Standard view Table view

HUAWEI-MPLS-EXTEND-MIB

        This MIB is used for defining the HUAWEI private   
extended Multiprotocol Label Switching (MPLS) MIB
object. All MIB objects are used to describe private
managed objects and trap definitions for MPLS.
hwMplsExtendMib 1.3.6.1.4.1.2011.5.25.121
Imported Objects
HUAWEI-MIB hwDatacomm
IF-MIB ifIndex ifName
INET-ADDRESS-MIB InetAddress InetAddressType
MPLS-LSR-STD-MIB MplsIndexType
MPLS-TC-STD-MIB MplsExtendedTunnelId MplsLsrIdentifier MplsTunnelIndex MplsTunnelInstanceIndex
MPLS-TE-STD-MIB mplsTunnelAdminStatus mplsTunnelOperStatus
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
Objects (173)
hwMplsExtendMib .1.3.6.1.4.1.2011.5.25.121
hwMplsExtendMibTunnel .1.3.6.1.4.1.2011.5.25.121.1
hwMplsTunnelTable .1.3.6.1.4.1.2011.5.25.121.1.1
hwMplsTunnelEntry hwMplsTunnelIndexhwMplsTunnelInstancehwMplsTunnelIngressLSRIdhwMplsTunnelEgressLSRId .1.3.6.1.4.1.2011.5.25.121.1.1.1
hwMplsTunnelIndex MPLS-TC-STD-MIBMplsTunnelIndex .1.3.6.1.4.1.2011.5.25.121.1.1.1.1
hwMplsTunnelFrrSetupPrio Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.10
hwMplsTunnelFrrHoldingPrio Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.11
hwMplsTunnelFrrBandwidth Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.12
hwMplsTunnelFrrSwitchover SNMPv2-SMICounter32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.13
hwMplsTunnelFrrBypassTableIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.14
hwMplsTunnelFrrARHopTableIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.15
hwMplsTunnelName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.1.1.1.16
hwMplsTunnelIfIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.17
hwMplsTunnelPreBandwidth Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.18
hwMplsTunnelNextBandwidth Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.19
hwMplsTunnelInstance MPLS-TC-STD-MIBMplsTunnelInstanceIndex .1.3.6.1.4.1.2011.5.25.121.1.1.1.2
hwMplsTunnelCt0Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.20
hwMplsTunnelCt1Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.21
hwMplsTunnelCt2Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.22
hwMplsTunnelCt3Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.23
hwMplsTunnelCt4Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.24
hwMplsTunnelCt5Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.25
hwMplsTunnelCt6Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.26
hwMplsTunnelCt7Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.27
hwMplsTunnelLspType Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.28
hwMplsTunnelInterfaceName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.1.1.1.29
hwMplsTunnelIngressLSRId MPLS-TC-STD-MIBMplsExtendedTunnelId .1.3.6.1.4.1.2011.5.25.121.1.1.1.3
hwMplsTunnelSignalProto Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.30
hwMplsTunnelType Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.31
hwMplsTunnelDirection Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.32
hwMplsTunnelSignalledTunnelName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.1.1.1.33
hwMplsTunnelEgressLSRId MPLS-TC-STD-MIBMplsExtendedTunnelId .1.3.6.1.4.1.2011.5.25.121.1.1.1.4
hwMplsTunnelClassType Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.5
hwMplsTunnelBandwidth Integer32 .1.3.6.1.4.1.2011.5.25.121.1.1.1.6
hwMplsTunnelAdminStatus Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.7
hwMplsTunnelOperStatus Enumeration .1.3.6.1.4.1.2011.5.25.121.1.1.1.8
hwMplsTunnelSessionAttr Bits .1.3.6.1.4.1.2011.5.25.121.1.1.1.9
hwStaticLspInIfIndex OctetString .1.3.6.1.4.1.2011.5.25.121.1.11
hwStaticLspInIfName OctetString .1.3.6.1.4.1.2011.5.25.121.1.12
hwStaticLspDownReason Integer32 .1.3.6.1.4.1.2011.5.25.121.1.13
hwMplsTunnelStatisticsTable .1.3.6.1.4.1.2011.5.25.121.1.14
hwMplsTunnelStatisticsEntry hwMplsTunnelStatisticsTunnelIndexhwMplsTunnelStatisticsIngressLSRIdhwMplsTunnelStatisticsEgressLSRId .1.3.6.1.4.1.2011.5.25.121.1.14.1
hwMplsTunnelStatisticsTunnelIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.14.1.1
hwMplsTunnelStatisticsIngressLSRId SNMPv2-SMIIpAddress .1.3.6.1.4.1.2011.5.25.121.1.14.1.2
hwMplsTunnelStatisticsEgressLSRId SNMPv2-SMIIpAddress .1.3.6.1.4.1.2011.5.25.121.1.14.1.3
hwMplsTunnelStatisticsHCInOctets SNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.1.14.1.4
hwMplsTunnelStatisticsHCOutOctets SNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.1.14.1.5
hwMplsTunnelStatisticsTransitPackets SNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.1.14.1.6
hwMplsTunnelStatisticsDiscardPackets SNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.1.14.1.7
hwTunnelFrrBypassTable .1.3.6.1.4.1.2011.5.25.121.1.2
hwTunnelFrrBypassEntry hwTunnelFrrBypassListIndexhwTunnelFrrBypassIndex .1.3.6.1.4.1.2011.5.25.121.1.2.1
hwTunnelFrrBypassListIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.2.1.1
hwTunnelFrrBypassIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.2.1.2
hwTunnelFrrBypassProtIfIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.2.1.3
hwTunnelFrrARHopTable .1.3.6.1.4.1.2011.5.25.121.1.3
hwTunnelFrrARHopEntry hwTunnelFrrARHopListIndexhwTunnelFrrARHopIndex .1.3.6.1.4.1.2011.5.25.121.1.3.1
hwTunnelFrrARHopListIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.3.1.1
hwTunnelFrrARHopIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.3.1.2
hwTunnelFrrARHopProtDesired Bits .1.3.6.1.4.1.2011.5.25.121.1.3.1.3
hwTunnelFrrARHopProtActual Bits .1.3.6.1.4.1.2011.5.25.121.1.3.1.4
hwTunnelFrrRouteDBTable .1.3.6.1.4.1.2011.5.25.121.1.4
hwTunnelFrrRouteDBEntry hwTunnelFrrRouteDBTunnelIndexhwTunnelFrrRouteDBTunnelInstancehwTunnelFrrRouteDBTunnelIngressLSRIdhwTunnelFrrRouteDBTunnelEngressLSRId .1.3.6.1.4.1.2011.5.25.121.1.4.1
hwTunnelFrrRouteDBTunnelIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.1
hwTunnelFrrRouteDBTunnelInstance Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.2
hwTunnelFrrRouteDBTunnelIngressLSRId Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.3
hwTunnelFrrRouteDBTunnelEngressLSRId Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.4
hwTunnelFrrRouteDBBypassIfIndex Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.5
hwTunnelFrrRouteDBInnerLabel Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.4.1.6
hwStaticLspTable .1.3.6.1.4.1.2011.5.25.121.1.5
hwStaticLspEntry hwStaticLspIndexhwStaticLspInSegmentIndexhwStaticLspOutSegmentIndex .1.3.6.1.4.1.2011.5.25.121.1.5.1
hwStaticLspIndex MPLS-LSR-STD-MIBMplsIndexType .1.3.6.1.4.1.2011.5.25.121.1.5.1.1
hwStaticLspInSegmentIndex MPLS-LSR-STD-MIBMplsIndexType .1.3.6.1.4.1.2011.5.25.121.1.5.1.2
hwStaticLspOutSegmentIndex MPLS-LSR-STD-MIBMplsIndexType .1.3.6.1.4.1.2011.5.25.121.1.5.1.3
hwStaticLspOwner Enumeration .1.3.6.1.4.1.2011.5.25.121.1.5.1.4
hwStaticLspName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.1.5.1.5
hwStaticLspStatus Enumeration .1.3.6.1.4.1.2011.5.25.121.1.5.1.6
hwStaticLspClassType Enumeration .1.3.6.1.4.1.2011.5.25.121.1.5.1.7
hwStaticLspBandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.5.1.8
hwMplsTeClassTable .1.3.6.1.4.1.2011.5.25.121.1.6
hwMplsTeClassEntry hwMplsTeClassId .1.3.6.1.4.1.2011.5.25.121.1.6.1
hwMplsTeClassId Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.6.1.1
hwMplsTeClassClassType Enumeration .1.3.6.1.4.1.2011.5.25.121.1.6.1.2
hwMplsTeClassPriority Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.6.1.3
hwMplsTeClassDescription OctetString .1.3.6.1.4.1.2011.5.25.121.1.6.1.4
hwMplsIfBcTable .1.3.6.1.4.1.2011.5.25.121.1.7
hwMplsIfBcEntry IF-MIBifIndex .1.3.6.1.4.1.2011.5.25.121.1.7.1
hwMplsIfMaxResvBandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.1
hwMplsIfBc0Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.2
hwMplsIfBc1Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.3
hwMplsIfBc2Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.4
hwMplsIfBc3Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.5
hwMplsIfBc4Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.6
hwMplsIfBc5Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.7
hwMplsIfBc6Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.8
hwMplsIfBc7Bandwidth kilobits per secondUnsigned32 .1.3.6.1.4.1.2011.5.25.121.1.7.1.9
hwStaticLspTnlTable .1.3.6.1.4.1.2011.5.25.121.1.8
hwStaticLspTnlEntry hwStaticLspTnlName .1.3.6.1.4.1.2011.5.25.121.1.8.1
hwStaticLspTnlName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.1.8.1.1
hwStaticLspTnlToken Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.8.1.2
hwMplsTeVpnQosTable .1.3.6.1.4.1.2011.5.25.121.1.9
hwMplsTeVpnQosEntry hwMplsTnlID .1.3.6.1.4.1.2011.5.25.121.1.9.1
hwMplsTnlID Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.9.1.1
hwMplsTeVpnMaxBandwidth Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.9.1.2
hwMplsTeVpnAllocatedBandwidth Unsigned32 .1.3.6.1.4.1.2011.5.25.121.1.9.1.3
hwMplsExtendTrap .1.3.6.1.4.1.2011.5.25.121.2
hwLspTrap .1.3.6.1.4.1.2011.5.25.121.2.1
hwMplsTrapObjects .1.3.6.1.4.1.2011.5.25.121.2.2
hwMplsTunnelIfName obsolete SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.2.2.1
hwMplsTunnelDownIfIpAddrType INET-ADDRESS-MIBInetAddressType .1.3.6.1.4.1.2011.5.25.121.2.2.10
hwMplsResourceType Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.11
hwMplsResourceCurrentCount Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.12
hwMplsResourceThreshold Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.13
hwMplsResourceTotalCount Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.14
hwMplsSessionTunnelId Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.15
hwMplsLocalLspId Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.16
hwMplsIngressLsrId MPLS-TC-STD-MIBMplsLsrIdentifier .1.3.6.1.4.1.2011.5.25.121.2.2.17
