CISCO-ITP-SP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
227

cItpSpPointCodeTable

table deprecated
.1.3.6.1.4.1.9.9.232.1.2.1 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cItpSpPointCodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-SP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-SP-MIB::cItpSpPointCodeTable'
A table that contain the varies types of point
code defined for this Signalling point.'
Entries are added to this table via
cItpSpRowStatus  in accordance with the RowStatus
convention.
cItpSpPointCodeTableEntry row .1.3.6.1.4.1.9.9.232.1.2.1.1
A list of SP attributes.
Column Syntax OID
The network Indicator for this pointcode.
CISCO-ITP-TC-MIBCItpTcNetworkIndicator
Type Values:
0international
1internationatSpare
2national
3nationalSpare
.1.3.6.1.4.1.9.9.232.1.2.1.1.1
The point code for this SP.
CISCO-ITP-TC-MIBCItpTcPointCode
Type Constraints:
range: 0..16777216
.1.3.6.1.4.1.9.9.232.1.2.1.1.2
The function of this point code
CISCO-ITP-TC-MIBCItpTcPointCodeTyper/w
Type Values:
1primary
2additional
3capability
4xua
.1.3.6.1.4.1.9.9.232.1.2.1.1.3
The point code for this SP.
CISCO-ITP-TC-MIBCItpTcDisplayPC
Type Constraints:
range: 1..12
.1.3.6.1.4.1.9.9.232.1.2.1.1.4
The object is used by a management station to
create or delete the row entry in cItpSpPointCodeTable
following the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.232.1.2.1.1.5

cItpSpLinksetTable

table deprecated
.1.3.6.1.4.1.9.9.232.1.3.1 · 1 row entry · 80 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cItpSpLinksetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-SP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-SP-MIB::cItpSpLinksetTable'
A table of linksets for this SP.
cItpSpLinksetTableEntry row .1.3.6.1.4.1.9.9.232.1.3.1.1
A list of SP linkset attributes for a particular SP
entity.
Column Syntax OID
The name of the linkset.
CISCO-ITP-TC-MIBCItpTcLinksetId
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.1
The point code to which this linkset is connected.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
.1.3.6.1.4.1.9.9.232.1.3.1.1.2
The point code to which this linkset is connected.
CISCO-ITP-TC-MIBCItpTcDisplayPC
Type Constraints:
range: 1..12
.1.3.6.1.4.1.9.9.232.1.3.1.1.3
The point code to which this linkset is connected.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
.1.3.6.1.4.1.9.9.232.1.3.1.1.4
The point code to which this linkset is connected.
CISCO-ITP-TC-MIBCItpTcDisplayPC
Type Constraints:
range: 1..12
.1.3.6.1.4.1.9.9.232.1.3.1.1.5
The list of possible linkset states.
'available' : Traffic may flow over this linkset
'shutdown' : This linkset has been forced to an
unavailable state by an administrative
action.
'unav…
Enumeration
Enumerated Values:
1available
2shutdown
3unavailable
.1.3.6.1.4.1.9.9.232.1.3.1.1.6
Packets are filtered against this access control list
before they are passed to the routing function. A
value of zero indicates that no access control list
is present.
CISCO-ITP-TC-MIBCItpTcAclIdr/w
Type Constraints:
range: 0
range: 2700..2999
.1.3.6.1.4.1.9.9.232.1.3.1.1.7
Packets are filtered against this access control list
after they have passed through the routing function.
A value of zero indicates that no access control list
is present.
CISCO-ITP-TC-MIBCItpTcAclIdr/w
Type Constraints:
range: 0
range: 2700..2999
.1.3.6.1.4.1.9.9.232.1.3.1.1.8
The routing table for Signalling network management
messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.9
The routing table for Signalling network test and
maintenance messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.10
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.11
The routing table for SS7 Signalling Connection
Control Part(SCCP) messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.12
The routing table for Telephone User Part(TUP)
messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.13
The routing table for ISDN User Part messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.14
The routing table for Data User Part (call and
circuit-related messages).
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.15
The routing table for Data User Part (facility
registration and cancellation messages).
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.16
The routing table for MTP Testing User Part
messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.17
The routing table for Broadband ISDN User Part(BISUP)
messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.18
The routing table for Satellite ISDN User Part(SISUP)
messages.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.19
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.20
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.21
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.22
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.23
This routing table has been defined as a spare
routing table by the standards committee.
CISCO-ITP-TC-MIBCItpTcRouteTableNamer/w
Type Constraints:
range: 1..19
.1.3.6.1.4.1.9.9.232.1.3.1.1.24
This indicates if accounting for this linkset is
enabled.

