Standard view Table view

CISCO-POWER-ETHERNET-EXT-MIB

Monitored by Observium 
        A MIB module for extending the POWER-ETHERNET-MIB
(RFC3621) to add objects which provide additional
management information about Power Sourcing Equipment
(PSE) not available in POWER-ETHERNET-MIB.
        
Glossary
        
Power Sourcing Equipment (PSE)
    These are devices supplying electrical power to
    other equipment. They are, for example, inline power
    switches, inline power daughterboards and power patch
    panels.
        
Powered Device (PD)
    These are devices receiving their electrical power
    supply from Power Sourcing Equipment. They are, for
    example, IP telephones and wireless access points
    or bridges.
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Sensors
Explore Observium network monitoring
Source file
CISCO-POWER-ETHERNET-EXT-MIB
Last revised
Identity
ciscoPowerEthernetExtMIB
Base OID
1.3.6.1.4.1.9.9.402
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC EntPhysicalIndexOrZero
POWER-ETHERNET-MIB pethMainPseGroupIndex pethPsePortEntry pethPsePortGroupIndex pethPsePortIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-POWER-ETHERNET-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-POWER-ETHERNET-EXT-MIB::ciscoPowerEthernetExtMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-POWER-ETHERNET-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-POWER-ETHERNET-EXT-MIB::ciscoPowerEthernetExtMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (56)
7 directly used by Observium
ciscoPowerEthernetExtMIB
.1.3.6.1.4.1.9.9.402
cpeExtMIBNotifs
.1.3.6.1.4.1.9.9.402.0
cpeExtMIBObjects
.1.3.6.1.4.1.9.9.402.1
cpeExtDefaultAllocation r/w
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.1
cpeExtPsePortTable
.1.3.6.1.4.1.9.9.402.1.2
cpeExtPsePortEntry OBS ✓
.1.3.6.1.4.1.9.9.402.1.2.1
cpeExtPsePortEnable OBS ✓ r/w
Enumeration
 .1.3.6.1.4.1.9.9.402.1.2.1.1
cpeExtPsePortMaxPwrDrawn OBS ✓
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.10
cpeExtPsePortEntPhyIndex OBS ✓
CISCO-TCEntPhysicalIndexOrZero
 .1.3.6.1.4.1.9.9.402.1.2.1.11
cpeExtPsePortPolicingCapable
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.2.1.12
cpeExtPsePortPolicingEnable r/w
Enumeration
 .1.3.6.1.4.1.9.9.402.1.2.1.13
cpeExtPsePortPolicingAction r/w
Enumeration
 .1.3.6.1.4.1.9.9.402.1.2.1.14
cpeExtPsePortPwrManAlloc r/w
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.15
cpeExtPsePortCapabilities
Bits
 .1.3.6.1.4.1.9.9.402.1.2.1.16
cpeExtPsePortDiscoverMode
Enumeration
 .1.3.6.1.4.1.9.9.402.1.2.1.2
cpeExtPsePortDeviceDetected
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.2.1.3
cpeExtPsePortIeeePd
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.2.1.4
cpeExtPsePortAdditionalStatus
Bits
 .1.3.6.1.4.1.9.9.402.1.2.1.5
cpeExtPsePortPwrMax r/w
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.6
cpeExtPsePortPwrAllocated OBS ✓
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.7
cpeExtPsePortPwrAvailable OBS ✓
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.8
cpeExtPsePortPwrConsumption OBS ✓
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.2.1.9
cpeExtMainPseTable
.1.3.6.1.4.1.9.9.402.1.3
cpeExtMainPseEntry
POWER-ETHERNET-MIBpethMainPseGroupIndex
 .1.3.6.1.4.1.9.9.402.1.3.1
cpeExtMainPseEntPhyIndex
CISCO-TCEntPhysicalIndexOrZero
 .1.3.6.1.4.1.9.9.402.1.3.1.1
cpeExtMainPseDescr
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.4.1.9.9.402.1.3.1.2
