GMPLS-TE-STD-MIB Table View

The gmplsTunnelTable sparsely extends the mplsTunnelTable of
MPLS-TE-STD-MIB.  It allows GMPLS tunnels to be created between
an LSR and a remote endpoint, and existing tunnels to be
reconfigured or removed.
          
Note that only point-to-point tunnel segments are supported,
although multipoint-to-point and point-to-multipoint
connections are supported by an LSR acting as a cross-connect.
Each tunnel can thus have one out-segment originating at this
LSR and/or one in-segment terminating at this LSR.
          
The row status of an entry in this table is controlled by the
mplsTunnelRowStatus in the corresponding entry in the
mplsTunnelTable.  When the corresponding mplsTunnelRowStatus has
value active(1), a row in this table may not be created or
modified.
          
The exception to this rule is the
gmplsTunnelAdminStatusInformation object, which can be modified
while the tunnel is active.

gmplsTunnelEntry row .1.3.6.1.2.1.10.166.13.2.1.1

An entry in this table in association with the corresponding
entry in the mplsTunnelTable represents a GMPLS tunnel.

An entry can be created by a network administrator via SNMP SET
commands, or in response …

Indexes

MPLS-TE-STD-MIBmplsTunnelIndex MPLS-TE-STD-MIBmplsTunnelInstance MPLS-TE-STD-MIBmplsTunnelIngressLSRId MPLS-TE-STD-MIBmplsTunnelEgressLSRId