'true' Indicates that the accounting function is
enabled for this linkset and is being
accumulated in cItpSpAccountingTable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.232.1.3.1.1.25
The number of links in this linkset.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.3.1.1.26
Time linkset was providing service related to
Q752/Table 4.2.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.3.1.1.27
Time linkset was Out-of-Service as required for
Q752/Table 4.2.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.3.1.1.28
Alignment ready timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T01r/w
Type Constraints:
range: 5000..150000
.1.3.6.1.4.1.9.9.232.1.3.1.1.29
Not aligned timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T02r/w
Type Constraints:
range: 0
range: 5000..150000
.1.3.6.1.4.1.9.9.232.1.3.1.1.30
Aligned timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T03r/w
Type Constraints:
range: 0
range: 1000..14000
.1.3.6.1.4.1.9.9.232.1.3.1.1.31
Proving period timer emergency timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T04Er/w
Type Constraints:
range: 0
range: 400..660
.1.3.6.1.4.1.9.9.232.1.3.1.1.32
Proving period timer normal timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T04Nr/w
Type Constraints:
range: 0
range: 2007..9500
.1.3.6.1.4.1.9.9.232.1.3.1.1.33
Sending SIB timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T05r/w
Type Constraints:
range: 0
range: 80..120
.1.3.6.1.4.1.9.9.232.1.3.1.1.34
Remote congestion timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T06r/w
Type Constraints:
range: 1000..6000
.1.3.6.1.4.1.9.9.232.1.3.1.1.35
Excessive delay of acknowledgement timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T07r/w
Type Constraints:
range: 0
range: 100..6000
.1.3.6.1.4.1.9.9.232.1.3.1.1.36
Delay to avoid message mis-sequencing on changeover.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T01r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.37
Waiting for changeover acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T02r/w
Type Constraints:
range: 700..2000
.1.3.6.1.4.1.9.9.232.1.3.1.1.38
Time controlled diversion-delay to avoid
mis-sequencing on change back.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T03r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.39
Waiting for change back acknowledgement (first
attempt).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T04r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.40
Waiting for change back acknowledgement (second
attempt).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T05r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.41
Delay to avoid message mis-sequencing on controlled
rerouting.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T06r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.42
Waiting for Signalling data link connection
acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T07r/w
Type Constraints:
range: 0
range: 1000..2000
.1.3.6.1.4.1.9.9.232.1.3.1.1.43
Transfer prohibited inhibition timer (transient
solution).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T08r/w
Type Constraints:
range: 800..1200
.1.3.6.1.4.1.9.9.232.1.3.1.1.44
Waiting to repeat Signalling routeset test message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T10r/w
Type Constraints:
range: 30000..60000
.1.3.6.1.4.1.9.9.232.1.3.1.1.45
Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T11r/w
Type Constraints:
range: 30000..90000
.1.3.6.1.4.1.9.9.232.1.3.1.1.46
Waiting for uninhibit acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T12r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.3.1.1.47
Waiting for force uninhibit.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T13r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.3.1.1.48
Waiting for inhibition acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T14r/w
Type Constraints:
range: 2000..3000
.1.3.6.1.4.1.9.9.232.1.3.1.1.49
Waiting to start Signalling routeset congestion
test.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T15r/w
Type Constraints:
range: 2000..3000
.1.3.6.1.4.1.9.9.232.1.3.1.1.50
Waiting for routeset congestion status update.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T16r/w
Type Constraints:
range: 1400..2000
.1.3.6.1.4.1.9.9.232.1.3.1.1.51
Delay to avoid oscillation of initial alignment
failure and link restart.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T17r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.3.1.1.52
This timers servers different function based on the
variant.

ANSI: Repeat TFR once by response method
ITU: MTP restart link supervision
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T18r/w
Type Constraints:
range: 1000..31000
.1.3.6.1.4.1.9.9.232.1.3.1.1.53
This timers servers different function based on the
variant.

ANSI: failed craft timer referral timer
ITU: supervision timer during MTP restart
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T19r/w
Type Constraints:
range: 67000..600000
.1.3.6.1.4.1.9.9.232.1.3.1.1.54
This timers servers different function based on the
variant.

ANSI: waiting to repeat local inhibit test
ITU: MTP restart timer at the Signalling point
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T20r/w
Type Constraints:
range: 1000..120000
.1.3.6.1.4.1.9.9.232.1.3.1.1.55
This timers servers different function based on the
variant.

ANSI: waiting to repeat remote inhibit test)
ITU: MTP restart timer at adjacent Signalling point
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T21r/w
Type Constraints:
range: 63000..120000
.1.3.6.1.4.1.9.9.232.1.3.1.1.56
This timers servers different function based on the
variant.

