CISCO-SDSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
124

cSdslLineTable

table
.1.3.6.1.4.1.9.9.155.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslLineTable' 
This table contains the enterprise-specific common attributes
describing both ends of SDSL lines supported by the system.
cSdslLineEntry row .1.3.6.1.4.1.9.9.155.1.1.1
A set of enterprise-specific common attributes describing both
ends of an SDSL line supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslLineCoding
Specifies encoding of signal used by this line. Other types
may be added in the future.
Enumeration
Enumerated Values:
1other
2base2b1q
3tcPam
4optis
5cap
 .1.3.6.1.4.1.9.9.155.1.1.1.1
cSdslLineFraming
This object specifies the current Transmission Convergence
framing structure being used by the interface.
Enumeration
Enumerated Values:
1none
2other
3hdsl
4gShdsl
5hdsl2
6ds1
 .1.3.6.1.4.1.9.9.155.1.1.1.2
cSdslLineSpecific
This object specifies an object identifier of an instance of
an object in the MIB. The implementation determines the
application of this object. For example, an implementation
may use this object to provide a referen…
SNMPv2-TCVariablePointer
Description:
A pointer to a specific object instance. For example,
sysContact.0 or ifInOctets.3.
 .1.3.6.1.4.1.9.9.155.1.1.1.3

cSdslStucPhysTable

table
.1.3.6.1.4.1.9.9.155.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslStucPhysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslStucPhysTable' 
This table contains enterprise-specific physical layer
parameters for STU-C class devices supported by the system.
cSdslStucPhysEntry row .1.3.6.1.4.1.9.9.155.1.2.1
A set of enterprise-specific physical-layer parameters for an
STU-C class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslStucInvSerialNumber
This object specifies the vendor specific string that
identifies the vendor STU-C.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.155.1.2.1.1
cSdslStucInvVendorId
This object specifies the vendor identifier assigned according
to T1.220
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.9.9.155.1.2.1.2
cSdslStucInvVersionNumber
This object specifies the vendor specific version number of
the STU-C.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.9.9.155.1.2.1.3
cSdslStucState
This object specifies the state of the STU-C transceiver.
Enumeration
Enumerated Values:
1other
2idle
3training
4steadyState
5testing
6downloading
7downloadFailed
 .1.3.6.1.4.1.9.9.155.1.2.1.4
cSdslStucDefect
This object specifies any possible defects currently being
exhibited by the STU-C.

This object has the intention of supplementing ifOperStatus.
SdslStuxDefect
Type Values:
0lossOfSignal
1lossOfSignalQuality
2noPeerStuPresent
3lossOfSyncFailure
 .1.3.6.1.4.1.9.9.155.1.2.1.5
cSdslStucCurrRate
This object specifies the rate the STU-C transceiver was
able to obtain following training.
bpsInteger32
Constraints:
range: 0-2320000
 .1.3.6.1.4.1.9.9.155.1.2.1.6
cSdslStucCurrSnrMgn
This object specifies the SNR margin as seen by this STU-C with
respect to its received signal.
tenth dBSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.2.1.7
cSdslStucCurrGaindeprecated
This object specifies gain applied to this STU-C's receiver.
This object is deprecated by cSdslStucCurrGainRev which has
no specified range.
tenth dBInteger32
Constraints:
range: -200-200
 .1.3.6.1.4.1.9.9.155.1.2.1.8
cSdslStucCurrOutputPwr
This object specifies the measured total output power
transmitted by this STU-C. This is the measurement that was
reported during the last activation sequence.
tenth dBmSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.2.1.9
cSdslStucCurrAtn
Measured difference in the total power transmitted by
the peer STU-R and the total power received by this STU-C.
tenth dBmSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.2.1.10
cSdslStucCurrGainRev
This object specifies gain applied to this STU-C's receiver.
This object deprecates cSdslStucCurrGainRev and has
no specified range.
tenth dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.155.1.2.1.11

cSdslSturPhysTable

table
.1.3.6.1.4.1.9.9.155.1.3 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslSturPhysTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslSturPhysTable' 
This table contains enterprise-specific physical layer
parameters for STU-R class devices supported by the system.
          
