HUAWEI-CLK-MIB Table View

Clock Source Management Table.
This table is used to add or delete the clock source and query
the status of the clock source.
The index of this table is hwClkInIndex, which is the clock source ID.

hwClockInManageEntry row .1.3.6.1.4.1.2011.6.25.1.1.1

Clock Source Management Table.
This table is used to add or delete the clock source and query
the status of the clock source.
The index of this entry is hwClkInIndex, which is the clock source ID.

Indexes

hwClkInIndex

Column	Syntax	OID
hwClkInIndex Clock source index: ranging from 0 to 9. The value 255 indicates the local clock source. Range: 0-9 | 255	Integer32 Constraints: range: 255-255 range: 0-9	.1.3.6.1.4.1.2011.6.25.1.1.1.1
hwClkInPostion The ifIndex of physical position of clock source. If the clock source isn't a sysline clock, the value will be 0xFFFFFFFFFFFFFF. The first byte indicates the NO. of CESoP index. The second byte indicates the NO. of fram…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.1.1.2
hwClkInWorkMode Clock source type. Includes the line clock source, BITS clock source, and local surge source. If it is line clock source of a CES port, the clock source type may be CES line or CES SRTS clock source. If it is BITS cloc…	Enumerationr/w Enumerated Values: 1 none 2 sysLine 3 cesLine 4 cesSrts 5 e1Bits0 6 e1Bits1 7 f2mhzBits0 8 f2mhzBits1 9 msuSdh 10 msuTdm 11 localSurge 12 xpm8k 13 gPON 14 pkt1588 15 pw 16 copa 17 adaptClock 18 aCMClock 19 t1Bits0 20 t1Bits1 21 system 22 acr1588 23 syncEth 24 pvx2m	.1.3.6.1.4.1.2011.6.25.1.1.1.3
hwClkInOperStatus Clock source state. Options: 1.none(1) - indicates that the clock source index isn't configured 2.normal(2) - indicates that the state of the clock source is active 3.failure(3) - indicates that the stat…	Enumeration Enumerated Values: 1 none 2 normal 3 failure 4 failureLoss 5 failureEFD	.1.3.6.1.4.1.2011.6.25.1.1.1.4
hwClkInRowStatus Clock Source operation: A user can add a clock source or clear a clock source. After a user adds a clock source,the clock works in trace mode. After a user clears a clock source, the clock works in srystal mode. To set …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.25.1.1.1.5
hwClkInBitsImpedance BITS clock impedance type.The impedance value must be set when the clock source is a bits clock. Options: 1. bitsImpedance75ohm(1) - indicates that the impedance of this BITS clock source is 75 ohm 2. bitsImpedan…	Enumerationr/w Enumerated Values: 1 bitsImpedance75ohm 2 bitsImpedance120ohm 3 bitsImpedance110ohm 4 bitsImpedance100ohm 255 bitsImpedanceNone	.1.3.6.1.4.1.2011.6.25.1.1.1.6
hwClkInBitsType BITS clock type: Options: 1.bitsType2MHz(1) - indicates that the BITS clock type is 2MHz 2.bitsType2Mbps(2) - indicates that the BITS clock type is 2bps 3.bitsType64K(3) - indicates that the BITS cl…	Enumerationr/w Enumerated Values: 1 bitsType2MHz 2 bitsType2Mbps 3 bitsType64K 4 bitsType1544bps 255 bitsTypeNone	.1.3.6.1.4.1.2011.6.25.1.1.1.7
hwClkInQL Clock source quality level: Options: 1. qlPRC(2) - indicates that primary reference clock 2. qlSsuA(4) - indicates that the clock signal comes from class I or class V sub-clock prescribed on …	Enumerationr/w Enumerated Values: 2 qlPRC 4 qlSsuA 8 qlSsuB 11 qlSEC 15 qlDNU 255 qlCLEAR	.1.3.6.1.4.1.2011.6.25.1.1.1.8
hwClkInFaultRecord Clock source fault record. Options: 1.noFaultRecord(1) - indicates that there is no fault record 2.faultRecord(2) - indicates that the clock source had a fault record	Enumeration Enumerated Values: 1 noFaultRecord 2 faultRecord	.1.3.6.1.4.1.2011.6.25.1.1.1.9
hwClkInClearFaultRecord Clear fault record of one clock source. Options: 1.clearFaultRecord(1) -Clears fault records	Enumerationr/w Enumerated Values: 1 clearFaultRecord	.1.3.6.1.4.1.2011.6.25.1.1.1.10
hwClkLockState Clock lock state. Options: 1.locked(1) - indicates that the clock is locked 2.unlocked(2) - indicates that the clock is unlocked	Enumeration Enumerated Values: 1 locked 2 unlocked	.1.3.6.1.4.1.2011.6.25.1.1.1.11
hwClkFreqDeviation Clock source freq-deviation-value The value is ten times of actual frequency deviation value Unit: 0.1ppm The invalid value is 0x7fffffff	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.1.1.12

Clock Out Management Table.
This table is used to configure and query the priority of the clock source,
and query the index of the currently-output clock source, and the working mode (the output mode)
of the current clock.The indexes of this table are hwClkInIndex and hwClkOutIndex.
hwClkInIndex comes from hwClockInManageTable and is the index of the input clock source.
hwClkOutIndex is the type of the output clock source.
The output clock source can be of the SDH, TDM, 8K, or 19M type.

hwClockOutManageEntry row .1.3.6.1.4.1.2011.6.25.1.2.1

Clock Out Management Table.
This table is used to configure and query the priority of the clock source,
and query the index of the currently-output clock source, and the working mode (the output mode)
of the current clo…