cpeExtMainPsePwrMonitorCapable
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.3.1.3
cpeExtMainPseUsedPower
miliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.3.1.4
cpeExtMainPseRemainingPower
miliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.3.1.5
cpeExtPdStatistics
.1.3.6.1.4.1.9.9.402.1.4
cpeExtPdStatsTotalDevices
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.4.1
cpeExtPdStatsTable
.1.3.6.1.4.1.9.9.402.1.4.2
cpeExtPdStatsEntry
cpeExtPdStatsClass
 .1.3.6.1.4.1.9.9.402.1.4.2.1
cpeExtPdStatsClass
Enumeration
 .1.3.6.1.4.1.9.9.402.1.4.2.1.1
cpeExtPdStatsDeviceCount
SNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.4.2.1.2
cpeExtPolicingNotifEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.5
cpeExtPowerPriorityEnable r/w
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.402.1.6
cpeExtPsePortLldpTable
.1.3.6.1.4.1.9.9.402.1.7
cpeExtPsePortLldpEntry
POWER-ETHERNET-MIBpethPsePortGroupIndexPOWER-ETHERNET-MIBpethPsePortIndex
 .1.3.6.1.4.1.9.9.402.1.7.1
cpeExtPsePortLldpPwrType
CpeExtLldpPwrType
 .1.3.6.1.4.1.9.9.402.1.7.1.1
cpeExtPsePortLldpPdPwrAlloc
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.7.1.10
cpeExtPsePortLldpPwrClass
CpeExtLldpPwrClassOrZero
 .1.3.6.1.4.1.9.9.402.1.7.1.11
cpeExtPsePortLldpPdPwrClass
CpeExtLldpPwrClassOrZero
 .1.3.6.1.4.1.9.9.402.1.7.1.12
cpeExtPsePortLldpPdPwrSupport
Bits
 .1.3.6.1.4.1.9.9.402.1.7.1.13
cpeExtPsePortLldpPdPwrPairsOrZero
Enumeration
 .1.3.6.1.4.1.9.9.402.1.7.1.14
cpeExtPsePortLldpPdPwrType
CpeExtLldpPwrType
 .1.3.6.1.4.1.9.9.402.1.7.1.2
cpeExtPsePortLldpPwrSrc
CpeExtLldpPwrSrc
 .1.3.6.1.4.1.9.9.402.1.7.1.3
cpeExtPsePortLldpPdPwrSrc
CpeExtLldpPwrSrc
 .1.3.6.1.4.1.9.9.402.1.7.1.4
cpeExtPsePortLldpPwrPriority
CpeExtPwrPriority
 .1.3.6.1.4.1.9.9.402.1.7.1.5
cpeExtPsePortLldpPdPwrPriority
CpeExtPwrPriority
 .1.3.6.1.4.1.9.9.402.1.7.1.6
cpeExtPsePortLldpPwrReq
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.7.1.7
cpeExtPsePortLldpPdPwrReq
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.7.1.8
cpeExtPsePortLldpPwrAlloc
milliwattsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.402.1.7.1.9
cpeExtMIBConformance
.1.3.6.1.4.1.9.9.402.2
cpeExtMIBCompliances
.1.3.6.1.4.1.9.9.402.2.1
cpeExtMIBGroups
.1.3.6.1.4.1.9.9.402.2.2
Dependencies (7) 7 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. CISCO-TCcisco
  5. SNMPv2-CONFrfc
  6. SNMP-FRAMEWORK-MIBrfc
  7. POWER-ETHERNET-MIBrfc
  8. CISCO-POWER-ETHERNET-EXT-MIBciscoselected
Type Definitions (4)
CpeExtLldpPwrClassOrZero
Enumeration
unknown(0)
class0(1)
class1(2)
class2(3)
class3(4)
class4(5)
CpeExtLldpPwrSrc
Enumeration
pseAndLocal(1)
local(2)
pse(3)
backupSrc(4)
primarySrc(5)
unknown(6)
CpeExtLldpPwrType
Enumeration
type1Pd(1)
type1Pse(2)
type2Pd(3)
type2Pse(4)
CpeExtPwrPriority
Enumeration
critical(1)
high(2)
low(3)
unknown(4)
Conformance Groups (18)
cpeExtPsePortGroup
cpeExtPsePortEnable cpeExtPsePortDiscoverMode cpeExtPsePortDeviceDetected cpeExtPsePortIeeePd cpeExtPsePortAdditionalStatus cpeExtPsePortPwrMax cpeExtPsePortPwrAllocated cpeExtPsePortPwrAvailable cpeExtPsePortPwrConsumption
This group provides information and configuration objects
in addition to those provided in the POWER-ETHERNET-MIB
(RFC3621).
 .1.3.6.1.4.1.9.9.402.2.2.1
cpeExtPsePortGlobalConfigGroup
cpeExtDefaultAllocation
This is a collection of objects which provide global
configuration of the PSE interfaces.
 .1.3.6.1.4.1.9.9.402.2.2.2