hwMplsEgressLsrId MPLS-TC-STD-MIBMplsLsrIdentifier .1.3.6.1.4.1.2011.5.25.121.2.2.18
hwMplsLspName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.2.2.19
hwMplsTunnelFrrConfigOper obsolete Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.2
hwMplsP2mpId INET-ADDRESS-MIBInetAddress .1.3.6.1.4.1.2011.5.25.121.2.2.20
hwMplsFeatureName Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.21
hwMplsAlgorithmName Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.22
hwMplsSlot Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.23
hwMplsChassis Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.24
hwMplsTunnelDownReason Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.3
hwMplsLspProtocol Enumeration .1.3.6.1.4.1.2011.5.25.121.2.2.4
hwMplsLspThreshold Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.5
hwMplsLspTotalCount Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.6
hwMplsLspCurrentCount Integer32 .1.3.6.1.4.1.2011.5.25.121.2.2.7
hwMplsTunnelDownLSRID MPLS-TC-STD-MIBMplsLsrIdentifier .1.3.6.1.4.1.2011.5.25.121.2.2.8
hwMplsTunnelDownIfIpAddr INET-ADDRESS-MIBInetAddress .1.3.6.1.4.1.2011.5.25.121.2.2.9
hwMplsGlobalObject .1.3.6.1.4.1.2011.5.25.121.3
hwMplsGlobalWorkMode Enumeration .1.3.6.1.4.1.2011.5.25.121.3.1
hwBlockLabelThresholdLowerLimit Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.10
hwMplsGlobalBcModel Enumeration .1.3.6.1.4.1.2011.5.25.121.3.2
hwMplsDynamicLabelTotalCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.3
hwMplsDynamicLabelCurrentCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.4
hwMplsDynamicLabelThresholdUpperLimit Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.5
hwMplsDynamicLabelThresholdLowerLimit Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.6
hwBlockLabelTotalCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.7
hwBlockLabelCurrentCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.8
hwBlockLabelThresholdUpperLimit Unsigned32 .1.3.6.1.4.1.2011.5.25.121.3.9
hwMplsLspStatistics .1.3.6.1.4.1.2011.5.25.121.4
hwMplsLspStatisticsTable .1.3.6.1.4.1.2011.5.25.121.4.1
hwMplsLspStatisticsEntry hwMplsLspStatisticsLspType .1.3.6.1.4.1.2011.5.25.121.4.1.1
hwMplsLspStatisticsLspType Enumeration .1.3.6.1.4.1.2011.5.25.121.4.1.1.1
hwMplsLspStatisticsIngressLspCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.4.1.1.2
hwMplsLspStatisticsTransitLspCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.4.1.1.3
hwMplsLspStatisticsEgressLspCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.4.1.1.4
hwMplsLspStatisticsTotalLspCount Unsigned32 .1.3.6.1.4.1.2011.5.25.121.4.1.1.5
hwMplsTrafficStatisticsStaticLspTable .1.3.6.1.4.1.2011.5.25.121.4.2
hwMplsTrafficStatisticsStaticLspEntry hwMplsTrafficStatisticsStaticLspName .1.3.6.1.4.1.2011.5.25.121.4.2.1
hwMplsTrafficStatisticsStaticLspName SNMP-FRAMEWORK-MIBSnmpAdminString .1.3.6.1.4.1.2011.5.25.121.4.2.1.1
hwMplsTrafficStatisticsStaticLspForwardInBytes bytesSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.2
hwMplsTrafficStatisticsStaticLspForwardInPackets packetsSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.3
hwMplsTrafficStatisticsStaticLspForwardOutBytes bytesSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.4
hwMplsTrafficStatisticsStaticLspForwardOutPackets packetsSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.5
hwMplsTrafficStatisticsStaticLspBackwardInBytes bytesSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.6
hwMplsTrafficStatisticsStaticLspBackwardInPackets packetsSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.7
hwMplsTrafficStatisticsStaticLspBackwardOutBytes bytesSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.8
hwMplsTrafficStatisticsStaticLspBackwardOutPackets packetsSNMPv2-SMICounter64 .1.3.6.1.4.1.2011.5.25.121.4.2.1.9
hwMplsExtendConformance .1.3.6.1.4.1.2011.5.25.121.6
hwMplsExtendGroups .1.3.6.1.4.1.2011.5.25.121.6.1
hwMplsExtendCompliances .1.3.6.1.4.1.2011.5.25.121.6.2
hwMplsRingMib .1.3.6.1.4.1.2011.5.25.121.7
hwMplsRingTable .1.3.6.1.4.1.2011.5.25.121.7.1
hwMplsRingEntry hwMplsRingID .1.3.6.1.4.1.2011.5.25.121.7.1.1
hwMplsRingID Unsigned32 .1.3.6.1.4.1.2011.5.25.121.7.1.1.1
hwMplsRingNodeID Unsigned32 .1.3.6.1.4.1.2011.5.25.121.7.1.1.2
hwMplsRingName OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.3
hwMplsRingDirection OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.4
hwMplsRingSwitchReason OctetString .1.3.6.1.4.1.2011.5.25.121.7.1.1.5
hwMplsRingTrap .1.3.6.1.4.1.2011.5.25.121.7.2
Notifications / Traps (154)
NameOIDDescription
hwMplsStaticLspUp
hwStaticLspName hwStaticLspStatus IF-MIBifName hwStaticLspInIfIndex hwStaticLspInIfName hwStaticLspDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.1 
This notification indicates that the status of referred static LSP changes to Up.
hwMplsTunnelHSBResume
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.10 
This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP.