Indexes

hwClkInIndex hwClkOutIndex

Column	Syntax	OID
hwClkOutIndex Index of clock out table. Its meaning is the same as hwClkOutType. The clock out index must be 8k in UA system and must be SDH or TDM in MD/MA system during the setting of priority for a clock source. Range: 1 - 7	Integer32 Constraints: range: 1-7	.1.3.6.1.4.1.2011.6.25.1.2.1.1
hwClkOutType Clock out type. Currently, there are seven types: SDH, TDM, system, 19 MHzm, systemObsolete, external and external1. Options: 1.sdh(1) - indicates that output clock type is SDH 2.tdm(2) -…	Enumeration Enumerated Values: 1 sdh 2 tdm 3 system 4 clk19M 5 systemObsolete 6 external 7 external1	.1.3.6.1.4.1.2011.6.25.1.2.1.2
hwClkOutPriority Clock source priority. The priority ranges from 0 to 9 in a descending order. If the value is 255 in the get operation, it indicates that the priority of the clock source isn't configured.	Integer32r/w Constraints: range: 255-255 range: 0-9	.1.3.6.1.4.1.2011.6.25.1.2.1.3
hwClkOutWorkMode Clock out working mode. Options: 1.trace(1) - indicates that the clock is working in tracing mode 2.surge(2) - indicates that the clock is working in surge mode 3.keep(3) - indicates that the clock is…	Enumeration Enumerated Values: 1 trace 2 surge 3 keep 4 snap 5 thirdsurge	.1.3.6.1.4.1.2011.6.25.1.2.1.4
hwClkOutOperStatus Clock source Out state. It indicates whether the clock source is the output clock of the system: 1 indicates yes, and 2 indicates no. Options: 1.yes(1) - indicates that the clock source is the output clock…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.6.25.1.2.1.5

Clock output port management table.
This table is used to enable or disable the output
port and query the status of the output port. The index of this table is
hwClkOutputPostion, indicating the ifIndex of physical position of the clock source.

hwClockOutPortManageEntry row .1.3.6.1.4.1.2011.6.25.1.4.1

Clock output port management table.
This table is used to enable or disable the output
port and query the status of the output port. The index of this entry is
hwClkOutputPostion, indicating the ifIndex of physical posi…

Indexes

hwClkOutputPostion

Column	Syntax	OID
hwClkOutputPostion The index of physical position of the clock source. The highest byte is useless. The second byte describes the frame ID. The third byte describes the slot ID. The lowest byte describes the port ID. The following shows h…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.4.1.1
hwClkOutPortEnable Clock output port switch. Options: 1. enable(0) - indicates that clock source output of this BITS port is enabled 2. disable(1) - indicates that clock source output of this BITS port is disabled	Enumerationr/w Enumerated Values: 0 enable 1 disable	.1.3.6.1.4.1.2011.6.25.1.4.1.2
hwSsmQlOutPortEnable SSM QL output mode. Options: 1.enable(1) - indicates that SSM QL output of the port is enabled 2.disable(2) - indicates that SSM QL output of the port is disabled	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.1.4.1.3

Clock 1588 source management table. This table is used to manage
the 1588 clock source.
The index of this table is hw1588ClkInIndex, which is the ID of the 1588 clock source.

hwClock1588ManageEntry row .1.3.6.1.4.1.2011.6.25.1.5.1

Clock 1588 source management table. This table is used to manage
the 1588 clock source.
The index of this entry is hw1588ClkInIndex, which is the ID of the 1588 clock source.