cpeExtPsePortPwrMonitorGroup
cpeExtPsePortMaxPwrDrawn
This is a collection of objects which provide power
monitoring on PD's connected to the PSE interfaces.
 .1.3.6.1.4.1.9.9.402.2.2.3
cpeExtMainPseGroup deprecated
cpeExtMainPseEntPhyIndex cpeExtMainPseDescr cpeExtMainPsePwrMonitorCapable
This is a collection of objects which provide
additional information for the PSE group.
cpeExtMainPseGroup object is superseded by cpeExtMainPseGroup2,
and cpeExtPseGrpPwrGroup.
 .1.3.6.1.4.1.9.9.402.2.2.4
cpeExtPortEntityIndexGroup
cpeExtPsePortEntPhyIndex
This is a collection of objects which provide
entity physical index information for PSE port.
 .1.3.6.1.4.1.9.9.402.2.2.5
cpeExtPortPolicingGroup
cpeExtPsePortPolicingCapable cpeExtPsePortPolicingEnable
This is a collection of objects which provide
the hardware power consumption policing information
for PSE port.
 .1.3.6.1.4.1.9.9.402.2.2.6
cpeExtPdStatsGroup
cpeExtPdStatsTotalDevices cpeExtPdStatsDeviceCount
This is a collection of objects which provide
the statistics information for powered devices.
 .1.3.6.1.4.1.9.9.402.2.2.7
cpeExtMainPseGroup2
cpeExtMainPseEntPhyIndex cpeExtMainPseDescr
This is a collection of objects which provide
additional information to identify the PSE group.
 .1.3.6.1.4.1.9.9.402.2.2.8
cpeExtPseGrpPwrGroup
cpeExtMainPsePwrMonitorCapable
This is a collection of objects which provide
power monitoring information for the PSE group.
 .1.3.6.1.4.1.9.9.402.2.2.9
cpeExtPortPolicingActionGroup
cpeExtPsePortPolicingAction
This is a collection of objects which provide control
of the power policing action of the PSE port.
 .1.3.6.1.4.1.9.9.402.2.2.10
cpeExtPortPwrManAllocGroup
cpeExtPsePortPwrManAlloc
This is a collection of objects which provide manual
power allocation for the PSE port.
 .1.3.6.1.4.1.9.9.402.2.2.11
cpeExtPolicingNotifEnableGroup
cpeExtPolicingNotifEnable
A collection of object that provides control over
power consumption policing status notification.
 .1.3.6.1.4.1.9.9.402.2.2.12
cpeExtPolicingNotifGroup
cpeExtPolicingNotif
This is a collection of notifications related to
power consumption policing information for PSE ports.
 .1.3.6.1.4.1.9.9.402.2.2.13
cpeExtPowerPriorityGroup
cpeExtPowerPriorityEnable
A collection of objects which provides global
control of power priority feature.
 .1.3.6.1.4.1.9.9.402.2.2.14
cpeExtPsePortLldpGroup
cpeExtPsePortLldpPwrType cpeExtPsePortLldpPdPwrType cpeExtPsePortLldpPwrSrc cpeExtPsePortLldpPdPwrSrc cpeExtPsePortLldpPwrPriority cpeExtPsePortLldpPdPwrPriority cpeExtPsePortLldpPwrReq cpeExtPsePortLldpPdPwrReq cpeExtPsePortLldpPwrAlloc cpeExtPsePortLldpPdPwrAlloc
A collection of objects which provides the
information about the LLDP based Data Link Layer
power classification characteristics of power Ethernet
PSE ports.
 .1.3.6.1.4.1.9.9.402.2.2.15
cpeExtPsePortCapabilitiesGroup
cpeExtPsePortCapabilities
A collection of objects which provides PSE
port capabilities.
 .1.3.6.1.4.1.9.9.402.2.2.16
cpeExtPsePortLldpPowerGroup
cpeExtPsePortLldpPwrClass cpeExtPsePortLldpPdPwrClass cpeExtPsePortLldpPdPwrSupport cpeExtPsePortLldpPdPwrPairsOrZero
A collection of objects which provide Power information
via MDI TLV in LLDP Protocol.
 .1.3.6.1.4.1.9.9.402.2.2.17
cpeExtPseInfoPwrGroup
cpeExtMainPseUsedPower cpeExtMainPseRemainingPower
This is a collection of objects which provide
used and remaining power information for the PSE group.
 .1.3.6.1.4.1.9.9.402.2.2.18
Compliance Statements (6)