--      Note to implementor:
--      If the implementation does not support remote management
--      of STU-R class devices, then the agent must respond with
--      the appropriate error indicating that the instance does not
--      exist; that is, 'noSuchName' in response to a SNMPv1 get
--      request, 'noSuchInstance' in response to a SNMPv2 get
--      request or a null string for string types.
cSdslSturPhysEntry row .1.3.6.1.4.1.9.9.155.1.3.1
A set of enterprise-specific physical-layer parameters for an
STU-R class device supported by the system. There exists an
entry for each ifEntry with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslSturInvSerialNumber
This object specifies the vendor specific string that
identifies the vendor STU-R.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.9.9.155.1.3.1.1
cSdslSturInvVendorId
This object specifies the vendor identifier assigned according
to T1.220
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.9.9.155.1.3.1.2
cSdslSturInvVersionNumber
This object specifies the vendor specific version number of
the STU-R.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.9.9.155.1.3.1.3
cSdslSturState
This object specifies the state of the STU-R transceiver.
Enumeration
Enumerated Values:
1other
2training
3steadyState
 .1.3.6.1.4.1.9.9.155.1.3.1.4
cSdslSturDefect
This object specifies any possible defects currently being
exhibited by the STU-R.

This object has the intention of supplementing ifOperStatus.
SdslStuxDefect
Type Values:
0lossOfSignal
1lossOfSignalQuality
2noPeerStuPresent
3lossOfSyncFailure
 .1.3.6.1.4.1.9.9.155.1.3.1.5
cSdslSturCurrRate
This object specifies the rate the STU-R transceiver was
able to obtain following training.
bpsInteger32
Constraints:
range: 0-2320000
 .1.3.6.1.4.1.9.9.155.1.3.1.6
cSdslSturCurrSnrMgn
This object specifies the SNR margin as seen by this STU-R with
respect to its received signal.
tenth dBSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.3.1.7
cSdslSturCurrGaindeprecated
This object specifies gain applied to this STU-R's receiver.
This object is deprecated by cSdslSturCurrGainRev which has
no specified range.
tenth dBInteger32
Constraints:
range: -200-200
 .1.3.6.1.4.1.9.9.155.1.3.1.8
cSdslSturCurrOutputPwr
This object specifies the measured total output power
transmitted by this STU-R. This is the measurement that was
reported during the last activation sequence.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.3.1.9
cSdslSturCurrAtn
Measured difference in the total power transmitted by
the peer STU-C and the total power received by this STU-R
tenth dBmSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.3.1.10
cSdslSturCurrGainRev
This object specifies gain applied to this STU-R's receiver.
This object deprecates by cSdslSturCurrGain and has
no specified range.
tenth dBSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.155.1.3.1.11

