ADSL-LINE-MIB

Monitored by Observium
        The MIB module defining objects for the management of a pair of
ADSL modems at each end of the ADSL line.  Each such line has
        
an entry in an ifTable which may include multiple modem lines.
An agent may reside at either end of the ADSL line however the
MIB is designed to require no management communication between
them beyond that inherent in the low-level ADSL line protocol.
The agent may monitor and control this protocol for its needs.
        
ADSL lines may support optional Fast or Interleaved channels.
If these are supported, additional entries corresponding to the
supported channels must be created in the ifTable. Thus an ADSL
line that supports both channels will have three entries in the
ifTable, one for each physical, fast, and interleaved, whose
ifType values are equal to adsl(94), fast(125), and
interleaved(124), respectively. The ifStackTable is used to
represent the relationship between the entries.
        
Naming Conventions:
          Atuc -- (ATUC) modem at near (Central) end of line
          Atur -- (ATUR) modem at Remote end of line
          Curr -- Current
          Prev -- Previous
          Atn -- Attenuation
          ES  -- Errored Second.
          LCS -- Line Code Specific
          Lof -- Loss of Frame
          Lol -- Loss of Link
          Los -- Loss of Signal
          Lpr -- Loss of Power
          xxxs-- interval of Seconds in which xxx occurs
                  (e.g., xxx=Lof, Los, Lpr)
          Max -- Maximum
          Mgn -- Margin
          Min -- Minimum
          Psd -- Power Spectral Density
          Snr -- Signal to Noise Ratio
          Tx  -- Transmit
          Blks-- Blocks, a data unit, see
                 adslAtuXChanCrcBlockLength
          
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Ports
Explore Observium network monitoring
Source file
ADSL-LINE-MIB
Last revised
Identity
adslMIB
Base OID
1.3.6.1.2.1.10.94
Imported Objects
ADSL-TC-MIB AdslLineCodingType AdslPerfCurrDayCount AdslPerfPrevDayCount AdslPerfTimeElapsed
IF-MIB ifIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission Unsigned32
SNMPv2-TC RowStatus TruthValue VariablePointer
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ADSL-LINE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ADSL-LINE-MIB::adslMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ADSL-LINE-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ADSL-LINE-MIB::adslMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (237)
7 directly used by Observium
.1.3.6.1.2.1.10.94
.1.3.6.1.2.1.10.94.1
.1.3.6.1.2.1.10.94.1.1
.1.3.6.1.2.1.10.94.1.1.1
adslLineEntry OBS ✓
.1.3.6.1.2.1.10.94.1.1.1.1
.1.3.6.1.2.1.10.94.1.1.1.1.1
Enumeration
.1.3.6.1.2.1.10.94.1.1.1.1.2
.1.3.6.1.2.1.10.94.1.1.1.1.3
OctetString