OID .1.3.6.1.4.1.9.9.402.2.1.1
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.

OID .1.3.6.1.4.1.9.9.402.2.1.2
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.
optional cpeExtPsePortPwrMonitorGroup The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces.
optional cpeExtMainPseGroup The cpeExtMainPseGroup is mandatory for agents
that support the interface power consumption
monitoring, or need additional info to identify
the PSE group.

OID .1.3.6.1.4.1.9.9.402.2.1.3
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.
optional cpeExtPsePortPwrMonitorGroup The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces.
optional cpeExtMainPseGroup2 The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group.
optional cpeExtPseGrpPwrGroup The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups.
optional cpeExtPortEntityIndexGroup The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port.
optional cpeExtPortPolicingGroup The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports.
optional cpeExtPdStatsGroup The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices.
optional cpeExtPortPolicingActionGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action.
optional cpeExtPortPwrManAllocGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation.
optional cpeExtPolicingNotifEnableGroup The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPolicingNotifGroup The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.

OID .1.3.6.1.4.1.9.9.402.2.1.4
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.
optional cpeExtPsePortPwrMonitorGroup The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces.
optional cpeExtMainPseGroup2 The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group.
optional cpeExtPseGrpPwrGroup The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups.
optional cpeExtPortEntityIndexGroup The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port.
optional cpeExtPortPolicingGroup The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports.
optional cpeExtPdStatsGroup The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices.
optional cpeExtPortPolicingActionGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action.
optional cpeExtPortPwrManAllocGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation.
optional cpeExtPolicingNotifEnableGroup The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPolicingNotifGroup The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPowerPriorityGroup The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature.
optional cpeExtPsePortLldpGroup The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification.
optional cpeExtPsePortCapabilitiesGroup The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities.
Object refinements
ObjectAccessSyntaxDescription
cpeExtPsePortEnable readonly
Write access is not required.
cpeExtPsePortPwrMax readonly
Write access is not required.
cpeExtPsePortPolicingEnable readonly
Write access is not required.
cpeExtPsePortPolicingAction readonly
Write access is not required.
cpeExtPsePortPwrManAlloc readonly
Write access is not required.
cpeExtPolicingNotifEnable readonly
Write access is not required.
cpeExtPowerPriorityEnable readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.402.2.1.5
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.
optional cpeExtPsePortPwrMonitorGroup The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces.
optional cpeExtMainPseGroup2 The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group.
optional cpeExtPseGrpPwrGroup The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups.
optional cpeExtPortEntityIndexGroup The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port.
optional cpeExtPortPolicingGroup The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports.
optional cpeExtPdStatsGroup The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices.
optional cpeExtPortPolicingActionGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action.
optional cpeExtPortPwrManAllocGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation.
optional cpeExtPolicingNotifEnableGroup The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPolicingNotifGroup The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPowerPriorityGroup The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature.
optional cpeExtPsePortLldpGroup The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification.
optional cpeExtPsePortCapabilitiesGroup The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities.
optional cpeExtPsePortLldpPowerGroup The cpeExtPsePortLldpPowerGroup is mandatory for agents
that support Power via MDI TLV in LLDP protocol.
Object refinements
ObjectAccessSyntaxDescription
cpeExtPsePortEnable readonly
Write access is not required.
cpeExtPsePortPwrMax readonly
Write access is not required.
cpeExtPsePortPolicingEnable readonly
Write access is not required.
cpeExtPsePortPolicingAction readonly
Write access is not required.
cpeExtPsePortPwrManAlloc readonly
Write access is not required.
cpeExtPolicingNotifEnable readonly
Write access is not required.
cpeExtPowerPriorityEnable readonly
Write access is not required.

