mplsTunnelCHopIndex
MPLS-TE-STD-MIB ·
.1.3.6.1.2.1.10.166.3.2.8.1.2
Object
column
MPLS-TC-STD-MIBMplsPathIndex
Secondary index into this table identifying the particular hop.
Context
- MIB
- MPLS-TE-STD-MIB
- OID
.1.3.6.1.2.1.10.166.3.2.8.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- mplsTunnelCHopEntry
- Table
- mplsTunnelCHopTable
- Siblings
- 8
Syntax
MPLS-TC-STD-MIBMplsPathIndex
- Source
- MPLS-TC-STD-MIBMplsPathIndex
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 1..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mplsTunnelCHopListIndex Primary index into this table identifying a
particular computed hop list. | column | MPLS-TC-STD-MIBMplsPathIndex | .1.3.6.1.2.1.10.166.3.2.8.1.1 |
| mplsTunnelCHopAddrType The Hop Address Type of this tunnel hop.
Note that lspid(5) is a valid option only
for tunnels signaled via CRLDP. | column | MPLS-TC-STD-MIBTeHopAddressType | .1.3.6.1.2.1.10.166.3.2.8.1.3 |
| mplsTunnelCHopIpAddr The Tunnel Hop Address for this tunnel hop.
The type of this address is determined by the
value of the corresponding mplsTunnelCHopAddrType.
If mpls… | column | MPLS-TC-STD-MIBTeHopAddress | .1.3.6.1.2.1.10.166.3.2.8.1.4 |
| mplsTunnelCHopIpPrefixLen If mplsTunnelCHopAddrType is set to ipv4(1) or
ipv6(2), then this value will contain an
appropriate prefix length for the IP address in
object mplsTunnelCHopIpAddr. Otherwise this… | column | INET-ADDRESS-MIBInetAddressPrefixLength | .1.3.6.1.2.1.10.166.3.2.8.1.5 |
| mplsTunnelCHopAsNumber If mplsTunnelCHopAddrType is set to asnumber(3),
then this value will contain the AS number of this
hop. Otherwise the agent should set this object to
zero-length string and the m… | column | MPLS-TC-STD-MIBTeHopAddressAS | .1.3.6.1.2.1.10.166.3.2.8.1.6 |
| mplsTunnelCHopAddrUnnum If mplsTunnelCHopAddrType is set to unnum(4), then
this value will contain the unnumbered interface
identifier of this hop. This object should be used
in conjunction with mplsTunn… | column | MPLS-TC-STD-MIBTeHopAddressUnnum | .1.3.6.1.2.1.10.166.3.2.8.1.7 |
| mplsTunnelCHopLspId If mplsTunnelCHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indica… | column | MPLS-TC-STD-MIBMplsLSPID | .1.3.6.1.2.1.10.166.3.2.8.1.8 |
| mplsTunnelCHopType Denotes whether this is tunnel hop is routed in a
strict or loose fashion. | column | Enumeration | .1.3.6.1.2.1.10.166.3.2.8.1.9 |