the signal protocol of this tunnel is STATIC.
3. staticCR(3) -indicat…
Enumeration
Enumerated Values:
1rsvpTE
2static
3staticCR
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.30
hwMplsTunnelType
This object is meaningful only at the ingress of the tunnel. It indicates tunnel types.
Options:
1. invalid(1) -indicates that the tunnel type is invalid…
Enumeration
Enumerated Values:
1invalid
2primaryTunnel
3bypassTunnel
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.31
hwMplsTunnelDirection
This object indicates tunnel direction.
Options:
1. noneDirectional(0) -indicates that the tunnel direction is invalid
2. unidirectional(1) -indicates that this is a unidirectional tunnel
3. bidirectional(2) -indicates…
Enumeration
Enumerated Values:
0noneDirectional
1unidirectional
2bidirectional
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.32
hwMplsTunnelSignalledTunnelName
Indicates the user-defined tunnel name
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.1.1.1.33

hwTunnelFrrBypassTable

table
.1.3.6.1.4.1.2011.5.25.121.1.2 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelFrrBypassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwTunnelFrrBypassTable' 
Indicates the bypass tunnel.
hwTunnelFrrBypassEntry row .1.3.6.1.4.1.2011.5.25.121.1.2.1
Indicates the bypass tunnel.The indexes of this entry are
hwTunnelFrrBypassListIndex and hwTunnelFrrBypassIndex.
Indexes
Column Syntax OID
hwTunnelFrrBypassListIndex
Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.2.1.1
hwTunnelFrrBypassIndex
Indicates the index of the bypass tunnel interface.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.2.1.2
hwTunnelFrrBypassProtIfIndex
Indicates the index of the interface protected by the bypass tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.2.1.3

hwTunnelFrrARHopTable

table
.1.3.6.1.4.1.2011.5.25.121.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelFrrARHopTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwTunnelFrrARHopTable' 
Indicates the FrrARHopTable, which will show every hop's frr 
protect information of the tunnel.
hwTunnelFrrARHopEntry row .1.3.6.1.4.1.2011.5.25.121.1.3.1
Indicates the FrrARHopTable, which will show every hop's frr
protect information of the tunnel.
The indexes of this entry are hwTunnelFrrARHopListIndex and hwTunnelFrrARHopIndex.
Indexes
Column Syntax OID
hwTunnelFrrARHopListIndex
Indicates the table index of each hop along the primary tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.3.1.1
hwTunnelFrrARHopIndex
Indicates the index of each hop along the primary tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.3.1.2
hwTunnelFrrARHopProtDesired
Indicates the FRR protection types desired by the primary tunnel interface, including:
0: link protection,
1: node protection,
2: bandwidth protection
Bits
Enumerated Values:
0localProtection
1nodeProtection
2bandwidthProtection
 .1.3.6.1.4.1.2011.5.25.121.1.3.1.3
hwTunnelFrrARHopProtActual
Indicates the actual FRR protection types of the primary tunnel interface, including:
0: link protection,
1: node protection,
2: bandwidth protection,
3: primary tunnel protection in use
Bits
Enumerated Values:
0localProtection
1nodeProtection
2bandwidthProtection
3protectionInuse
 .1.3.6.1.4.1.2011.5.25.121.1.3.1.4

