CROUTE-MIB Table View

This table is an extention of MIB II
IpAddrTable, and is used to add/delete
entries to/from that table. In
addition it contains private objects.

ipInterfaceEntry row .1.3.6.1.4.1.81.31.1.2.1

The information concerning one of
this entity's IP interfaces. An IP
interface is a logical connection to a
certain IP net/subnet.

Indexes

ipInterfaceAddr

Column	Syntax	OID
ipInterfaceAddr The IP address to which this entry's addressing information pertains.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.2.1.1
ipInterfaceNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.2.1.2
ipInterfaceLowerIfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interfac…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.1.2.1.3
ipInterfaceType The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast	Enumerationr/w Enumerated Values: 1 broadcast 2 nBMA 4 ptp 8 loopback 16 tunnel	.1.3.6.1.4.1.81.31.1.2.1.4
ipInterfaceForwardIpBroadcast Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.2.1.5
ipInterfaceBroadcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones bro…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.2.1.6
ipInterfaceProxyArp When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC addres…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.2.1.7
ipInterfaceStatus For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interface, a…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.2.1.8
ipInterfaceMainRouterAddr The IP address of the main router backed up on this interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.2.1.9
ipInterfaceARPServerStatus Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't act…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.2.1.10
ipInterfaceName The name of this interface for compatibility with cli.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.1.2.1.11
ipInterfaceNetbiosRebroadcast inbound - netbios received from the interface are rebarodcasted, outbound - netbios are rebraodcasted to this interface, both - netbios are rebroadacsted both from and to this interface, …	Enumerationr/w Enumerated Values: 1 inbound 2 outbound 3 both 4 disable	.1.3.6.1.4.1.81.31.1.2.1.12
ipInterfaceIcmpRedirects enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.2.1.13
ipInterfaceOperStatus The operational status of this interface. up - the interface is active. down - the interface is inactive.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.81.31.1.2.1.14
ipInterfaceDhcpRelay enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP interface is defined will be defined. disable - disablesena…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.2.1.15
ipInterfaceAddrType This Mib item presents the type of the the ip address whether is static, unnumbered or dynamic using two of the following methods: pppipcp (negotiated) or dhcp.	Enumeration Enumerated Values: 1 static 2 pppIpcp 3 dhcp 4 unnumbered	.1.3.6.1.4.1.81.31.1.2.1.16
ipInterfaceAddrUnnumbered The IP address that is borrowed for the unnumbered interface. In case this IP address is not valid then 0.0.0.0. If the current IP interface borrow the IP address from dynamic IP interface where the IP address is not…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.2.1.17
ipInterfaceUnnumberedLowerIfAlias This object is an 'alias' name for the lower-layer interface used to borrow the IP unnumbered. In case the IP interface is not unnumbered then this value is null - not exists interface.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.1.2.1.18
ipInterfaceReasmMaxSize The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.81.31.1.2.1.19

This table is an extention of
rip2IfConfTable, and is used to
add/delete objects entries to/from
that table.

ripInterfaceEntry row .1.3.6.1.4.1.81.31.1.4.1

The information concerning one of
this entity's IP interfaces. An IP
interface is a logical connection to a
certain IP net/subnet.

Indexes

ripInterfaceAddr

Column	Syntax	OID
ripInterfaceAddr The IP address to which this entry's addressing information pertains.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.4.1.1
ripInterfaceMetric This variable indicates the number of hops that is to be assign to that interface.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.81.31.1.4.1.2
ripInterfaceSplitHorizon Whether to activate Poison Reverse algorithm, Split Horizon or none of them, on this interface	Enumerationr/w Enumerated Values: 1 poisonReverse 2 splitHorizon 3 none	.1.3.6.1.4.1.81.31.1.4.1.3
ripInterfaceAcceptDefaultRoute Whether to accept the default route from receive RIP message.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.4.1.4
ripInterfaceSendDefaultRoute Whether to send the default route in RIP message.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.4.1.5
ripInterfaceState The operational (mandatory state) of the IP interface from RIP point of view. It depends on Global RIP status, IP interface status and rip interface STATUS. inactive - set by the device (status), the r…	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.81.31.1.4.1.6
ripInterfaceSendMode What the router sends on this interface. All - send the whole routing table according to the RIP version. DefaultOnly - send default route only. DoNotDend - don't send any RIP informat…	Enumerationr/w Enumerated Values: 1 all 2 defaultOnly 3 doNotSend	.1.3.6.1.4.1.81.31.1.4.1.7
ripInterfaceVersion What RIP information the router sends on this interface.	Enumerationr/w Enumerated Values: 1 rip1 2 rip2	.1.3.6.1.4.1.81.31.1.4.1.8

This table is an extention of
vlConfTable, and is used to add/delete
DHCP Servers to/from that table.

relayEntry row .1.3.6.1.4.1.81.31.1.6.1

The information concerning one of
this entity's VLAN interfaces. An VLAN
interface is a virtual connection to a
switch.