.1.3.6.1.2.1.10.94.1.1.1.1.4
OctetString
.1.3.6.1.2.1.10.94.1.1.1.1.5
.1.3.6.1.2.1.10.94.1.1.10
.1.3.6.1.2.1.10.94.1.1.10.1
.1.3.6.1.2.1.10.94.1.1.10.1.1
.1.3.6.1.2.1.10.94.1.1.10.1.10
.1.3.6.1.2.1.10.94.1.1.10.1.11
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.10.1.12
.1.3.6.1.2.1.10.94.1.1.10.1.13
.1.3.6.1.2.1.10.94.1.1.10.1.14
.1.3.6.1.2.1.10.94.1.1.10.1.15
.1.3.6.1.2.1.10.94.1.1.10.1.16
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.10.1.17
.1.3.6.1.2.1.10.94.1.1.10.1.18
.1.3.6.1.2.1.10.94.1.1.10.1.19
.1.3.6.1.2.1.10.94.1.1.10.1.2
.1.3.6.1.2.1.10.94.1.1.10.1.20
.1.3.6.1.2.1.10.94.1.1.10.1.21
.1.3.6.1.2.1.10.94.1.1.10.1.3
.1.3.6.1.2.1.10.94.1.1.10.1.4
Integer32
.1.3.6.1.2.1.10.94.1.1.10.1.5
Integer32
.1.3.6.1.2.1.10.94.1.1.10.1.6
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.10.1.7
.1.3.6.1.2.1.10.94.1.1.10.1.8
.1.3.6.1.2.1.10.94.1.1.10.1.9
.1.3.6.1.2.1.10.94.1.1.11
.1.3.6.1.2.1.10.94.1.1.11.1
.1.3.6.1.2.1.10.94.1.1.11.1.1
.1.3.6.1.2.1.10.94.1.1.11.1.10
.1.3.6.1.2.1.10.94.1.1.11.1.11
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.11.1.12
.1.3.6.1.2.1.10.94.1.1.11.1.13
.1.3.6.1.2.1.10.94.1.1.11.1.14
.1.3.6.1.2.1.10.94.1.1.11.1.15
.1.3.6.1.2.1.10.94.1.1.11.1.16
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.11.1.17
.1.3.6.1.2.1.10.94.1.1.11.1.18
.1.3.6.1.2.1.10.94.1.1.11.1.19
.1.3.6.1.2.1.10.94.1.1.11.1.2
.1.3.6.1.2.1.10.94.1.1.11.1.20
.1.3.6.1.2.1.10.94.1.1.11.1.21
.1.3.6.1.2.1.10.94.1.1.11.1.3
.1.3.6.1.2.1.10.94.1.1.11.1.4
Integer32
.1.3.6.1.2.1.10.94.1.1.11.1.5
Integer32
.1.3.6.1.2.1.10.94.1.1.11.1.6
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.11.1.7
.1.3.6.1.2.1.10.94.1.1.11.1.8
.1.3.6.1.2.1.10.94.1.1.11.1.9
.1.3.6.1.2.1.10.94.1.1.12
.1.3.6.1.2.1.10.94.1.1.12.1
Integer32
.1.3.6.1.2.1.10.94.1.1.12.1.1
.1.3.6.1.2.1.10.94.1.1.12.1.2
.1.3.6.1.2.1.10.94.1.1.12.1.3
.1.3.6.1.2.1.10.94.1.1.12.1.4
.1.3.6.1.2.1.10.94.1.1.12.1.5
.1.3.6.1.2.1.10.94.1.1.12.1.6
.1.3.6.1.2.1.10.94.1.1.13
.1.3.6.1.2.1.10.94.1.1.13.1
Integer32
.1.3.6.1.2.1.10.94.1.1.13.1.1
.1.3.6.1.2.1.10.94.1.1.13.1.2
.1.3.6.1.2.1.10.94.1.1.13.1.3
.1.3.6.1.2.1.10.94.1.1.13.1.4
.1.3.6.1.2.1.10.94.1.1.13.1.5
.1.3.6.1.2.1.10.94.1.1.13.1.6
.1.3.6.1.2.1.10.94.1.1.14
.1.3.6.1.2.1.10.94.1.1.14.1
OctetString
.1.3.6.1.2.1.10.94.1.1.14.1.1
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.10
.1.3.6.1.2.1.10.94.1.1.14.1.11
.1.3.6.1.2.1.10.94.1.1.14.1.12
.1.3.6.1.2.1.10.94.1.1.14.1.13
.1.3.6.1.2.1.10.94.1.1.14.1.14
milli-secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.15
Enumeration
.1.3.6.1.2.1.10.94.1.1.14.1.16
%Integer32
.1.3.6.1.2.1.10.94.1.1.14.1.17
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.18
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.19
Enumeration
.1.3.6.1.2.1.10.94.1.1.14.1.2
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.20