ANSI: restarting SP waiting for Signalling links avail
ITU: local inhibit test timer
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T22r/w
Type Constraints:
range: 36000..360000
.1.3.6.1.4.1.9.9.232.1.3.1.1.57
This timers servers different function based on the
variant.

ANSI: restarting SP waiting to receive all TRA msgs
ITU: remote inhibit test timer
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T23r/w
Type Constraints:
range: 9000..360000
.1.3.6.1.4.1.9.9.232.1.3.1.1.58
This timers servers different function based on the
variant.

ANSI: restarting SP waiting to broadcast all TRA msgs
ITU: stabilizing timer after local processor outage
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T24r/w
Type Constraints:
range: 500..60000
.1.3.6.1.4.1.9.9.232.1.3.1.1.59
Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T25r/w
Type Constraints:
range: 0
range: 30000..35000
.1.3.6.1.4.1.9.9.232.1.3.1.1.60
Timer at restarting SP waiting to repeat traffic
restart waiting message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T26r/w
Type Constraints:
range: 0
range: 12000..15000
.1.3.6.1.4.1.9.9.232.1.3.1.1.61
Minimum duration of unavailability for full restart.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T27r/w
Type Constraints:
range: 0
range: 2000..50000
.1.3.6.1.4.1.9.9.232.1.3.1.1.62
Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T28r/w
Type Constraints:
range: 0
range: 3000..35000
.1.3.6.1.4.1.9.9.232.1.3.1.1.63
Timer started when TRA sent in response to unexpected
TRA or TRW.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T29r/w
Type Constraints:
range: 0
range: 60000..65000
.1.3.6.1.4.1.9.9.232.1.3.1.1.64
Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T30r/w
Type Constraints:
range: 0
range: 30000..35000
.1.3.6.1.4.1.9.9.232.1.3.1.1.65
False link congestion detection timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T31r/w
Type Constraints:
range: 0
range: 10000..120000
.1.3.6.1.4.1.9.9.232.1.3.1.1.66
Link oscillation timer - Procedure A.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T32r/w
Type Constraints:
range: 0
range: 5000..120000
.1.3.6.1.4.1.9.9.232.1.3.1.1.67
Probation timer for link oscillation - Procedure B.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T33r/w
Type Constraints:
range: 0
range: 60000..600000
.1.3.6.1.4.1.9.9.232.1.3.1.1.68
Suspension timer for link oscillation - Procedure B.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T34r/w
Type Constraints:
range: 0
range: 5000..120000
.1.3.6.1.4.1.9.9.232.1.3.1.1.69
Signalling Link test acknowledgement timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkTestr/w
Type Constraints:
range: 0
range: 4000..12000
.1.3.6.1.4.1.9.9.232.1.3.1.1.70
Interval timer for sending test messages.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkMessager/w
Type Constraints:
range: 0
range: 30000..90000
.1.3.6.1.4.1.9.9.232.1.3.1.1.71
Link activation retry timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkActRetryr/w
Type Constraints:
range: 0
range: 60000..90000
.1.3.6.1.4.1.9.9.232.1.3.1.1.72
An estimate of the number of bits per second that is
expected to be transmitted over a linkset. This
attribute will be used by network management stations
to generate traps and maintain statistics on linksets
based on…
bpsInteger32r/w
Constraints:
range: 56000-2147483647
range: 0-0
.1.3.6.1.4.1.9.9.232.1.3.1.1.73
Defines the activation priority for linksets. Each
linkset can be defined a priority. The linkset with
the lowest values will be activated first. If two
linksets share the same values they will be
activated in the o…
Unsigned32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.9.9.232.1.3.1.1.74
The list of possible Signalling link types. All links
in the same linkset will be of the same type.
'A-link' : Access link
'B-link' : Bridge link
'C-link' : Cross link
'D-link' : Diagonal link
'E-link' …
Enumerationr/w
Enumerated Values:
1access
2bridge
3cross
4diagonal
5fullyAssoc
.1.3.6.1.4.1.9.9.232.1.3.1.1.75
The object is used by a management station to
create or delete the row entry in cItpSpLinksetTable
following the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.232.1.3.1.1.76
cItpSpLinksetNideprecated
The Network Indicator in which the Linkset resides.
CISCO-ITP-TC-MIBCItpTcNetworkIndicatorr/w
Type Values:
0international
1internationatSpare
2national
3nationalSpare
.1.3.6.1.4.1.9.9.232.1.3.1.1.77
A short identifier for each linkset.
This value can be set by system administrator
or defaults to the linkset name.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.9.9.232.1.3.1.1.78
A textual description for the Signalling point.
OctetStringr/w
Constraints:
range: 0-254
.1.3.6.1.4.1.9.9.232.1.3.1.1.79
The SS7 variant used to format data transmitted
on this linkset.
CISCO-ITP-TC-MIBCItpTcSs7Variantr/w
Type Values:
1ansi
2itu
3china
.1.3.6.1.4.1.9.9.232.1.3.1.1.80

