cpwVcOutboundOperStatus

CISCO-IETF-PW-MIB · .1.3.6.1.4.1.9.10.106.1.2.1.28
MIB view Table view

Object

column CISCO-IETF-PW-TC-MIBCpwOperStatus 
Indicates the actual operational status of this VC in the  
outbound direction 
- down:           if PW signaling has not yet finished, or 
                  indications available at the service  
                  level indicate that the VC is not 
                  passing packets. 
- testing:        if AdminStatus at the VC level is set to  
                  test. 
- dormant:        The VC is not available because of the 
                  required resources are occupied VC with  
                  higher priority VCs . 
- notPresent:     Some component is missing to accomplish  
                  the set up of the VC. 
- lowerLayerDown: The underlying PSN is not in OperStatus  
                  'up'.

Context

MIB
CISCO-IETF-PW-MIB
OID
.1.3.6.1.4.1.9.10.106.1.2.1.28
Type
column
Access
readonly
Status
current
Parent
cpwVcEntry
Table
cpwVcTable
Siblings
31

Syntax

CISCO-IETF-PW-TC-MIBCpwOperStatus
Source
CISCO-IETF-PW-TC-MIBCpwOperStatus
Base type
Enumeration

Values & Constraints

Type Values
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cpwVcIndex
Index for the conceptual row identifying a VC within this PW Emulation VC table.
columnCISCO-IETF-PW-TC-MIBCpwVcIndexType.1.3.6.1.4.1.9.10.106.1.2.1.1
cpwVcID
Used in the outgoing VC ID field within the 'Virtual Circuit FEC Element' when LDP signaling is used or PW ID AVP for L2TP.
columnCISCO-IETF-PW-TC-MIBCpwVcIDType.1.3.6.1.4.1.9.10.106.1.2.1.10
cpwVcLocalGroupID
Used in the Group ID field sent to the peer PWES within the maintenance protocol used for VC setup, zero if not used.
columnCISCO-IETF-PW-TC-MIBCpwGroupID.1.3.6.1.4.1.9.10.106.1.2.1.11
cpwVcControlWord
Define if the control word will be sent with each packet by the local node.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.106.1.2.1.12
cpwVcLocalIfMtu
If not equal zero, the optional IfMtu object in the maintenance protocol will be sent with this value, representing the locally supported MTU size over the interface (or the…
columnUnsigned32.1.3.6.1.4.1.9.10.106.1.2.1.13
cpwVcLocalIfString
Each VC is associated to an interface (or a virtual interface) in the ifTable of the node as part of the service configuration. This object defines if the maintenance protoco…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.10.106.1.2.1.14
cpwVcRemoteGroupID
Obtained from the Group ID field as received via the maintenance protocol used for VC setup, zero if not used. Value of 0xFFFF shall be used if the object is yet to be defin…
columnCISCO-IETF-PW-TC-MIBCpwGroupID.1.3.6.1.4.1.9.10.106.1.2.1.15
cpwVcRemoteControlWord
If maintenance protocol is used for VC establishment, this parameter indicates the received status of the control word usage, i.e. if packets will be received with control wor…
columnEnumeration.1.3.6.1.4.1.9.10.106.1.2.1.16
cpwVcRemoteIfMtu
The remote interface MTU as (optionally) received from the remote node via the maintenance protocol. Should be zero if this parameter is not available or not used.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.10.106.1.2.1.17
cpwVcRemoteIfString
Indicate the interface description string as received by the maintenance protocol, MUST be NULL string if not applicable or not known yet.
columnOctetString.1.3.6.1.4.1.9.10.106.1.2.1.18
cpwVcOutboundVcLabel
The VC label used in the outbound direction (i.e. toward the PSN). It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS PSN, it repr…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.10.106.1.2.1.19
cpwVcType
This value indicate the service to be carried over this VC. Note: the exact set of VC types is yet to be worked out by the WG.