Indexes

relayVlIndex

Column	Syntax	OID
relayVlIndex A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.6.1.1
relayVlPrimaryServerAddr The IP address of the primary server, to which the BOOTP/DHCP requests to be sent.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.6.1.2
relayVlSeconderyServerAddr The IP address of the secondary server, to which the BOOTP/DHCP requests to be sent.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.6.1.3
relayVlStatus For deleting an DHCP/BOOTP servers entry. The entry will be deleted upon deleting the corresponding VLAN	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.6.1.4
relayVlRelayAddr The IP address of the Relay, i.e. the router's IP address to write in the relayed request (giaddr field in the Bootp packet). When there are multiple IP interfaces on the same VLAN such that the router has multiple IP a…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.6.1.5

This table is used to add/delete
access control statement to/from that
table.

ipAccessControlEntry row .1.3.6.1.4.1.81.31.1.8.1

The information concerning one of
this entity's IP interfaces. An IP
interface is a logical connection to a
certain IP net/subnet.

Indexes

ipAccessControlIndex

Column	Syntax	OID
ipAccessControlIndex Entry index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.8.1.1
ipAccessControlSrcAddr The IP address of the source address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.8.1.2
ipAccessControlSrcMask The MASK address of the source address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.8.1.3
ipAccessControlDstAddr The IP address of the destination address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.8.1.4
ipAccessControlDstMask The MASK address of the destination address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.8.1.5
ipAccessControlOperation How to operate the IP ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.	Enumerationr/w Enumerated Values: 1 forward 2 block 3 blockAndReport	.1.3.6.1.4.1.81.31.1.8.1.6
ipAccessControlActivation Does the IP ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.	Enumerationr/w Enumerated Values: 1 wire-speed 2 regular	.1.3.6.1.4.1.81.31.1.8.1.7
ipAccessControlProtocol Over which protocol does the IP ACCESS CONTROL statement activate. Icmp, Tcp, Udp. None - means IP addresses only	Enumerationr/w Enumerated Values: 1 icmp 6 tcp 17 udp 256 none	.1.3.6.1.4.1.81.31.1.8.1.8
ipAccessControlApplication Over which application does the IP ACCESS CONTROL statement activate. The exception are: above1023 can work over TCP or UDP, none can't work over TCP or UDP or ICMP only none is excepted	Enumerationr/w Enumerated Values: 21 ftp 23 telnet 25 smtp 80 http 110 pop3 161 snmp 162 snmpTrap 65536 above1023 65537 none	.1.3.6.1.4.1.81.31.1.8.1.9
ipAccessControlStatus For create/delete of a IP ACCESS CONTROL statement.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.8.1.10

This table is used to update
multicast parameters over interfaces
already define

ipMulticastInterfaceEntry row .1.3.6.1.4.1.81.31.1.11.1

The information concerning one of
this entity's interfaces.

Indexes

ipMulticastInterfaceIfIndex

Column	Syntax	OID
ipMulticastInterfaceIfIndex A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.11.1.1
ipMulticastInterfaceSendAll The user will be able to configure whenever to send the all Multicast packets to this interface. Enable - Enable the user to define this interface, over all the existing groups Disab…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.11.1.2
ipMulticastInterfaceState The mandatory state (operational) of the IP Multicast from IP Multicast point of view. It depends on global ipMRouteEnable status and Multicast interface status. Inactive - set by the device (status), …	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.81.31.1.11.1.3
ipMulticastInterfaceStatus For enable/disable of a IP multicast over an interface.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.11.1.4

This table is used to create distribution 
list for import and exporting route updates

distributionListEntry row .1.3.6.1.4.1.81.31.1.12.1

The information concerning each entry in the
distribution list

Indexes

distributionListRoutingProtocol distributionListDirection distributionListIfIndex distributionListRouteProtocol distributionListProtocolSpecific1 distributionListProtocolSpecific2 distributionListProtocolSpecific3 distributionListProtocolSpecific4 distributionListProtocolSpecific5

Column	Syntax	OID
distributionListRoutingProtocol Specifies which routing protocol we are configuring this distribution list for	Enumeration Enumerated Values: 1 rip 2 ospf 3 bgp4	.1.3.6.1.4.1.81.31.1.12.1.1
distributionListDirection Specifies whether this distribution list entry applies to import or export route updates	Enumeration Enumerated Values: 1 import 2 export	.1.3.6.1.4.1.81.31.1.12.1.2
distributionListIfIndex Specifies the interface for incoming and outgoing updates on which to apply this distribution list. Relevant for RIP import/export and OSPF import policies, otherwise zero for if index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.12.1.3
distributionListRouteProtocol Specifies to which routing protocols to apply this distribution list on outgoing updates	Enumeration Enumerated Values: 1 all 2 static 3 rip 4 ospf 5 connected 6 bgp4	.1.3.6.1.4.1.81.31.1.12.1.4
distributionListProtocolSpecific1 Specifies a routing protocol specific parameter	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.12.1.5
distributionListProtocolSpecific2 Specifies a routing protocol specific parameter	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.12.1.6
distributionListProtocolSpecific3 Specifies a routing protocol specific parameter	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.12.1.7
distributionListProtocolSpecific4 Specifies a routing protocol specific parameter	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.12.1.8
distributionListProtocolSpecific5 Specifies a routing protocol specific parameter	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.12.1.9
distributionListAccessListNumber Specifies the access list number attached to this distribution list	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.12.1.10
distributionListEntryStatus For adding and deleting distribution list entries	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.12.1.11