hwTunnelFrrRouteDBTable

table
.1.3.6.1.4.1.2011.5.25.121.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTunnelFrrRouteDBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwTunnelFrrRouteDBTable' 
Indicates the primary tunnel is protected by which bypass tunnel.
hwTunnelFrrRouteDBEntry row .1.3.6.1.4.1.2011.5.25.121.1.4.1
Indicates the primary tunnel is protected by which bypass tunnel. The indexes of this
entry are hwTunnelFrrRouteDBTunnelIndex, hwTunnelFrrRouteDBTunnelInstance,
hwTunnelFrrRouteDBTunnelIngressLSRId and hwTunnelFrrRoute…
Indexes
Column Syntax OID
hwTunnelFrrRouteDBTunnelIndex
Identifies the index of the primary. Manager obtains new index
values for row creation in this table by reading mplsTunnelIndexNext.
When the MPLS signaling protocol is rsvp(2), this value equals to
the value signale…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.1
hwTunnelFrrRouteDBTunnelInstance
Uniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs.
It is the object identifies multiple instances of
tunnels for the purposes of backup and parallel
tunnels. When the MPL…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.2
hwTunnelFrrRouteDBTunnelIngressLSRId
Identifies the ingress LSR ID of the primary tunnel.
When the MPLS signalling protocol is rsvp(2),LSR ID
equals to the Tunnel Sender Address in the Sender
Template object or the Extended Tunnel Id in the
SESSION obj…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.3
hwTunnelFrrRouteDBTunnelEngressLSRId
Identifies the egress LSR ID of the primary tunnel.
Reference to MPLS-TE-STD-MIB.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.4
hwTunnelFrrRouteDBBypassIfIndex
Indicates the interface index of the bypass tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.5
hwTunnelFrrRouteDBInnerLabel
Indicates the inner label of the primary tunnel and bypass tunnel.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.4.1.6

hwStaticLspTable

table
.1.3.6.1.4.1.2011.5.25.121.1.5 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStaticLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwStaticLspTable' 
A static LSP is created by a network administrator by using 
static MPLS. Note that only point-to-point static LSP segments
are supported. Each static MPLS LSP can thus have one out-segment
originating at this LSR and/or one in-segment terminating at
this LSR.
hwStaticLspEntry row .1.3.6.1.4.1.2011.5.25.121.1.5.1
A static LSP is created by a network administrator by using
static MPLS. Note that only point-to-point static LSP segments
are supported. Each static MPLS LSP can thus have one out-segment
originating at this LSR and/o…
Indexes
Column Syntax OID
hwStaticLspIndex
Indicates the index of the static LSP. If the string is 0x00,
it means that the index is invalid.
MPLS-LSR-STD-MIBMplsIndexType
Type Constraints:
range: 1..24
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.1
hwStaticLspInSegmentIndex
Indicates the incoming label index of the static LSP/CR-LSP.
If the string is 0x00, it means that the index is invalid.
In this case, no corresponding mplsInSegmentEntry exists.
Reference to MPLS-LSR-STD-MIB.
MPLS-LSR-STD-MIBMplsIndexType
Type Constraints:
range: 1..24
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.2
hwStaticLspOutSegmentIndex
Indicates the outgoing index of the static LSP/CR-LSP.
If the entry is used to identify the incoming node or
intermediate node of the LSP, this object cannot be set
to the string 0x00. Because corresponding mplsOutSe…
MPLS-LSR-STD-MIBMplsIndexType
Type Constraints:
range: 1..24
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.3
hwStaticLspOwner
Denotes the entity that creates and manages the static LSP. See MPLS-LSR-STD-MIB.
Options:
1. static(1) -indicates the static LSP.
2. crstatic(2) -indicates the static CR-LSP.
3. other(3) -in…
Enumeration
Enumerated Values:
1static
2crstatic
3other
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.4
hwStaticLspName
Indicates the name of the static LSP or CR-LSP.
The name is appointed when the static LSP or CR-LSP
is created.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.5
hwStaticLspStatus
Indicates the actual operation status of the static LSP/CR-LSP.
Options:
1. up(1) -indicates that the static LSP/CR-LSP is in Up state.
2. down(2) -indicates that the static LSP/CR-LSP is in down state.
3.…
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.6
hwStaticLspClassType
The Class-Type of this static lsp.
Options:
1. ct0(1) -indicates that the class type is ct0.
2. ct1(2) -indicates that the class type is ct1.
3. ct2(…
Enumeration
Enumerated Values:
1ct0
2ct1
3ct2
4ct3
5ct4
6ct5
7ct6
8ct7
9none
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.7
hwStaticLspBandwidth
The bandwidth of this static lsp.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.5.1.8