cItpSpLinkTable

table deprecated
.1.3.6.1.4.1.9.9.232.1.4.1 · 1 row entry · 142 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cItpSpLinkTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-SP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-SP-MIB::cItpSpLinkTable'
A table of SP links for this SP.
cItpSpLinkTableEntry row .1.3.6.1.4.1.9.9.232.1.4.1.1
A list of SP link attributes.
Column Syntax OID
cItpSpLinkSlcdeprecated
The Signalling Link Code for this link.
CISCO-ITP-TC-MIBCItpTcLinkSLC
Type Constraints:
range: 0..15
.1.3.6.1.4.1.9.9.232.1.4.1.1.1
A textual description for this link.
OctetStringr/w
Constraints:
range: 0-254
.1.3.6.1.4.1.9.9.232.1.4.1.1.2
cItpSpLinkStatedeprecated
The list of possible links states.
'available' : Traffic may flow over this linkset
'failed' : Traffic management has detected a failure
that prevents activating this linkset.
'shutdown' : This li…
Enumeration
Enumerated Values:
1available
2failed
3shutdown
4unavailable
.1.3.6.1.4.1.9.9.232.1.4.1.1.3
cItpSpLinkTypedeprecated
The link type.
CISCO-ITP-TC-MIBCItpTcLinkTyper/w
Type Values:
1other
2serial
3sctpIp
4hsl
5virtual
.1.3.6.1.4.1.9.9.232.1.4.1.1.4
If the link type specified by cItpSpLinkType is serial
or hsl, this is the ifIndex specified in IF-MIB,
otherwise no significance is to be placed on this value.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.9.9.232.1.4.1.1.5
If the link type specified by cItpSpLinkType is 'sctpIp',
this is the association identifier defined in the
Stream Control Transmission Protocol(SCTP) MIB.
Where value greater than zero indicates
a valid association a…
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.6
The number of MTP3 packets received by this link.
This measurement is specified in Q752/3.5
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.7
The number of MTP3 packets sent by this link.
This measurement is specified in Q752/3.3
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.8
The number of MTP3 bytes received by this link.
This measurement is specified in Q752/3.4
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.9
The number of MTP3 bytes sent by this link.
This measurement is specified in Q752/3.1
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.10
Alignment ready timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T01r/w
Type Constraints:
range: 5000..150000
.1.3.6.1.4.1.9.9.232.1.4.1.1.11
Not aligned timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T02r/w
Type Constraints:
range: 0
range: 5000..150000
.1.3.6.1.4.1.9.9.232.1.4.1.1.12
Aligned timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T03r/w
Type Constraints:
range: 0
range: 1000..14000
.1.3.6.1.4.1.9.9.232.1.4.1.1.13
Proving period timer emergency timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T04Er/w
Type Constraints:
range: 0
range: 400..660
.1.3.6.1.4.1.9.9.232.1.4.1.1.14
Proving period timer normal timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T04Nr/w
Type Constraints:
range: 0
range: 2007..9500
.1.3.6.1.4.1.9.9.232.1.4.1.1.15
Sending SIB timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T05r/w
Type Constraints:
range: 0
range: 80..120
.1.3.6.1.4.1.9.9.232.1.4.1.1.16
Remote congestion timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T06r/w
Type Constraints:
range: 1000..6000
.1.3.6.1.4.1.9.9.232.1.4.1.1.17
Excessive delay of acknowledgement timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp2T07r/w
Type Constraints:
range: 0
range: 100..6000
.1.3.6.1.4.1.9.9.232.1.4.1.1.18
Delay to avoid message mis-sequencing on changeover.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T01r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.19
Waiting for changeover acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T02r/w
Type Constraints:
range: 700..2000
.1.3.6.1.4.1.9.9.232.1.4.1.1.20
Time controlled diversion-delay to avoid
mis-sequencing on change back.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T03r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.21
Waiting for change back acknowledgement (first
attempt).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T04r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.22
Waiting for change back acknowledgement (second
attempt).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T05r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.23
Delay to avoid message mis-sequencing on controlled
rerouting.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T06r/w
Type Constraints:
range: 500..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.24
Waiting for Signalling data link connection
acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T07r/w
Type Constraints:
range: 0
range: 1000..2000
.1.3.6.1.4.1.9.9.232.1.4.1.1.25
Transfer prohibited inhibition timer (transient
solution).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T08r/w
Type Constraints:
range: 800..1200
.1.3.6.1.4.1.9.9.232.1.4.1.1.26
Waiting to repeat Signalling routeset test message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T10r/w
Type Constraints:
range: 30000..60000
.1.3.6.1.4.1.9.9.232.1.4.1.1.27
Transfer restricted timer. (This is one way of
implementing the function described in 13.4/Q.704 and
mainly intended to simplify SPs.).
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T11r/w
Type Constraints:
range: 30000..90000
.1.3.6.1.4.1.9.9.232.1.4.1.1.28
Waiting for uninhibit acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T12r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.4.1.1.29
Waiting for force uninhibit.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T13r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.4.1.1.30
Waiting for inhibition acknowledgement.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T14r/w
Type Constraints:
range: 2000..3000
.1.3.6.1.4.1.9.9.232.1.4.1.1.31
Waiting to start Signalling routeset congestion
test.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T15r/w
Type Constraints:
range: 2000..3000
.1.3.6.1.4.1.9.9.232.1.4.1.1.32
Waiting for routeset congestion status update.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T16r/w
Type Constraints:
range: 1400..2000
.1.3.6.1.4.1.9.9.232.1.4.1.1.33
Delay to avoid oscillation of initial alignment
failure and link restart.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T17r/w
Type Constraints:
range: 800..1500
.1.3.6.1.4.1.9.9.232.1.4.1.1.34
This timers servers different function based on the
variant.