IPHC table

iphcControlEntry row .1.3.6.1.4.1.81.31.1.15.1.1

An list of iphc configuration parameters

Indexes

iphcIfIndex

Column	Syntax	OID
iphcIfIndex This object represents the interface index of the interface for which iphc parameters are configured.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.1
iphcControlTcpAdminStatus This object determines whether tcp header compression is enabled on this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.15.1.1.2
iphcTcpSessions The maximum number of context identifiers for TCP connections on this interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.3
iphcNegotiatedTcpSessions The negotiated number of context identifiers for TCP connections on this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.4
iphcControlRtpAdminStatus This object determines whether rtp header compression is enabled on this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.15.1.1.5
iphcRtpSessions The maximum number of context identifiers for RTP connections on this interface. 0 means that no RTP headers will be compressed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.6
iphcNegotiatedRtpSessions The negotiated number of context identifiers for Rtp connections on this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.7
iphcControlNonTcpAdminStatus This object determines whether non tcp header compression is enabled on this interface.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.1.15.1.1.8
iphcNonTcpSessions The maximum number of context identifiers for non-TCP, non RTP connections on this interface. 0 means that no non-tcp, non-rtp headers will be compressed.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.9
iphcNegotiatedNonTcpSessions The negotiated number of context identifiers for non-TCP, non-RTP connections on this interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.10
iphcMaxPeriod The maximum number of compressed packets that can be sent between full headers.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.11
iphcMaxTime The maximum number of seconds between full headers.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.15.1.1.12
iphcControRtpMinPortNumber The minimal UDP destination port number to be considered as RTP traffic.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.81.31.1.15.1.1.13
iphcControRtpMaxPortNumber The maximal UDP destination port number to be considered as RTP traffic.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.81.31.1.15.1.1.14
iphcControlRtpCompressionRatio The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for RTP header compression.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.81.31.1.15.1.1.15
iphcControlNonTcpMode The non-TCP compression mode. ietf - standard according to RFC 2507. other - D-bit is set, but the order of the random fields is inverted	Enumerationr/w Enumerated Values: 1 ietf 2 other	.1.3.6.1.4.1.81.31.1.15.1.1.16
iphcControlTcpCompressionRatio The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for TCP header compression.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.81.31.1.15.1.1.17
iphcControlTotalCompressionRatio The average ratio between the compressed header size and the original header size on this interface. The value is expressed as a percentage value. Used for the total TCP/RTP/UDP Header compression.	Integer32 Constraints: range: 0-100	.1.3.6.1.4.1.81.31.1.15.1.1.18

This table provides an extension to
the standard OSPF Interface Table, ospfIfTable,
as defined in RFC 1253, RFC1850.

ospfXtndIfEntry row .1.3.6.1.4.1.81.31.1.16.1

An entry describes one interface from the view
point of OSPF.

Indexes

ospfXtndIfIpAddress ospfXtndIfAddressLessIf

Column	Syntax	OID
ospfXtndIfIpAddress Equivalent to ospfIfIpAddress in the standard ospfIfTable. The IP address of this OSPF interface.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.16.1.1
ospfXtndIfAddressLessIf Equivalent to ospfAddressLessIf in the standard ospfIfTable. For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addre…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.16.1.2
ospfXtndIfPassiveMode determines whether this OSPF interface is in active or passive mode.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.81.31.1.16.1.3

This table configures the next hop lists parameters.

nextHopListEntry row .1.3.6.1.4.1.81.31.1.17.1.1

next Hop list parameters.

Indexes

nextHopListIndex

Column	Syntax	OID
nextHopListIndex next Hop List Index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.17.1.1.1
nextHopListName next Hop list name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.81.31.1.17.1.1.2
nextHopListRowStatus Used for creation/deletion of a list and for monitoring list status. Use createAndGo (4) to create a list. Destroy (6) to destroy a list. active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), dest…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.17.1.1.3
nextHopListActive State whether the next hop list is active or not.	Enumeration Enumerated Values: 1 active 2 nonActive	.1.3.6.1.4.1.81.31.1.17.1.1.4

Next Hop IP/Interface table. 
Each next hop List may contain several next hops.

nextHopEntry row .1.3.6.1.4.1.81.31.1.17.2.1

next hop parameters.

Indexes

nextHopListIndex nextHopIndex

Column	Syntax	OID
nextHopIndex next hop index in the next hop list.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.17.2.1.1
nextHopType Type of the next hop. 1 - IP address - next jop IP address. 2 - Interface - next hop interface. 3 - Null0 - Interface Null0 for dropping packets.	Enumeration Enumerated Values: 1 iPAddress 2 interface 3 null0	.1.3.6.1.4.1.81.31.1.17.2.1.2
nextHopIP next hop IP address	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.17.2.1.3
nextHopInterface next hop interface - null0, GRE Tunnel, Serial.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.81.31.1.17.2.1.4
nextHopStatus Presents whether this next hop is available or not. 1 - UP 2 - Down The status is used to for choosing the first IP/Interface UP/Valid in the next hop list.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.81.31.1.17.2.1.5
nextHopRowStatus Used for creation/deletion of a next hop entry and for monitoring entry status. 1) create the next-hop entry by setting nextHopRowStatus==CreateAndWait At this stage the entry is NotReady 2) set either the nextHopIP o…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.17.2.1.6
nextHopTrackId Bind the status of this next hop to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that the next hop is not bound to any object-tracker. A valu…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.17.2.1.7

The OSPF Interface Table describes the  inter-
faces from the viewpoint of OSPF.

ospfCompleteIfEntry row .1.3.6.1.4.1.81.31.1.18.1

The OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF.