Indexes

hw1588ClkInIndex

Column	Syntax	OID
hw1588ClkInIndex Clock 1588 source index. Range: 0-9	Integer32 Constraints: range: 0-9	.1.3.6.1.4.1.2011.6.25.1.5.1.1
hw1588ClkInPostion The index of physical position of clock 1588 source. The highest byte is useless. The second byte describes the frame ID. The third byte describes the slot ID. The lowest byte describes the port ID. The following shows …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.5.1.2
hw1588ClkPriority Clock 1588 source priority. The priority ranges from 0 to 9 in a descending order.If the value is 255 in the get operation, it indicates that the priority of the ptp source isn't configured.	Integer32r/w Constraints: range: 255-255 range: 0-9	.1.3.6.1.4.1.2011.6.25.1.5.1.3
hw1588ClkInOperStatus Clock 1588 source status: Options: 1.none(1) - indicates that the clock source index is not configured 2.normal(2) - indicates that the status of clock source is normal 3.failure(3)- indicates that the status of clock…	Enumeration Enumerated Values: 1 none 2 normal 3 failure	.1.3.6.1.4.1.2011.6.25.1.5.1.4
hw1588ClkInRowStatus Clock 1588 source operation includes adding and deleting clock 1588 source. If the value is set to 4, it indicates that a clock 1588 source is created. If the value is set to 6, it indicates that an existing clock sourc…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.25.1.5.1.5
hw1588ClkReqSendTimeIntervalobsolete 1588 Req send time interval. Options: 1.1/1024s( 1) - indicates that the time interval is 1/1024s 2.1/512s( 2) - indicates that the time interval is 1/512s 3.1/256s( 3) - indicates that the time interval is 1/256s …	Integer32r/w Constraints: range: 1-21	.1.3.6.1.4.1.2011.6.25.1.5.1.6
hw1588ClkDomainNumberobsolete 1588 clock domain number: Range: 0-255 Default: 0	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.5.1.7
hw1588ClkPtpPEModeobsolete PTP MODE,default value is e2e(2). Options: 1. p2p(1) - indicates that the 1588 clock Ptp Pe Mode is p2p 2. e2e(2) - indicates that the 1588 clock Ptp Pe Mode is e2e	Enumerationr/w Enumerated Values: 1 p2p 2 e2e	.1.3.6.1.4.1.2011.6.25.1.5.1.8
hw1588ClkPtpMsgFormatobsolete PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet 2. ptpip(2) - indicates that the PTP message is encapsulat…	Enumerationr/w Enumerated Values: 1 ptpeth 2 ptpip	.1.3.6.1.4.1.2011.6.25.1.5.1.9
hw1588ClkPtpLineWarpModeobsolete PTP line warp mode, the default value is length(1). Options: 1. length(1) - indicates that the warp is represented by length 2. time(2) - indicates that the warp is represented by time	Enumerationr/w Enumerated Values: 1 length 2 time	.1.3.6.1.4.1.2011.6.25.1.5.1.10
hw1588ClkPtpLineWarpDirectobsolete PTP line warp direct, the default value is positive(1). Options: 1. positive(1) - indicates that the warp is in the positive direction 2. negative(2) - indicates that the warp is in the negative direction	Enumerationr/w Enumerated Values: 1 positive 2 negative	.1.3.6.1.4.1.2011.6.25.1.5.1.11
hw1588ClkPtpLineWarpValueobsolete PTP Line Warp Value: IF warp mode is length(1), the range is 0~14562m. If warp mode is time(2), the range is 0~65529 ns.	Integer32r/w Constraints: range: 0-65529	.1.3.6.1.4.1.2011.6.25.1.5.1.12
hw1588ClkPtpTimeSourceIDobsolete PTP source port ID: It is 10 bytes in length and the default value is 0.	OctetStringr/w Constraints: range: 20-20	.1.3.6.1.4.1.2011.6.25.1.5.1.13
hw1588ClkPtpVlanobsolete PTP Vlan: Range: 0-4094. Default: 1.	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.6.25.1.5.1.14
hw1588ClkPtpInfoModeobsolete PTP info mode,default value is multicast(1). Options: 1. multicast(1) - indicates that the PTP info mode is multicast. 2. unicast(2) - indicates that the PTP info mode is unicast.	Enumerationr/w Enumerated Values: 1 muticast 2 unicast	.1.3.6.1.4.1.2011.6.25.1.5.1.15
hw1588ClkPtpAnnounceTimeoutobsolete Announce timeout: Range: 1-1048576 ms Range: 1 - 1048576 Default: 128 ms	Integer32r/w Constraints: range: 2-1048576	.1.3.6.1.4.1.2011.6.25.1.5.1.16
hw1588ClkGMClockIDobsolete Grandmaster clock ID.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2011.6.25.1.5.1.17
hw1588ClkAnnounceSendTimeIntervalobsolete 1588 announce send time interval,the default value is 1/8s(8). Options: 1. 1/1024s(1) - indicates that the time interval is 1/1024s 2. 1/512s (2) - indicates that the time interval is 1/512s 3. 1/256s (3) - indicate…	Integer32r/w Constraints: range: 1-21	.1.3.6.1.4.1.2011.6.25.1.5.1.18
hw1588ClkSyncSendTimeIntervalobsolete 1588 sync send time interval,the default value is 1/8s(8). Options: 1. 1/1024s(1) - indicates that the time interval is 1/1024s 2. 1/512s (2) - indicates that the time interval is 1/512s 3. 1/256s (3) - indicates tha…	Integer32r/w Constraints: range: 1-21	.1.3.6.1.4.1.2011.6.25.1.5.1.19
hw1588ClkPtpLockState 1588 port lock state. Options: 1. locked(1) - indicates that the clock is locked 2. unlocked(2) - indicates that the clock is unlocked	Enumeration Enumerated Values: 1 locked 2 unlocked	.1.3.6.1.4.1.2011.6.25.1.5.1.20
hw1588ClkInWorkMode Time source type. Options: 1. ptp(1) - indicates that time source that need to specify frame/slot/port 2. bits(2) - indicates that time source of a BITS port	Enumerationr/w Enumerated Values: 1 ptp 2 bits	.1.3.6.1.4.1.2011.6.25.1.5.1.21
hw1588ClkInSelectStatus Time source select status. Options: 1. yes(1) - indicates that the time source is selected as the current time source. 2. no(2) - indicates that the time source isn't selected as the current time source.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.2011.6.25.1.5.1.22

Clock transaction management table.
This table is used to configure and query the clock transmission.
The index of this table is hwClkTransID, which is also the ID of
the clock transmission.

hwClockTransManageEntry row .1.3.6.1.4.1.2011.6.25.1.6.1

Clock transaction management table.
This table is used to configure and query the clock transmission.
The index of this entry is hwClkTransID, which is also the ID of
the clock transmission.

Indexes

hwClkTransID

Column	Syntax	OID
hwClkTransID Clock transaction ID: The range is from 1 to 32. Range: 1 - 32	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.25.1.6.1.1
hwClkLocalIP IP address of a local device	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.6.1.2
hwClkVlanTag VLAN tag. If the value is 0, it indicates that there is no VLAN tag in clock packages. Range: 0 - 4095	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.2011.6.25.1.6.1.3
hwClkRemoteIP IP address of remote device	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.6.1.4
hwClkRowStatus Clock transaction operation. If the value is set to 4, it indicates that a clock transmission configuration is added. If the value is set to 6, it indicates that an existing clock transmission configuration is deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.25.1.6.1.5

Clock ACM source IP table.
The index of this table is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

hwACMClockIPEntry row .1.3.6.1.4.1.2011.6.25.1.8.1

Clock ACM source IP table.
The index of this entry is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

Indexes

hwACMClockIPIndex

Column	Syntax	OID
hwACMClockIPIndex Currently, it supports only ACM IP address but it can be extended in the future. Range: 0 - 2147483647	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.2011.6.25.1.8.1.1
hwACMClockIP ACM cLOCK switch IP address at layer 3. Range: 0.0.0.0-255.255.255.255	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.8.1.2
hwACMClkPostion Physical position of clock source ACM IP address. The highest byte is useless. The second byte describes the frame ID, The third byte describes the slot ID. The lowest byte is useless. The following shows how to use par…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.8.1.3
hwACMClockIPRowStatus Rowstatus of the ACM clock IP address. Options: 1. createAndGo(4) - Creates an ACM clock IP address 2. destroy(6) - Destroys an ACM clock IP address.	Enumerationr/w Enumerated Values: 4 createAndGo 6 destroy	.1.3.6.1.4.1.2011.6.25.1.8.1.4