Column	Syntax	OID
gmplsTunnelUnnumIf Denotes whether or not this tunnel corresponds to an unnumbered interface represented by an entry in the interfaces group table (the ifTable) with ifType set to mpls(166). This object is only used if mpls…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.166.13.2.1.1.1
gmplsTunnelAttributes This bitmask indicates optional parameters for this tunnel. These bits should be taken in addition to those defined in mplsTunnelSessionAttributes in order to determine the full set of options to be signaled (for exampl…	Bitsr/w Enumerated Values: 0 labelRecordingDesired	.1.3.6.1.2.1.10.166.13.2.1.1.2
gmplsTunnelLSPEncoding This object indicates the encoding of the LSP being requested. A value of 'tunnelLspNotGmpls' indicates that GMPLS signaling is not in use. Some objects in this MIB module may be of use for MPLS signalin…	IANA-GMPLS-TC-MIBIANAGmplsLSPEncodingTypeTCr/w Type Values: 0 tunnelLspNotGmpls 1 tunnelLspPacket 2 tunnelLspEthernet 3 tunnelLspAnsiEtsiPdh 5 tunnelLspSdhSonet 7 tunnelLspDigitalWrapper 8 tunnelLspLambda 9 tunnelLspFiber 11 tunnelLspFiberChannel 12 tunnelDigitalPath 13 tunnelOpticalChannel 14 tunnelLine	.1.3.6.1.2.1.10.166.13.2.1.1.3
gmplsTunnelSwitchingType Indicates the type of switching that should be performed on a particular link. This field is needed for links that advertise more than one type of switching capability. The values to use are defined in t…	IANA-GMPLS-TC-MIBIANAGmplsSwitchingTypeTCr/w Type Values: 0 unknown 1 psc1 2 psc2 3 psc3 4 psc4 30 evpl 40 pbb 51 l2sc 100 tdm 110 otntdm 125 dcsc 150 lsc 151 wsonlsc 200 fsc	.1.3.6.1.2.1.10.166.13.2.1.1.4
gmplsTunnelLinkProtection This bitmask indicates the level of link protection required. A value of zero (no bits set) indicates that any protection may be used. The following describes these bitfields: extraTraffic This flag i…	Bitsr/w Enumerated Values: 0 extraTraffic 1 unprotected 2 shared 3 dedicatedOneToOne 4 dedicatedOnePlusOne 5 enhanced	.1.3.6.1.2.1.10.166.13.2.1.1.5
gmplsTunnelGPid This object indicates the payload carried by the LSP. It is only required when GMPLS will be used for this LSP. The values to use are defined in the TEXTUAL-CONVENTION IANAGmplsGeneralizedPidTC found in …	IANA-GMPLS-TC-MIBIANAGmplsGeneralizedPidTCr/w Type Values: 0 unknown 5 asynchE4 6 asynchDS3T3 7 asynchE3 8 bitsynchE3 9 bytesynchE3 10 asynchDS2T2 11 bitsynchDS2T2 12 reservedByRFC3471first 13 asynchE1 14 bytesynchE1 15 bytesynch31ByDS0 16 asynchDS1T1 17 bitsynchDS1T1 18 bytesynchDS1T1 19 vc1vc12 20 reservedByRFC3471second 21 reservedByRFC3471third 22 ds1SFAsynch 23 ds1ESFAsynch 24 ds3M23Asynch 25 ds3CBitParityAsynch 26 vtLovc 27 stsSpeHovc 28 posNoScramble16BitCrc 29 posNoScramble32BitCrc 30 posScramble16BitCrc 31 posScramble32BitCrc 32 atm 33 ethernet 34 sdhSonet 36 digitalwrapper 37 lambda 38 ansiEtsiPdh 40 lapsSdh 41 fddi 42 dqdb 43 fiberChannel3 44 hdlc 45 ethernetV2DixOnly 46 ethernet802dot3Only 47 g709ODUj 48 g709OTUk 49 g709CBRorCBRa 50 g709CBRb 51 g709BSOT 52 g709BSNT 53 gfpIPorPPP 54 gfpEthernetMAC 55 gfpEthernetPHY 56 g709ESCON 57 g709FICON 58 g709FiberChannel 59 framedGFP 60 sTM1 61 sTM4 62 infiniBand 63 sDI 64 sDI1point001 65 dVBASI 66 g709ODU125G 67 g709ODUAny 68 nullTest 69 randomTest 70 sixtyfourB66BGFPFEthernet	.1.3.6.1.2.1.10.166.13.2.1.1.6
gmplsTunnelSecondary Indicates that the requested LSP is a secondary LSP. This object is only meaningful if gmplsTunnelLSPEncoding is not set to 'tunnelLspNotGmpls'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.166.13.2.1.1.7
gmplsTunnelDirection Whether this tunnel carries forward data only (is unidirectional) or is bidirectional. Values of this object other than 'forward' are meaningful only if gmplsTunnelLSPEncoding is not set to 'tunnelLspNotG…	Enumerationr/w Enumerated Values: 0 forward 1 bidirectional	.1.3.6.1.2.1.10.166.13.2.1.1.8
gmplsTunnelPathComp This value instructs the source node on how to perform path computation on the explicit route specified by the associated entries in the gmplsTunnelHopTable. dynamicFull The user specifies at least the …	Enumerationr/w Enumerated Values: 1 dynamicFull 2 explicit 3 dynamicPartial	.1.3.6.1.2.1.10.166.13.2.1.1.9
gmplsTunnelUpstreamNotifyRecipientType This object is used to aid in interpretation of gmplsTunnelUpstreamNotifyRecipient.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.13.2.1.1.10
gmplsTunnelUpstreamNotifyRecipient Indicates the address of the upstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received from an upstream LSR in a Path message. This obj…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.1.1.11
gmplsTunnelSendResvNotifyRecipientType This object is used to aid in interpretation of gmplsTunnelSendResvNotifyRecipient.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.13.2.1.1.12
gmplsTunnelSendResvNotifyRecipient Indicates to an upstream LSR the address to which it should send downstream Notify messages relating to this tunnel. This object is only valid when signaling a tunnel using RSVP. It is also…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.1.1.13
gmplsTunnelDownstreamNotifyRecipientType This object is used to aid in interpretation of gmplsTunnelDownstreamNotifyRecipient.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.13.2.1.1.14
gmplsTunnelDownstreamNotifyRecipient Indicates the address of the downstream recipient for Notify messages relating to this tunnel and issued by this LSR. This information is typically received from an upstream LSR in a Resv message. This object is only …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.1.1.15
gmplsTunnelSendPathNotifyRecipientType This object is used to aid in interpretation of gmplsTunnelSendPathNotifyRecipient.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.13.2.1.1.16
gmplsTunnelSendPathNotifyRecipient Indicates to a downstream LSR the address to which it should send upstream Notify messages relating to this tunnel. This object is only valid when signaling a tunnel using RSVP. It is also …	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.1.1.17
gmplsTunnelAdminStatusFlags Determines the setting of the Admin Status flags in the Admin Status object or TLV, as described in RFC 3471. Setting this field to a non-zero value will result in the inclusion of the Admin Status object on signaling …	IANA-GMPLS-TC-MIBIANAGmplsAdminStatusInformationTCr/w Type Values: 0 reflect 1 reserved1 2 reserved2 3 reserved3 4 reserved4 5 reserved5 6 reserved6 7 reserved7 8 reserved8 9 reserved9 10 reserved10 11 reserved11 12 reserved12 13 reserved13 14 reserved14 15 reserved15 16 reserved16 17 reserved17 18 reserved18 19 reserved19 20 reserved20 21 reserved21 22 reserved22 23 oamFlowsEnabled 24 oamAlarmsEnabled 25 handover 26 lockout 27 inhibitAlarmCommunication 28 callControl 29 testing 30 administrativelyDown 31 deleteInProgress	.1.3.6.1.2.1.10.166.13.2.1.1.18
gmplsTunnelExtraParamsPtr Some tunnels will run over transports that can usefully support technology-specific additional parameters (for example, Synchronous Optical Network (SONET) resource usage). Such parameters can be supplied in an externa…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.1.1.19

