CISCO-L4L7MODULE-REDUNDANCY-MIB

        The L4-7 SLB devices are used
for scaling websites, building web
enabled applications, and migrating 
to web services. The following services
( but not limited to ) can be provided by 
L4-7 slb devices:
  SLB ( Server Load Balancing )
  FW  ( Firewall )
  SSL ( Secure Socket Layer )
  IDS ( Intrusion Detection System ) .
        
This MIB provides the tables/objects that
support redundancy configuration and
redundancy statistics.
        
The redundancy model supported by this MIB
allows two or more SLB devices to be 
configured with one or more redundancy
group. Each redundancy group is identified by
a unique group ID. Two or more devices are 
redundant to each other if they use the
same redundancy Group ID.
        
Acronyms and terms:
   HB          Heart Beat
   FT          Fault Tolerant
   HA          High Availability
   VLAN        Virtual Local Area Network
   LB          Load Balance
    
Source file
CISCO-L4L7MODULE-REDUNDANCY-MIB
Last revised
Identity
ciscoL4L7moduleRedundancyMIB
Base OID
1.3.6.1.4.1.9.9.650
Imported Objects
CISCO-SMI ciscoMgmt
ENTITY-MIB entPhysicalIndex
IF-MIB InterfaceIndex InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter64 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-L4L7MODULE-REDUNDANCY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-L4L7MODULE-REDUNDANCY-MIB::ciscoL4L7moduleRedundancyMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-L4L7MODULE-REDUNDANCY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-L4L7MODULE-REDUNDANCY-MIB::ciscoL4L7moduleRedundancyMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (63)
.1.3.6.1.4.1.9.9.650
.1.3.6.1.4.1.9.9.650.0
.1.3.6.1.4.1.9.9.650.1
.1.3.6.1.4.1.9.9.650.1.1
.1.3.6.1.4.1.9.9.650.1.1.1
.1.3.6.1.4.1.9.9.650.1.1.1.1
Unsigned32
.1.3.6.1.4.1.9.9.650.1.1.1.1.1
.1.3.6.1.4.1.9.9.650.1.1.1.1.2
.1.3.6.1.4.1.9.9.650.1.1.1.1.3
.1.3.6.1.4.1.9.9.650.1.1.1.1.4
.1.3.6.1.4.1.9.9.650.1.1.1.1.5
.1.3.6.1.4.1.9.9.650.1.1.1.1.6
.1.3.6.1.4.1.9.9.650.1.1.1.1.7
.1.3.6.1.4.1.9.9.650.1.1.2
.1.3.6.1.4.1.9.9.650.1.1.2.1
Enumeration
.1.3.6.1.4.1.9.9.650.1.1.2.1.1
.1.3.6.1.4.1.9.9.650.1.1.2.1.2
.1.3.6.1.4.1.9.9.650.1.1.2.1.3
Enumeration
.1.3.6.1.4.1.9.9.650.1.1.2.1.4
Enumeration
.1.3.6.1.4.1.9.9.650.1.1.2.1.5
.1.3.6.1.4.1.9.9.650.1.1.2.1.6
.1.3.6.1.4.1.9.9.650.1.1.3
.1.3.6.1.4.1.9.9.650.1.1.3.1
Unsigned32
.1.3.6.1.4.1.9.9.650.1.1.3.1.1
.1.3.6.1.4.1.9.9.650.1.1.3.1.10
Unsigned32
.1.3.6.1.4.1.9.9.650.1.1.3.1.2
Unsigned32
.1.3.6.1.4.1.9.9.650.1.1.3.1.3
.1.3.6.1.4.1.9.9.650.1.1.3.1.4
.1.3.6.1.4.1.9.9.650.1.1.3.1.5
.1.3.6.1.4.1.9.9.650.1.1.3.1.6
.1.3.6.1.4.1.9.9.650.1.1.3.1.7
OctetString
.1.3.6.1.4.1.9.9.650.1.1.3.1.8
.1.3.6.1.4.1.9.9.650.1.1.3.1.9
.1.3.6.1.4.1.9.9.650.1.1.4
.1.3.6.1.4.1.9.9.650.1.1.4.1
Unsigned32
.1.3.6.1.4.1.9.9.650.1.1.4.1.1
.1.3.6.1.4.1.9.9.650.1.1.4.1.2
.1.3.6.1.4.1.9.9.650.1.1.4.1.3
.1.3.6.1.4.1.9.9.650.1.1.4.1.4
.1.3.6.1.4.1.9.9.650.1.1.4.1.5
.1.3.6.1.4.1.9.9.650.1.2
.1.3.6.1.4.1.9.9.650.1.2.1
.1.3.6.1.4.1.9.9.650.1.2.1.1
.1.3.6.1.4.1.9.9.650.1.2.1.1.1
.1.3.6.1.4.1.9.9.650.1.2.1.1.2
.1.3.6.1.4.1.9.9.650.1.2.1.1.3
.1.3.6.1.4.1.9.9.650.1.2.1.1.4
.1.3.6.1.4.1.9.9.650.1.2.1.1.5
.1.3.6.1.4.1.9.9.650.1.2.1.1.6
.1.3.6.1.4.1.9.9.650.1.2.2
.1.3.6.1.4.1.9.9.650.1.2.2.1
.1.3.6.1.4.1.9.9.650.1.2.2.1.1
.1.3.6.1.4.1.9.9.650.1.2.2.1.2
.1.3.6.1.4.1.9.9.650.1.2.2.1.3
.1.3.6.1.4.1.9.9.650.1.2.2.1.4
.1.3.6.1.4.1.9.9.650.1.2.2.1.5
.1.3.6.1.4.1.9.9.650.1.2.2.1.6
.1.3.6.1.4.1.9.9.650.1.2.2.1.7
.1.3.6.1.4.1.9.9.650.1.3
.1.3.6.1.4.1.9.9.650.1.3.1
.1.3.6.1.4.1.9.9.650.2
.1.3.6.1.4.1.9.9.650.2.1
.1.3.6.1.4.1.9.9.650.2.2
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (1)
Enumeration
other(1)
nonRedundant(2)
initializing(3)
negotiation(4)
active(5)
standbyCold(6)
standbyConfig(7)
standbyBulk(8)
standbyHot(9)
standbyWarm(10)
Conformance Groups (6)
This group contains the peer configuration objects.
.1.3.6.1.4.1.9.9.650.2.2.1
This group contains the redundancy configuration objects.
.1.3.6.1.4.1.9.9.650.2.2.2
This group contains the redundancy information objects.
.1.3.6.1.4.1.9.9.650.2.2.3
The collection of objects to control the
notifications for state changed in a L4
redundancy configuration.
.1.3.6.1.4.1.9.9.650.2.2.4
This group contains the notifications related to
redundancy.
.1.3.6.1.4.1.9.9.650.2.2.5
This group contains objects related to redundant peer and
load balacing statistics.
.1.3.6.1.4.1.9.9.650.2.2.6
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.650.2.1.1
The compliance statement for entities which implement
the L4L7 Switch Redundancy.
Required groups
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.9.9.650.0.1
The notification generated when the redundancy state
is changed.