Time management table.
The index of this table is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

hwBitsPortManageEntry row .1.3.6.1.4.1.2011.6.25.1.9.1

Time management table.
The index of this entry is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwBitsPortClkWorkMode Port work mode of BITS clock. Options: 1. e1(1) - indicates that E1 type of clock input/output. 2. t1(2) - indicates that T1 type of clock input/output 3. f2mhz(3) - indicates that 2MHz type of clock i…	Enumerationr/w Enumerated Values: 1 e1 2 t1 3 f2mhz 255 invalid	.1.3.6.1.4.1.2011.6.25.1.9.1.1
hwBitsPortTimeWorkMode Time work mode of Bits clock. Options: 1.ppsubx(1) - indicates that 1pps+ubx type of time input/output 2.dcls(2) - indicates that DCLS type of time input/output 3.invalid(255) - indicates th…	Enumerationr/w Enumerated Values: 1 ppsubx 2 dcls 3 ppsnmea 255 invalid	.1.3.6.1.4.1.2011.6.25.1.9.1.2
hwBitsPortIOStatus Time interface direction mode. Options: 1.input(1) - indicates that the mode of time interface is input 2.output(2) - indicates that the mode of time interface source is output 3.invalid(255) - indicates that tim…	Enumerationr/w Enumerated Values: 1 input 2 output 255 invalid	.1.3.6.1.4.1.2011.6.25.1.9.1.3
hwPtpBitsClockAccuracy The clockAccuracy characterizes a clock for the purpose of the best master clock (BMC) algorithm. The value of this attribute shall be estimated by the clock to a precision consistent with the value of the selected enum…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.9.1.4
hwPtpBitsClockClass The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency distributed by the grandmaster clock. BC: Range: 0-255 1. 6 - indicates that shall desi…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.9.1.5
hwPtpBitsPriority1 The attribute priority1 is used in the execution of the best master clock algorithm. Lower values take precedence. Range: 0-255 Default: 128 This attribute is invalid in T-BC mode.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.9.1.6
hwPtpBitsPriority2 The attribute priority2 is used in the execution of the best master clock algorithm. Lower values take precedence. Range: 0-255 Default: 128	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.9.1.7
hwPtpBitsTimeSource This attribute indicates the source of time used by the grandmaster clock. Options: 1.atomicClock(16) - indicates that any device, or device directly connected to such a device, that is…	Enumerationr/w Enumerated Values: 16 atomicClock 32 gPS 48 terrestrialRadio 64 ptp 80 ntp 96 handSet 144 other 160 internalOscillator	.1.3.6.1.4.1.2011.6.25.1.9.1.8
hwBits1ppsDelayDirection Delay mode of the time signal on the BITS port. Options: 1.receive(1) - indicates that delay mode is receive 2.send(2) - indicates that delay mode is send	Enumerationr/w Enumerated Values: 1 receive 2 send	.1.3.6.1.4.1.2011.6.25.1.9.1.9
hwBits1ppsDelayValue Adjusted delay of the time signal on the BITS port. In receive mode, it ranges from 0 to 200000. In send mode, it ranges from 0 to 1600. Unit:ns Default: 0	Integer32r/w Constraints: range: 0-200000	.1.3.6.1.4.1.2011.6.25.1.9.1.10
hwPtpBitsPortLocalPriority In T-BC mode, the local priority of the BITS port is configured to calculate the optimum master clock. The smaller the value, the higher the priority. Range: 1-255 Default value: 128 This attribute is i…	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.2011.6.25.1.9.1.11
hwPtpBitsOffsetScaledLogVariance Indicates estimate of the variations of the local clock from a linear timescale. In T-BC mode, it can only be 0x4E5D (default) and 0xFFFF. This attribute is invalid in BC mode.	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.2011.6.25.1.9.1.12

1588 clock PTP port management table.
The index of this table is ifIndex which comes from ifTable.
The method for using ifIndex is provided in ifIndex's mib description.