The gmplsTunnelHopTable sparsely extends the mplsTunnelHopTable
of MPLS-TE-STD-MIB.  It is used to indicate the Explicit Labels
to be used in an explicit path for a GMPLS tunnel defined in the
mplsTunnelTable and gmplsTunnelTable, when it is established
using signaling.  It does not insert new hops, but does define
new values for hops defined in the mplsTunnelHopTable.
          
Each row in this table is indexed by the same indexes as in the
mplsTunnelHopTable.  It is acceptable for some rows in the
mplsTunnelHopTable to have corresponding entries in this table
and some to have no corresponding entry in this table.
          
The storage type for this entry is given by the value
of mplsTunnelHopStorageType in the corresponding entry in the
mplsTunnelHopTable.
          
The row status of an entry in this table is controlled by
mplsTunnelHopRowStatus in the corresponding entry in the
mplsTunnelHopTable.  That is, it is not permitted to create a row
          
in this table, or to modify an existing row, when the
corresponding mplsTunnelHopRowStatus has the value active(1).

gmplsTunnelHopEntry row .1.3.6.1.2.1.10.166.13.2.2.1

An entry in this table represents additions to a tunnel hop
defined in mplsTunnelHopEntry. At an ingress to a tunnel, an
entry in this table is created by a network administrator for an
ERLSP to be set up by a signalin…

Indexes

MPLS-TE-STD-MIBmplsTunnelHopListIndex MPLS-TE-STD-MIBmplsTunnelHopPathOptionIndex MPLS-TE-STD-MIBmplsTunnelHopIndex

Column	Syntax	OID
gmplsTunnelHopLabelStatuses This bitmask indicates the presence of labels indicated by the gmplsTunnelHopExplicitForwardLabel or gmplsTunnelHopExplicitForwardLabelPtr, and gmplsTunnelHopExplicitReverseLabel or gmplsTunnelHopExplicit…	Bits Enumerated Values: 0 forwardPresent 1 reversePresent	.1.3.6.1.2.1.10.166.13.2.2.1.1
gmplsTunnelHopExplicitForwardLabel If gmplsTunnelHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelHopExplicitForwardLabelPtr contains the value zeroDotZero, then the label to use on this hop is represented by the value of …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.2.1.2
gmplsTunnelHopExplicitForwardLabelPtr If the gmplsTunnelHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the la…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.2.1.3
gmplsTunnelHopExplicitReverseLabel If the gmplsTunnelHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelHopExplicitReverseLabelPtr contains the value zeroDotZero, then the label to use on this hop is found in this object enc…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.2.1.4
gmplsTunnelHopExplicitReverseLabelPtr If the gmplsTunnelHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the la…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.2.1.5

The gmplsTunnelARHopTable sparsely extends the
mplsTunnelARHopTable of MPLS-TE-STD-MIB.  It is used to
indicate the labels currently in use for a GMPLS tunnel
defined in the mplsTunnelTable and gmplsTunnelTable, as
reported by the signaling protocol.  It does not insert
new hops, but does define new values for hops defined in
the mplsTunnelARHopTable.
          
Each row in this table is indexed by the same indexes as in the
mplsTunnelARHopTable.  It is acceptable for some rows in the
mplsTunnelARHopTable to have corresponding entries in this table
and some to have no corresponding entry in this table.
          
Note that since the information necessary to build entries
within this table is not provided by some signaling protocols
and might not be returned in all cases of other signaling
protocols, implementation of this table and the
mplsTunnelARHopTable is optional.  Furthermore, since the
information in this table is actually provided by the
signaling protocol after the path has been set up, the entries
in this table are provided only for observation, and hence,
all variables in this table are accessible exclusively as
read-only.

gmplsTunnelARHopEntry row .1.3.6.1.2.1.10.166.13.2.3.1

An entry in this table represents additions to a tunnel hop
visible in mplsTunnelARHopEntry. An entry is created by the
signaling protocol for a signaled ERLSP set up by the signaling
protocol.

