hwMplsTunnelFrrBandwidth
HUAWEI-MPLS-EXTEND-MIB ·
.1.3.6.1.4.1.2011.5.25.121.1.1.1.12
Object
column
SNMPv2-SMIUnsigned32
Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: kbit/s
Context
- MIB
- HUAWEI-MPLS-EXTEND-MIB
- OID
.1.3.6.1.4.1.2011.5.25.121.1.1.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwMplsTunnelEntry
- Table
- hwMplsTunnelTable
- Siblings
- 32
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwMplsTunnelIndex Uniquely identifies a set of tunnel instances
between a pair of ingress and egress LSRs.
When the MPLS signalling protocol is rsvp(2), this value
equals to the value signaled i… | column | MPLS-TC-STD-MIBMplsTunnelIndex | .1.3.6.1.4.1.2011.5.25.121.1.1.1.1 |
| hwMplsTunnelFrrSetupPrio Indicates the setup PRI of auto-bypass tunnel.
Range: 0-7
Default: 7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.10 |
| hwMplsTunnelFrrHoldingPrio Indicates the holding PRI of auto-bypass tunnel.
Range: 0-7
Default: 7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.11 |
| hwMplsTunnelFrrSwitchover Indicates FRR switching times | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.13 |
| hwMplsTunnelFrrBypassTableIndex Indicates the index of the bypass tunnel table, that is,
the LSP ID of the bypass tunnel. The bypass table shows
interfaces protected by specified bypass tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.14 |
| hwMplsTunnelFrrARHopTableIndex Indicates the table index of the protection type adopted
by each hop of the primary tunnel. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.15 |
| hwMplsTunnelName Indicates the tunnel name. The name can refer to the tunnel
on the console port of the LSR. If mplsTunnelIsIf is set to
True, the IfName of the interface corresponding to this t… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.1.1.1.16 |
| hwMplsTunnelIfIndex Indicates the interface index of the tunnel. It uniquely
identifies the tunnel name. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.17 |
| hwMplsTunnelPreBandwidth Indicates the original bandwidth of the tunnel
when the tunnel is in the Modify state.
Unit: kbit/s | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.18 |
| hwMplsTunnelNextBandwidth Indicates the bandwidth of the tunnel that is to be changed
when the tunnel is in the Modify state.
Unit: kbit/s | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.19 |
| hwMplsTunnelInstance Uniquely identifies a particular instance of a
tunnel between a pair of ingress and egress LSRs.
It is used to identify multiple instances of
tunnels for backup and parallel tu… | column | MPLS-TC-STD-MIBMplsTunnelInstanceIndex | .1.3.6.1.4.1.2011.5.25.121.1.1.1.2 |
| hwMplsTunnelCt0Bandwidth The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s.
If all CT bandwidths are 0s, it means that this tunnel's Class-Type
is CT0, and bandwidth is 0 kbit/… | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.20 |
| hwMplsTunnelCt1Bandwidth The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.21 |
| hwMplsTunnelCt2Bandwidth The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.22 |
| hwMplsTunnelCt3Bandwidth The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.23 |
| hwMplsTunnelCt4Bandwidth The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.24 |
| hwMplsTunnelCt5Bandwidth The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.25 |
| hwMplsTunnelCt6Bandwidth The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.26 |
| hwMplsTunnelCt7Bandwidth The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s.
Unit: kbit/s | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.27 |
| hwMplsTunnelLspType This object is meaningful only at the ingress of the tunnel. It indicates LSP types.
Options:
1. invalid(0) -indi… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.28 |
| hwMplsTunnelInterfaceName Indicates the tunnel interface name. The object is
only valid at the ingress. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.1.1.1.29 |
| hwMplsTunnelIngressLSRId Indicates the ingress LSR ID of this tunnel.
When the MPLS signalling protocol
is rsvp(2), this value equals to the Tunnel
Sender Address in the Sender Template object and may … | column | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.4.1.2011.5.25.121.1.1.1.3 |
| hwMplsTunnelSignalProto Indicates the signal protocol of this tunnel
Options:
1. rsvpTE(1) -indicates the signal protocol of this tunnel is RSVP-TE.
2. static(2) -indicates the signal protocol of this t… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.30 |
| hwMplsTunnelType This object is meaningful only at the ingress of the tunnel. It indicates tunnel types.
Options:
1. invalid(1) -i… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.31 |
| hwMplsTunnelDirection This object indicates tunnel direction.
Options:
1. noneDirectional(0) -indicates that the tunnel direction is invalid
2. unidirectional(1) -indicates that this is a unidirection… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.32 |
| hwMplsTunnelSignalledTunnelName Indicates the user-defined tunnel name | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2011.5.25.121.1.1.1.33 |
| hwMplsTunnelEgressLSRId Indicates the egress LSR ID of this
tunnel. Reference to MPLS-TE-STD-MIB. | column | MPLS-TC-STD-MIBMplsExtendedTunnelId | .1.3.6.1.4.1.2011.5.25.121.1.1.1.4 |
| hwMplsTunnelClassType Indicates the bandwidth type used by this tunnel.
Options:
1. bc0(1) -indicates the bandwidth type is bc0.
2. bc1(2) -indicates the bandwidth type is bc1.
3. in… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.5 |
| hwMplsTunnelBandwidth Indicates the bandwidth used by this tunnel.
Unit: kbit/s | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.121.1.1.1.6 |
| hwMplsTunnelAdminStatus Indicates the management status of this
tunnel.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) -indicates the management status of this tunnel is up.
2. down(2) -indicate… | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.7 |
| hwMplsTunnelOperStatus Indicates the actual operational status of this tunnel,
which is but not limited to the status of this tunnel of
a certain period.Reference to MPLS-TE-STD-MIB.
Options:
1. up(1) … | column | Enumeration | .1.3.6.1.4.1.2011.5.25.121.1.1.1.8 |
| hwMplsTunnelSessionAttr Indicates protection types desired by the primary
tunnel, such as node protection, link protection or
bandwidth protection.
Options:
1. localProtectionDesired(0) -indicates … | column | Bits | .1.3.6.1.4.1.2011.5.25.121.1.1.1.9 |