hwP2mpTeSubLspDownAlarm
hwMplsTunnelInterfaceName hwMplsTunnelLspType hwMplsP2mpId hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr
.1.3.6.1.4.1.2011.5.25.121.2.1.100 
This object indicates that the status of the P2MP tunnel sub-lsp changes to down.
hwP2mpTeSubLspDownAlarmClear
hwMplsTunnelInterfaceName hwMplsTunnelLspType hwMplsP2mpId hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr
.1.3.6.1.4.1.2011.5.25.121.2.1.101 
This object indicates that the alarm of the P2MP tunnel sub-lsp was cleared.
hwMplsTeBandwidthExceed
IF-MIBifIndex IF-MIBifName
.1.3.6.1.4.1.2011.5.25.121.2.1.102 
This object indicates that the configured maximum reservable bandwidth of MPLS TE is greater than the remaining bandwidth of the interface.
hwMplsTeBandwidthExceedClear
IF-MIBifIndex IF-MIBifName
.1.3.6.1.4.1.2011.5.25.121.2.1.103 
This object indicates that the MPLS-TE bandwidth exceed alarm was cleared.
hwMplsTunnelOBSwitch
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.11 
This notification indicates that the primary CR-LSP is down and the Ordinary backup CR-LSP is up.
hwMplsTunnelOBResume
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.12 
This notification indicates that the data is switched from the Ordinary backup CR-LSP to the primary CR-LSP.
hwMplsTunnelUp
hwMplsTunnelInterfaceName hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.13 
The hwMplsTunnelUp trap indicates that the staus of the tunnel changes into Up.
hwMplsTunnelDown
hwMplsTunnelInterfaceName hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.14 
The hwMplsTunnelDown trap indicates that the staus of the tunnel changes into Down.
hwMplsTunnelChangeBw
hwMplsTunnelInterfaceName hwMplsTunnelIfIndex hwMplsTunnelPreBandwidth hwMplsTunnelNextBandwidth
.1.3.6.1.4.1.2011.5.25.121.2.1.15 
This notification indicates that the bandwidth of the tunnel is changed.
hwMplsTunnelTpOamLossSD
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.16 
This object indicates that the loss ratio of the packets carried by the tunnel exceeded the first threshold.
hwMplsOamSDRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.17 
This object indicates that the loss ratio of the packets carried by the tunnel dropped below the first threshold.
hwMplsOamLoss
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.18 
This object indicates that TP OAM detected tunnel connectivity faults.
hwMplsOamLossRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.19 
This object indicates that TP OAM did not detect tunnel connectivity faults.
hwMplsStaticLspDown
hwStaticLspName hwStaticLspStatus IF-MIBifName hwStaticLspInIfIndex hwStaticLspInIfName hwStaticLspDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.2 
This notification indicates that the status of referred static LSP changes to Down.
hwMplsOamAis
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.20 
This object indicates that TP OAM detected an alarm indication signal.
hwMplsOamAisRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.21 
This object indicates that TP OAM no longer detected alarm indication signals.
hwMplsOamRdi
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.22 
This object indicates that TP OAM detected remote defects.
hwMplsOamRdiRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.23 
This object indicates that the remote defects detected by TP OAM were removed.
hwMplsOamMeg
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.24 
This object indicates that the names configured on the two ends of the tunnel are inconsistent.
hwMplsOamMegRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.25 
This object indicates that the names configured on the two ends of the tunnel now are consistent.
hwMplsOamMep
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto
.1.3.6.1.4.1.2011.5.25.121.2.1.26 
This object indicates that the MEP-IDs configured on the two ends of the tunnel are inconsistent.
hwMplsOamMepRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto
.1.3.6.1.4.1.2011.5.25.121.2.1.27 
This object indicates that the MEP-IDs configured on the two ends of the tunnel now are consistent.
hwMplsOamSF
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.28 
This object indicates that the loss ratio of the packets carried by the tunnel exceeded the second threshold in the local link.
hwMplsOamSFRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.29 
This object indicates that the loss ratio of the packets carried by the tunnel dropped below the second threshold in the local link.
hwMplsStaticCRLspUp
hwStaticLspName hwStaticLspStatus IF-MIBifName hwStaticLspInIfIndex hwStaticLspInIfName hwStaticLspDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.3 
This notification indicates that the status of referred static CR-LSP changes to Up.
hwMplsOamPeriod
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.30 
This object indicates that the TP OAM detection periods on the two ends of the tunnel are inconsistent.
hwMplsOamPeriodRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.31 
This object indicates that the TP OAM detection periods on the two ends of the tunnel now are consistent.
hwMplsOamLck
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.32 
This object indicates that TP OAM detected the service level of the tunnel has been locked.
hwMplsOamLckRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.33 
This object indicates that TP OAM detected the service level of the tunnel has not been locked.
hwMplsOamExcess
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.34 
This object indicates that MPLS OAM detected the tunnel received excess alarm.
hwMplsOamExcessRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.35 
This object indicates that MPLS OAM detected the tunnel received excess alarm end.
hwMplsOamMisMatch
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.36 
This object indicates that MPLS OAM detected the tunnel received MisMatch alarm.
hwMplsOamMisMatchRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.37 
This object indicates that MPLS OAM detected the tunnel received MisMatch alarm end.
hwMplsOamMisMerge
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.38 
This object indicates that MPLS OAM detected the tunnel received MisMerge alarm.
hwMplsOamMisMergeRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.39 
This object indicates that MPLS OAM detected the tunnel received MisMerge alarm end.
hwMplsStaticCRLspDown
hwStaticLspName hwStaticLspStatus IF-MIBifName hwStaticLspInIfIndex hwStaticLspInIfName hwStaticLspDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.4 
This notification indicates that the status of referred static CR-LSP changes to Down.
