CISCO-L4L7MODULE-REDUNDANCY-MIB Table View

This table is for configuring peer groups that are
part of redundancy configuration. The peer configuration
specifies the information used for exchanging High 
Availability information related to redundancy groups.

clrPeerConfigEntry row .1.3.6.1.4.1.9.9.650.1.1.1.1

An entry in clrPeerConfigTable. Each entry contains information
about peer interface, query interface, heart beat
count and heart beat time.

Indexes

ENTITY-MIBentPhysicalIndex clrPeerId

Column	Syntax	OID
clrPeerId This object identifies unique id for the peer. The peer is used in redundancy configuration.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.650.1.1.1.1.1
clrPeerInterface This object specifies the interface used by the peers to exchange High Availability ( HA ) protocol information.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.650.1.1.1.1.2
clrPeerBackupInterface This object specifies the backup interface used by the peer. The backup interface is used in case the heart beat message is not received. This interface is used to send the heart beat message. If the message sent is n…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.650.1.1.1.1.3
clrPeerHeartBeatTime The time interval between heartbeat/keep-alive messages exchanged between the peers.	millisecondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.650.1.1.1.1.4
clrPeerHeartBeatCount This object is used in conjunction with 'clrPeerHeartBeatTime' to switch over the active redundancy unit or not. Switch over occurs if heartbeats are not received from the peer during a specific time period, which i…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.650.1.1.1.1.5
clrPeerStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.650.1.1.1.1.6
clrPeerRowStatus This object is used for adding/deleting entries from the table. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description claus…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.650.1.1.1.1.7

This table contains information of the redundancy peer.

clrPeerInfoEntry row .1.3.6.1.4.1.9.9.650.1.1.2.1

An entry in peer information table. An entry will get created
whenever an entry is created in clrPeerConfigTable. Each entry
contains information such as peer state, peer ip address,
software and license compatibility. …

Indexes

ENTITY-MIBentPhysicalIndex clrPeerId

Column	Syntax	OID
clrPeerOperStatus This object identifies the current status of the peer. The possible values are init(1) : The initial state of the peer. localIPaddr(2) : The local device IP address is missing. …	Enumeration Enumerated Values: 1 init 2 localIPaddr 3 peerIPAddr 4 startHB 5 tcpSetup 6 srgCheck 7 licCheck 8 compatible 9 peerInterfaceDown 10 down 11 error	.1.3.6.1.4.1.9.9.650.1.1.2.1.1
clrPeerIpAddressType The type of internet address by which the peer is reachable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.650.1.1.2.1.2
clrPeerIpAddress This Internet address for the redundant peer. The type of this address is determined by the value of the clrPeerIpAddressType object.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.650.1.1.2.1.3
clrPeerSoftwareCompatibilty Indicates whether the software version of the local device and the software version of the peer are compatible. The possible values are: init(1) : initialization state. compatible(2) : software version of…	Enumeration Enumerated Values: 1 init 2 compatible 3 inCompatible 4 warmCompatible	.1.3.6.1.4.1.9.9.650.1.1.2.1.4
clrPeerLicenseCompatibility Indicates whether the license of the local device and the license of the peer device are compatible. The possible values are: init(1) : initialization state. compatible(2) : license version of the local…	Enumeration Enumerated Values: 1 init 2 compatible 3 inCompatible	.1.3.6.1.4.1.9.9.650.1.1.2.1.5
clrPeerRedGroups This object refers to the number of redundancy groups the peer is associated with.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.650.1.1.2.1.6

This table is used for configuring
redundancy groups. The redundancy group
is configured by specifying the same
value of 'clrRedGroupId' in multiple devices.

clrRedundancyConfigEntry row .1.3.6.1.4.1.9.9.650.1.1.3.1

An entry in redundancy table.
Each entry contains information such
as priority, preempt. Preemption
ensures that the group member with high priority
always becomes active. The entPhysicalIndex
specifies the entry in ent…