Indexes

ospfCompleteIfIpAddress ospfCompleteAddressLessIf

Column	Syntax	OID
ospfCompleteIfIpAddress The IP address of this OSPF interface.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.18.1.1
ospfCompleteAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces havin…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.18.1.2
ospfCompleteIfAreaId A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.	OSPF-MIBAreaIDr/w	.1.3.6.1.4.1.81.31.1.18.1.3
ospfCompleteIfType The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25…	Enumerationr/w Enumerated Values: 1 broadcast 2 nbma 3 pointToPoint 5 pointToMultipoint	.1.3.6.1.4.1.81.31.1.18.1.4
ospfCompleteIfAdminStat The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is extern…	OSPF-MIBStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.81.31.1.18.1.5
ospfCompleteIfRtrPriority The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designate…	OSPF-MIBDesignatedRouterPriorityr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.81.31.1.18.1.6
ospfCompleteIfTransitDelay The estimated number of seconds it takes to transmit a link state update packet over this interface.	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.81.31.1.18.1.7
ospfCompleteIfRetransInterval The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request …	OSPF-MIBUpToMaxAger/w Type Constraints: range: 0..3600	.1.3.6.1.4.1.81.31.1.18.1.8
ospfCompleteIfHelloInterval The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.	OSPF-MIBHelloRanger/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.81.31.1.18.1.9
ospfCompleteIfRtrDeadInterval The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for a…	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.81.31.1.18.1.10
ospfCompleteIfPollInterval The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.	OSPF-MIBPositiveIntegerr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.81.31.1.18.1.11
ospfCompleteIfState The OSPF Interface State.	Enumeration Enumerated Values: 1 down 2 loopback 3 waiting 4 pointToPoint 5 designatedRouter 6 backupDesignatedRouter 7 otherDesignatedRouter	.1.3.6.1.4.1.81.31.1.18.1.12
ospfCompleteIfDesignatedRouter The IP Address of the Designated Router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.18.1.13
ospfCompleteIfBackupDesignatedRouter The IP Address of the Backup Designated Router.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.18.1.14
ospfCompleteIfEvents The number of times this OSPF interface has changed its state, or an error has occurred.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.18.1.15
ospfCompleteIfAuthKey The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthentica…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.81.31.1.18.1.16
ospfCompleteIfStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.18.1.17
ospfCompleteIfMulticastForwarding The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NB…	Enumerationr/w Enumerated Values: 1 blocked 2 multicast 3 unicast	.1.3.6.1.4.1.81.31.1.18.1.18
ospfCompleteIfDemand Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.81.31.1.18.1.19
ospfCompleteIfAuthType The authentication type specified for an in- terface. Additional authentication types may be assigned locally.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.81.31.1.18.1.20

The TOS metrics for  a  non-virtual  interface
identified by the interface index.

ospfCompleteIfMetricEntry row .1.3.6.1.4.1.81.31.1.19.1

A particular TOS metric for a non-virtual in-
terface identified by the interface index.

Indexes

ospfCompleteIfMetricIpAddress ospfCompleteIfMetricAddressLessIf ospfCompleteIfMetricTOS

Column	Syntax	OID
ospfCompleteIfMetricIpAddress The IP address of this OSPF interface. On row creation, this can be derived from the in- stance.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.19.1.1
ospfCompleteIfMetricAddressLessIf For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Addres…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.19.1.2
ospfCompleteIfMetricTOS The type of service metric being referenced. On row creation, this can be derived from the instance.	OSPF-MIBTOSType Type Constraints: range: 0..30	.1.3.6.1.4.1.81.31.1.19.1.3
ospfCompleteIfMetricValue The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.	OSPF-MIBMetricr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.81.31.1.19.1.4
ospfCompleteIfMetricStatus This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.19.1.5

A list of subnets which require separate
status monitoring in RIP.

rip2CompleteIfStatEntry row .1.3.6.1.4.1.81.31.1.20.1

A Single Routing Domain in a single Subnet.

Indexes

rip2CompleteIfStatAddress

Column	Syntax	OID
rip2CompleteIfStatAddress The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.20.1.1
rip2CompleteIfStatRcvBadPackets The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.20.1.2
rip2CompleteIfStatRcvBadRoutes The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.20.1.3
rip2CompleteIfStatSentUpdates The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.20.1.4
rip2CompleteIfStatStatus Writing invalid has the effect of deleting this interface.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.20.1.5

A list of subnets which require separate
configuration in RIP.

rip2CompleteIfConfEntry row .1.3.6.1.4.1.81.31.1.21.1

A Single Routing Domain in a single Subnet.