hwMplsTeClassTable

table
.1.3.6.1.4.1.2011.5.25.121.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsTeClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsTeClassTable' 
TE-class mapping is a set of a maximum of eight TE-class items.          
TE-class is a <Class-Type, Priority> pair, such as TE-Class[1] = <CT0, 5>.              
A (setup/holding) priority associated with an LSP valid only if it appears
as a pair with the Class-Type. Class-Types and priorities can be randomly
paired up. You can define a maximum of eight <Class-Type, Priority> pairs.     
The LSR is considered to support a particular Class-Type only if it appears 
in the definition of the eight possible TE-Classes. It is suggested that all
the LSRs in the domain use the same TE-Class mapping.
hwMplsTeClassEntry row .1.3.6.1.4.1.2011.5.25.121.1.6.1
TE-class mapping is a set of a maximum of eight TE-class items.
TE-class is a <Class-Type, Priority> pair, such as TE-Class[1] = <CT0, 5>.
A (setup/holding) priority associated with an LSP valid …
Indexes
Column Syntax OID
hwMplsTeClassId
This value represents the index of the TE-Class configured
on this LSR.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.6.1.1
hwMplsTeClassClassType
This value represents a Class-Type supported on the LSR.
Options:
1. ct0(1) -indicates that the class type of static CR-LSP is ct0.
2. ct1(2) -indicates that…
Enumeration
Enumerated Values:
1ct0
2ct1
3ct2
4ct3
5ct4
6ct5
7ct6
8ct7
 .1.3.6.1.4.1.2011.5.25.121.1.6.1.2
hwMplsTeClassPriority
This value represents the preemption priority (setup or holding)
supported for a particular class-type, on the LSR.
Range: 0-7
Default: 7
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.6.1.3
hwMplsTeClassDescription
Textual description of the TE-Class defined by this row.
OctetString .1.3.6.1.4.1.2011.5.25.121.1.6.1.4

hwMplsIfBcTable

table
.1.3.6.1.4.1.2011.5.25.121.1.7 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsIfBcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsIfBcTable' 
This table describes bandwidth constraints associated with MPLS TE
enabled interfaces.
hwMplsIfBcEntry row .1.3.6.1.4.1.2011.5.25.121.1.7.1
This table describes bandwidth constraints associated with MPLS TE
enabled interfaces. The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwMplsIfMaxResvBandwidth
The maximum reservable bandwidth on this interface.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.1
hwMplsIfBc0Bandwidth
The bandwidth of Class-Type 0 (CT0) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.2
hwMplsIfBc1Bandwidth
The bandwidth of Class-Type 1 (CT1) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.3
hwMplsIfBc2Bandwidth
The bandwidth of Class-Type 2 (CT2) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.4
hwMplsIfBc3Bandwidth
The bandwidth of Class-Type 3 (CT3) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.5
hwMplsIfBc4Bandwidth
The bandwidth of Class-Type 4 (CT4) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.6
hwMplsIfBc5Bandwidth
The bandwidth of Class-Type 5 (CT5) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.7
hwMplsIfBc6Bandwidth
The bandwidth of Class-Type 6 (CT6) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.8
hwMplsIfBc7Bandwidth
The bandwidth of Class-Type 7 (CT7) in this tunnel.
Unit: kbit/s
kilobits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.7.1.9

hwStaticLspTnlTable

table
.1.3.6.1.4.1.2011.5.25.121.1.8 · 1 row entry · 2 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwStaticLspTnlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwStaticLspTnlTable' 
hwStaticLspTnlTable is used to display static LSP token of   
a static LSP of a specified name.
hwStaticLspTnlEntry row .1.3.6.1.4.1.2011.5.25.121.1.8.1
hwStaticLspTnlTable is used to display static LSP token of
a static LSP of a specified name. The index of this entry
is hwStaticLspTnlName.
Indexes
Column Syntax OID
hwStaticLspTnlName
Indicates the name of the Static Lsp.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.1.8.1.1
hwStaticLspTnlToken
Indicates the token of the Static Lsp.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.8.1.2