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.21
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.22
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.23
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.24
.1.3.6.1.2.1.10.94.1.1.14.1.25
.1.3.6.1.2.1.10.94.1.1.14.1.26
.1.3.6.1.2.1.10.94.1.1.14.1.27
.1.3.6.1.2.1.10.94.1.1.14.1.28
milli-secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.29
%Integer32
.1.3.6.1.2.1.10.94.1.1.14.1.3
.1.3.6.1.2.1.10.94.1.1.14.1.30
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.4
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.5
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.6
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.7
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.8
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.14.1.9
.1.3.6.1.2.1.10.94.1.1.15
.1.3.6.1.2.1.10.94.1.1.15.1
OctetString
.1.3.6.1.2.1.10.94.1.1.15.1.1
.1.3.6.1.2.1.10.94.1.1.15.1.10
Enumeration
.1.3.6.1.2.1.10.94.1.1.15.1.11
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.12
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.13
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.14
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.15
.1.3.6.1.2.1.10.94.1.1.15.1.16
.1.3.6.1.2.1.10.94.1.1.15.1.17
.1.3.6.1.2.1.10.94.1.1.15.1.18
.1.3.6.1.2.1.10.94.1.1.15.1.19
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.2
.1.3.6.1.2.1.10.94.1.1.15.1.20
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.3
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.4
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.5
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.15.1.6
.1.3.6.1.2.1.10.94.1.1.15.1.7
.1.3.6.1.2.1.10.94.1.1.15.1.8
.1.3.6.1.2.1.10.94.1.1.15.1.9
.1.3.6.1.2.1.10.94.1.1.16
.1.3.6.1.2.1.10.94.1.1.2
.1.3.6.1.2.1.10.94.1.1.2.1
OctetString
.1.3.6.1.2.1.10.94.1.1.2.1.1
OctetString
.1.3.6.1.2.1.10.94.1.1.2.1.2
OctetString
.1.3.6.1.2.1.10.94.1.1.2.1.3
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.2.1.4
tenth dBUnsigned32
.1.3.6.1.2.1.10.94.1.1.2.1.5
Bits
.1.3.6.1.2.1.10.94.1.1.2.1.6
tenth dBmInteger32
.1.3.6.1.2.1.10.94.1.1.2.1.7
.1.3.6.1.2.1.10.94.1.1.2.1.8
.1.3.6.1.2.1.10.94.1.1.3
.1.3.6.1.2.1.10.94.1.1.3.1
OctetString
.1.3.6.1.2.1.10.94.1.1.3.1.1
OctetString
.1.3.6.1.2.1.10.94.1.1.3.1.2
OctetString
.1.3.6.1.2.1.10.94.1.1.3.1.3
tenth dBInteger32
.1.3.6.1.2.1.10.94.1.1.3.1.4
tenth dBUnsigned32
.1.3.6.1.2.1.10.94.1.1.3.1.5
Bits
.1.3.6.1.2.1.10.94.1.1.3.1.6
tenth dBmInteger32
.1.3.6.1.2.1.10.94.1.1.3.1.7
.1.3.6.1.2.1.10.94.1.1.3.1.8
.1.3.6.1.2.1.10.94.1.1.4
.1.3.6.1.2.1.10.94.1.1.4.1
milli-secondsSNMPv2-SMIGauge32
.1.3.6.1.2.1.10.94.1.1.4.1.1
.1.3.6.1.2.1.10.94.1.1.4.1.2
.1.3.6.1.2.1.10.94.1.1.4.1.3
.1.3.6.1.2.1.10.94.1.1.4.1.4
.1.3.6.1.2.1.10.94.1.1.5