Indexes

rip2CompleteIfConfAddress

Column	Syntax	OID
rip2CompleteIfConfAddress The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.21.1.1
rip2CompleteIfConfDomainobsolete Value inserted into the Routing Domain field of all RIP packets sent on this interface.	RIPv2-MIBRouteTagr/w Type Constraints: range: 2	.1.3.6.1.4.1.81.31.1.21.1.2
rip2CompleteIfConfAuthType The type of Authentication used on this interface.	Enumerationr/w Enumerated Values: 1 noAuthentication 2 simplePassword 3 md5	.1.3.6.1.4.1.81.31.1.21.1.3
rip2CompleteIfConfAuthKey The value to be used as the Authentication Key whenever the corresponding instance of rip2CompleteIfConfAuthType has a value other than noAuthentication. A modification of the corresponding instance of rip2CompleteIfCo…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.81.31.1.21.1.4
rip2CompleteIfConfSend What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implie…	Enumerationr/w Enumerated Values: 1 doNotSend 2 ripVersion1 3 rip1Compatible 4 ripVersion2 5 ripV1Demand 6 ripV2Demand	.1.3.6.1.4.1.81.31.1.21.1.5
rip2CompleteIfConfReceive This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.	Enumerationr/w Enumerated Values: 1 rip1 2 rip2 3 rip1OrRip2 4 doNotRecieve	.1.3.6.1.4.1.81.31.1.21.1.6
rip2CompleteIfConfDefaultMetric This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a defau…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.81.31.1.21.1.7
rip2CompleteIfConfStatus Writing invalid has the effect of deleting this interface.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.21.1.8
rip2CompleteIfConfSrcAddress The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2CompleteIfConfAddress. On unnumbered interfaces, it must be the value of rip…	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.21.1.9

Static Route Table

ipCidrRouteStaticEntry row .1.3.6.1.4.1.81.31.1.22.1

A particular route to a particular destina-
tion

Indexes

ipCidrRouteStaticDest ipCidrRouteStaticMask ipCidrRouteStaticIfIndex ipCidrRouteStaticNextHop ipCidrRouteStaticPreference

Column	Syntax	OID
ipCidrRouteStaticDest The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a valu…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.22.1.1
ipCidrRouteStaticMask Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteStaticDest field. For those systems that do not support arbitrary subnet masks, an age…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.22.1.2
ipCidrRouteStaticIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. Note that for regular static routes and for discard routes the ifindex is 0.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.22.1.3
ipCidrRouteStaticNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. Note that for Via interface/DHCP static routes the next-hop is 0.0.0.0.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.22.1.4
ipCidrRouteStaticPreference Preference of the static route. high(0) - High priority route. low(250) - low priority route. In case of Discard route the preference is high(0).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.22.1.5
ipCidrRouteStaticUsedIfIndex The ifIndex value which identifies the local interface through which the next hop of this route should be reached. When creating regular static route then there is no information to management application on the if…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.22.1.6
ipCidrRouteStaticUsedNextHop On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. When creating DHCP static route using the default router as next hop then when creating this route the next-hop IP address is not known by…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.1.22.1.7
ipCidrRouteStaticType Type of the static route. via (1), -- Via interface static route discard (2), -- route which discards traffic dhcp (3), -- Static route using DHCP client next hop. regular (4) -- Regular Static route	Enumeration Enumerated Values: 1 via 2 discard 3 dhcp 4 regular	.1.3.6.1.4.1.81.31.1.22.1.8
ipCidrRouteStaticCost The static route cost.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.22.1.9
ipCidrRouteStaticPermanent This MIB item conveys additional information about the route. Permanent(1) - Permanent Static route which is still active even if the next hop is down. Non-Permanent(2) - Non-Permanent Static routes which is non-active…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.1.22.1.10
ipCidrRouteStaticTrackId Bind the status of this static route to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that the static route is not bound to any object-tracker…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.81.31.1.22.1.11
ipCidrRouteStaticActive The status of the route. If it is active then it is found on the routing database and affect traffic else it is no found on the routing database and does not affect traffic.	Enumeration Enumerated Values: 1 yes 2 no	.1.3.6.1.4.1.81.31.1.22.1.12
ipCidrRouteStaticRowStatus The row status variable, used according to row installation and removal conventions. The values that are supported are destroy, create-and-wait,create-and-go, active.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.1.22.1.13

This table is an extention of Novell
mib IpxCircTable, and is used to
add/delete entries to/from that table.
In addition it contains private
objects.

ipxCircEntry row .1.3.6.1.4.1.81.31.2.1.1

The information concerning one of
this entity's IPX circuits. An IPX
circuit is a logical connection to a
certain IPX netNumber.