cSdslStucPerfDataTable

table
.1.3.6.1.4.1.9.9.155.1.6 · 1 row entry · 37 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslStucPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslStucPerfDataTable' 
This table contains physical-layer statistics for STU-C class
devices supported by the system.
cSdslStucPerfDataEntry row .1.3.6.1.4.1.9.9.155.1.6.1
A set of physical-layer statistics for an STU-C class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslStucPerfLOSs
This object specifies the number of LOS failures experienced
by the STU-C since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.1
cSdslStucPerfLOSQs
This object specifies the number of LOSQ failures experienced
by the STU-C since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.2
cSdslStucPerfCVs
This object specifies the number of coding violations
experienced by the STU-C since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.3
cSdslStucPerfESs
This object specifies the number of errored seconds
experienced by the STU-C since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.4
cSdslStucPerfSESs
This object specifies the number of severely errored
seconds experienced by the STU-C since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.5
cSdslStucPerfUASs
This object specifies the number of unavailable seconds
experienced by the STU-C since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.6
cSdslStucPerfInits
This object specifies the number of line initializations
attempted by the STU-C since agent reset. This value includes
both successful and failed attempts.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.7
cSdslStucUnavailRsrcs
This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.6.1.8
cSdslStucPerfValidIntervals
The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complet…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.9.155.1.6.1.9
cSdslStucPerfInvalidIntervals
The number of near-end performance data 15-minute intervals in
the range from 0 to cSdslStucPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some i…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.9.155.1.6.1.10
cSdslStucPerfCurr15MinTimeElapse
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum valu…
secondsUnsigned32
Constraints:
range: 0-899
 .1.3.6.1.4.1.9.9.155.1.6.1.11
cSdslStucPerfCurr15MinLOSs
This object specifies the number of seconds in the current
15-minute interval when the STU-C experienced LOS.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.12
cSdslStucPerfCurr15MinLOSQs
This object specifies the number of seconds in the current
15-minute interval when the STU-C experienced LOSQ.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.13
cSdslStucPerfCurr15MinCVs
This object specifies the number of coding violations
experienced by the STU-C in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.14
cSdslStucPerfCurr15MinESs
This object specifies the number of errored seconds
experienced by the STU-C in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.15
cSdslStucPerfCurr15MinSESs
This object specifies the number of severely errored seconds
experienced by the STU-C in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.16
cSdslStucPerfCurr15MinUASs
This object specifies the number of unavailable seconds
experienced by the STU-C in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.17
cSdslStucPerfCurr15MinInits
This object specifies the number of line initializations
attempted by the STU-C in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.18
cSdslStucPerfCurr15MinUnavlRsrcs
This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the current 15 minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.6.1.19
cSdslStucPerfCurr1DayTimeElapsed
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum valu…
secondsUnsigned32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.9.9.155.1.6.1.20
cSdslStucPerfCurr1DayLOSs
This object specifies the number of seconds experienced by the
STU-C in the current 1-day interval when there was LOS.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.21
cSdslStucPerfCurr1DayLOSQs
This object specifies the number of seconds experienced by the
STU-C in the current 1-day interval when there was LOSQ.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.22
cSdslStucPerfCurr1DayCVs
This object specifies the number of coding violations
experienced by the STU-C in the current 1-day interval.
SdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.23
cSdslStucPerfCurr1DayESs
This object specifies the number of errored seconds
experienced by the STU-C in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.24
cSdslStucPerfCurr1DaySESs
This object specifies the number of severely errored seconds
experienced by the STU-C in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.25
cSdslStucPerfCurr1DayUASs
This object specifies the number of unavailable seconds
experienced by the STU-C in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.26
cSdslStucPerfCurr1DayInits
This object specifies the number of line initializations
attempted by the STU-C in the current 1-day interval.
SdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.27
cSdslStucPerfCurr1DayUnavlRsrcs
This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the current 1-day interval.
SdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.6.1.28
cSdslStucPerfPrev1DayMoniSecs
The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monit…
secondsInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.9.9.155.1.6.1.29
cSdslStucPerfPrev1DayLOSs
This object specifies the number of seconds in the current
1-day interval when the STU-C experienced LOS.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.30
cSdslStucPerfPrev1DayLOSQs
This object specifies the number of seconds in the previous
1-day interval when the STU-C experienced LOSQ.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.31
cSdslStucPerfPrev1DayCVs
This object specifies the number of coding violations
experienced by the STU-C in the previous 1-day interval.
SdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.32
cSdslStucPerfPrev1DayESs
This object specifies the number of errored seconds
experienced by the STU-C in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.33
cSdslStucPerfPrev1DaySESs
This object specifies the number of severely errored seconds
experienced by the STU-C in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.34
cSdslStucPerfPrev1DayUASs
This object specifies the number of unavailable seconds
experienced by the STU-C in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.35
cSdslStucPerfPrev1DayInits
This object specifies the number of line initializations
attempted by the STU-C in the previous 1-day interval.
SdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.36
cSdslStucPerfPrev1DayUnavlRsrcs
This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space, in the previous 1-day interval.
SdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.6.1.37

cSdslSturPerfDataTable

table
.1.3.6.1.4.1.9.9.155.1.7 · 1 row entry · 29 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslSturPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslSturPerfDataTable' 
This table contains physical-layer statistics for STU-R class
devices supported by the system.
          