.1.3.6.1.2.1.10.94.1.1.5.1
milli-secondsSNMPv2-SMIGauge32
.1.3.6.1.2.1.10.94.1.1.5.1.1
.1.3.6.1.2.1.10.94.1.1.5.1.2
.1.3.6.1.2.1.10.94.1.1.5.1.3
.1.3.6.1.2.1.10.94.1.1.5.1.4
.1.3.6.1.2.1.10.94.1.1.6
.1.3.6.1.2.1.10.94.1.1.6.1
.1.3.6.1.2.1.10.94.1.1.6.1.1
.1.3.6.1.2.1.10.94.1.1.6.1.10
.1.3.6.1.2.1.10.94.1.1.6.1.11
.1.3.6.1.2.1.10.94.1.1.6.1.12
.1.3.6.1.2.1.10.94.1.1.6.1.13
.1.3.6.1.2.1.10.94.1.1.6.1.14
.1.3.6.1.2.1.10.94.1.1.6.1.15
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.6.1.16
.1.3.6.1.2.1.10.94.1.1.6.1.17
.1.3.6.1.2.1.10.94.1.1.6.1.18
.1.3.6.1.2.1.10.94.1.1.6.1.19
.1.3.6.1.2.1.10.94.1.1.6.1.2
.1.3.6.1.2.1.10.94.1.1.6.1.20
.1.3.6.1.2.1.10.94.1.1.6.1.21
.1.3.6.1.2.1.10.94.1.1.6.1.22
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.6.1.23
.1.3.6.1.2.1.10.94.1.1.6.1.24
.1.3.6.1.2.1.10.94.1.1.6.1.25
.1.3.6.1.2.1.10.94.1.1.6.1.26
.1.3.6.1.2.1.10.94.1.1.6.1.27
.1.3.6.1.2.1.10.94.1.1.6.1.28
.1.3.6.1.2.1.10.94.1.1.6.1.29
.1.3.6.1.2.1.10.94.1.1.6.1.3
.1.3.6.1.2.1.10.94.1.1.6.1.4
.1.3.6.1.2.1.10.94.1.1.6.1.5
.1.3.6.1.2.1.10.94.1.1.6.1.6
Integer32
.1.3.6.1.2.1.10.94.1.1.6.1.7
Integer32
.1.3.6.1.2.1.10.94.1.1.6.1.8
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.6.1.9
.1.3.6.1.2.1.10.94.1.1.7
.1.3.6.1.2.1.10.94.1.1.7.1
.1.3.6.1.2.1.10.94.1.1.7.1.1
.1.3.6.1.2.1.10.94.1.1.7.1.10
.1.3.6.1.2.1.10.94.1.1.7.1.11
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.7.1.12
.1.3.6.1.2.1.10.94.1.1.7.1.13
.1.3.6.1.2.1.10.94.1.1.7.1.14
.1.3.6.1.2.1.10.94.1.1.7.1.15
.1.3.6.1.2.1.10.94.1.1.7.1.16
secondsInteger32
.1.3.6.1.2.1.10.94.1.1.7.1.17
.1.3.6.1.2.1.10.94.1.1.7.1.18
.1.3.6.1.2.1.10.94.1.1.7.1.19
.1.3.6.1.2.1.10.94.1.1.7.1.2
.1.3.6.1.2.1.10.94.1.1.7.1.20
.1.3.6.1.2.1.10.94.1.1.7.1.21
.1.3.6.1.2.1.10.94.1.1.7.1.3
.1.3.6.1.2.1.10.94.1.1.7.1.4
Integer32
.1.3.6.1.2.1.10.94.1.1.7.1.5
Integer32
.1.3.6.1.2.1.10.94.1.1.7.1.6
secondsUnsigned32
.1.3.6.1.2.1.10.94.1.1.7.1.7
.1.3.6.1.2.1.10.94.1.1.7.1.8
.1.3.6.1.2.1.10.94.1.1.7.1.9
.1.3.6.1.2.1.10.94.1.1.8
.1.3.6.1.2.1.10.94.1.1.8.1
Integer32
.1.3.6.1.2.1.10.94.1.1.8.1.1
.1.3.6.1.2.1.10.94.1.1.8.1.2
.1.3.6.1.2.1.10.94.1.1.8.1.3
.1.3.6.1.2.1.10.94.1.1.8.1.4
.1.3.6.1.2.1.10.94.1.1.8.1.5
.1.3.6.1.2.1.10.94.1.1.8.1.6
.1.3.6.1.2.1.10.94.1.1.8.1.7
.1.3.6.1.2.1.10.94.1.1.8.1.8
.1.3.6.1.2.1.10.94.1.1.9
.1.3.6.1.2.1.10.94.1.1.9.1
Integer32
.1.3.6.1.2.1.10.94.1.1.9.1.1
.1.3.6.1.2.1.10.94.1.1.9.1.2
.1.3.6.1.2.1.10.94.1.1.9.1.3
.1.3.6.1.2.1.10.94.1.1.9.1.4
.1.3.6.1.2.1.10.94.1.1.9.1.5
.1.3.6.1.2.1.10.94.1.1.9.1.6
.1.3.6.1.2.1.10.94.1.2
.1.3.6.1.2.1.10.94.1.2.1
.1.3.6.1.2.1.10.94.1.2.2
.1.3.6.1.2.1.10.94.1.3
.1.3.6.1.2.1.10.94.1.3.1
.1.3.6.1.2.1.10.94.1.3.2
Dependencies (9) 7 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (25)
A collection of objects providing configuration
information about an ADSL Line.
