CISCO-POWER-ETHERNET-EXT-MIB Table View

This table extends the POWER-ETHERNET-MIB pethPsePortTable
for power Ethernet ports on a Powered Sourcing Equipment
(PSE) device.

cpeExtPsePortEntry row .1.3.6.1.4.1.9.9.402.1.2.1

A cpeExtPsePortEntry extends a corresponding
pethPsePortTable entry. This entry displays and
controls more characteristics of a power Ethernet
port on a PSE device.

Indexes

No indexes recorded

Column	Syntax	OID
cpeExtPsePortEnable This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The states, 'auto', 'static' and 'limit' correspond to a value of 't…	Enumerationr/w Enumerated Values: 1 auto 2 static 3 limit 4 disable	.1.3.6.1.4.1.9.9.402.1.2.1.1
cpeExtPsePortDiscoverMode This object indicates the discover mode used by the system to discover the PD. A value of 'unknown' indicates that the discover mode on the interface is unknown. A value of 'off' indicates …	Enumeration Enumerated Values: 1 unknown 2 off 3 ieee 4 cisco 5 ieeeAndCisco	.1.3.6.1.4.1.9.9.402.1.2.1.2
cpeExtPsePortDeviceDetected This object indicates if a Powered Device (PD) has been detected on the interface. A value of 'true' indicates that a PD has been detected on the interface. A value of 'false' indicates tha…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.402.1.2.1.3
cpeExtPsePortIeeePd This object indicates whether the Powered Device attached to the interface is an IEEE compliant Powered Device or not. A value of 'true' indicates the attached Powered Device is an IEEE compliant Powered …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.402.1.2.1.4
cpeExtPsePortAdditionalStatus This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information. deny: When set, the PD attached to the interface is being denied power d…	Bits Enumerated Values: 0 deny 1 overdraw 2 overdrawLog	.1.3.6.1.4.1.9.9.402.1.2.1.5
cpeExtPsePortPwrMax This indicates the maximum amount of power that the PSE will make available to the PD connected to this interface.	milliwattsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.6
cpeExtPsePortPwrAllocated This object indicates the amount of power allocated from the PSE for the PD.	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.7
cpeExtPsePortPwrAvailable This object indicates the amount of power available for the PD to use. This value may differ from the value cpeExtPsePortPwrAllocated due to the efficiency issues of delivering the power from the PSE to the PD. …	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.8
cpeExtPsePortPwrConsumption This indicates the actual power consumption of the PD connected to this interface. It may not necessarily be equal to the value of cpeExtPsePortPwrAvailable.	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.9
cpeExtPsePortMaxPwrDrawn This indicates the maximum amount of power drawn by the PD connected to this interface, since it was powered on.	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.10
cpeExtPsePortEntPhyIndex The entPhysicalIndex value that uniquely identifies the PSE port. If the PSE port does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, …	CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.402.1.2.1.11
cpeExtPsePortPolicingCapable This object indicates whether the PSE port hardware is capable of policing the port for proper power consumption based on the allocated value.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.402.1.2.1.12
cpeExtPsePortPolicingEnable This object allows the user to turn on or turn off the power policing of the PSE port. If the instance value of cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed to set this object to 'on' or 'off'. Otherwise…	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.9.9.402.1.2.1.13
cpeExtPsePortPolicingAction This object specifies the power policing action that the device will take on this PSE port when the real-time power consumption exceeds its max power allocation if the value of cpeExtPsePortPolicingEnable is 'on'. …	Enumerationr/w Enumerated Values: 1 deny 2 logOnly	.1.3.6.1.4.1.9.9.402.1.2.1.14
cpeExtPsePortPwrManAlloc This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP or IEEE. Setting this object value to zero …	milliwattsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.2.1.15
cpeExtPsePortCapabilities This object indicates the PSE functionality that this port supports. If the 'policing' BIT is set, then this PSE port is capable of policing the port for proper power consumption based on the allocated va…	Bits Enumerated Values: 0 policing 1 poePlus	.1.3.6.1.4.1.9.9.402.1.2.1.16

This table contains the additional information for the
main PSE group in pethMainPseTable.

cpeExtMainPseEntry row .1.3.6.1.4.1.9.9.402.1.3.1

A cpeExtMainPseEntry contains information about
a particular pethMainPseGroupIndex. An entry is
created by the agent when a main PSE group is added
to the pethMainPseTable. An entry is deleted by the
agent when a main P…

Indexes

POWER-ETHERNET-MIBpethMainPseGroupIndex

Column	Syntax	OID
cpeExtMainPseEntPhyIndex The entPhysicalIndex value that uniquely identifies the main PSE group. If the main PSE group does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the managemen…	CISCO-TCEntPhysicalIndexOrZero Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.402.1.3.1.1
cpeExtMainPseDescr A textual string containing information about the Power Source Equipment (PSE) group.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.402.1.3.1.2
cpeExtMainPsePwrMonitorCapable This object indicates if the given group is capable of monitoring the power consumption of the interfaces that belong to the group. The value 'true' means that the group is capable. The value 'false' means that the grou…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.402.1.3.1.3
cpeExtMainPseUsedPower This object indicates used power expressed in miliwatts.	miliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.3.1.4
cpeExtMainPseRemainingPower This object indicates remaining power expressed in miliwatts, this parameter is calculated as pethMainPsePower minus cpeExtMainPseUsedPower.	miliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.3.1.5

This table contains the statistics information
of the powered devices fallen into different power
classifications in the system.

cpeExtPdStatsEntry row .1.3.6.1.4.1.9.9.402.1.4.2.1

A cpeExtPdStatsEntry contains the statistics
information about a particular power classification
defined in cpeExtPdStatsIndex.