OID .1.3.6.1.4.1.9.9.402.2.1.6
The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB.
Required groups
mandatory cpeExtPsePortGroup
optional cpeExtPsePortGlobalConfigGroup The cpeExtPsePortGlobalConfigGroup is mandatory for agents
that support global configurations on the PSE interfaces.
optional cpeExtPsePortPwrMonitorGroup The cpeExtPsePortPwrMonitorGroup is mandatory for agents
that provide power monitoring on PD's connected to the
PSE interfaces.
optional cpeExtMainPseGroup2 The cpeExtMainPseGroup2 is mandatory for agents
that need additional information to identify the PSE
group.
optional cpeExtPseGrpPwrGroup The cpeExtPseGrpPwrGroup is mandatory for agents
that support the power consumption monitoring for
PSE groups.
optional cpeExtPortEntityIndexGroup The cpeExtPortEntityIndexGroup is mandatory for agents
that needs additional info to identify the interfaces
of the PSE port.
optional cpeExtPortPolicingGroup The cpeExtPortPolicingGroup is mandatory for agents
that provide power consumption policing for the PSE
ports.
optional cpeExtPdStatsGroup The cpeExtPdStatsGroup is mandatory for agents
that provide the statistics information for powered
devices.
optional cpeExtPortPolicingActionGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide control of the power policing
action.
optional cpeExtPortPwrManAllocGroup The cpeExtPortPolicingActionGroup is mandatory
for agents that provide manual power allocation.
optional cpeExtPolicingNotifEnableGroup The cpeExtPolicingNotifEnableGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPolicingNotifGroup The cpeExtPolicingNotifGroup is mandatory for agents
that provide notifications of power consumption policing
status for the PSE ports.
optional cpeExtPowerPriorityGroup The cpeExtPowerPriorityGroup is mandatory for agents
that support global control of the power priority
feature.
optional cpeExtPsePortLldpGroup The cpeExtPsePortLldpGroup is mandatory for agents
that support the LLDP based Data Link Layer
power classification.
optional cpeExtPsePortCapabilitiesGroup The cpeExtPsePortCapabilitiesGroup is mandatory for agents
that support PSE port capabilities.
optional cpeExtPsePortLldpPowerGroup The cpeExtPsePortLldpPowerGroup is mandatory for agents
that support Power via MDI TLV in LLDP protocol.
optional cpeExtPseInfoPwrGroup The cpeExtPseInfoPwrGroup is mandatory for agents
that support used and remaining power info for PSE groups.
Object refinements
ObjectAccessSyntaxDescription
cpeExtPsePortEnable readonly
Write access is not required.
cpeExtPsePortPwrMax readonly
Write access is not required.
cpeExtPsePortPolicingEnable readonly
Write access is not required.
cpeExtPsePortPolicingAction readonly
Write access is not required.
cpeExtPsePortPwrManAlloc readonly
Write access is not required.
cpeExtPolicingNotifEnable readonly
Write access is not required.
cpeExtPowerPriorityEnable readonly
Write access is not required.
Notifications / Traps (1)
NameOIDDescription
cpeExtPolicingNotif
cpeExtPsePortPolicingAction cpeExtPsePortAdditionalStatus cpeExtPsePortPwrAllocated cpeExtPsePortMaxPwrDrawn
.1.3.6.1.4.1.9.9.402.0.1
This notification is generated when the 'overdraw' or
'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus
is set or cleared.