.1.3.6.1.2.1.10.94.1.3.1.1
A collection of objects providing physical
configuration information of the ADSL Line.
.1.3.6.1.2.1.10.94.1.3.1.2
A collection of objects providing configuration
information about an ADSL channel.
.1.3.6.1.2.1.10.94.1.3.1.3
A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end).
.1.3.6.1.2.1.10.94.1.3.1.4
A collection of objects providing current 15-minute,
1-day; and previous 1-day performance counts on
ADSL Line (ATU-C end) .
.1.3.6.1.2.1.10.94.1.3.1.5
A collection of objects providing raw performance
counts on an ADSL Line (ATU-R end).
.1.3.6.1.2.1.10.94.1.3.1.6
A collection of objects providing current 15-minute,
1-day; and previous 1-day performance counts on
ADSL Line (ATU-R end).
.1.3.6.1.2.1.10.94.1.3.1.7
A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end).
.1.3.6.1.2.1.10.94.1.3.1.8
A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end).
.1.3.6.1.2.1.10.94.1.3.1.9
A collection of objects providing provisioning
information about an ADSL Line.
.1.3.6.1.2.1.10.94.1.3.1.10
A collection of objects providing alarm provisioning
information about an ADSL Line.
.1.3.6.1.2.1.10.94.1.3.1.11
A collection of objects providing profile
control for the ADSL system.
.1.3.6.1.2.1.10.94.1.3.1.12
The collection of adsl notifications.
.1.3.6.1.2.1.10.94.1.3.1.13
A collection of objects providing configuration
information about an ADSL Line on the ATU-R side.
.1.3.6.1.2.1.10.94.1.3.1.14
A collection of objects providing physical
configuration information of the ADSL Line on the
ATU-R side.
.1.3.6.1.2.1.10.94.1.3.1.15
A collection of objects providing configuration
information about an ADSL channel on the ATU-R
side.
.1.3.6.1.2.1.10.94.1.3.1.16
A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end) provided by the
ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.17
A collection of objects providing current

15-minute, 1-day; and previous 1-day performance
counts on ADSL Line (ATU-C end) provided by the
ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.18
A collection of objects providing raw performance
counts on an ADSL Line (ATU-R end) provided by the
ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.19
A collection of objects providing current
15-minute, 1-day; and previous 1-day performance
counts on ADSL Line (ATU-R end) provided by the
ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.20
A collection of objects providing channel block
performance information on an ADSL channel
(ATU-C end) provided by the ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.21
A collection of objects providing channel block
performance information on an ADSL channel
(ATU-R end) provided by the ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.22
A collection of objects providing alarm
provisioning
information about an ADSL Line provided by the
ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.23
A collection of objects providing profile
control for the ADSL system by the ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.24
The collection of ADSL notifications implemented by
the ATU-R agent.
.1.3.6.1.2.1.10.94.1.3.1.25
Compliance Statements (2)

OID .1.3.6.1.2.1.10.94.1.3.2.1
The compliance statement for SNMP entities
which manage ADSL ATU-C interfaces.
Required groups
mandatory adslLineGroup
mandatory adslPhysicalGroup
mandatory adslChannelGroup
mandatory adslAtucPhysPerfIntervalGroup
mandatory adslAturPhysPerfIntervalGroup
mandatory adslLineConfProfileGroup
mandatory adslLineAlarmConfProfileGroup
mandatory adslLineConfProfileControlGroup
optional adslAtucPhysPerfRawCounterGroup This group is optional. Implementations which
require continuous ATU-C physical event counters
should implement this group.
optional adslAturPhysPerfRawCounterGroup This group is optional. Implementations which
require continuous ATU-R physical event counters
should implement this group.
optional adslAtucChanPerformanceGroup This group is optional. Implementations which
require ATU-C channel block event counters should
implement this group.
optional adslAturChanPerformanceGroup This group is optional. Implementations which
require ATU-R channel block event counters should
implement this group.