Indexes

ipxCircIndex

Column	Syntax	OID
ipxCircIndex The identifier of this circuit, unique within the instance of IPX. This value may be written only when creating a new entry in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.1.1.1
ipxCircNetNumber The IPX network number of this circuit.	NetNumr/w	.1.3.6.1.4.1.81.31.2.1.1.2
ipxCircLowerIfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interfac…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.81.31.2.1.1.3
ipxCircEncapsulation The media type (encapsulation of layer2) of this circuit.	Enumerationr/w Enumerated Values: 1 other 2 novell 3 ethernet 4 llc 5 snap	.1.3.6.1.4.1.81.31.2.1.1.4
ipxCircNetbios The type of the circuit.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.2.1.1.5
ipxCircStatus For adding and deleting Circuits. Deleting this row means deleting the corresponding entry in ipxCircTable. Deleting a Circuit also causes deletion of all static routes defined on this Circuit, as well as protocol Circu…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.2.1.1.6
ipxCircRipUpdate The RIP periodic update interval, in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.1.1.7
ipxCircRipAgeMultiplier The holding multiplier for information received in RIP periodic updates.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.1.1.8
ipxCircRipStatus Indicates whether RIP information may be sent/received over this circuit. Set by the user	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.2.1.1.9
ipxCircSapUpdate The SAP periodic update interval, in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.1.1.10
ipxCircSapAgeMultiplier The holding multiplier for information received in SAP periodic updates.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.1.1.11
ipxCircGetNearestServerReply Indicates whether to respond to SAP get nearest server requests received on this circuit.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.2.1.1.12
ipxCircSapStatus Indicates whether SAP information may be sent/received over this circuit.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.2.1.1.13
ipxCircRipState Indicates whether RIP information may be sent/received over this circuit. Set by the device to reflect the RIP status and the interface status	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.81.31.2.1.1.14
ipxCircSapState Indicates whether SAP information may be sent/received over this circuit. Set by the device to reflect the SAP status and the interface status	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.81.31.2.1.1.15

This table replace the Novell mib
IpxDestTable, and is used to
add/delete entries to/from that
table.

ipxDestEntry row .1.3.6.1.4.1.81.31.2.2.1

The information concerning one of
this entity's IPX Routes. An IPX
service is a logical connection to a
certain IPX Server.

Indexes

ipxDestNetNum

Column	Syntax	OID
ipxDestNetNum The IPX network number portion of the IPX address of the destination.	NetNum	.1.3.6.1.4.1.81.31.2.2.1.1
ipxDestProtocol The routing protocol from which knowledge of this destination was obtained.	Enumeration Enumerated Values: 1 other 2 local 3 rip 4 nlsp 5 static	.1.3.6.1.4.1.81.31.2.2.1.2
ipxDestTicks The delay in ticks to reach this destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.2.1.3
ipxDestHopCount The number of hops necessary to reach the destination.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.2.1.4
ipxDestNextHopCircIndex The unique identifier of the circuit, used to reach the next hop.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.2.1.5
ipxDestNextHopNICAddress The NIC address of the next hop.	RFC1213-MIBPhysAddressr/w	.1.3.6.1.4.1.81.31.2.2.1.6
ipxDestNextHopNetNum The IPX network number of the next hop.	NetNumr/w	.1.3.6.1.4.1.81.31.2.2.1.7
ipxDestStatus	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.2.2.1.8
ipxDestAge The age of the Routing table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.2.1.9

This table replace the Novell mib
IpxServTable, and is used to
add/delete entries to/from that
table.

ipxServEntry row .1.3.6.1.4.1.81.31.2.3.1

The information concerning one of
this entity's IPX Services. An IPX
service is a logical connection to a
certain IPX Server.

Indexes

ipxServType ipxServName

Column	Syntax	OID
ipxServType The service type.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.3.1.1
ipxServName The server name.	OctetString Constraints: range: 1-48	.1.3.6.1.4.1.81.31.2.3.1.2
ipxServProtocol The protocol from which knowledge of this service was obtained.	Enumeration Enumerated Values: 1 other 2 local 4 nlsp 5 static 6 sap	.1.3.6.1.4.1.81.31.2.3.1.3
ipxServNetNum The IPX network number portion of the IPX address of the service.	NetNumr/w	.1.3.6.1.4.1.81.31.2.3.1.4
ipxServNode The node portion of the IPX address of the service.	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.81.31.2.3.1.5
ipxServSocket The socket portion of the IPX address of the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.3.1.6
ipxServHopCount The number of hops to the service.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.3.1.7
ipxServStatus	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.2.3.1.8
ipxServAge The age of the SAP entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.3.1.9

This table is used to add/delete IPX
access control statement to/from that
table.

ipxAccessControlEntry row .1.3.6.1.4.1.81.31.2.5.1

The information concerning one of
this entity's IPX access control
statements.

Indexes

ipxAccessControlIndex

Column	Syntax	OID
ipxAccessControlIndex Entry index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.5.1.1
ipxAccessControlSrcAddr The IPX network of the source address.	NetNumr/w	.1.3.6.1.4.1.81.31.2.5.1.2
ipxAccessControlDstAddr The IPX network of the destination address.	NetNumr/w	.1.3.6.1.4.1.81.31.2.5.1.3
ipxAccessControlOperation How to operate the IPX ACCESS CONTROL statement, on the receiving packet. Forwards the packet, Block (Discard) the packet or block (Discard) the packet and report to the user by sending trap.	Enumerationr/w Enumerated Values: 1 forward 2 block 3 blockAndReport	.1.3.6.1.4.1.81.31.2.5.1.4
ipxAccessControlActivation Does the IPX ACCESS CONTROL statement done by HW or SW(CPU). HW - wire-speed, SW - regular.	Enumerationr/w Enumerated Values: 1 wire-speed 2 regular	.1.3.6.1.4.1.81.31.2.5.1.5
ipxAccessControlStatus For create/delete of an IPX ACCESS CONTROL statement.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.2.5.1.6

Table of input/output SAP filter
according to IPX circuit number.