hwMplsTeVpnQosTable

table
.1.3.6.1.4.1.2011.5.25.121.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsTeVpnQosTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsTeVpnQosTable' 
This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID.
hwMplsTeVpnQosEntry row .1.3.6.1.4.1.2011.5.25.121.1.9.1
This table is used to display VPN QoS information of a specified TE Tunnel according to TunnelID.
The index of this entry is hwMplsTnlID.
Indexes
Column Syntax OID
hwMplsTnlID
The value of this object identifies the TE tunnel ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.9.1.1
hwMplsTeVpnMaxBandwidth
The value of this object identifies the bandwidth the TE tunnel can provide for VPN QoS.
Unit: kbit/s
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.9.1.2
hwMplsTeVpnAllocatedBandwidth
The value of this object identifies the bandwidth used by VPN QoS, in Kbps.
Unit: kbit/s
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.9.1.3

hwMplsTunnelStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.121.1.14 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsTunnelStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsTunnelStatisticsTable' 
This table allows you to use 3-tuple information to query 
traffic statistics on a TE tunnel interface.
hwMplsTunnelStatisticsEntry row .1.3.6.1.4.1.2011.5.25.121.1.14.1
A tunnel needs to be uniquely identified across
an MPLS network. hwMplsTunnelStatisticsTunnelIndex
uniquely identifies a tunnel on the LSR originating
the tunnel. hwMplsTunnelStatisticsIngressLSRId uniquely
identifi…
Indexes
Column Syntax OID
hwMplsTunnelStatisticsTunnelIndex
Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
When the MPLS signalling protocol is rsvp(2), this value
equals to the value signaled in the Tunnel ID
of the SESSION object. …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.1
hwMplsTunnelStatisticsIngressLSRId
Indicates the ingress LSR ID of this tunnel.
When the MPLS signalling protocol
is rsvp(2), this value equals to the Tunnel
Sender Address in the Sender Template object and may
equal to the Extended Tunnel ID in the …
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.2
hwMplsTunnelStatisticsEgressLSRId
Indicates the egress LSR ID of this
tunnel. Reference to MPLS-TE-STD-MIB.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.3
hwMplsTunnelStatisticsHCInOctets
The total number of octets received on the interface,
including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.4
hwMplsTunnelStatisticsHCOutOctets
The total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.5
hwMplsTunnelStatisticsTransitPackets
The total number of packets transmitted out of the
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.6
hwMplsTunnelStatisticsDiscardPackets
The total number of packets discarded out of the
interface.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.1.14.1.7

hwMplsLspStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.121.4.1 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsLspStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsLspStatisticsTable' 
hwMplsLspStatisticsTable is used to display the number of ingress LSPs,  
transit LSPs, or egress LSPs of specified types.
hwMplsLspStatisticsEntry row .1.3.6.1.4.1.2011.5.25.121.4.1.1
hwMplsLspStatisticsTable is used to display the number of ingress LSPs,
transit LSPs, or egress LSPs of specified types. The index of this entry
is hwMplsLspStatisticsLspType.
Indexes
Column Syntax OID
hwMplsLspStatisticsLspType
This object indicates the LSP type.
Options:
1. staticLsp(1) -indicates the static LSP.
2. staticCrLsp(2) -indicates the static CR-LSP.
3. ldpLsp(3) -in…
Enumeration
Enumerated Values:
1staticLsp
2staticCrLsp
3ldpLsp
4rsvpCrLsp
5bgpLsp
6asbrLsp
7bgpIpv6Lsp
8l3vpnIpv6Lsp
 .1.3.6.1.4.1.2011.5.25.121.4.1.1.1
hwMplsLspStatisticsIngressLspCount
This object indicates the number of ingress LSPs of a specified type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.4.1.1.2
hwMplsLspStatisticsTransitLspCount
This object indicates the number of transit LSPs of a specified type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.4.1.1.3
hwMplsLspStatisticsEgressLspCount
This object indicates the number of egress LSPs of a specified type.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.4.1.1.4
hwMplsLspStatisticsTotalLspCount
This object indicates the total number of the ingress LSPs, transit LSPs and egress LSP of specified types.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.4.1.1.5