Indexes

ENTITY-MIBentPhysicalIndex clrRedGroupId

Column	Syntax	OID
clrRedGroupId This object specifies the redundancy group identifier. This is the unique id of the redundancy group.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.4.1.9.9.650.1.1.3.1.1
clrRedPeerId The peer ID to which this group belongs. There must be an entry in clrPeerConfigTable with this value. This object cannot be modified if the associated clrRedRowStatus object is equal to 'active'.	Unsigned32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.650.1.1.3.1.2
clrRedPriority The priority value of the redundancy group. This value is used in selecting the active and standby peer. The devices that belong to the same redundancy group must be configured with a different priority. …	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.650.1.1.3.1.3
clrRedPreempt This specifies whether a high priority redundancy device can become active irrespective of the time at which it is online. The value 'true' specifies that the redundancy group with higher priority will al…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.650.1.1.3.1.4
clrRedFailOverTime The time to wait before standby redundancy group become active. This represents the amount of time a module need to wait after the last keep-alive message is received before assuming the peer is not operating.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.650.1.1.3.1.5
clrRedState The current redundancy state.	CiscoL4L7RedState Type Values: 1 other 2 nonRedundant 3 initializing 4 negotiation 5 active 6 standbyCold 7 standbyConfig 8 standbyBulk 9 standbyHot 10 standbyWarm	.1.3.6.1.4.1.9.9.650.1.1.3.1.6
clrRedStateChangeTime The time of the last change in the current redundancy state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.650.1.1.3.1.7
clrRedContext This object refers to the context name to which the redundant group is associated with. The context refers to the logical partitioning within a device. The context can be identified by a unique name in a device.	OctetStringr/w	.1.3.6.1.4.1.9.9.650.1.1.3.1.8
clrRedStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.650.1.1.3.1.9
clrRedRowStatus This object is used for adding/deleting entries from the table. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description claus…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.650.1.1.3.1.10

This table contains information on the
devices that are part of redundancy group.

clrRedundancyInfoEntry row .1.3.6.1.4.1.9.9.650.1.1.4.1

An entry in redundancy information table.
An entry will get created whenever an
entry is created in clrRedundancyConfigTable.
Each entry contains information such
as priority, state and last time
when the redundancy st…

Indexes

ENTITY-MIBentPhysicalIndex clrRedGroupId

Column	Syntax	OID
clrRedundancyPriority The priority value of this redundancy entry. This value is same as the value configured in 'clrRedPriority' for a redundancy group.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.650.1.1.4.1.1
clrRedundancyState The current redundancy state.	CiscoL4L7RedState Type Values: 1 other 2 nonRedundant 3 initializing 4 negotiation 5 active 6 standbyCold 7 standbyConfig 8 standbyBulk 9 standbyHot 10 standbyWarm	.1.3.6.1.4.1.9.9.650.1.1.4.1.2
clrRedundancyStateChangeTime The time of the last change in the current redundancy state.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.650.1.1.4.1.3
clrRedundancyIpAddressType The type of internet address by which this redundant device reachable.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.650.1.1.4.1.4
clrRedundancyIpAddress This object identifies the Internet address by which this redundant device is reachable. The type of this address is determined by the value of the clrRedundancyIpAddressType object.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.650.1.1.4.1.5

This table contains the load balance statistics
related to a redundancy group.

clrLBStatsEntry row .1.3.6.1.4.1.9.9.650.1.2.1.1

Each entry represents the load balance statistics
applicable for a redundancy group. The entPhysicalIndex
specifies the entry in entPhysicalTable.
The entries will get created in this table
by way of adding entries in…

Indexes

ENTITY-MIBentPhysicalIndex clrRedGroupId

Column	Syntax	OID
clrLBStatsSharedStickyEntries This object indicates the number of sticky entries that the local device sent to the peer. Sticky entries is a LB configuration which allows multiple connections from the same client to be sent to the same server. Stick…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.1
clrLBStatsSentPackets This object contains the number of valid packets that the local device sent to the peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.2
clrLBStatsSendFailures This object contains the number of packets that the local device attempted to send to the peer, but failed.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.3
clrLBStatsDroppedEntries This object contains the number of sticky entries that the peer sent to the local device, but the local device discarded them.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.4
clrLBStatsReceivedPackets This object contains the number of valid packets that the local device received from the peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.5
clrLBStatsReceiveFailures This object contains the number of packets that the peer sent to the local device, but the local device failed to receive them.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.1.1.6

This table contains the statistics related to
a redundant peer.

clrHAStatsEntry row .1.3.6.1.4.1.9.9.650.1.2.2.1

Each entry represents the statistics
applicable for a redundant peer.
The entPhysicalIndex specifies the
entry in entPhysicalTable .
The entries will get created in this table
by way of adding entries in clrPeerConfigT…

Indexes

ENTITY-MIBentPhysicalIndex clrPeerId

Column	Syntax	OID
clrHAStatsTxHeartBeatMsgs This object refers to the number of heart beat messages sent to the peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.1
clrHAStatsRxHeartBeatMsgs This object refers to the number of heart beat messages received from the peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.2
clrHAStatsMissedHeartBeatMsgs This object refers to the number of missed heart beat messages.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.3
clrHAStatsRxUniDirectionalHeartBeatMsgs This object indicates that the heartbeat messages from a peer is unidirectional. That is, the peer cannot receive ( only send ) heartbeats.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.4
clrHAStatsHeartBeatTimeoutMismatches Each HB packet contains the configured interval in the packet. When a peer receives a HB packet, it checks to see if the interval in the HB packet matches the interval configured locally. This object indicates the numbe…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.5
clrHAStatsPeerUpEvents This object contains the number of peer up messages that the local device sent to the remote peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.6
clrHAStatsPeerDownEvents This object contains the number of peer down messages that the local device sent to the remote peer.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.9.650.1.2.2.1.7