--      Note to implementor:
--      If the implementation does not support remote management
--      of STU-R class devices, then the agent must respond with
--      the appropriate error indicating that the instance does not
--      exist; that is, 'noSuchName' in response to a SNMPv1 get
--      request, and 'noSuchInstance' in response to a SNMPv2 get
--      request.
cSdslSturPerfDataEntry row .1.3.6.1.4.1.9.9.155.1.7.1
A set of physical-layer statistics for an STU-R class device
supported by the system. There exists an entry for each ifEntry
with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslSturPerfLOSs
This object specifies the number of LOS failures experienced
by the STU-R since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.1
cSdslSturPerfLOSQs
This object specifies the number of LOSQ failures experienced
by the STU-R since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.2
cSdslSturPerfCVs
This object specifies the number of coding violations
experienced by the STU-R since agent reset.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.3
cSdslSturPerfESs
This object specifies the number of errored seconds
experienced by the STU-R since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.4
cSdslSturPerfSESs
This object specifies the number of severely errored
seconds experienced by the STU-R since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.5
cSdslSturPerfUASs
This object specifies the number of unavailable seconds
experienced by the STU-R since agent reset.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.155.1.7.1.6
cSdslSturPerfValidIntervals
The number of previous far end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complete…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.9.155.1.7.1.7
cSdslSturPerfInvalidIntervals
The number of far-end performance data 15-minute intervals in
the range from 0 to cSdslSturPerfValidIntervals for which no
data is available. This object will typically be zero except in
cases where the data for some in…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.9.155.1.7.1.8
cSdslSturPerfCurr15MinTimeElapse
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum valu…
secondsUnsigned32
Constraints:
range: 0-899
 .1.3.6.1.4.1.9.9.155.1.7.1.9
cSdslSturPerfCurr15MinLOSs
This object specifies the number of seconds in the current
15-minute interval when the STU-R experienced LOS.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.10
cSdslSturPerfCurr15MinLOSQs
This object specifies the number of seconds in the current
15-minute interval when the STU-R experienced LOSQ.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.11
cSdslSturPerfCurr15MinCVs
This object specifies the number of coding violations
experienced by the STU-R in the current 15-minute interval.
PerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.12
cSdslSturPerfCurr15MinESs
This object specifies the number of errored seconds
experienced by the STU-R in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.13
cSdslSturPerfCurr15MinSESs
This object specifies the number of severely errored seconds
experienced by the STU-R in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.14
cSdslSturPerfCurr15MinUASs
This object specifies the number of unavailable seconds
experienced by the STU-R in the current 15-minute interval.
secondsPerfHist-TC-MIBPerfCurrentCount .1.3.6.1.4.1.9.9.155.1.7.1.15
cSdslSturPerfCurr1DayTimeElapsed
The number of seconds that have elapsed since the beginning of
the current measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum valu…
secondsUnsigned32
Constraints:
range: 0-86399
 .1.3.6.1.4.1.9.9.155.1.7.1.16
cSdslSturPerfCurr1DayLOSs
This object specifies the number of seconds experienced by the
STU-R in the current 1-day interval when there was LOS.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.17
cSdslSturPerfCurr1DayLOSQs
This object specifies the number of seconds experienced by the
STU-R in the current 1-day interval when there was LOSQ.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.18
cSdslSturPerfCurr1DayCVs
This object specifies the number of coding violations
experienced by the STU-R in the current 1-day interval.
SdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.19
cSdslSturPerfCurr1DayESs
This object specifies the number of errored seconds
experienced by the STU-R in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.20
cSdslSturPerfCurr1DaySESs
This object specifies the number of severely errored seconds
experienced by the STU-R in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.21
cSdslSturPerfCurr1DayUASs
This object specifies the number of unavailable seconds
experienced by the STU-R in the current 1-day interval.
secondsSdslPerfCurrDayCount .1.3.6.1.4.1.9.9.155.1.7.1.22
cSdslSturPerfPrev1DayMoniSecs
The amount of time in the previous 1-day interval over which
the performance monitoring information is actually counted.
This value will be the same as the interval duration except
in a situation where performance monit…
secondsInteger32
Constraints:
range: 0-86400
 .1.3.6.1.4.1.9.9.155.1.7.1.23
cSdslSturPerfPrev1DayLOSs
This object specifies the number of seconds in the current
1-day interval when the STU-R experienced LOS.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.24
cSdslSturPerfPrev1DayLOSQs
This object specifies the number of seconds in the previous
1-day interval when the STU-R experienced LOSQ.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.25
cSdslSturPerfPrev1DayCVs
This object specifies the number of coding violations
experienced by the STU-R in the previous 1-day interval.
SdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.26
cSdslSturPerfPrev1DayESs
This object specifies the number of errored seconds
experienced by the STU-R in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.27
cSdslSturPerfPrev1DaySESs
This object specifies the number of severely errored seconds
experienced by the STU-R in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.28
cSdslSturPerfPrev1DayUASs
This object specifies the number of unavailable seconds
experienced by the STU-R in the previous 1-day interval.
secondsSdslPerfPrevDayCount .1.3.6.1.4.1.9.9.155.1.7.1.29

