clrRedPriority
CISCO-L4L7MODULE-REDUNDANCY-MIB ·
.1.3.6.1.4.1.9.9.650.1.1.3.1.3
Object
column
r/w
Unsigned32
The priority value of the redundancy group.
This value is used in selecting the active
and standby peer.
The devices that belong to the same
redundancy group must be configured with a different
priority. The redundancy group with a highest
priority will become active unit during
negotiation phase of the redundancy.
If two (or more) devices in a group have
the same priority, the one with the highest IP address
of the interface is the active device.
If a redundancy group with high priority
value is online after its peer has become
active, then the group with high priority
will become standby. This behavior can be
changed by setting clrRedPreempt object to
'true'.
Context
- MIB
- CISCO-L4L7MODULE-REDUNDANCY-MIB
- OID
.1.3.6.1.4.1.9.9.650.1.1.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- clrRedundancyConfigEntry
- Table
- clrRedundancyConfigTable
- Siblings
- 9
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| clrRedGroupId This object specifies the redundancy group
identifier. This is the unique id of the
redundancy group. | column | Unsigned32 | .1.3.6.1.4.1.9.9.650.1.1.3.1.1 |
| clrRedRowStatus This object is used for adding/deleting
entries from the table.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate valu… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.650.1.1.3.1.10 |
| clrRedPeerId The peer ID to which this group belongs.
There must be an entry in clrPeerConfigTable
with this value. This object cannot be modified
if the associated clrRedRowStatus object is … | column | Unsigned32 | .1.3.6.1.4.1.9.9.650.1.1.3.1.2 |
| clrRedPreempt This specifies whether a high priority
redundancy device can become active irrespective
of the time at which it is online.
The value 'true' specifies that the redun… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.650.1.1.3.1.4 |
| clrRedFailOverTime The time to wait before standby redundancy
group become active. This represents the amount
of time a module need to wait after the last
keep-alive message is received before ass… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.650.1.1.3.1.5 |
| clrRedState The current redundancy state. | column | CiscoL4L7RedState | .1.3.6.1.4.1.9.9.650.1.1.3.1.6 |
| clrRedStateChangeTime The time of the last change in the current
redundancy state. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.650.1.1.3.1.7 |
| clrRedContext This object refers to the context name to which the redundant
group is associated with. The context refers to the logical
partitioning within a device. The context can be identif… | column | OctetString | .1.3.6.1.4.1.9.9.650.1.1.3.1.8 |
| clrRedStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.650.1.1.3.1.9 |