hwMplsOamUnknown
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.40 
This object indicates that MPLS OAM detected the tunnel received Unknown alarm.
hwMplsOamUnknownRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.41 
This object indicates that MPLS OAM detected the tunnel received Unknown alarm end.
hwMplsOamBDI
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.42 
This object indicates that MPLS OAM detected the tunnel received BDI alarm.
hwMplsOamBDIRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.43 
This object indicates that MPLS OAM detected the tunnel received BDI alarm end.
hwMplsOamFail
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.44 
This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm.
hwMplsOamFailRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.45 
This object indicates that MPLS OAM detected the tunnel received OAMFAIL alarm end.
hwMplsTunnelPrimaryUp
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.46 
This notification indicates that the status of the RSVP-TE Primary LSP changes to Up.
hwMplsTunnelPrimaryDown
hwMplsTunnelInterfaceName hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.47 
This notification indicates that the status of the RSVP-TE Primary LSP changes to Down.
hwMplsTunnelHotstandbyUp
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.48 
This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Up.
hwMplsTunnelHotstandbyDown
hwMplsTunnelInterfaceName hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.49 
This notification indicates that the status of the RSVP-TE Hot-standby LSP changes to Down.
hwMplsTeFrrProtAval
hwTunnelFrrRouteDBBypassIfIndex hwTunnelFrrRouteDBInnerLabel
.1.3.6.1.4.1.2011.5.25.121.2.1.5 
This notification indicates that the primary tunnel is bound to TE FRR bypass tunnel.
hwMplsTunnelOrdinaryUp
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.50 
This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Up.
hwMplsTunnelOrdinaryDown
hwMplsTunnelInterfaceName hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.51 
This notification indicates that the status of the RSVP-TE Ordinary LSP changes to Down.
hwMplsTunnelBesteffortUp
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.52 
This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Up.
hwMplsTunnelBesteffortDown
hwMplsTunnelInterfaceName hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.53 
This notification indicates that the status of the RSVP-TE Best-effort LSP changes to Down.
hwMplsTeAutoTunnelDownClear
MPLS-TE-STD-MIBmplsTunnelAdminStatus MPLS-TE-STD-MIBmplsTunnelOperStatus hwMplsTunnelIfName
.1.3.6.1.4.1.2011.5.25.121.2.1.54 
This notification indicates that the TE Auto tunnel Down alarm was cleared.
hwMplsTeAutoTunnelPrimaryDownClear
hwMplsTunnelInterfaceName
.1.3.6.1.4.1.2011.5.25.121.2.1.55 
This notification indicates that the Down alarm about the primary LSP in the TE Auto tunnel was cleared.
hwMplsTunnelBBSwitch
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.56 
This notification indicates that the primary CR-LSP is Down and the Best-effort backup CR-LSP is Up.
hwMplsTunnelBBResume
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.57 
This notification indicates that data is switched from the Best-effort backup CR-LSP to the primary CR-LSP.
hwMplsExtTunnelDown
hwMplsTunnelInterfaceName hwMplsTunnelType hwMplsTunnelAdminStatus hwMplsTunnelOperStatus hwMplsTunnelDownReason IF-MIBifName hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.58 
This notification indicates that the status of te tunnel changes to Down.
hwMplsExtTunnelDownClear
hwMplsTunnelInterfaceName hwMplsTunnelType hwMplsTunnelAdminStatus hwMplsTunnelOperStatus hwMplsTunnelDownReason IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.59 
This notification indicates that the down alarm of te tunnel was cleared.
hwMplsTeFrrProtNotAval
hwTunnelFrrRouteDBBypassIfIndex
.1.3.6.1.4.1.2011.5.25.121.2.1.6 
This notification indicates that the primary tunnel is unbound to bypass tunnel.
hwMplsOamLocalLock
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.60 
This object indicates that TP OAM detected the tunnel has been locked.
hwMplsOamLocalLockRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.61 
This object indicates that TP OAM detected the tunnel has not been locked.
hwMplsTunnelDelete
MPLS-TE-STD-MIBmplsTunnelAdminStatus MPLS-TE-STD-MIBmplsTunnelOperStatus hwMplsTunnelIfName
.1.3.6.1.4.1.2011.5.25.121.2.1.62 
This notification indicates that the mpls te tunnel was deleted.
hwMplsLspThresholdExceed
hwMplsLspProtocol hwMplsLspCurrentCount hwMplsLspThreshold hwMplsLspTotalCount
.1.3.6.1.4.1.2011.5.25.121.2.1.63 
This object indicates that lsp count has exceeded the threshold.
hwMplsLspThresholdExceedClear
hwMplsLspProtocol
.1.3.6.1.4.1.2011.5.25.121.2.1.64 
This object indicates that lsp count has resumed from exceeding the threshold.
hwMplsLspTotalCountExceed
hwMplsLspProtocol hwMplsLspTotalCount
.1.3.6.1.4.1.2011.5.25.121.2.1.65 
This object indicates that lsp count has reached the total count.
hwMplsLspTotalCountExceedClear
hwMplsLspProtocol
.1.3.6.1.4.1.2011.5.25.121.2.1.66 
This object indicates that lsp count has resumed from reaching the total count.
hwMplsDynamicLabelThresholdExceed
hwMplsDynamicLabelTotalCount hwMplsDynamicLabelCurrentCount hwMplsDynamicLabelThresholdUpperLimit hwMplsDynamicLabelThresholdLowerLimit
.1.3.6.1.4.1.2011.5.25.121.2.1.67 
This object indicates that label usage has exceeded the threshold.