At any node…

Indexes

MPLS-TE-STD-MIBmplsTunnelARHopListIndex MPLS-TE-STD-MIBmplsTunnelARHopIndex

Column	Syntax	OID
gmplsTunnelARHopLabelStatuses This bitmask indicates the presence and status of labels indicated by the gmplsTunnelARHopExplicitForwardLabel or gmplsTunnelARHopExplicitForwardLabelPtr, and gmplsTunnelARHopExplicitReverseLabel or gmplsTunnelARHopExpl…	Bits Enumerated Values: 0 forwardPresent 1 reversePresent 2 forwardGlobal 3 reverseGlobal	.1.3.6.1.2.1.10.166.13.2.3.1.1
gmplsTunnelARHopExplicitForwardLabel If the gmplsTunnelARHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelARHopExplicitForwardLabelPtr contains the value zeroDotZero, then the label in use on this hop is found in this object…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.3.1.2
gmplsTunnelARHopExplicitForwardLabelPtr If the gmplsTunnelARHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the …	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.3.1.3
gmplsTunnelARHopExplicitReverseLabel If the gmplsTunnelARHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelARHopExplicitReverseLabelPtr contains the value zeroDotZero, then the label in use on this hop is found in this object…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.3.1.4
gmplsTunnelARHopExplicitReverseLabelPtr If the gmplsTunnelARHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the …	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.3.1.5
gmplsTunnelARHopProtection Availability and usage of protection on the reported link. localAvailable This flag is set to indicate that the link downstream of this node is protected via a local repair mechanism. l…	Bits Enumerated Values: 0 localAvailable 1 localInUse	.1.3.6.1.2.1.10.166.13.2.3.1.6

The gmplsTunnelCHopTable sparsely extends the
mplsTunnelCHopTable of MPLS-TE-STD-MIB.  It is used to indicate
additional information about the hops of a GMPLS tunnel defined
in the mplsTunnelTable and gmplsTunnelTable, as computed by a
constraint-based routing protocol, based on the
mplsTunnelHopTable and the gmplsTunnelHopTable.
          
Each row in this table is indexed by the same indexes as in the
mplsTunnelCHopTable.  It is acceptable for some rows in the
mplsTunnelCHopTable to have corresponding entries in this table
and some to have no corresponding entry in this table.
          
Please note that since the information necessary to build
entries within this table may not be supported by some LSRs,
implementation of this table is optional.
          
Furthermore, since the information in this table is actually
provided by a path computation component after the path has been
computed, the entries in this table are provided only for
observation, and hence, all objects in this table are accessible
exclusively as read-only.

gmplsTunnelCHopEntry row .1.3.6.1.2.1.10.166.13.2.4.1

An entry in this table represents additions to a computed tunnel
hop visible in mplsTunnelCHopEntry. An entry is created by a
path computation component based on the hops specified in the
corresponding mplsTunnelHopTab…

Indexes

MPLS-TE-STD-MIBmplsTunnelCHopListIndex MPLS-TE-STD-MIBmplsTunnelCHopIndex

Column	Syntax	OID
gmplsTunnelCHopLabelStatuses This bitmask indicates the presence of labels indicated by the gmplsTunnelCHopExplicitForwardLabel or gmplsTunnelCHopExplicitForwardLabelPtr and gmplsTunnelCHopExplicitReverseLabel or gmplsTunnelCHopExplicitReverseLabel…	Bits Enumerated Values: 0 forwardPresent 1 reversePresent	.1.3.6.1.2.1.10.166.13.2.4.1.1
gmplsTunnelCHopExplicitForwardLabel If the gmplsTunnelCHopLabelStatuses object indicates that a Forward Label is present and gmplsTunnelCHopExplicitForwardLabelPtr contains the value zeroDotZero, then the label to use on this hop is found in this object e…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.4.1.2
gmplsTunnelCHopExplicitForwardLabelPtr If the gmplsTunnelCHopLabelStatuses object indicates that a Forward Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the l…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.4.1.3
gmplsTunnelCHopExplicitReverseLabel If the gmplsTunnelCHopLabelStatuses object indicates that a Reverse Label is present and gmplsTunnelCHopExplicitReverseLabelPtr contains the value zeroDotZero, then the label to use on this hop is found in this object e…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.4.1.4
gmplsTunnelCHopExplicitReverseLabelPtr If the gmplsTunnelCHopLabelStatuses object indicates that a Reverse Label is present, this object contains a pointer to a row in another MIB table (such as the gmplsLabelTable of GMPLS-LABEL-STD-MIB) that contains the l…	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.2.1.10.166.13.2.4.1.5

This table augments the gmplsTunnelTable to provide
per-tunnel packet performance information for the reverse
direction of a bidirectional tunnel.  It can be seen as
supplementing the mplsTunnelPerfTable, which augments the
mplsTunnelTable.
          