Indexes

cpeExtPdStatsClass

Column	Syntax	OID
cpeExtPdStatsClass The power classification as the index for the statistics information for powered devices. A value of 'cisco' indicates that the powered devices are CISCO proprietary and their power classification does n…	Enumeration Enumerated Values: 1 cisco 2 class0 3 class1 4 class2 5 class3 6 class4	.1.3.6.1.4.1.9.9.402.1.4.2.1.1
cpeExtPdStatsDeviceCount This object indicates the count of the powered devices whose power classification falls into a specific value of cpeExtPdStatsIndex.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.4.2.1.2

A table provides the Link Layer Discovery Protocol (LLDP)
based Data Link Layer (DLL) power classification
characteristics of PSE ports and PDs attached to them.

cpeExtPsePortLldpEntry row .1.3.6.1.4.1.9.9.402.1.7.1

A cpeExtPsePortLldpEntry entry contains the LLDP
based 802.3at DLL power classification characteristics for
a particular PSE and the PD attached to it.

A PSE has its entry here when all of the following co…

Indexes

POWER-ETHERNET-MIBpethPsePortGroupIndex POWER-ETHERNET-MIBpethPsePortIndex

Column	Syntax	OID
cpeExtPsePortLldpPwrType The DTE Power via MDI type of the local system (PSE).	CpeExtLldpPwrType Type Values: 1 type1Pd 2 type1Pse 3 type2Pd 4 type2Pse	.1.3.6.1.4.1.9.9.402.1.7.1.1
cpeExtPsePortLldpPdPwrType The DTE Power via MDI type of the remote system (PD).	CpeExtLldpPwrType Type Values: 1 type1Pd 2 type1Pse 3 type2Pd 4 type2Pse	.1.3.6.1.4.1.9.9.402.1.7.1.2
cpeExtPsePortLldpPwrSrc The power source of the local system (PSE).	CpeExtLldpPwrSrc Type Values: 1 pseAndLocal 2 local 3 pse 4 backupSrc 5 primarySrc 6 unknown	.1.3.6.1.4.1.9.9.402.1.7.1.3
cpeExtPsePortLldpPdPwrSrc The power source of the remote system (PD).	CpeExtLldpPwrSrc Type Values: 1 pseAndLocal 2 local 3 pse 4 backupSrc 5 primarySrc 6 unknown	.1.3.6.1.4.1.9.9.402.1.7.1.4
cpeExtPsePortLldpPwrPriority The power priority of the local system (PSE).	CpeExtPwrPriority Type Values: 1 critical 2 high 3 low 4 unknown	.1.3.6.1.4.1.9.9.402.1.7.1.5
cpeExtPsePortLldpPdPwrPriority The power priority of the remote system (PD).	CpeExtPwrPriority Type Values: 1 critical 2 high 3 low 4 unknown	.1.3.6.1.4.1.9.9.402.1.7.1.6
cpeExtPsePortLldpPwrReq The requested PD power value that the local system (PSE) mirrors back to the remote system (PD).	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.7.1.7
cpeExtPsePortLldpPdPwrReq The PD requested power value received from the remote system (PD).	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.7.1.8
cpeExtPsePortLldpPwrAlloc The PSE allocated power value for the remote system (PD).	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.7.1.9
cpeExtPsePortLldpPdPwrAlloc The PSE allocated power value received from the remote system (PD).	milliwattsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.402.1.7.1.10
cpeExtPsePortLldpPwrClass The PSE power classification sent to the remote PD via MDI TLV in LLDP Protocol.	CpeExtLldpPwrClassOrZero Type Values: 0 unknown 1 class0 2 class1 3 class2 4 class3 5 class4	.1.3.6.1.4.1.9.9.402.1.7.1.11
cpeExtPsePortLldpPdPwrClass This power classification received from the remote system (PD).	CpeExtLldpPwrClassOrZero Type Values: 0 unknown 1 class0 2 class1 3 class2 4 class3 5 class4	.1.3.6.1.4.1.9.9.402.1.7.1.12
cpeExtPsePortLldpPdPwrSupport This object indicates the power support mode received from the remote PD via MDI TLV in LLDP protocol. 'portClass' - This bit is set if the port is operating as PSE. Other…	Bits Enumerated Values: 0 portClass 1 pseMdiPwrSupport 2 pseMdiPwrState 3 psePairCtrlAbility	.1.3.6.1.4.1.9.9.402.1.7.1.13
cpeExtPsePortLldpPdPwrPairsOrZero This object indicates the pinout pairs in use received from the remote PD via MDI TLV in LLDP Protocol. 'unknown' - information is not available 'signal' - the signal pairs are in use. …	Enumeration Enumerated Values: 0 unknown 1 signal 2 spare	.1.3.6.1.4.1.9.9.402.1.7.1.14