ANSI: Repeat TFR once by response method
ITU: MTP restart link supervision
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T18r/w
Type Constraints:
range: 1000..31000
.1.3.6.1.4.1.9.9.232.1.4.1.1.35
This timers servers different function based on the
variant.

ANSI: failed craft timer referral timer
ITU: supervision timer during MTP restart
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T19r/w
Type Constraints:
range: 67000..600000
.1.3.6.1.4.1.9.9.232.1.4.1.1.36
This timers servers different function based on the
variant.

ANSI: waiting to repeat local inhibit test
ITU: MTP restart timer at the Signalling point
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T20r/w
Type Constraints:
range: 1000..120000
.1.3.6.1.4.1.9.9.232.1.4.1.1.37
This timers servers different function based on the
variant.

ANSI: waiting to repeat remote inhibit test)
ITU: MTP restart timer at adjacent Signalling point
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T21r/w
Type Constraints:
range: 63000..120000
.1.3.6.1.4.1.9.9.232.1.4.1.1.38
This timers servers different function based on the
variant.

ANSI: restarting SP waiting for Signalling links avail
ITU: local inhibit test timer
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T22r/w
Type Constraints:
range: 36000..360000
.1.3.6.1.4.1.9.9.232.1.4.1.1.39
This timers servers different function based on the
variant.

ANSI: restarting SP waiting to receive all TRA msgs
ITU: remote inhibit test timer
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T23r/w
Type Constraints:
range: 9000..360000
.1.3.6.1.4.1.9.9.232.1.4.1.1.40
This timers servers different function based on the
variant.