columnCISCO-IETF-PW-TC-MIBCpwVcType.1.3.6.1.4.1.9.10.106.1.2.1.2
cpwVcInboundVcLabel
The VC label used in the inbound direction (i.e. packets received from the PSN. It may be set up manually if owner is 'manual' or automatically otherwise. Examples: For MPLS …
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.10.106.1.2.1.20
cpwVcName
The canonical name assigned to the VC.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.106.1.2.1.21
cpwVcDescr
A textual string containing information about the VC. If there is no description this object contains a zero length string.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.10.106.1.2.1.22
cpwVcCreateTime
System time when this VC was created.
columnSNMPv2-TCTimeStamp.1.3.6.1.4.1.9.10.106.1.2.1.23
cpwVcUpTime
Number of consecutive ticks this VC has been 'up' in both directions together (i.e. 'up' is observed in cpwVcOperStatus.)
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.10.106.1.2.1.24
cpwVcAdminStatus
The desired operational status of this VC.
columnEnumeration.1.3.6.1.4.1.9.10.106.1.2.1.25
cpwVcOperStatus
Indicates the actual combined operational status of this VC. It is 'up' if both cpwVcInboundOperStatus and cpwVcOutboundOperStatus are in 'up' state. For all other values, i…
columnCISCO-IETF-PW-TC-MIBCpwOperStatus.1.3.6.1.4.1.9.10.106.1.2.1.26
cpwVcInboundOperStatus
Indicates the actual operational status of this VC in the inbound direction. - down: if PW signaling has not yet finished, or indica…
columnCISCO-IETF-PW-TC-MIBCpwOperStatus.1.3.6.1.4.1.9.10.106.1.2.1.27
cpwVcTimeElapsed
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the sys…
columnInteger32.1.3.6.1.4.1.9.10.106.1.2.1.29
cpwVcOwner
Set by the operator to indicate the protocol responsible for establishing this VC. Value 'manual' is used in all cases where no maintenance protocol (PW signaling) is used to…
columnEnumeration.1.3.6.1.4.1.9.10.106.1.2.1.3
cpwVcValidIntervals
The number of previous 15-minute intervals for which data was collected. An agent with PW capability must be capable of supporting at least n intervals. The minimum value of …
columnInteger32.1.3.6.1.4.1.9.10.106.1.2.1.30
cpwVcRowStatus
For creating, modifying, and deleting this row.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.10.106.1.2.1.31
cpwVcStorageType
This variable indicates the storage type for this object.
columnSNMPv2-TCStorageType.1.3.6.1.4.1.9.10.106.1.2.1.32
cpwVcPsnType
Set by the operator to indicate the PSN type on which this VC will be carried. Based on this object, the relevant PSN table entries are created in the in the PSN specific MIB …
columnEnumeration.1.3.6.1.4.1.9.10.106.1.2.1.4
cpwVcSetUpPriority
This object define the relative set-up priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal …
columnInteger32.1.3.6.1.4.1.9.10.106.1.2.1.5
cpwVcHoldingPriority
This object define the relative holding priority of the VC in a lowest-to-highest fashion, where 0 is the highest priority. VCs with the same priority are treated with equal…
columnInteger32.1.3.6.1.4.1.9.10.106.1.2.1.6
cpwVcInboundMode
This object is used to enable greater security for implementation that use per platform VC label space. In strict mode, packets coming from the PSN are accepted only from tu…
columnEnumeration.1.3.6.1.4.1.9.10.106.1.2.1.7
cpwVcPeerAddrType
Denotes the address type of the peer node maintenance protocol (signaling) address if PW maintenance protocol is used for the VC creation. It should be set to 'unknown' if PE/…
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.10.106.1.2.1.8
cpwVcPeerAddr
This object contains the value of of the peer node address of the PW/PE maintenance protocol entity. This object should contain a value of 0 if not relevant (manual configura…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.10.106.1.2.1.9