hw1588ClkPtpPortManageEntry row .1.3.6.1.4.1.2011.6.25.1.10.1

1588 clock PTP port management table.
The index of this entry is ifIndex which comes from ifTable.
The method for using ifIndex is provided in ifIndex's mib description.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hw1588ClkPtpPortState 1588 port status. Options: 1.initializing(1) - indicates that the state of 1588 clock PTP port is initializing 2.faulty(2) - indicates that the state of 1588 clock PTP port is faulty 3.disabled(3) - indicat…	Enumeration Enumerated Values: 1 initializing 2 faulty 3 disabled 4 listening 5 premaster 6 master 7 passive 8 uncalibrated 9 slave 255 invalid	.1.3.6.1.4.1.2011.6.25.1.10.1.1
hw1588ClkPtpPortEnable Enable or disable the 1588 function of PTP port. Options: 1. enable(1) -Enable the 1588 function of this port 2. disable(2) -Disable the 1588 function of this port Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.1.10.1.2
hw1588ClkPtpPortVlanobsolete PTP VLAN. Range: 0 - 4094	Integer32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.2011.6.25.1.10.1.3
hw1588ClkPtpPortSourceIpobsolete PTP port source IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.10.1.4
hw1588ClkPtpPortMsgFormat PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet 2. ptpip(2) - indicates that the PTP message is encapsulat…	Enumeration Enumerated Values: 1 ptpeth 2 ptpip	.1.3.6.1.4.1.2011.6.25.1.10.1.5
hw1588ClkPtpPortInfoMode PTP info mode. Default: multicast(1) Options: 1. multicast(1) - indicates that the Info mode of the 1588 clock PTP port is multicast 2. unicast(2) - indicates that the Info mode of the 1588 clock PTP port is unicast	Enumeration Enumerated Values: 1 multicast 2 unicast	.1.3.6.1.4.1.2011.6.25.1.10.1.6
hw1588ClkPtpPortAnnounceSendTimeInterval Interval for sending announce packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 2. 1/8s (7) - indicates that the time interval is 1/8s 3. 1/4s (8) - indi…	Integer32r/w Constraints: range: 6-14	.1.3.6.1.4.1.2011.6.25.1.10.1.7
hw1588ClkPtpPortSyncSendTimeInterval Interval for sending sync packets. BC: Default: 1/16s(6) Options: 1. 1/256s (2) - indicates that the time interval is 1/256s 2. 1/128s (3) - indicates that the time interval is 1/128s 3. 1/64s (4) - indi…	Integer32r/w Constraints: range: 2-11	.1.3.6.1.4.1.2011.6.25.1.10.1.8
hw1588ClkPtpPortReqSendTimeInterval Interval for sending req packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 3. 1/8s (7) - indicates that the time interval is 1/8s 3. 1/4…	Integer32r/w Constraints: range: 6-14	.1.3.6.1.4.1.2011.6.25.1.10.1.9
hw1588ClkPtpPortLineWarpMode Type of the asymmetric transmission windage for optical fibers, the default value is length(1). Options: 1. length(1) - indicates that the warp is represented by length 2. time(2) - indicates that the warp is represen…	Enumerationr/w Enumerated Values: 1 length 2 time	.1.3.6.1.4.1.2011.6.25.1.10.1.10
hw1588ClkPtpPortLineWarpDirect Fiber windage direction, the default value is positive(1). Options: 1. positive(1) - indicates that the warp is in the positive direction 2. negative(2) - indicates that the warp is in the negative direction	Enumerationr/w Enumerated Values: 1 positive 2 negative	.1.3.6.1.4.1.2011.6.25.1.10.1.11
hw1588ClkPtpPortLineWarpValue PTP line warp value. If warp mode is length(1), the range is 0~14562m. If warp mode is time(2) the range is 0~65529 ns.	Integer32r/w Constraints: range: 0-65529	.1.3.6.1.4.1.2011.6.25.1.10.1.12
hw1588ClkPtpPortAnnounceTimeout Announce timeout specifies that the interval for receiving announce packets on the port. BC: Range: 2 - 255 Default value: 3 T-BC: Range: 3 - 255 Default value: 3	Integer32r/w Constraints: range: 2-255	.1.3.6.1.4.1.2011.6.25.1.10.1.13
hw1588ClkPtpPortDomainNumobsolete 1588 clock domain number. Range: 0-255 Default value: 0	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.1.10.1.14
hw1588ClkDSCPobsolete 1588 clock DSCP:0-63.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.25.1.10.1.15
hw1588ClkVlanPRIobsolete 1588 clock Vlan priority:0-7.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.25.1.10.1.16
hw1588ClkPtpPortDelayMechanism Delay measurement mechanism. BC: Options: 1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism. 2.pdelayMechanism(2) - indicates that delay mechanism is pdelay-mechanism. Default: delay…	Enumerationr/w Enumerated Values: 1 delayMechanism 2 pdelayMechanism	.1.3.6.1.4.1.2011.6.25.1.10.1.17
hw1588ClkPtpPortMacDestinationMac Destination MAC address of MAC-encapsulated packets. BC: When the delay measurement mechanism is delay, the default destination MAC address is 011b-1900-0000. When the delay measurement mechanism is pdelay, the …	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.25.1.10.1.18
hw1588ClkPtpPortUdpDestinationMac Destination MAC address of UDP-encapsulated packets. When the delay measurement mechanism is delay, the default destination MAC address is 0100-5e00-0181. When the delay measurement mechanism is pdelay, the default dest…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.25.1.10.1.19
hw1588ClkPtpPortUdpEgressSourceIp Source IP address of UDP-encapsulated packets. Default:0.0.0.0 This attribute is invalid in T-BC mode.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.10.1.20
hw1588ClkPtpPortUdpEgressDestinationIp Destination IP address of UDP-encapsulated packets. When the delay measurement mechanism is delay, the default destination IP address is 224.0.1.129. When the delay measurement mechanism is pdelay, the default destinati…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.10.1.21
hw1588ClkPtpPortUdpVlanPRI VLAN priority of UDP-encapsulated packets. Default:7 Invalid(-1) This attribute is invalid in T-BC mode.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.6.25.1.10.1.22
hw1588ClkPtpPortMacVlanPRI VLAN priority of MAC-encapsulated packets. Default:7 Invalid(-1) This attribute is invalid in T-BC mode.	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.6.25.1.10.1.23
hw1588ClkPtpPortUdpEgressDscp DSCP of UDP-encapsulated packets. Default:56 Invalid(-1) This attribute is invalid in T-BC mode.	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.6.25.1.10.1.24
hw1588ClkPtpPortClockStep Clock step mode. Options: 1.oneStep(1) - indicates that clock step mode is one-step. 2.twoStep(2) - indicates that clock step mode is two-step. Default: oneStep(1)	Enumerationr/w Enumerated Values: 1 oneStep 2 twoStep	.1.3.6.1.4.1.2011.6.25.1.10.1.25
hw1588ClkPtpPortUdpVlan VLAN of UDP-encapsulated packets. Default: untag(0) Invalid(-1) This attribute is invalid in T-BC mode.	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.2011.6.25.1.10.1.26
hw1588ClkPtpPortMacVlan VLAN of MAC-encapsulated packets. BC: Default: untag(0) Invalid(-1) T-BC: Supports only untag(0).	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.2011.6.25.1.10.1.27
hwPtpPortRingFiberLengthChangeValue The change (unit: ns) of the fiber length in a ring network detection. It may be a positive or negative value, which depends on the next node. If the value is -1, the ring network detection function does not take effect.	Integer32 Constraints: range: -1-65529	.1.3.6.1.4.1.2011.6.25.1.10.1.28
hwPtpPortRingFiberLengthChangeValueFlag Flag of the change of the fiber length in a ring network detection. Options: 1.invalid(-1) - indicates that the the ring network detection function does not take effect. 2.negative(1) - indicates that the change of …	Enumeration Enumerated Values: -1 invalid 1 negative 2 positive	.1.3.6.1.4.1.2011.6.25.1.10.1.29
hw1588ClkPtpPortNotSlave In T-BC mode, this port cannot be the slave port when notSlave is enable; this port can be the slave port when notSlave is disable. By default, it is enable(1). This attribute is invalid in BC mod…	Enumerationr/w Enumerated Values: 1 enable 2 disable 255 invalid	.1.3.6.1.4.1.2011.6.25.1.10.1.30
hw1588ClkPtpPortLocalPriority In T-BC mode, the local priority of the port is configured to calculate the optimum master clock. The smaller the value, the higher the priority. Range: 1-255 Default value: 128 This attribute is i…	Integer32r/w Constraints: range: 1-255 range: -1--1	.1.3.6.1.4.1.2011.6.25.1.10.1.31