ipxSapFilterEntry row .1.3.6.1.4.1.81.31.2.7.1

An entry in the SAP filter table

Indexes

ipxSapFilterID

Column	Syntax	OID
ipxSapFilterID ID of SAP filter.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.7.1.1
ipxSapFilterCircIndex .... -- 0xffff means this is a global SAP filter	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.7.1.2
ipxSapFilterServiceNetNumber Number network of the filtered service. Value 0xFFFFFFFF applies for any network. DEFVAL {0xFFFFFFFF}	NetNumr/w	.1.3.6.1.4.1.81.31.2.7.1.3
ipxSapFilterServiceType The type of the service which may be filtered; value 0xFFFF applies for all types of service and it's default DEFVAL {0xFFFF}	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.2.7.1.4
ipxSapFilterServerName The name of the service which may be filtered; wildcards (*) may be used in the end of the name. DEFVAL {*}	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.81.31.2.7.1.5
ipxSapFilterDirection Type of filter-input or output	Enumerationr/w Enumerated Values: 1 input 2 output	.1.3.6.1.4.1.81.31.2.7.1.6
ipxSapFilterAction Permit/deny receiving/transmitting of SAP entry	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.81.31.2.7.1.7
ipxSapFilterStatus ....	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.2.7.1.8

This table is an extention of MIB II
ifTable, and is used to add/delete
entries to/from that table. In
addition it contains private objects.

vlConfEntry row .1.3.6.1.4.1.81.31.3.1.1

The information concerning one of
this entity's VLAN interfaces. An VLAN
interface is a virtual connection to a
switch.

Indexes

vlConfIndex

Column	Syntax	OID
vlConfIndex A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.3.1.1.1
vlConfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interfac…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.81.31.3.1.1.2
vlConfStatus For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.3.1.1.3

For each Bridge segment an entry of
this table specifies a set of VLANs,
which it contains.

vlBridgeEntry row .1.3.6.1.4.1.81.31.3.2.1

A entry of this table specifies a
Group of VLANs and VLANs belonging to
it

Indexes

vlBridgeProtocol vlBridgeGroupIndex vlBridgeIndex

Column	Syntax	OID
vlBridgeProtocol The protocol, supported by this VLAN. The meanings of the values are: other: none of the following. This VLAN includes any protocol except the following protocols. It is a bridging VLAN.…	Enumeration Enumerated Values: 1 other 2 dec 3 netBios 4 appleTalk 5 sna 6 ipx	.1.3.6.1.4.1.81.31.3.2.1.1
vlBridgeGroupIndex A logical number, corresponded this group of VLANs	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.3.2.1.2
vlBridgeIndex A logical number, corresponded this VLAN. Each VLAN is allowed to participate in ONE group only	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.3.2.1.3
vlBridgeStatus It is used to create or delete an entry	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.3.2.1.4

This table is an extention of MIB II
ifTable, and is used to add/delete
entries to/from that table. In
addition it contains private objects.

drVlConfEntry row .1.3.6.1.4.1.81.31.5.1.1

The information concerning one of
this entity's VLAN interfaces. An VLAN
interface is a virtual connection to a
switch.

Indexes

drVlConfSlot drVlConfIndex

Column	Syntax	OID
drVlConfSlot The slot number of the module	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.5.1.1.1
drVlConfIndex A unique value for each interface. Its value ranges between 1 and the value of ifNumber. The value for each interface must remain constant at least from one re-initialization of the entity's network management system to…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.5.1.1.2
drVlConfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer int…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.81.31.5.1.1.3
drVlConfStatus For adding and deleting VLAN interfaces. Deleting this row means deleting the corresponding entry in ifTable (MIB II). Deleting a VLAN interface is allowed only if IP interface is not defined on this VLAN.	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.5.1.1.4

This table is an extention of MIB II 
IpAddrTable, and is used to add/delete entries 
to/from that table. In addition it contains
private objects.

drIpInterfaceEntry row .1.3.6.1.4.1.81.31.6.1.1

The information concerning one of this
entity's IP interfaces.
An IP interface is a logical connection to a
certain IP net/subnet.