cSdslStucIntervalTable

table
.1.3.6.1.4.1.9.9.155.1.8 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslStucIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslStucIntervalTable' 
This table contains physical-layer statistics intervals for
STU-C class devices supported by the system.  The interval
	tables are modeled after RFC 2493, Textual Conventions for 
	MIB Modules Using Performance History Based on 15 Minute 
	Intervals, RFC 2493
cSdslStucIntervalEntry row .1.3.6.1.4.1.9.9.155.1.8.1
A 15-miute interval of physical-layer statistics for a STU-C
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslStucIntervalNumber
The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.9.9.155.1.8.1.1
cSdslStucIntervalValidData
This object specifies whether the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.155.1.8.1.2
cSdslStucIntervalLOSs
This object specifies the number of seconds in the interval
when the STU-C experienced LOS.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.3
cSdslStucIntervalLOSQs
This object specifies the number of seconds in the interval
when the STU-C experienced LOSQ.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.4
cSdslStucIntervalCVs
This object specifies the number of coding violations
experienced by the STU-C in the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.5
cSdslStucIntervalESs
This object specifies the number of errored seconds
experienced by the STU-C in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.6
cSdslStucIntervalSESs
This object specifies the number of severely errored seconds
experienced by the STU-C in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.7
cSdslStucIntervalUASs
This object specifies the number of unavailable seconds
experienced by the STU-C in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.8
cSdslStucIntervalInits
This object specifies the number of line initializations
attempted by the STU-C in the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.9
cSdslStucIntervalUnavlRsrcs
This object specifies the number of packets discarded on the
STU-C due to unavailable resources, such as lack of buffer
space in the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.8.1.10

cSdslSturIntervalTable

table
.1.3.6.1.4.1.9.9.155.1.9 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslSturIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslSturIntervalTable' 
This table contains physical-layer statistics intervals for
STU-R class devices supported by the system.  The interval
	tables are modeled after RFC 2493, Textual Conventions for 
	MIB Modules Using Performance History Based on 15 Minute 
	Intervals, RFC 2493
cSdslSturIntervalEntry row .1.3.6.1.4.1.9.9.155.1.9.1
A 15-miute interval of physical-layer statistics for a STU-R
class device supported by the system. There exists up to 96
entries for each ifEntry with an ifType of sdsl(96).
Indexes
Column Syntax OID
cSdslSturIntervalNumber
The interval in which the statistics were collected, where the
value of 1 represents the most recent interval, and the value of
96 represents the interval collected 24 hours ago. Intervals
2..96 are optional.
Integer32
Constraints:
range: 1-96
 .1.3.6.1.4.1.9.9.155.1.9.1.1
cSdslSturIntervalValidData
This object specifies whether the data for this interval
is valid.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.155.1.9.1.2
cSdslSturIntervalLOSs
This object specifies the number of seconds in the interval
when the STU-R experienced LOS.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.3
cSdslSturIntervalLOSQs
This object specifies the number of seconds in the interval
when the STU-R experienced LOSQ.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.4
cSdslSturIntervalCVs
This object specifies the number of coding violations
experienced by the STU-R in the interval.
PerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.5
cSdslSturIntervalESs
This object specifies the number of errored seconds
experienced by the STU-R in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.6
cSdslSturIntervalSESs
This object specifies the number of severely errored seconds
experienced by the STU-R in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.7
cSdslSturIntervalUASs
This object specifies the number of unavailable seconds
experienced by the STU-R in the interval.
secondsPerfHist-TC-MIBPerfIntervalCount .1.3.6.1.4.1.9.9.155.1.9.1.8

