CISCO-IETF-PW-MIB Table View

This table specifies information for connecting various 
emulated services to various tunnel type.

cpwVcEntry row .1.3.6.1.4.1.9.10.106.1.2.1

A row in this table represents an emulated virtual
connection (VC) across a packet network. It is indexed by
cpwVcIndex, which uniquely identifying a singular
connection.

Indexes

cpwVcIndex

Column	Syntax	OID
cpwVcIndex Index for the conceptual row identifying a VC within this PW Emulation VC table.	CISCO-IETF-PW-TC-MIBCpwVcIndexType	.1.3.6.1.4.1.9.10.106.1.2.1.1
cpwVcType This value indicate the service to be carried over this VC. Note: the exact set of VC types is yet to be worked out by the WG.	CISCO-IETF-PW-TC-MIBCpwVcTyper/w Type Values: 0 other 1 frameRelay 2 atmAal5Vcc 3 atmTransparent 4 ethernetVLAN 5 ethernet 6 hdlc 7 ppp 8 cep 9 atmVccCell 10 atmVpcCell 11 ethernetVPLS 12 e1Satop 13 t1Satop 14 e3Satop 15 t3Satop 16 basicCesPsn 17 basicTdmIp 18 tdmCasCesPsn 19 tdmCasTdmIp	.1.3.6.1.4.1.9.10.106.1.2.1.2
cpwVcOwner Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no maintenance protocol (PW signaling) is used to set-up the VC, i.e. require configurati…	Enumerationr/w Enumerated Values: 1 manual 2 maintenanceProtocol 3 other	.1.3.6.1.4.1.9.10.106.1.2.1.3
cpwVcPsnType Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB modules. For example, if mpls(1) is de…	Enumerationr/w Enumerated Values: 1 mpls 2 l2tp 3 ip 4 mplsOverIp 5 gre 6 other	.1.3.6.1.4.1.9.10.106.1.2.1.4
cpwVcSetUpPriority This object define the relative set-up priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal priority. Dropped VC will be set 'dorman…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.10.106.1.2.1.5
cpwVcHoldingPriority This object define the relative holding priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal priority. Dropped VC will be set 'dorma…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.10.106.1.2.1.6
cpwVcInboundMode This object is used to enable greater security for implementation that use per platform VC label space. In strict mode, packets coming from the PSN are accepted only from tunnels that are associated to the same VC…	Enumerationr/w Enumerated Values: 1 loose 2 strict	.1.3.6.1.4.1.9.10.106.1.2.1.7
cpwVcPeerAddrType Denotes the address type of the peer node maintenance protocol (signaling) address if PW maintenance protocol is used for the VC creation. It should be set to 'unknown' if PE/PW maintenance protocol is not used, i…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.106.1.2.1.8
cpwVcPeerAddr This object contains the value of of the peer node address of the PW/PE maintenance protocol entity. This object should contain a value of 0 if not relevant (manual configuration of the VC).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.106.1.2.1.9
cpwVcID Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.	CISCO-IETF-PW-TC-MIBCpwVcIDTyper/w	.1.3.6.1.4.1.9.10.106.1.2.1.10
cpwVcLocalGroupID Used in the Group ID field sent to the peer PWES within the maintenance protocol used for VC setup, zero if not used.	CISCO-IETF-PW-TC-MIBCpwGroupIDr/w	.1.3.6.1.4.1.9.10.106.1.2.1.11
cpwVcControlWord Define if the control word will be sent with each packet by the local node.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.106.1.2.1.12
cpwVcLocalIfMtu If not equal zero, the optional IfMtu object in the maintenance protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the …	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.106.1.2.1.13
cpwVcLocalIfString Each VC is associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the maintenance protocol will send the interface's name as app…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.106.1.2.1.14
cpwVcRemoteGroupID Obtained from the Group ID field as received via the maintenance protocol used for VC setup, zero if not used. Value of 0xFFFF shall be used if the object is yet to be defined by the VC maintenance protocol.	CISCO-IETF-PW-TC-MIBCpwGroupID	.1.3.6.1.4.1.9.10.106.1.2.1.15
cpwVcRemoteControlWord If maintenance protocol is used for VC establishment, this parameter indicates the received status of the control word usage, i.e. if packets will be received with control word or not. The value of 'notYetKnown' is…	Enumerationr/w Enumerated Values: 1 noControlWord 2 withControlWord 3 notYetKnown	.1.3.6.1.4.1.9.10.106.1.2.1.16
cpwVcRemoteIfMtu The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. Should be zero if this parameter is not available or not used.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.106.1.2.1.17
cpwVcRemoteIfString Indicate the interface description string as received by the maintenance protocol, MUST be NULL string if not applicable or not known yet.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.9.10.106.1.2.1.18
cpwVcOutboundVcLabel The VC label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC tag, for L2TP i…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.106.1.2.1.19
cpwVcInboundVcLabel The VC label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it represents the 20 bits of VC ta…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.106.1.2.1.20
cpwVcName The canonical name assigned to the VC.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.106.1.2.1.21
cpwVcDescr A textual string containing information about the VC. If there is no description this object contains a zero length string.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.106.1.2.1.22
cpwVcCreateTime System time when this VC was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.106.1.2.1.23
cpwVcUpTime Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in cpwVcOperStatus.)	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.106.1.2.1.24
cpwVcAdminStatus The desired operational status of this VC.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.9.10.106.1.2.1.25
cpwVcOperStatus Indicates the actual combined operational status of this VC. It is 'up' if both cpwVcInboundOperStatus and cpwVcOutboundOperStatus are in 'up' state. For all other values, if the VCs in both directions are of the …	CISCO-IETF-PW-TC-MIBCpwOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.9.10.106.1.2.1.26
cpwVcInboundOperStatus Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indications available at the service …	CISCO-IETF-PW-TC-MIBCpwOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.9.10.106.1.2.1.27
cpwVcOutboundOperStatus Indicates the actual operational status of this VC in the outbound direction - down: if PW signaling has not yet finished, or indications available at the service leve…	CISCO-IETF-PW-TC-MIBCpwOperStatus Type Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.9.10.106.1.2.1.28
cpwVcTimeElapsed The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current in…	Integer32 Constraints: range: 1-900	.1.3.6.1.4.1.9.10.106.1.2.1.29
cpwVcValidIntervals The number of previous 15-minute intervals for which data was collected. An agent with PW capability must be capable of supporting at least n intervals. The minimum value of n is 4, The default of n is 32 and the…	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.9.10.106.1.2.1.30
cpwVcRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.106.1.2.1.31
cpwVcStorageType This variable indicates the storage type for this object.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.10.106.1.2.1.32