1588 ACR clock manage table.
The index of this table is master index.

hw1588ACRMasterEntry row .1.3.6.1.4.1.2011.6.25.1.12.1.1

1588 ACR clock manage table.
The index of this entry is master index.

Indexes

hw1588ACRMasterIndex

Column	Syntax	OID
hw1588ACRMasterIndex Index of 1588 ACR master. Range: 1 - 2	Integer32r/w Constraints: range: 1-2	.1.3.6.1.4.1.2011.6.25.1.12.1.1.1
hw1588ACRMasterIPAddr 1588 ACR master IP address	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.12.1.1.2
hw1588ACRMasterNegotiate Port enabled type. Options: 1. idle(1) - the negotiate state is idle 2. negotiate(2)- the negotiate state is negotiate	Enumeration Enumerated Values: 1 idle 2 negotiate	.1.3.6.1.4.1.2011.6.25.1.12.1.1.3
hw1588ACRRowStatus Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.25.1.12.1.1.4

1588ACR server management table.
The index of this table is server index.

hw1588ACRServerEntry row .1.3.6.1.4.1.2011.6.25.1.12.4.1

1588ACR server management table.
The index of this entry is server index.

Indexes

hw1588ACRServerIndex

Column	Syntax	OID
hw1588ACRServerIndex The server index. Range: 1-2	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.2011.6.25.1.12.4.1.1
hw1588ACRServerIpAddr The IP address of server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.1.12.4.1.2
hw1588ACRServerNegoStatus The status of negotiation. Options: 1. init(1) - no enable negotiation 2. success(2) - negotiate succesfully 3. failed(3) - negotiate failed	Enumeration Enumerated Values: 1 init 2 success 3 failed	.1.3.6.1.4.1.2011.6.25.1.12.4.1.3
hw1588ACRServerSsm The quality level. Options: 1. prc(2) - prc 2. ssua(4) - ssua 3. ssub(8) - ssub 4. sec(11) - sec 5. dnu(15) - dnu	Enumeration Enumerated Values: 2 prc 4 ssua 8 ssub 11 sec 15 dnu	.1.3.6.1.4.1.2011.6.25.1.12.4.1.4
hw1588ACRServerPriority The priority.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.1.12.4.1.5
hw1588ACRServerPTSFLossAnnounce The announce PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced	Enumeration Enumerated Values: 1 normal 2 failed 255 none	.1.3.6.1.4.1.2011.6.25.1.12.4.1.6
hw1588ACRServerPTSFLossSync The sync PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced	Enumeration Enumerated Values: 1 normal 2 failed 255 none	.1.3.6.1.4.1.2011.6.25.1.12.4.1.7
hw1588ACRServerPTSFLossDelayResp The delay response PTSF status. Options: 1. normal(1) - status is normal 2. failed(2) - status is abnormal 3. none(255) - not referenced	Enumeration Enumerated Values: 1 normal 2 failed 255 none	.1.3.6.1.4.1.2011.6.25.1.12.4.1.8

ont clk profile global management table.

hwOntClkProfileGlobalInfoEntry row .1.3.6.1.4.1.2011.6.25.2.1.1

This table manage ont clk profile global setting.

Indexes

hwOntClkProfileInfoNameIndex

Column	Syntax	OID
hwOntClkProfileInfoNameIndex Ont clk Profile name Index.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.25.2.1.1.1
hwOntClkProfileRowStatus Rowstatus of the Ont clk profile. Options: 1. createAndGo(4) - Creates an Ont clk profile 2. destroy(6) - Destroys Ont clk profile.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.25.2.1.1.2
hwOntClkProfileType The Ont Clk Profile device type. Options: 1.bc - general 2.tbc - g.8273.1 Default: bc	Enumerationr/w Enumerated Values: 1 bc 2 tbc	.1.3.6.1.4.1.2011.6.25.2.1.1.3
hwOntClkProfileQlMode The switch of Ont Clk QL-MODE. Options: 1.enable(1) - enable QL-MODE 2.disable(2) - disable QL-MODE Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.2.1.1.4
hwOntClkProfilePtpSwitch The switch of Ont PTP Switch. Options: 1.enable(1) - enable ont clk profile ptp 2.disable(2) - disable ont clk profile ptp Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.2.1.1.5
hwOntClkProfilePtpBmcSwitch The switch of Ont PTP BMC Switch. Options: 1.enable(1) - enable ont ptp BMC 2.disable(2) - disable ptp BMC Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.2.1.1.6
hwOntClkProfilePtpDomain PTP domain value. BC: Range: 0-255 Default: 0 T-BC: Range: 24-43 Default: 24	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.25.2.1.1.7

ont clk profile global port management table.

hwOntClkProfilePortInfoEntry row .1.3.6.1.4.1.2011.6.25.2.2.1

This table manage ont clk profile port setting.