hwMplsDynamicLabelThresholdExceedClear
hwMplsDynamicLabelTotalCount hwMplsDynamicLabelCurrentCount hwMplsDynamicLabelThresholdUpperLimit hwMplsDynamicLabelThresholdLowerLimit
.1.3.6.1.4.1.2011.5.25.121.2.1.68 
This object indicates that label usage has resumed from exceeding the threshold.
hwMplsDynamicLabelTotalCountExceed
hwMplsDynamicLabelTotalCount hwMplsDynamicLabelCurrentCount
.1.3.6.1.4.1.2011.5.25.121.2.1.69 
This object indicates that label count has reached the total count.
hwMplsTeFrrSwitch
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus hwMplsSessionTunnelId hwMplsLocalLspId hwMplsIngressLsrId hwMplsEgressLsrId
.1.3.6.1.4.1.2011.5.25.121.2.1.7 
This notification indicates that the primary tunnel is switches to the TE FRR bypass tunnel.
hwMplsDynamicLabelTotalCountExceedClear
hwMplsDynamicLabelTotalCount hwMplsDynamicLabelCurrentCount
.1.3.6.1.4.1.2011.5.25.121.2.1.70 
This object indicates that label usage count has resumed from reaching the total count.
hwMplsResourceThresholdExceed
hwMplsResourceType hwMplsResourceCurrentCount hwMplsResourceThreshold hwMplsResourceTotalCount
.1.3.6.1.4.1.2011.5.25.121.2.1.71 
This object indicates that the number of MPLS resources has exceeded the upper threshold.
hwMplsResourceThresholdExceedClear
hwMplsResourceType
.1.3.6.1.4.1.2011.5.25.121.2.1.72 
This object indicates that the number of MPLS resources has fallen below the lower threshold.
hwMplsResourceTotalCountExceed
hwMplsResourceType hwMplsResourceTotalCount
.1.3.6.1.4.1.2011.5.25.121.2.1.73 
This object indicates that the number of MPLS resources has reached the maximum number.
hwMplsResourceTotalCountExceedClear
hwMplsResourceType
.1.3.6.1.4.1.2011.5.25.121.2.1.74 
This object indicates that the number of MPLS resources fallen below the recovery number.
hwMplsLspLoopBack
hwMplsSessionTunnelId hwMplsLocalLspId hwMplsIngressLsrId hwMplsEgressLsrId hwMplsLspName
.1.3.6.1.4.1.2011.5.25.121.2.1.75 
This object indicates that the lsp was looped back.
hwMplsLspLoopBackClear
hwMplsSessionTunnelId hwMplsLocalLspId hwMplsIngressLsrId hwMplsEgressLsrId hwMplsLspName
.1.3.6.1.4.1.2011.5.25.121.2.1.76 
This object indicates that loopback of the LSP is restored.
hwMplsTunnelCommitLost .1.3.6.1.4.1.2011.5.25.121.2.1.77 
This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits only some MPLS tunnel configurations.
hwMplsTunnelCommitLostClear .1.3.6.1.4.1.2011.5.25.121.2.1.78 
This object indicates that, after the device saves MPLS TE tunnel configurations, the device commits all MPLS tunnel configurations.
hwMplsTunnelHotstandbySwitch
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.79 
This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP.
hwMplsTeFrrResume
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.8 
This notification indicates that the primary tunnel is switched back from the TE FRR bypass tunnel.
hwMplsTunnelHotstandbyResume
hwMplsTunnelInterfaceName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.80 
This notification indicates that the data is switched from the HSB CR-LSP to the primary CR-LSP.
hwMplsTunnelBfdPathMismatch
hwMplsTunnelInterfaceName hwMplsSessionTunnelId hwMplsLocalLspId hwMplsIngressLsrId hwMplsEgressLsrId hwMplsTunnelIfName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.81 
This notification indicates the forward primary LSP path is the same as the reverse hot-standby LSP path, and the reverse primary LSP path is the same as the forward hot-standby LSP path, causing path mismatches.
hwMplsTunnelBfdPathMismatchClear
hwMplsTunnelInterfaceName hwMplsSessionTunnelId hwMplsLocalLspId hwMplsIngressLsrId hwMplsEgressLsrId hwMplsTunnelIfName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.82 
This notification indicates that either or both path mismatches were rectified.
hwMplsTeLspBfdDown
hwMplsTunnelInterfaceName hwMplsTunnelLspType hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.83 
This notification indicates the bfd status of te-lsp changes to down.
hwMplsTeLspBfdDownClear
hwMplsTunnelInterfaceName hwMplsTunnelLspType hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.84 
This notification indicates that the down alarm of bfd was cleared.
hwMplsTunnelDelegationReturn
hwMplsTunnelInterfaceName
.1.3.6.1.4.1.2011.5.25.121.2.1.85 
This notification indicates that the delegation of Tunnel LSP is returned by server.
hwMplsTunnelDelegationReturnClear
hwMplsTunnelInterfaceName
.1.3.6.1.4.1.2011.5.25.121.2.1.86 
This notification indicates that the delegation of Tunnel LSP is returned by server.
hwMplsOamFDI
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelDirection IF-MIBifName hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.87 
This object indicates that MPLS OAM detected the tunnel received FDI alarm.
hwMplsOamFDIRecovery
hwMplsTunnelInterfaceName hwMplsTunnelSignalProto hwMplsTunnelDirection hwMplsTunnelSignalledTunnelName
.1.3.6.1.4.1.2011.5.25.121.2.1.88 
This object indicates that MPLS OAM detected the tunnel received FDI alarm end.