This table provides per-VC performance information for the  
current interval.

cpwVcPerfCurrentEntry row .1.3.6.1.4.1.9.10.106.1.3.1

An entry in this table is created by the agent for
every VC.

Indexes

cpwVcIndex

Column	Syntax	OID
cpwVcPerfCurrentInHCPackets High capacity counter for number of packets received by the VC (from the PSN) in the current 15 minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.3.1.1
cpwVcPerfCurrentInHCBytes High capacity counter for number of bytes received by the VC (from the PSN) in the current 15 minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.3.1.2
cpwVcPerfCurrentOutHCPackets High capacity counter for number of packets forwarded by the VC (to the PSN) in the current 15 minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.3.1.3
cpwVcPerfCurrentOutHCBytes High capacity counter for number of bytes forwarded by the VC (to the PSN) in the current 15 minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.3.1.4

This table provides per-VC performance information for  
each interval.

cpwVcPerfIntervalEntry row .1.3.6.1.4.1.9.10.106.1.4.1

An entry in this table is created agent for every VC.

Indexes

cpwVcIndex cpwVcPerfIntervalNumber

Column	Syntax	OID
cpwVcPerfIntervalNumber A number N, between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified b…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.9.10.106.1.4.1.1
cpwVcPerfIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.106.1.4.1.2
cpwVcPerfIntervalTimeElapsed The duration of a particular interval in seconds. Adjustments in the system's time-of-day clock, may cause the interval to be greater or less than the normal value. Therefore this actual interval value is provided.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.10.106.1.4.1.3
cpwVcPerfIntervalInHCPackets High capacity counter for number of packets received by the VC (from the PSN) in a particular 15-minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.4.1.4
cpwVcPerfIntervalInHCBytes High capacity counter for number of bytes received by the VC (from the PSN) in a particular 15-minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.4.1.5
cpwVcPerfIntervalOutHCPackets High capacity counter for number of packets forwarded by the VC (to the PSN) in a particular 15-minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.4.1.6
cpwVcPerfIntervalOutHCBytes High capacity counter for number of bytes forwarded by the VC (to the PSN) in a particular 15-minute interval.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.4.1.7

This table provides per-VC Performance information from VC  
start time.

cpwVcPerfTotalEntry row .1.3.6.1.4.1.9.10.106.1.5.1

An entry in this table is created agent for every VC.