hwMplsTrafficStatisticsStaticLspTable

table
.1.3.6.1.4.1.2011.5.25.121.4.2 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsTrafficStatisticsStaticLspTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsTrafficStatisticsStaticLspTable' 
Indicates the traffic statistics of a LSP.                                        
The indexes of this table is hwMplsTrafficStatisticsStaticLspName.
hwMplsTrafficStatisticsStaticLspEntry row .1.3.6.1.4.1.2011.5.25.121.4.2.1
Indicates the traffic statistics of a LSP. The indexes of this entry is
hwMplsTrafficStatisticsStaticLspName.
Indexes
Column Syntax OID
hwMplsTrafficStatisticsStaticLspName
Indicates the name of the static LSP or CR-LSP.
The name is appointed when the static LSP or CR-LSP
is created.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.1
hwMplsTrafficStatisticsStaticLspForwardInBytes
An estimate of the forward of bistatic LSP's current incoming traffic statistics
in units of bytes.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: bytes
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.2
hwMplsTrafficStatisticsStaticLspForwardInPackets
An estimate of the forward of bistatic LSP's current incoming traffic statistics
in units of packets.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: packets
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.3
hwMplsTrafficStatisticsStaticLspForwardOutBytes
An estimate of the forward of bistatic LSP's current outgoing traffic statistics
in units of bytes.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: bytes
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.4
hwMplsTrafficStatisticsStaticLspForwardOutPackets
An estimate of the forward of bistatic LSP's current outgoing traffic statistics
in units of packets.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: packets
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.5
hwMplsTrafficStatisticsStaticLspBackwardInBytes
An estimate of the backward of bistatic LSP's current incoming traffic statistics
in units of bytes.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: bytes
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.6
hwMplsTrafficStatisticsStaticLspBackwardInPackets
An estimate of the backward of bistatic LSP's current incoming traffic statistics
in units of packets.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: packets
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.7
hwMplsTrafficStatisticsStaticLspBackwardOutBytes
An estimate of the backward of bistatic LSP's current outgoing traffic statistics
in units of bytes.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: bytes
bytesSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.8
hwMplsTrafficStatisticsStaticLspBackwardOutPackets
An estimate of the backward of bistatic LSP's current outgoing traffic statistics
in units of packets.
For a sub-layer which has no concept of
traffic statistics, this object should be zero.
Unit: packets
packetsSNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.5.25.121.4.2.1.9

hwMplsRingTable

table
.1.3.6.1.4.1.2011.5.25.121.7.1 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwMplsRingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-MPLS-EXTEND-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-MPLS-EXTEND-MIB::hwMplsRingTable' 
Indicates the table information of the MPLS ring.
hwMplsRingEntry row .1.3.6.1.4.1.2011.5.25.121.7.1.1
Indicates the table information of the MPLS ring.
Indexes
Column Syntax OID
hwMplsRingID
Indicates the ID of the MPLS ring.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.7.1.1.1
hwMplsRingNodeID
Indicates the ID of the current Node on the MPLS ring.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.25.121.7.1.1.2
hwMplsRingName
Indicates the name of MPLS ring.
OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.3
hwMplsRingDirection
Indicates the direction of the MPLS ring.
OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.4
hwMplsRingSwitchReason
Indicates the switch reason of the MPLS ring.
OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.5