Indexes

hwOntClkProfileInfoNameIndex hwOntClkProfOntPortCfgOntPhyType hwOntClkProfOntPortCfgOntPhyIndex

Column	Syntax	OID
hwOntClkProfOntPortCfgOntPhyType This object indicates the port type of the ONT.	Enumeration Enumerated Values: 13 t1 14 e1 24 fe 34 ge 37 vdsl 46 moca 47 eth 50 iphost	.1.3.6.1.4.1.2011.6.25.2.2.1.1
hwOntClkProfOntPortCfgOntPhyIndex This object indicates the port index of the ONT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.2.2.1.2
hwOntClkProfOntPortPtpSwtich Enable or disable the 1588 function of PTP port. Options: 1. enable(1) -Enable the 1588 function of this port 2. disable(2) -Disable the 1588 function of this port Default: disable(2)	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.25.2.2.1.3
hwOntClkProfOntPortPtpStep Clock step mode. Options: 1.oneStep(1) - indicates that clock step mode is one-step. 2.twoStep(2) - indicates that clock step mode is two-step. Default: oneStep(1)	Enumerationr/w Enumerated Values: 1 oneStep 2 twoStep	.1.3.6.1.4.1.2011.6.25.2.2.1.4
hwOntClkProfOntPortPtpDelayMode Delay measurement mechanism. Options: 1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism. 2.pdelayMechanism(2) - indicates that delay mechanism is pdelay-mechanism. Default: delayMechanism(1)	Enumerationr/w Enumerated Values: 1 delayMechanism 2 pdelayMechanism	.1.3.6.1.4.1.2011.6.25.2.2.1.5
hwOntClkProfOntPortPtpAnnInterval Interval for sending announce packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 2. 1/8s (7) - indicates that the time interval is 1/8s 3. 1/4s (8) - indi…	Integer32r/w Constraints: range: 6-14	.1.3.6.1.4.1.2011.6.25.2.2.1.6
hwOntClkProfOntPortPtpSyncInterval Interval for sending sync packets. BC: Default: 1/16s(6) Options: 1. 1/256s (2) - indicates that the time interval is 1/256s 2. 1/128s (3) - indicates that the time interval is 1/128s 3. 1/64s (4) - indi…	Integer32r/w Constraints: range: 2-11	.1.3.6.1.4.1.2011.6.25.2.2.1.7
hwOntClkProfOntPortPtpReqInterval Interval for sending req packets. BC: Default: 1/8s(7) Options: 1. 1/16s (6) - indicates that the time interval is 1/16s 3. 1/8s (7) - indicates that the time interval is 1/8s 3. 1/4…	Integer32r/w Constraints: range: 6-14	.1.3.6.1.4.1.2011.6.25.2.2.1.8
hwOntClkProfOntPortPtpMsgFormat PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet 2. ptpip(2) - indicates that the PTP message is encapsulat…	Enumerationr/w Enumerated Values: 1 ptpeth 2 ptpip	.1.3.6.1.4.1.2011.6.25.2.2.1.9
hwOntClkProfOntPortPtpTransportType PTP info mode. Default: multicast(1) Options: 1. multicast(1) - indicates that the Info mode of the 1588 clock PTP port is multicast 2. unicast(2) - indicates that the Info mode of the 1588 clock PTP port is unicast	Enumerationr/w Enumerated Values: 1 multicast 2 unicast	.1.3.6.1.4.1.2011.6.25.2.2.1.10
hwOntClkProfOntPortPtpVlan VLAN of UDP-encapsulated or MAC-encapsulated packets. Default: untag(0) Invalid(-1)	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.2011.6.25.2.2.1.11
hwOntClkProfOntPortPtpVlanPri VLAN priority of UDP-encapsulated or MAC-encapsulated packets. Default:7 Invalid(-1)	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.6.25.2.2.1.12
hwOntClkProfOntPortPtpUdpDscp DSCP of UDP-encapsulated packets. Default:56 Invalid(-1)	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.6.25.2.2.1.13
hwOntClkProfOntPortPtpDestMac Destination MAC address of MAC-encapsulated packets. T-BC:Supports only MAC-encapsulated packets and supports multicast MAC address configuration. It can be 01-80-C2-00-00-0E (default) and 01-1B-19-00-00-00. This attri…	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.25.2.2.1.14

ont clk global management table.

hwOntClkGlobalInfoEntry row .1.3.6.1.4.1.2011.6.25.2.3.1

This table manage ont clk global configuration table.