ANSI: restarting SP waiting to broadcast all TRA msgs
ITU: stabilizing timer after local processor outage
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T24r/w
Type Constraints:
range: 500..60000
.1.3.6.1.4.1.9.9.232.1.4.1.1.41
Timer at Signalling Point (SP) adjacent to restarting
SP, waiting for traffic restart allowed message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T25r/w
Type Constraints:
range: 0
range: 30000..35000
.1.3.6.1.4.1.9.9.232.1.4.1.1.42
Timer at restarting SP waiting to repeat traffic
restart waiting message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T26r/w
Type Constraints:
range: 0
range: 12000..15000
.1.3.6.1.4.1.9.9.232.1.4.1.1.43
Minimum duration of unavailability for full restart.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T27r/w
Type Constraints:
range: 0
range: 2000..50000
.1.3.6.1.4.1.9.9.232.1.4.1.1.44
Timer at SP adjacent to restarting SP waiting for
traffic restart waiting message.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T28r/w
Type Constraints:
range: 0
range: 3000..35000
.1.3.6.1.4.1.9.9.232.1.4.1.1.45
Timer started when TRA sent in response to unexpected
TRA or TRW.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T29r/w
Type Constraints:
range: 0
range: 60000..65000
.1.3.6.1.4.1.9.9.232.1.4.1.1.46
Timer to limit sending of TFPs and TFRs in response
to unexpected TRA or TRW.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T30r/w
Type Constraints:
range: 0
range: 30000..35000
.1.3.6.1.4.1.9.9.232.1.4.1.1.47
False link congestion detection timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T31r/w
Type Constraints:
range: 0
range: 10000..120000
.1.3.6.1.4.1.9.9.232.1.4.1.1.48
Link oscillation timer - Procedure A.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T32r/w
Type Constraints:
range: 0
range: 5000..120000
.1.3.6.1.4.1.9.9.232.1.4.1.1.49
Probation timer for link oscillation - Procedure B.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T33r/w
Type Constraints:
range: 0
range: 60000..600000
.1.3.6.1.4.1.9.9.232.1.4.1.1.50
Suspension timer for link oscillation - Procedure B.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerMtp3T34r/w
Type Constraints:
range: 0
range: 5000..120000
.1.3.6.1.4.1.9.9.232.1.4.1.1.51
Signalling Link test acknowledgement timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkTestr/w
Type Constraints:
range: 0
range: 4000..12000
.1.3.6.1.4.1.9.9.232.1.4.1.1.52
Interval timer for sending test messages.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkMessager/w
Type Constraints:
range: 0
range: 30000..90000
.1.3.6.1.4.1.9.9.232.1.4.1.1.53
Link activation retry timer.
millisecondsCISCO-ITP-TC-MIBCItpTcTimerLinkActRetryr/w
Type Constraints:
range: 0
range: 60000..90000
.1.3.6.1.4.1.9.9.232.1.4.1.1.54
Number of packets waiting to be sent over this link.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.55
This is the maximum number of packets waiting
to be sent over this link since the last time this
value was reset as indicated by
cItpSpLinkXmitQueueDepthHighReset.
Resetting this object is achieved by setting this
obj…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.56
This indicates when cItpSpLinkXmitQueueDepthHigh
was set to 0.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.232.1.4.1.1.57
The Signalling link congestion status of this link. 0
is the least congestion level, 3 is the highest
congestion level.
Unsigned32
Constraints:
range: 0-3
.1.3.6.1.4.1.9.9.232.1.4.1.1.58
Threshold used to abate congestion level 1.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.59
Threshold used to abate congestion level 2.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.60
Threshold used to abate congestion level 3.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.61
Threshold used to mark onset of congestion level 1.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.62
Threshold used to mark onset of congestion level 2.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.63
Threshold used to mark onset of congestion level 3.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.64
Indicated if Signalling link test is enabled on this
link.