Indexes

cpwVcIndex

Column	Syntax	OID
cpwVcPerfTotalInHCPackets High capacity counter for number of packets received by the VC (from the PSN).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.5.1.1
cpwVcPerfTotalInHCBytes High capacity counter for number of bytes received by the VC (from the PSN).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.5.1.2
cpwVcPerfTotalOutHCPackets High capacity counter for number of packets forwarded by the VC (to the PSN).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.5.1.3
cpwVcPerfTotalOutHCBytes High capacity counter for number of bytes forwarded by the VC (to the PSN).	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.9.10.106.1.5.1.4
cpwVcPerfTotalDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this row Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization of …	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.10.106.1.5.1.5

This table provides reverse mapping of the existing VCs  
based on vc type and VC ID ordering. This table is  
typically useful for EMS ordered query of existing VCs.

cpwVcIdMappingEntry row .1.3.6.1.4.1.9.10.106.1.7.1

An entry in this table is created by the agent for every
VC configured by the cpwVcTable.

Indexes

cpwVcIdMappingVcType cpwVcIdMappingVcID cpwVcIdMappingPeerAddrType cpwVcIdMappingPeerAddr cpwVcIdMappingVcIndex

Column	Syntax	OID
cpwVcIdMappingVcType The VC type (indicate the service) of this VC.	CISCO-IETF-PW-TC-MIBCpwVcType Type Values: 0 other 1 frameRelay 2 atmAal5Vcc 3 atmTransparent 4 ethernetVLAN 5 ethernet 6 hdlc 7 ppp 8 cep 9 atmVccCell 10 atmVpcCell 11 ethernetVPLS 12 e1Satop 13 t1Satop 14 e3Satop 15 t3Satop 16 basicCesPsn 17 basicTdmIp 18 tdmCasCesPsn 19 tdmCasTdmIp	.1.3.6.1.4.1.9.10.106.1.7.1.1
cpwVcIdMappingVcID The VC ID of this VC. Zero if the VC is configured manually.	CISCO-IETF-PW-TC-MIBCpwVcIDType	.1.3.6.1.4.1.9.10.106.1.7.1.2
cpwVcIdMappingPeerAddrType IP address type of the peer node.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.106.1.7.1.3
cpwVcIdMappingPeerAddr IP address type of the peer node.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.106.1.7.1.4
cpwVcIdMappingVcIndex The value that represent the VC in the cpwVcTable.	CISCO-IETF-PW-TC-MIBCpwVcIndexType	.1.3.6.1.4.1.9.10.106.1.7.1.5

This table provides reverse mapping of the existing VCs  
based on vc type and VC ID ordering. This table is  
typically useful for EMS ordered query of existing VCs.

cpwVcPeerMappingEntry row .1.3.6.1.4.1.9.10.106.1.8.1

An entry in this table is created by the agent for every
VC configured in cpwVcTable.

Indexes

cpwVcPeerMappingPeerAddrType cpwVcPeerMappingPeerAddr cpwVcPeerMappingVcType cpwVcPeerMappingVcID cpwVcPeerMappingVcIndex

Column	Syntax	OID
cpwVcPeerMappingPeerAddrType IP address type of the peer node.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.10.106.1.8.1.1
cpwVcPeerMappingPeerAddr IP address type of the peer node.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.9.10.106.1.8.1.2
cpwVcPeerMappingVcType The VC type (indicate the service) of this VC.	CISCO-IETF-PW-TC-MIBCpwVcType Type Values: 0 other 1 frameRelay 2 atmAal5Vcc 3 atmTransparent 4 ethernetVLAN 5 ethernet 6 hdlc 7 ppp 8 cep 9 atmVccCell 10 atmVpcCell 11 ethernetVPLS 12 e1Satop 13 t1Satop 14 e3Satop 15 t3Satop 16 basicCesPsn 17 basicTdmIp 18 tdmCasCesPsn 19 tdmCasTdmIp	.1.3.6.1.4.1.9.10.106.1.8.1.3
cpwVcPeerMappingVcID The VC ID of this VC. Zero if the VC is configured manually.	CISCO-IETF-PW-TC-MIBCpwVcIDType	.1.3.6.1.4.1.9.10.106.1.8.1.4
cpwVcPeerMappingVcIndex The value that represent the VC in the cpwVcTable.	CISCO-IETF-PW-TC-MIBCpwVcIndexType	.1.3.6.1.4.1.9.10.106.1.8.1.5