Indexes

IF-MIBifIndex hwOntClkObjectIndex

Column	Syntax	OID
hwOntClkObjectIndex ONT ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.2.3.1.1
hwOntObjectClockProfileName The name of ONT's clock profile. When the string length is 0, it means the unbinding operation.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.25.2.3.1.2
hwOntObjectPtpClockId The 1588 clock identity of device. The first 4 bytes are OUI and product ID and do not need to be configured.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.2011.6.25.2.3.1.3
hwOntObjectClkWorkMode Clock out working mode. Options: 1.trace(1) - indicates that the clock is working in tracing mode. 2.surge(2) - indicates that the clock is working in surge mode. 3.keep(3) - indicates that t…	Enumeration Enumerated Values: -1 invalid 1 trace 2 surge 3 keep 4 snap 5 thirdsurge	.1.3.6.1.4.1.2011.6.25.2.3.1.4
hwOntObjectClkLockState Clock lock state. Options: 1.locked(1) - indicates that the clock is locked. 2.unlocked(2) - indicates that the clock is unlocked. 3.invalid(-1) - indicates that it is not be queried.	Enumeration Enumerated Values: -1 invalid 1 locked 2 unlocked	.1.3.6.1.4.1.2011.6.25.2.3.1.5
hwOntObjectClkSrcState Clock source state. Options: 1.none(1) - indicates that the clock source index isn't configured. 2.normal(2) - indicates that the state of the clock source is active. 3.failure(3) - indicates th…	Enumeration Enumerated Values: -1 invalid 1 none 2 normal 3 failure 4 failureLoss 5 failureEFD	.1.3.6.1.4.1.2011.6.25.2.3.1.6
hwOntObjectClkSrcQL Clock source quality level: Options: 1. qlPRC(2) - indicates that primary reference clock. 2. qlSsuA(4) - indicates that the clock signal comes from class I or class. V sub-clock prescribed o…	Enumeration Enumerated Values: -1 invalid 2 qlPRC 4 qlSsuA 8 qlSsuB 11 qlSEC 15 qlDNU 255 qlCLEAR	.1.3.6.1.4.1.2011.6.25.2.3.1.7
hwOntObjectPtpLockState PTP lock state. Options: 1.locked(1) - indicates that the PTP is locked. 2.unlocked(2) - indicates that the PTP is unlocked. 3.invalid(-1) - indicates that it is not be queried.	Enumeration Enumerated Values: -1 invalid 1 locked 2 unlocked	.1.3.6.1.4.1.2011.6.25.2.3.1.8
hwOntObjectPtpSrcState 1588 source status: Options: 1.none(1) - indicates that the 1588 source index is not configured. 2.normal(2) - indicates that the status of 1588 source is normal. 3.failure(3) - indicates that the status of 1588 …	Enumeration Enumerated Values: -1 invalid 1 none 2 normal 3 failure	.1.3.6.1.4.1.2011.6.25.2.3.1.9
hwOntObjectPtpGmClockID Grand master clock ID.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2011.6.25.2.3.1.10
hwOntObjectPtpParentClockID PTP parent clockID.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.2011.6.25.2.3.1.11
hwOntObjectPtpParentPortID PTP parent portnumber. Invalid(-1)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.2.3.1.12
hwOntObjectPtpGmPriority1 Grand master clock priority1. Invalid(-1)	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.2011.6.25.2.3.1.13
hwOntObjectPtpGmPriority2 Grand master clock priority2. Invalid(-1)	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.2011.6.25.2.3.1.14
hwOntObjectPtpGmAccuracy Grand master clock accuracy. Invalid(-1)	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.2011.6.25.2.3.1.15
hwOntObjectPtpGmClockClass Grand master clock class. Invalid(-1)	Integer32 Constraints: range: -1-255	.1.3.6.1.4.1.2011.6.25.2.3.1.16
hwOntObjectPtpGmTimeSource Indicates the source of time used by the grandmaster clock. Invalid(-1)	Enumeration Enumerated Values: -1 invalid 16 atomicclock 32 gps 48 terrestrialradio 64 ptp 80 ntp 96 handset 144 other 160 internaloscillator	.1.3.6.1.4.1.2011.6.25.2.3.1.17
hwOntObjectPtpGmTimeScale The time scale of the grandmaster clock. Invalid(-1)	Enumeration Enumerated Values: -1 invalid 1 ptp 2 arb	.1.3.6.1.4.1.2011.6.25.2.3.1.18
hwOntObjectPtpFrequencyTraceable If not invalid, the value is true if the frequency determinning the timescale is traceable to a primary reference, otherwise the value is false. Options: 1.false(1) - indicates that the frequency determinning the…	Enumeration Enumerated Values: -1 invalid 1 false 2 true	.1.3.6.1.4.1.2011.6.25.2.3.1.19
hwOntObjectPtpTimeTraceable If not invalid, the value is ture if the time is traceable to a primary reference, otherwise the value is false. Options: 1.false(1) - indicates that the time isn't traceable to a primary reference. 2.true…	Enumeration Enumerated Values: -1 invalid 1 false 2 true	.1.3.6.1.4.1.2011.6.25.2.3.1.20
hwOntObjectPtpStepRemoved The value is the number of paths (number of BCs) between the local clock and the grand master clock. Invalid(-1)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.2.3.1.21

ont clk global discrete management table.

hwOntClkPortInfoEntry row .1.3.6.1.4.1.2011.6.25.2.4.1

This table manage ont clk discrete configuration table.

Indexes

IF-MIBifIndex hwOntClkObjectIndex hwOntClkObjectPortType hwOntClkObjectPortId

Column	Syntax	OID
hwOntClkObjectPortType This object indicates the port type of the ONT.	Enumeration Enumerated Values: 13 t1 14 e1 24 fe 34 ge 37 vdsl 46 moca 47 eth 50 iphost	.1.3.6.1.4.1.2011.6.25.2.4.1.1
hwOntClkObjectPortId This object indicates the port index of the ONT.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.25.2.4.1.2
hwOntClkObjectPortPtpMsgFormat PTP message encapsulation format,the default value is PTPETH(1). Options: 1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet. 2. ptpip(2) - indicates that the PTP message is encapsu…	Enumerationr/w Enumerated Values: -1 invalid 1 ptpeth 2 ptpip 5 default	.1.3.6.1.4.1.2011.6.25.2.4.1.3
hwOntClkObjectPortPtpTransportType PTP info mode. Default: multicast(1) Options: 1. multicast(1) - indicates that the Info mode of the PTP port is multicast. 2. unicast(2) - indicates that the PTP info mode of the PTP port is unicast. 3. invalid(-1) -…	Enumerationr/w Enumerated Values: -1 invalid 1 multicast 2 unicast	.1.3.6.1.4.1.2011.6.25.2.4.1.4
hwOntClkObjectPortPtpVlan VLAN of UDP-encapsulated or MAC-encapsulated packets. Default: untag(0) Invalid(-1)	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.2011.6.25.2.4.1.5
hwOntClkObjectPortPtpVlanPri VLAN priority of UDP-encapsulated or MAC-encapsulated packets. Default:7 Invalid(-1)	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.2011.6.25.2.4.1.6
hwOntClkObjectPortPtpUdpDscp DSCP of UDP-encapsulated packets. Default:56 Invalid(-1)	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.6.25.2.4.1.7
hwOntClkObjectPortPtpDestMac Destination MAC address of UDP-encapsulated or MAC-encapsulated packets. Invalid(ff-ff-ff-ff-ff-ff)	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.2011.6.25.2.4.1.8
hwOntClkObjectPortPtpSrcIp Source IP address of UDP-encapsulated packets. Default:0.0.0.0	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.2.4.1.9
hwOntClkObjectPortPtpDstIp BC:This attribute cannot be configured and can only be set to the default value in multicast mode. It can be configured only in unicast mode. This attribute is invalid in T-BC mode.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.25.2.4.1.10