true : Signalling link test is enabled.
false : Signalling link test not enabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.232.1.4.1.1.65
Duration of link in the In-Service state Q752/1.1.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.66
Count of Signalling Link failures - All reasons Q752/1.2.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.67
Count of Signalling Link failures - Abnormal FIBR/BSNR
Q752/1.3.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.68
Count of Signalling Link failures - Excessive delay of
acknowledgement Q752/1.4.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.69
Count of Signalling Link failures - Excessive error rate
Q752/1.5.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.70
Count of Signalling Link failures - Excessive duration
of congestion Q752/1.6.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.71
Count of alignment or proving errors Q752/1.7.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.72
Count of signal units received in error Q752/1.8.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.73
Count of negative acknowledgements received Q752/1.9.
negative acknowledgementsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.74
Count of 'local automatic changeover' events
Q752/1.10.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.75
Count of 'local automatic changeback' events Q752/1.11.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.76
Duration of Signalling Link unavailable(for any reason)
Q752/2.1.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.77
Duration of Signalling Link unavailable due to local
management actions Q752/2.5.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.78
Duration of Signalling Link unavailable due to remote
management actions Q752/2.6.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.79
Duration of Signalling Link unavailable due to link
failure Q752/2.7.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.80
Duration of Signalling Link unavailable due to remote
processor outage Q752/2.9.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.81
Count of 'remote processor outage' events Q752/2.10 and
Q752/2.11. The standard only requires that events are
issued. The entries have been combined into a single
entry to track all occurrences of these event types.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.82
Duration of local busy Q752/2.15.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.83
Count of local inhibition Q752/2.16 and Q752/2.17.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences of these event types.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.84
Count of remote inhibition Q752/2.18 and Q752/2.19.
The standard only requires that events are issued.
The entries have been combined into a single
entry to track all occurrences of these event types.
occurrencesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.85
The number of MTP3 packets retransmitted on this link.
This measurement is specified in Q752/3.2
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.86
The number of MTP3 bytes retransmitted on this link.
This measurement is specified in Q752/3.2
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.87
The number times this Signalling link was marked
congested. This measurement is specified in Q752/3.6
eventsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.88
Cumulative duration of Signalling link congestion
Q752/3.7.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.89
The number of packets(MSUs) discarded due to Signalling
link level 1 congestion Q752/3.10
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.90
The number of packets(MSUs) discard due to Signalling
link level 2 congestion Q752/3.10
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.91
The number of packets(MSUs) discard due to Signalling
link level 3 congestion Q752/3.10
PacketsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.92
The number times this Signalling link entered congestion
level 1 and packets were discarded. This measurement is
specified in Q752/3.11
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.93
The number times this Signalling link entered congestion
level 2 and packets were discarded. This measurement is
specified in Q752/3.11
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.94
The number times this Signalling link entered congestion
level 3 and packets were discarded. This measurement is
specified in Q752/3.11
bytesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.95
When cItpSpLinkType is set to sctpIp then this object
contains the type of the first of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
t…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.232.1.4.1.1.96
When cItpSpLinkType is set to sctpIp then this object
contains the type of the second of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.232.1.4.1.1.97
When cItpSpLinkType is set to sctpIp then this object
contains the type of the third of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
t…
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.232.1.4.1.1.98
When cItpSpLinkType is set to sctpIp then this object
contains the type of the fourth of four possible local
IP addresses used to create the association supporting
this link. When cItpSpLinkType is not set to sctpIp
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.232.1.4.1.1.99
When cItpSpLinkType is set to sctpIp then this object
contains the first of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
signif…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.232.1.4.1.1.100
When cItpSpLinkType is set to sctpIp then this object
contains the second of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
signi…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.232.1.4.1.1.101
When cItpSpLinkType is set to sctpIp then this object
contains the third of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
signif…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.232.1.4.1.1.102
When cItpSpLinkType is set to sctpIp then this object
contains the fourth of four possible local IP addresses
used to create the association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
signi…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.232.1.4.1.1.103
When cItpSpLinkType is set to sctpIp then this object
contains the local port number used to create the
association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed on…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.104
When cItpSpLinkType is set to sctpIp then this object
contains the remote port number used to create the
association supporting this link.
When cItpSpLinkType is not set to sctpIp then no
significance is to be placed o…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.105
When cItpSpLinkType is set to sctpIp then this object
contains the quality of service class to be assigned
to packets sent on this association.
When cItpSpLinkType is not set to sctpIp then no
significance is to be pla…
CISCO-ITP-TC-MIBCItpTcQosr/w
Type Constraints:
range: 0..7
range: 255
.1.3.6.1.4.1.9.9.232.1.4.1.1.106
The object is used by a management station to
create or delete the row entry in cItpSpLinkTable
following the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.232.1.4.1.1.107
This object provides additional information
on the state of a link as follows.

'localInhibit' : Link has been inhibited by a local
management operation.
'remoteInhibit' : LInk has bee…
Bits
Enumerated Values:
0localInhibit
1remoteInhibit
2blocked
.1.3.6.1.4.1.9.9.232.1.4.1.1.108
A short identifier for each link linkset.
This value can be set by system administrator
or defaults to the linkset name and SLC
formatted as an ASCII string.
OctetStringr/w
Constraints:
range: 0-30
.1.3.6.1.4.1.9.9.232.1.4.1.1.109
The number of packets that were dropped by this link.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.110
The number of Link Status Signal Units sent on this
link.
LSSUSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.111
The number of Link Status Signal Units received on this
link.
LSSUSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.112
This object provide details on the protocol states
for this link as follows.