For links that do not transport packets, these packet counters
cannot be maintained.  For such links, attempts to read the
objects in this table will return noSuchInstance.
          
A tunnel can be known to be bidirectional by inspecting the
gmplsTunnelDirection object.

gmplsTunnelReversePerfEntry row .1.3.6.1.2.1.10.166.13.2.5.1

An entry in this table is created by the LSR for every
bidirectional GMPLS tunnel where packets are visible to the
LSR.

Indexes

No indexes recorded

Column	Syntax	OID
gmplsTunnelReversePerfPackets Number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part of the 64-bit value if both gmplsTunnelReve…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.5.1.1
gmplsTunnelReversePerfHCPackets High-capacity counter for number of packets forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.13.2.5.1.2
gmplsTunnelReversePerfErrors Number of errored packets received on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For such links, this value will retu…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.5.1.3
gmplsTunnelReversePerfBytes Number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. This object represents the 32-bit value of the least significant part of the 64-bit value if both gmplsTunnelRevers…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.5.1.4
gmplsTunnelReversePerfHCBytes High-capacity counter for number of bytes forwarded on the tunnel in the reverse direction if it is bidirectional. For links that do not transport packets, this packet counter cannot be maintained. For s…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.166.13.2.5.1.5

This table augments the mplsTunnelTable.
          
This table provides per-tunnel information about errors.  Errors
may be detected locally or reported through the signaling
protocol.  Error reporting is not exclusive to GMPLS, and this
table may be applied in MPLS systems.
          
Entries in this table are not persistent over system resets
or re-initializations of the management system.

gmplsTunnelErrorEntry row .1.3.6.1.2.1.10.166.13.2.6.1

An entry in this table is created by the LSR for every tunnel
where error information is visible to the LSR.

Note that systems that read the objects in this table one at
a time and do not perform atomic ope…

Indexes

No indexes recorded

Column	Syntax	OID
gmplsTunnelErrorLastErrorType The nature of the last error. Provides interpretation context for gmplsTunnelErrorProtocolCode and gmplsTunnelErrorProtocolSubcode. A value of noError(0) shows that there is no error associated with this…	Enumeration Enumerated Values: 0 noError 1 unknown 2 protocol 3 pathComputation 4 localConfiguration 5 localResources 6 localOther	.1.3.6.1.2.1.10.166.13.2.6.1.1
gmplsTunnelErrorLastTime The time at which the last error occurred. This is presented as the value of SysUpTime when the error occurred or was reported to this node. If gmplsTunnelErrorLastErrorType has the value noError(0), the…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.2.1.10.166.13.2.6.1.2
gmplsTunnelErrorReporterType The address type of the error reported. This object is used to aid in interpretation of gmplsTunnelErrorReporter.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.10.166.13.2.6.1.3
gmplsTunnelErrorReporter The address of the node reporting the last error, or the address of the resource (such as an interface) associated with the error. If gmplsTunnelErrorLastErrorType has the value noError(0), then this obje…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.6.1.4
gmplsTunnelErrorCode The primary error code associated with the last error. The interpretation of this error code depends on the value of gmplsTunnelErrorLastErrorType. If the value of gmplsTunnelErrorLastErrorType is noErro…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.6.1.5
gmplsTunnelErrorSubcode The secondary error code associated with the last error and the protocol used to signal this tunnel. This value is interpreted in the context of the value of gmplsTunnelErrorCode. If the value of gmplsTunnelErrorLastEr…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.166.13.2.6.1.6
gmplsTunnelErrorTLVs The sequence of interface identifier TLVs reported with the error by the protocol code. The interpretation of the TLVs and the encoding within the protocol are described in the references. A value of zero in the first…	OctetString Constraints: range: 0-65535	.1.3.6.1.2.1.10.166.13.2.6.1.7
gmplsTunnelErrorHelpString A textual string containing information about the last error, recovery actions, and support advice. If there is no help string, this object contains a zero length string. If the value of gmplsTunnelErrorLastErrorType i…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.166.13.2.6.1.8