cSdslLineConfProfileTable

table
.1.3.6.1.4.1.9.9.155.1.14 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslLineConfProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslLineConfProfileTable' 
This table extends the adslLineConfProfileTable and contains
enterprise-specific SDSL line configuration information.
cSdslLineConfProfileEntry row .1.3.6.1.4.1.9.9.155.1.14.1
A configuration profile containing enterprise-specific SDSL
line configuration information.
Indexes
Column Syntax OID
cSdslLineMaxRate
This object specifies the desired line rate which the STU-C
will attempt to train at.
bpsInteger32r/w
Constraints:
range: 1552000-1552000
range: 144000-144000
range: 272000-272000
range: 400000-400000
range: 528000-528000
range: 784000-784000
range: 1040000-1040000
range: 1168000-1168000
range: 2064000-2064000
range: 2320000-2320000
 .1.3.6.1.4.1.9.9.155.1.14.1.1
cSdslLineFramingMode
This object specifies the desired Transmission Convergence
framing structure being used by the interface.
Enumerationr/w
Enumerated Values:
1none
2other
3hdsl
4gShdsl
5hdsl2
6ds1
 .1.3.6.1.4.1.9.9.155.1.14.1.2
cSdslStucTargetSnrMgn
This object specifies the target SNR margin. This is the
desired noise margin the STU-C must achieve with a BER of
10-7 or better to successfully complete training. The value
for this object must be in multiples of 1…
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.14.1.3
cSdslStucMaxSnrMgn
This object specifies the maximum acceptable SNR margin.
If the noise margin exceeds this level, then the STU-C should
attempt to reduce its power output to optimize its operation.
The value for this object must be in…
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.14.1.4
cSdslStucMinSnrMgn
This object specifies the minimum acceptable SNR margin.
If the noise margin falls below this level, the STU-C will
retrain. The value for this object must be in multiples of 10.
The specified value will be rounded do…
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.14.1.5
cSdslStucOutputPwr
This object specifies the transmit power level used by
the STU-C. The value for this object must be in multiples
of 10. The specified value will be rounded down to the
nearest valid tenth dB level if the value is no…
tenth dBmInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.14.1.6
cSdslShdslLineMaxRate
This object specifies the desired line rate at which the
G.shdsl STU-C will attempt to train.
bpsEnumerationr/w
Enumerated Values:
72000r72000
136000r136000
200000r200000
264000r264000
392000r392000
520000r520000
776000r776000
784000r784000
1032000r1032000
1160000r1160000
1544000r1544000
1552000r1552000
2056000r2056000
2312000r2312000
2376000r2376000
 .1.3.6.1.4.1.9.9.155.1.14.1.7
cSdslStucPsdMaskType
This object specifies the PSD mask type for the transceiver.
For all values of the cSdslShdslLineMaxRate, the symmetric PSD
masktype is selectable. Asymmetric mask is only selectable for
the following rates: 776000, …
Enumerationr/w
Enumerated Values:
1symmetric
2asymmetric
 .1.3.6.1.4.1.9.9.155.1.14.1.8
cSdslStucAnnex
This object specifies the operating conditions for the port
of G.shdsl CO equipment . Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for condit…
Enumerationr/w
Enumerated Values:
1annexA
2annexB
 .1.3.6.1.4.1.9.9.155.1.14.1.9
cSdslLineEquipmentType
This object specifies the type of the STU device ,either
STU-C or STU-R
Enumerationr/w
Enumerated Values:
1stuR
2stuC
 .1.3.6.1.4.1.9.9.155.1.14.1.10
cSdslLineAutoRateEnable
This object specifies whether the device uses the rate
adaptive training mode.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.155.1.14.1.11
cSdslStucThresholdSnrMgn
This object specifies the SNR margin threshold. An
appropriate alarm should be generated when the difference
between the actual SNR and the SNR required to maintain BER
of 10E-7 is less than this value. The value fo…
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.14.1.12
cSdslSturAnnex
This object specifies the operating conditions for the port
of G.shdsl CPE equipment. Annex A is optimized for conditions
typically encountered within the North American network,whereas
Annex B is optimized for condit…
Enumerationr/w
Enumerated Values:
1annexA
2annexB
 .1.3.6.1.4.1.9.9.155.1.14.1.13

cSdslLineAlarmConfProfileTable

table
.1.3.6.1.4.1.9.9.155.1.15 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cSdslLineAlarmConfProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-SDSL-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-SDSL-LINE-MIB::cSdslLineAlarmConfProfileTable' 
This table extends the adslLineAlarmConfProfileTable and
contains enterprise-specific SDSL line configuration information
pertaining to alarms.
cSdslLineAlarmConfProfileEntry row .1.3.6.1.4.1.9.9.155.1.15.1
A configuration profile containing enterprise-specific SDSL
line configuration information pertaining to alarms
Indexes
Column Syntax OID
cSdslStucThreshMinRate
This object specifies the line rate threshold. When the
agent observes the line rate fall below this value, an
appropriate alarm should be generated.

The default value for this object should be the value…
bpsInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.15.1.1
cSdslStucThreshMinSnrMgn
This object specifies the SNR margin threshold. When the
agent observes the received SNR margin fall below this value,
an appropriate alarm should be generated.

If the agent implements the CISCO-ENTITY-A…
tenth dBInteger32r/w
Constraints:
range: 0-310
 .1.3.6.1.4.1.9.9.155.1.15.1.2