hwP2mpTeTunnelDown
hwMplsTunnelInterfaceName hwMplsP2mpId hwMplsTunnelDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.89 
This object indicates that the status of the P2MP tunnel changes to Down.
hwMplsTunnelHSBSwitch
hwMplsTunnelAdminStatus hwMplsTunnelOperStatus
.1.3.6.1.4.1.2011.5.25.121.2.1.9 
This notification indicates that the data is switched from the primary CR-LSP to the HSB CR-LSP.
hwP2mpTeTunnelDownClear
hwMplsTunnelInterfaceName hwMplsP2mpId hwMplsTunnelDownReason
.1.3.6.1.4.1.2011.5.25.121.2.1.90 
This object indicates that the alarm of the P2MP tunnel was cleared.
hwP2mpTeSubLspDown
hwMplsTunnelInterfaceName hwMplsTunnelLspType hwMplsP2mpId hwMplsTunnelDownReason hwMplsTunnelDownLSRID hwMplsTunnelDownIfIpAddrType hwMplsTunnelDownIfIpAddr
.1.3.6.1.4.1.2011.5.25.121.2.1.91 
This object indicates that the status of the P2MP tunnel sub-lsp changes to down.
hwBlockLabelThresholdExceed
hwBlockLabelTotalCount hwBlockLabelCurrentCount hwBlockLabelThresholdUpperLimit hwBlockLabelThresholdLowerLimit
.1.3.6.1.4.1.2011.5.25.121.2.1.92 
This object indicates that label usage has exceeded the threshold.
hwBlockLabelThresholdExceedClear
hwBlockLabelTotalCount hwBlockLabelCurrentCount hwBlockLabelThresholdUpperLimit hwBlockLabelThresholdLowerLimit
.1.3.6.1.4.1.2011.5.25.121.2.1.93 
This object indicates that label usage has resumed from exceeding the threshold.
hwBlockLabelTotalCountExceed
hwBlockLabelTotalCount hwBlockLabelCurrentCount
.1.3.6.1.4.1.2011.5.25.121.2.1.94 
This object indicates that label count has reached the total count.
hwBlockLabelTotalCountExceedClear
hwBlockLabelTotalCount hwBlockLabelCurrentCount
.1.3.6.1.4.1.2011.5.25.121.2.1.95 
This object indicates that label usage count has resumed from reaching the total count.
hwMplsInsecureAlgorithm
hwMplsFeatureName hwMplsAlgorithmName
.1.3.6.1.4.1.2011.5.25.121.2.1.96 
This object indicates that an insecure encryption algorithm is used, which has security risks.
hwMplsInsecureAlgorithmClear
hwMplsFeatureName hwMplsAlgorithmName
.1.3.6.1.4.1.2011.5.25.121.2.1.97 
This object indicates that the insecure encryption algorithm alarm is cleared.
hwMplsSlotResTotalCountExceed
hwMplsResourceType hwMplsChassis hwMplsSlot hwMplsResourceTotalCount
.1.3.6.1.4.1.2011.5.25.121.2.1.98 
This object indicates that the number of MPLS resources on the interface board has reached the maximum number.
hwMplsSlotResTotalCountExceedClear
hwMplsResourceType hwMplsChassis hwMplsSlot
.1.3.6.1.4.1.2011.5.25.121.2.1.99 
This object indicates that the number of MPLS resources on the interface board fallen below the recovery number.
hwMplsTunnelFrrConfigChange
hwMplsTunnelIfName hwMplsTunnelFrrConfigOper
.1.3.6.1.4.1.2011.5.25.121.2.3 
When the trap indicating that TE-Frr configuration of Tunnel is changed is sent, the cause for the change of TE-FRR configuration of Tunnel is displayed.
hwMplsRingSwitch
hwMplsRingNodeID hwMplsRingName hwMplsRingDirection hwMplsRingSwitchReason
.1.3.6.1.4.1.2011.5.25.121.7.2.1 
The notification indicates that the MPLS ring switched.
hwMplsRingEastOamRDIClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.10 
The notification indicates that the hwMplsRingEastOamRDI alarm was cleared.
hwMplsRingWestOamUnexpectedMEG
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.11 
The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the west of the MPLS ring.
hwMplsRingWestOamUnexpectedMEGClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.12 
The notification indicates that the hwMplsRingWestOamUnexpectedMEG alarm was cleared.
hwMplsRingEastOamUnexpectedMEG
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.13 
The notification indicates that a CCM frame carrying a correct MEG level but incorrect MEG ID is received in the east of the MPLS ring.
hwMplsRingEastOamUnexpectedMEGClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.14 
The notification indicates that the hwMplsRingEastOamUnexpectedMEG alarm was cleared.
hwMplsRingWestOamUnexpectedPeriod
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.15 
The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, 
and MEP ID but incorrect period value is received in the west MEP of the MPLS ring.
hwMplsRingWestOamUnexpectedPeriodClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.16 
The notification indicates that the hwMplsRingWestOamUnexpectedPeriod alarm was cleared.
hwMplsRingEastOamUnexpectedPeriod
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.17 
The notification indicates that a CCM frame carrying a correct MEG level, MEG ID, 
and MEP ID but incorrect period value is received in the east MEP of the MPLS ring.
hwMplsRingEastOamUnexpectedPeriodClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.18 
The notification indicates that the hwMplsRingEastOamUnexpectedPeriod alarm was cleared.
hwMplsRingWestOamExcess
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.19 
The notification indicates that five or more CV/FFD packets are correctly received 
within three consecutive cycles in the west of the MPLS ring.