Object refinements
ObjectAccessSyntaxDescription
adslLineConfProfile readonly
Read-only access is applicable when static
profiles are implemented.
adslAtucConfRateMode readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfRateChanRatio readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfTargetSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfMaxSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfMinSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfDownshiftSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfUpshiftSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfMinUpshiftTime readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucConfMinDownshiftTime readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucChanConfFastMinTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucChanConfInterleaveMinTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucChanConfFastMaxTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucChanConfInterleaveMaxTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucChanConfMaxInterleaveDelay readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfRateMode readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfRateChanRatio readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfTargetSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfMaxSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfMinSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfDownshiftSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfUpshiftSnrMgn readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfMinUpshiftTime readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturConfMinDownshiftTime readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturChanConfFastMinTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturChanConfInterleaveMinTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturChanConfFastMaxTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturChanConfInterleaveMaxTxRate readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturChanConfMaxInterleaveDelay readwrite
Read-write access is applicable when
static profiles are implemented.
adslLineConfProfileRowStatus readonly
Read-only access is applicable only when static
profiles are implemented.
adslLineAlarmConfProfile readonly
Read-only access is applicable only when static
profiles are implemented.
adslAtucThresh15MinLofs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinLoss readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinLols readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinLprs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinESs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshFastRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshInterleaveRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshFastRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshInterleaveRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucInitFailureTrapEnable readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLofs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLoss readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLprs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinESs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshFastRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshInterleaveRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshFastRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshInterleaveRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslLineAlarmConfProfileRowStatus readonly
Read-only access is applicable only when static
profiles are implemented.

OID .1.3.6.1.2.1.10.94.1.3.2.2
The compliance statement for SNMP entities
which manage ADSL ATU-R interfaces.
Required groups
mandatory adslAturLineGroup
mandatory adslAturPhysicalGroup
mandatory adslAturChannelGroup
mandatory adslAturAtucPhysPerfIntervalGroup
mandatory adslAturAturPhysPerfIntervalGroup
mandatory adslAturLineAlarmConfProfileGroup
mandatory adslAturLineConfProfileControlGroup
optional adslAturAtucPhysPerfRawCounterGroup This group is optional. Implementations which
require continuous ATU-C physical event counters
should implement this group.
optional adslAturAturPhysPerfRawCounterGroup This group is optional. Implementations which

require continuous ATU-R physical event counters
should implement this group.
optional adslAturAtucChanPerformanceGroup This group is optional. Implementations which
require ATU-C channel block event counters should
implement this group.
optional adslAturAturChanPerformanceGroup This group is optional. Implementations which
require ATU-R channel block event counters should
implement this group.
Object refinements
ObjectAccessSyntaxDescription
adslLineAlarmConfProfile readonly
Read-only access is applicable only when static
profiles are implemented.
adslAtucThresh15MinLofs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinLoss readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThresh15MinESs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshFastRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshInterleaveRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucThreshFastRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslAtucInitFailureTrapEnable readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLofs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLoss readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinLprs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThresh15MinESs readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshFastRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshInterleaveRateUp readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshFastRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslAturThreshInterleaveRateDown readwrite
Read-write access is applicable when
static profiles are implemented.
adslLineAlarmConfProfileRowStatus readonly
Read-only access is applicable only when static
profiles are implemented.
adslAtucCurrStatus
Bits
noDefect(0), lossOfFraming(1), lossOfSignal(2)
It is allowable to implement only noDefect(0),
lossOfFraming(1) and lossOfSignal(2) by the ATU-R
agent.
Notifications / Traps (12)
NameOIDDescription
.1.3.6.1.2.1.10.94.1.2.1.0.1
Loss of Framing 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.1.0.2
Loss of Signal 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.1.0.3
Loss of Power 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.1.0.4
Errored Second 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.1.0.5
The ATUCs transmit rate has changed (RADSL mode only)
.1.3.6.1.2.1.10.94.1.2.1.0.6
Loss of Link 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.1.0.7
ATUC initialization failed. See adslAtucCurrStatus
for potential reasons.
.1.3.6.1.2.1.10.94.1.2.2.0.1
Loss of Framing 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.2.0.2
Loss of Signal 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.2.0.3
Loss of Power 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.2.0.4
Errored Second 15-minute interval threshold reached.
.1.3.6.1.2.1.10.94.1.2.2.0.5
The ATURs transmit rate has changed (RADSL mode only)