Indexes

drIpInterfaceSlot drIpInterfaceAddr

Column	Syntax	OID
drIpInterfaceSlot The slot number of the module	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.6.1.1.1
drIpInterfaceAddr The IP address to which this entry's addressing information pertains.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.6.1.1.2
drIpInterfaceNetMask The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.6.1.1.3
drIpInterfaceLowerIfAlias This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. The alias is specified by the network manager, and provides a non-volatile 'handle' for the lower-layer interf…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.6.1.1.4
drIpInterfaceType The logical type of the interface. The default depends on the physical type. For example Ethernet and Token-Ring LANs are of type broadcast	Enumerationr/w Enumerated Values: 1 broadcast 2 nBMA 3 ptp	.1.3.6.1.4.1.81.31.6.1.1.5
drIpInterfaceForwardIpBroadcast Whether the router forwards IP directed broadcasts that are to be transmitted as link-layer broadcast to an attached net or subnet.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.6.1.1.6
drIpInterfaceBroadcastAddr The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.81.31.6.1.1.7
drIpInterfaceProxyArp When proxy ARP is enabled, the router responds to ARP requests received on one link-layer interface for an IP-address that is reachable via another link-layer interface. The response provides the router's own MAC …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.6.1.1.8
drIpInterfaceStatus For adding and deleting IP interfaces. Deleting this row means deleting the corresponding entry in IpAddrTable (MIB II). Deleting an IP interface also causes deletion of all static routes defined on this IP interfac…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.6.1.1.9
drIpInterfaceMainRouterAddr The IP address of the main router backed up on this interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.81.31.6.1.1.10
drIpInterfaceARPServerStatus Whenever to activate the ARP Server mechanism on this interface. enable - set by the user, means activate the ARP Server mechanism over this IP interface. disable - set by the user, means don't active the ARP Server…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.6.1.1.11
drIpInterfaceName The name of this interface for compatibility with cli.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.6.1.1.12
drIpInterfaceNetbiosRebroadcast How to deal with NETBIOS Broadcasts. inbound - netbios broadcasts received from the interface are rebarodcasted outbound - netbios broadcastrs are rebraodcasted to this interface. both - netbios are reb…	Enumerationr/w Enumerated Values: 1 inbound 2 outbound 3 both 4 disable	.1.3.6.1.4.1.81.31.6.1.1.13
drIpInterfaceIcmpRedirects enable - enable the sending of redirect messages if the router is forced to re-send a packet through the same interface on which it was received. disable - disable the sending of redirect messages on this interfa…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.6.1.1.14
drIpInterfaceOperStatus The operational status of this interface. up - the interface is active. down - the interface is inactive.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.81.31.6.1.1.15
drIpInterfaceDhcpRelay enable - enable the DHCP/BOOTP Relay agent for the subnet associated with this IP Interface. Requires that a relayEntry for the L2 interface over which this IP interface is defined will be defined. disable - disablesena…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.81.31.6.1.1.16

The static route table for this entity. 
The table includes all static routes, both 
active and inactive.
Note that inactive static routes are deleted 
from RFC2096 ipCidrRouteTable; Hence the need
for this private table to maintain user 
configuration about disabled routes.
The table also includes the EntID index, to 
allow for use in a distributed environment.

drStaticCidrEntry row .1.3.6.1.4.1.81.31.7.1.1

A particular route to a particular
destination, under a particular policy.

Indexes

drStaticCidrEntID drStaticCidrDest drStaticCidrMask drStaticCidrTos drStaticCidrNextHop

Column	Syntax	OID
drStaticCidrEntID The Id of the entity for which a set of rows applies. This index is provided as a mean of distributing non-related information on different entities such as physical modules. The value: The module ID (slot number).	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.81.31.7.1.1.1
drStaticCidrDest Equivalent to ipCidrRouteDest. The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a va…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.7.1.1.2
drStaticCidrMask Equivalent to ipCidrRouteMask. Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the drStaticCidrDest field. For those systems that do not support arbi…	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.7.1.1.3
drStaticCidrTos Equivalent to ipCidrRouteTos. The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.81.31.7.1.1.4
drStaticCidrNextHop Equivalent to ipCidrRouteNextHop. On remote routes, the address of the next system en route; Otherwise, 0.0.0.0.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.81.31.7.1.1.5
drStaticCidrIfIndex Equivalent to ipCidrRouteIfIndex. The ifIndex value which identifies the local interface through which the next hop of this route should be reached.	Integer32r/w Constraints: range: -2147483648-2147483647	.1.3.6.1.4.1.81.31.7.1.1.6
drStaticCidrType Equivalent to ipCidrRouteType. The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final desti…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 local 4 remote	.1.3.6.1.4.1.81.31.7.1.1.7
drStaticCidrMetric1 Equivalent to ipCidrRouteMetric1. The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's drStaticCidrProto value. If this metric…	Integer32r/w Constraints: range: -2147483648-2147483647	.1.3.6.1.4.1.81.31.7.1.1.8
drStaticCidrPrecedence Equivalent to ipCidrRouteMetric5 (Avaya use of it). The precedence of this routing rule, compared to other routes which may have been learned vie other methods. Translates into ipCidrRouteMetric5 in ipCidrRouteTabl…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.81.31.7.1.1.9
drStaticCidrCRPType The internal type of this static routing entry. routingFWLB - Route to a group of routing Firewalls bridgingFWLB - Route through a group of bridging Firewalls regularStatic - Regular static routes	Enumerationr/w Enumerated Values: 1 routingFWLB 2 bridgingFWLB 3 regularStatic	.1.3.6.1.4.1.81.31.7.1.1.10
drStaticCidrOperStatus The operational status of this route. up - the route is active, and is present in ipCidrRouteTable. down - the route is inactive; it is not present in ipCidrRouteTable.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.81.31.7.1.1.11
drStaticCidrName A label given to this route by the user. Has no equivalent in ipCidrRouteTable.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.81.31.7.1.1.12
drStaticOwner The user who is responsible for the entry. Management Apps should write: 'user on host' CLI should write:CLI_User on local device	OctetStringr/w Constraints: range: 0-80	.1.3.6.1.4.1.81.31.7.1.1.13
drStaticCidrStatus Creation, activation, de-activation and deletion of a static route, using the RowStatus convention: active(1), notInService(2) , notReady(3), createAndGo(4), createAndWait(5), destroy(6). when an entry is placed in t…	RowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy	.1.3.6.1.4.1.81.31.7.1.1.14