Changeback control(TCBC)
'tcbcBuffering': Changeback control is buffering data
on this l…
Bits
Enumerated Values:
0tcbcBuffering
1tcocBuffering
2tlacAdjacentSpRestarting
3tlacEmergencyCoInProgress
4tlacChangebackInProgress
5tlacChangeoverInProgress
6tlacChangeoverFailed
7tlacInhibitRetry
8tlacManagementRequest
9tlacSpRestarting
10tsrcChangeOverComplete
11tsrcAdjacentSpRestart
.1.3.6.1.4.1.9.9.232.1.4.1.1.113
Signalling link activity control state:
'undefined(1)' - link is an undefined state
'inactive(2)' - A Signalling link that is not in
operation.
'active(3)' - A Signalling link that is in
Enumeration
Enumerated Values:
1undefined
2inactive
3active
4activatingRestoring
5failed
6actT17wait
7actAnsiWaitDeloaded
8actItuWaitStmReady
.1.3.6.1.4.1.9.9.232.1.4.1.1.114
Signalling traffic management routing control state:
'undefined(1)' - link is an undefined state
'idle(2)' - traffic mangement is idle
'wait5(3)' - traffic management is active and
in the send…
Enumeration
Enumerated Values:
1undefined
2idle
3wait5
.1.3.6.1.4.1.9.9.232.1.4.1.1.115
Changeover control State:
'undefined(1)' - Link is an undefined state.
'idle(2)' - Link is available and idle.
'wait2(3)' - Wait for MTP2 to initialize link.
'waitForAck(4)' - Waiting for changeover
Enumeration
Enumerated Values:
1undefined
2idle
3wait2
4waitForAck
5retrieving
6wait5
7wait7
8wait8
.1.3.6.1.4.1.9.9.232.1.4.1.1.116
The local backward sequence number to be transmitted.
CItpSpSequenceNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.117
The remote backward sequence number to be transmitted.
CItpSpSequenceNumber
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.9.9.232.1.4.1.1.118
Changeback control State:
'undefined(1)' - link is an undefined state.
'idle(2)' - Link is available and idle.
'firstAttempt(3)' - First attempt at changeback.
'secondAttempt(4)' - Second attempt at change…
Enumeration
Enumerated Values:
1undefined
2idle
3firstAttempt
4secondAttempt
5timeControlledDiversion
.1.3.6.1.4.1.9.9.232.1.4.1.1.119
The number of status indicator 'busy' link status signal
units received on this link. The SIB indicates that
level two is congested at the transmitting Signalling
point.
SIBSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.120
The number of status indicator 'busy' link status signal
units transmitted on this link. The SIB indicates that
level two is congested at the transmitting Signalling
point.
SIBSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.121
The number of times the alignment ready timer has
expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.122
The number of times the not alignment ready timer has
expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.123
The number of times the aligned timer has
expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.124
The number of times the proving period timer
has expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.125
The number of times the sending status indicator
busy timer has expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.126
The number of times the remote congestion
timer has expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.127
The number of times the excessive delay of
acknowledgement timer has expired on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.128
The number of times the Alignment Error Rate Monitor
procedure was started on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.129
The number of times the Alignment Error Rate Monitor
procedure failed on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.130
The number of times the Signal Unit Error Rate Monitor
procedure was started on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.131
The number of times the Signal Unit Error Rate Monitor
procedure failed on this link.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.132
An estimate of the number of bits per second that is
expected to be received from this link. This
object will be used in combination with
cItpSpUtilSampleInterval, cItpSpUtilThreshold,
cItpSpUtilThreshold and cItpSp…
bits per secondCItpSpLinkCapacityr/w
Type Constraints:
range: 0
range: 56000..2147483647
.1.3.6.1.4.1.9.9.232.1.4.1.1.133
This object specifies the threshold used to
to generate the cItpSpLinkRcvdUtilChange notification.
The value of zero indicates the threshold has not been
defined at the link level and the value from the
cItpSpUtilTh…
percentCItpSpPercentThresholdr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.232.1.4.1.1.134
An estimate of the utilization of this link for traffic
received on this link in the prior time period defined
by the cItpSpUtilSampleInterval object.
percentCItpSpLinkUtilization
Type Constraints:
range: 0..999
.1.3.6.1.4.1.9.9.232.1.4.1.1.135
Link Utilization State for in bound traffic.
CItpSpLinkUtilizationState
Type Values:
0unMonitored
1underThreshold
2overThreshold
.1.3.6.1.4.1.9.9.232.1.4.1.1.136
A count of the bytes received on the link including the
additional bytes required by underlying protocols.
This provides a transport independent mechanism
for collection information on link utilization.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.137
An estimate of the number of bits per second that is
expected to be sent on this link. This object will
be used in combination with cItpSpUtilSampleInterval,
cItpSpUtilThreshold and cItpSpLinkUtilThresholdRcvd to
g…
bits per secondCItpSpLinkCapacityr/w
Type Constraints:
range: 0
range: 56000..2147483647
.1.3.6.1.4.1.9.9.232.1.4.1.1.138
This object specifies the threshold used to generate the
cItpSpLinkRcvdUtilChange notification. The value of zero
indicates the threshold has not been defined at the link
level and the value from the cItpSpUtilThresho…
percentCItpSpPercentThresholdr/w
Type Constraints:
range: 0..100
.1.3.6.1.4.1.9.9.232.1.4.1.1.139
An estimate of the utilization of this link for traffic
sent on this link in the prior time period defined
by the cItpSpUtilSampleInterval object.
percentCItpSpLinkUtilization
Type Constraints:
range: 0..999
.1.3.6.1.4.1.9.9.232.1.4.1.1.140
Link Utilization State for out bound traffic.
CItpSpLinkUtilizationState
Type Values:
0unMonitored
1underThreshold
2overThreshold
.1.3.6.1.4.1.9.9.232.1.4.1.1.141
A count of the bytes sent on the link including the
additional bytes required by underlying protocols.
This provides a transport independent mechanism
for collection information on link utilization.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.232.1.4.1.1.142