hwMplsRingResume
hwMplsRingNodeID hwMplsRingName hwMplsRingDirection
.1.3.6.1.4.1.2011.5.25.121.7.2.2 
The notification indicates that the MPLS ring resumed.
hwMplsRingWestOamExcessClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.20 
The notification indicates that the hwMplsRingWestOamExcess alarm was cleared.
hwMplsRingEastOamExcess
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.21 
The notification indicates that five or more CV/FFD packets are correctly received 
within three consecutive cycles in the east of the MPLS ring.
hwMplsRingEastOamExcessClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.22 
The notification indicates that the hwMplsRingEastOamExcess alarm was cleared.
hwMplsRingWestOamSD
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.23 
The notification indicates that the number of packets for connectivity check received 
in the west of the MPLS ring is smaller than the SD threshold.
hwMplsRingWestOamSDClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.24 
The notification indicates that the hwMplsRingWestOamSD alarm was cleared.
hwMplsRingEastOamSD
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.25 
The notification indicates that the number of packets for connectivity check received 
in the east of the MPLS ring is smaller than the SD threshold.
hwMplsRingEastOamSDClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.26 
The notification indicates that the hwMplsRingEastOamSD alarm was cleared.
hwMplsRingWestOamSF
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.27 
The notification indicates that the number of packets for connectivity check received in 
the west of the MPLS ring is smaller than the SF threshold.
hwMplsRingWestOamSFClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.28 
The notification indicates that the hwMplsRingWestOamSF alarm was cleared.
hwMplsRingEastOamSF
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.29 
The notification indicates that the number of packets for connectivity check received in 
the east of the MPLS ring is smaller than the SF threshold.
hwMplsRingWestOamLoss
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.3 
The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the west of the MPLS ring.
hwMplsRingEastOamSFClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.30 
The notification indicates that the hwMplsRingEastOamSF alarm was cleared.
hwMplsRingWestAPSSwitch
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.31 
The notification indicates that APS switching occurs in the west of the MPLS ring.
hwMplsRingWestAPSResume
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.32 
The notification indicates that APS switches back in the west of the MPLS ring.
hwMplsRingEastAPSSwitch
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.33 
The notification indicates that APS switching occurs in the east of the MPLS ring.
hwMplsRingEastAPSResume
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.34 
The notification indicates that APS switches back in the east of the MPLS ring.
hwMplsRingWestAPSSwitchFail
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.35 
The notification indicates that the remote APS switching fails in the west of the MPLS ring.
hwMplsRingWestAPSSwitchFailClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.36 
The notification indicates that the hwMplsRingWestAPSSwitchFail alarm was cleared.
hwMplsRingEastAPSSwitchFail
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.37 
The notification indicates that the remote APS switching fails in the east of the MPLS ring.
hwMplsRingEastAPSSwitchFailClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.38 
The notification indicates that the hwMplsRingEastAPSSwitchFail alarm was cleared.
hwMplsRingWestAPSLost
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.39 
The notification indicates that APS packets are missing in the west of the MPLS ring.
hwMplsRingWestOamLossClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.4 
The notification indicates that the hwMplsRingWestOamLoss alarm was cleared.
hwMplsRingWestAPSLostClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.40 
The notification indicates that the hwMplsRingWestAPSLost alarm was cleared.
hwMplsRingEastAPSLost
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.41 
The notification indicates that APS packets are missing in the east of the MPLS ring.
hwMplsRingEastAPSLostClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.42 
The notification indicates that the hwMplsRingEastAPSLost alarm was cleared.
hwMplsRingWestAPSMismatch
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.43 
The notification indicates that the source ID carried by APS packets received in the west 
is different from the peer source ID configured for the west state machine on the MPLS ring.
hwMplsRingWestAPSMismatchClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.44 
The notification indicates that the hwMplsRingWestAPSMismatch alarm was cleared.
hwMplsRingEastAPSMismatch
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.45 
The notification indicates that the source ID carried by APS packets received in the east 
is different from the peer source ID configured for the east state machine on the MPLS ring.
hwMplsRingEastAPSMismatchClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.46 
The notification indicates that the hwMplsRingEastAPSMismatch alarm was cleared.
hwMplsRingWestOamUnexpectedMEP
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.47 
The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the west of the MPLS ring.
hwMplsRingWestOamUnexpectedMEPClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.48 
The notification indicates that the hwMplsRingWestOamUnexpectedMEP alarm was cleared.
hwMplsRingEastOamUnexpectedMEP
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.49 
The notification indicates that a CCM frame carrying a correct MEG level and correct MEG ID but not the expected MEP ID is received in the east of the MPLS ring.
hwMplsRingEastOamLoss
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.5 
The notification indicates that no expected CV/FFD packet is received for three consecutive cycles in the east of the MPLS ring.
hwMplsRingEastOamUnexpectedMEPClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.50 
The notification indicates that the hwMplsRingEastOamUnexpectedMEP alarm was cleared.
hwMplsRingEastOamLossClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.6 
The notification indicates that the hwMplsRingEastOamLoss alarm was cleared.
hwMplsRingWestOamRDI
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.7 
The notification indicates that RDI packets are received in the west of the MPLS ring, indicating that a fault occurs on the forward ring.
hwMplsRingWestOamRDIClear
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.8 
The notification indicates that the hwMplsRingWestOamRDI alarm was cleared.
hwMplsRingEastOamRDI
hwMplsRingName
.1.3.6.1.4.1.2011.5.25.121.7.2.9 
The notification indicates that RDI packets are received in the east of the MPLS ring, indicating that a fault occurs on the forward ring.